Is this possible - having a emulator software in portal

gurus,
my client has the following requirement -
client has a IBM AS 400 emulator software, called extra. they run this software, which connects them to AS 400 and thru which they run AS 400 reports.
the requirement is to run this emulator software from within the portal.
for example - the emulator software would be a portal 'item' which, when clicked runs the emulator software and takes the user to the AS 400 env.
how can this be done .. ? has anyone done this before ... ?
any ideas would be greatly appreciated.
one way i was thinking is to have the MIME type of the emulator software in the 9iAS and see if it works ...
thanx a lot
null

Is this emulator software web-enabled? If so, you can put a URL link to the location of the emulator to run it.
If not, you may be able to hack it via a HTML file with a URL call as follows:
Run Extra
but this is a bit flaky and relies on the emulator being on the same place on every PC.
Regards,
John

Similar Messages

My quicktime is very jerky with 1080p video but when I play the video file in FCPX its smooth. I recently upgraded to OS mavericks on iMac with 16gb of ram and should not be having this problem. Is it possible to reinstall older software?

My quicktime is very jerky with 1080p video but when I play the video file in FCPX its smooth. I recently upgraded to OS mavericks on 2011 iMac with 16gb of ram and should not be having this problem. Is it possible to reinstall older software? I cant figure whats causing the jerky video so I'm assuming its the new OS. Any one have any suggestions?

I have the same but not the same problem. When I play a sound or a video on a website (other than youtube)on safari, a weird nois is comeing from the speakers, the sound has pops/clicks but if I play the same video/sound on mozilla it works fine.. If wnyone know what's the problem.. please let us know

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

Feature Request: I want Firefox 4 to remember search history, but not form data, without having to use a third-party plug-in. Is this possible now and I am just not seeing it?

I don't like having Firefox (or any browser for that matter) remembering any form history, as I do not see this as secure data storage (IT security/network engineer). Currently the only way to disable this is to also disable search history, which is a useful tool to have, and I am not worried about the security of that data (I don't search for sensitive data). I would like to see these two options under the Privacy->Custom Settings Preference to be separated so that people can more finely control what of their data is stored.
Is this possible without the use of third-party plugins?

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

I am having trouble with my hotmail emails and want to get rid of them and start to use icloud emails instead. Is this possible?

I am having problems with my hotmail and live emails and want to cancel them and use icloud email instead, is this possible and how do I do it by creating icloud emails, and using icloud emails

See the link below for how to sign up for and set up an iCloud account, including an @icloud.com email address:
http://www.apple.com/icloud/setup/
You'll need to update your Mac OS to 10.7.5 or later.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

2008 R2 Multi-Site Cluster Possible without Third Party Software?

2008 R2 Multi-Site Cluster Possible without Third Party Software? I know it has been asked, but I haven't seen a specific answer. We are using Dell Compellent Storage and I created several read only replicated volumes at our DR site. I
am having issues failing over to the volumes after I use cluster cli to mount the read only volumes.
Any help would be appreciated greatly!

2008 R2 Multi-Site Cluster Possible without Third Party Software? I know it has been asked, but I haven't seen a specific answer. We are using Dell Compellent Storage and I created several read only replicated volumes at our DR site. I
am having issues failing over to the volumes after I use cluster cli to mount the read only volumes.
Any help would be appreciated greatly!
To have this working reliably you need to have 1) redundant and pretty fatty pipes between your sites (Primary and Disaster Recovery) and 2) your storage (Compellent in your case) being placed in third location. If you'll have both conditions met you'll
have decent performance and would avoid brain split issue when both sites would be up and uplink between sites is down. Good links on geo clustering:
Geo Cluster for Windows
http://clusteringformeremortals.com/2009/09/15/step-by-step-configuring-a-2-node-multi-site-cluster-on-windows-server-2008-r2-%E2%80%93-part-1/
Geo
Cluster for Windows 2008
http://blogs.technet.com/b/johnbaker/archive/2008/03/28/windows-server-2008-geo-clustering-multi-site-clustering.aspx
Geographically Dispersed Clustering
http://msmvps.com/blogs/jtoner/
Hope this helped :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

HT204476 is there anyway to get rid of the old iPhoto Library? It defeats the purpose of having a new software if I have to keep the remnants of the older one.

is there anyway to get rid of the old iPhoto Library? It defeats the purpose of having a new software if I have to keep the remnants of the older one.

dubthedankest wrote:
Where are the masters actually stored upon conversion from Aperture to Photos? Photos?
The master files are stored on your drive, but they are not actually stored "in" any folder. Folders are really just special files that store various bits of information about the files associated with that folder, including links to where they actually are stored. That's why you can "move" a file from one folder to another very quickly: all that you really are doing is moving the link & other info from one folder to the other folder, while the file itself stays where it was.
Because of this, it is possible for more than one folder to link to the same file -- in the Finder it looks just like there are two copies of the file, one in each folder, but there really is just the one copy. From the description in the Photos saves disk space by sharing images with your iPhoto or Aperture libraries doc, it looks like that's what happens when you import your iPhoto library into Photos -- both the old iPhoto Library "file" (which actually is a set of folders & subfolders of files) & the Photos Library (also consisting of folders & files) contain links to the master files, but like the Apple doc says, there really is just one set of master files being stored.
This is very similar to the way Time Machine backups look like they have multiple copies of the same unique file, one in each time-stamped backup folder, but there really is only one copy on the Time Machine drive. My guess is Apple is using hard links for this, which means the actual master files will not be deleted from the file system as long as at least one link remains to each of them.
So you should be safe in deleting the old iPhotos Library once you are absolutely sure you don't need it, but to be sure, if it was me I would make a backup just in case, or better yet just leave it alone.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Is this possible: SNC connection from SAP GUI to SAP Router, and ...

Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek Majchrowski

Wolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
Regards.

I want to buy a Ipod Nano 16gb and it says it holds up to 4,000 songs, and 16 hours of video but on my Itunes I have 2,593 songs and it says I have 19.88 gb. How is this possible?

I want to buy a Ipod Nano 16gb that says it holds up to 4,000 songs, 16 hours of video, and 14,000 pictures. On my Itunes Library, I have 2,593 songs and it says I have 19.88 gb just of songs. How is this possible? If I buy the Nano, will I not be able to have all my songs on the ipod? The music is my first and only prioarity. I want to be able to have up to at least 3,000 songs, even if that means not having video or pictures. Can someone please help me?

Daniella04 wrote:
I want to buy a Ipod Nano 16gb that says it holds up to 4,000 songs, 16 hours of video, and 14,000 pictures. On my Itunes Library, I have 2,593 songs and it says I have 19.88 gb just of songs. How is this possible? If I buy the Nano, will I not be able to have all my songs on the ipod? The music is my first and only prioarity. I want to be able to have up to at least 3,000 songs, even if that means not having video or pictures. Can someone please help me?
Daniella,
The estimated song capacities, such as 4000 songs in 16 GB, are based on 4 minute songs of 4 MB each, which is what you get at 128 encoding.
Most of us nowadays use well above 128. (For example, the iTunes Store and Amazon MP3 both sell songs only in 256.)
However, you can still make more songs fit! When you sync your iPod, use the option to "convert higher bit rate songs," as pictured. Choose 128. This fits more on the iPod, but does not change the songs in your library.

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone ag

I just got my replacement phone from Warranty. The phone was on for just 2 hours and it crashed. I was told that motorola knows about this "possible" issue. I got a new sim, hard reset, If it can be done I did it. They are now sending me the same phone again. Number 3. I would hope this one doesn't crash but I rather have a different phone so I can enjoy using my account. The phone's most recent error was today. " Unfortunately, the process com.motorola.widget.circlewidget3d" has stopped. At least the error message works and it's polite. I told tech this and they could not answer my question or help me other then "let's do a hard reset" My warranty replacement is coming on Monday. Let's hope this one works. Anyone else havinbg the same problem. it says "such and such as stop working" on all sorts of stuff! Help! I want my iPhone Back!

I just did a google search on this issue. OMG, I got a ton of videos on this or similar issues. Each one says in some way to clear the cache, reset the data, etc. Why in the world would this continue to happen and they not do a fix that resloves this without having to lose or stop what your doing. This is a very long and constant issue it seems with Android phones as there must have been pages and pages of what I now call "Unfortunately" So I am going to pray that Verizon helps me out and gets me away from this issue and helps me go back to iPhone or try the Samsung.

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

Is this possible - having a emulator software in portal

Similar Messages

Maybe you are looking for