Is this possible - I have 10hrs of video but each DVD only needs about 10min

I did a 10 hour dance event and I need to make custom DVD's for each customer that usually only include 3 or 4 songs. Each DVD is different. I don't need the whole 10 hours.
Will Encore lay down just the video I need or will I have to cut away all of the extranious stuff so it's under 4.7 Gigs?
Andy

Alternatively, use After Effects (if you have it) to trim the clips down, add fades/titles/effects/etc to the clip and then import them into Encore via Dynamic Link. This would prevent you from having to wait on rendered files from PPro.
Even if you don't want to mess with Dynamic Link, you could still batch render all of your files out of After Effects overnight. The trick here is whether or not you have After Effects...........?

Similar Messages

  • HT1399 Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    Why cant I create a playlist for my music/song videos? Continuous play is also not possible in the video app on the phone!!!! previously, prior to IOS 6, it was possible to have both music videos & songs mixed in the same playlist in the music app

    I am back with an update. I turned off Match on both the ipad and the iphone 5. By doing so I was able to sync my Iphone and ipad to itunes and store the music on my devices rather than the slow streaming.  So far this has fixed my problems with the iphone I have all my music, playlist, most of the album art and so on.  But the ipad is a different story.  I have the music and artist but not one playlist  I am sure Apple will have an upgrade soon that will address these issues they are usually very good about this. 
    Now have any of you experienced another problem that has existed as long as I have used faces in Aperture.
    I have over 200 faces and they are organized a-z problem is I have this going on A-Z folowed by a few that start over A-Z followed by another few A-Z and again a 4th time A-Z.  Imagine how difficult it is while I am showing someone the great features of my iphone, ipad and imac.  Which I do talk highly of all the time.  But how do I explain that even though their name starts with a or b or what ever they are not important enough to me to be in the first list of A-Z or even the 2nd or 3rd list of A-Z someohow they are in the 4th section of the list!!!!
    I have managed to get the Imac to fix this but for some reason the IOS devices do not.   Any ideas?
    Thanks Al

  • Ipod touch 4th generation "could not be synced because this computer is no longer authorized for purchased items that are on this ipod". Have authorized via "Store", but will not allow.

    My ipod touch 4th generation "could not be synced because this computer is no longer authorized for purchased items that are on this ipod". Have authorized via "Store", but will not allow.

    Are you sure you authorized it for the ID)s) that purched all the media on the iPod?
    If so them maybe:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

  • Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

    hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

    Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
    Clinton

  • HT201269 Hi I want to back up my photos from my iPhone 5. How can I do this? I have an iPad mini but cannot sync to an iPhone as iPad does not have USB port. Can you help please x

    Hi I want to back up my photos from my iPhone 5. How can I do this? I have an iPad mini but cannot sync to an iPhone as iPad does not have USB port. Can you help please

    You have to back them up to a computer. You would import them either to iPhoto or to the Photos app in your PC:
    http://support.apple.com/kb/ht4083
    Cheers,
    GB

  • My Adobe programs were deleted as my hard drive was replaced. I still have the serial number but each time I try to re-download it says the serial number is not valid.

    My Adobe programs were deleted as my hard drive was replaced. I still have the serial number but each time I try to re-download it says the serial number is not valid.

    Error "The serial number is not valid for this product" | Creative Suite
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • I want to download Elements 12 to a new computer. I have the key code but no DVD.

    I want to download Elements 12 to a new computer. I have the key code but no DVD. Adobe Chat was unable to tell me how to do it. Does anyone know how to activate an earlier version (they're now at Elements 13)?

    Download the PSE12 installer from Download Photoshop Elements products | 13, 12, 11, 10
    Install then enter your serial number when prompted.

  • On Apple TV my photo stream only shows six pictures - how do I get all photos to use as a screen saver. I have reset several times but it still only finds six pictures!!!!

    On Apple TV my photo stream only shows six pictures - how do I get all photos to use as a screen saver. I have reset several times but it still only finds six pictures!!!!

    I recently got apple tv but the photo stream only seems to show up those photos which I took in September and no others (ie. 20 out of around 100).  Any ideas why the earlier photos on my photo stream in ipad don't show up on apple tv? 

  • I have 8gb of storage but i can only use 6gb, why?

    i have 8gb of storage but i can only use 6gb, why?

    BBecause the software to run the phone takes up some space.

  • I have an Ipod Touch that is in recovery mode right now.  I hooked it up to iTunes, and followed the steps to restore it, but it will only restore about a quarters worth of the bar.  How do I get it to load past that certain point?

    I have an Ipod Touch that is in recovery mode right now.  I hooked it up to iTunes, and followed the steps to restore it, but it will only restore about a quarter of the bar.  How do I get it to load past that certain point?

    - Reboot the computer
    - Try another USB port and cable
    - Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • We have 2 mac books but i tv only recognizes one of them even after doing a reset

    we have 2 mac books but i tv only recognizes one of them even after doing a reset

    Welcome to the Apple Community.
    Are you using the same homesharing ID for both computers, are they on the same network.

  • Is it possible to have a Flash video activate content outside of the video at predetermined times along the video timeline?

    I am creating educational videos and would like to set points within a video that will make things happen on the website, either a different window or the same window as the video. Is this possible? I'm not a web developer so posting how to do it won't do me much good. However, if it is possible, I'll need someone to program a user configurable system so I can set this link points as I produce videos. Thank you very much for your time.
    GT

    yes, you can use cue points to trigger events.
    if you're looking to hire someone to do this, send me an email via my website:  www.kglad.com
    if you're looking for someone to do this for you without charge, you'll want to post your message on as many message boards as you can.

  • Is it possible to have a client in QAS that has ONLY Configuration?

    I've been informed that one of our migration consultants requires a new client created with ONLY configuration.
    Is this possible?
    Anyone Please advise on your expriences and how is client copy involved?
    Thank you ALL in advance
    maria

    Thank You very much Joe!  I needed that confirmation.
    I am currently running a client copy in our sandbox using SCCL, and profile SAP_CUST
    as the profile indicates it will bring only configuration including authorization profiles, will it bring all userids as well?
    or will I have to provide access to the users that will be doing work in that new client
    I know we can do SCCL using SAP_USER that should bring over only users, auth. etc., and not damage any existing data (configuration) that was brought over with SAP_CUST
    is that a correct conclusion?
    Maria

  • Is this because I have the wrong speed of blank DVD disks?

    Hi,
    I'm using Toast 6.1.1 to try to write to a 8X 8.5GB DVD+R Dual Layer blank disk on an LG GSA-5120D Super Multi DVD Rewriter which is external and connected via Firewire. Writing to all other disks (DVD and CD) has been fine but not the previously mentioned DL disk. I get this from Toast before it starts to write at all I think:
    The drive reported an error:
    Sense Key = MEDIUM ERROR
    Sense Code = 0x0C
    WRITE ERROR
    In the drive's manual it says this for Read/Write speed:
    Write: DVD+R Double layer: 2.4X
    Read: DVD+R Double layer: 8X
    Again the disks I'm attempting to use are: 8X 8.5GB DVD+R Dual Layer so that looks OK (possibly?) but Toast only gives the speed 4X for this disk.
    I think my trouble might be Firmware but just want to eliminate this possible problem. The fact that the manual says 8X for the read speed makes the disks I've bought OK? even though it says 2.4X for write?
    TIA,
    John.

    Thanks for the reply.
    Oh that's fine -- so long as they'll work at some speed. I was starting to think that because I had bought 8X speed disks and in the drive's manual it says 2.4X speed for writing to DL disks they weren't going to be compatible. Funny how Toast only gives 4X as the speed for the disk (seeing as 2.4X is the fastest the drive will do for writing to DL disks). I guess it is a firmware problem I'm having then.
    Thanks.

Maybe you are looking for