Is this possible to add one page under 2 tabs conditionally in Oracle 10g

Hello All,
Is this possible to add one page under 2 tabs conditionally.
Lets say i have created one page "Page 1" under "Tab 1". Now i want the same page to be displayed fom another tab also.i.e. from "Tab 2" from the same application.I want to avoid creating copy of this page.
Such that when i am in Tab 1 and going to this page ,the newly created page should show tab as Tab1.Similarly if i am going to Page 1 from Tab 2 ,the newly created page should show tab as Tab2.
What can i do for this.
Thanks
Swapna

Swapna,
For Tab1 and Tab2, set the 'tab page' as 1 under 'current for pages' while you edit the tabs. This would add page 1 under two tabs, tab1 and tab2.
Regards,
Hari

Similar Messages

Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?

Hi Experts,
Is that possible to add one chracteristic which is in one cube to another cube which doesn't have that ?
I want to do it with out using a multiprovider or virtual cube.
The scenario is ,
I have two cubes -Z_XXX;Z_YYY
Now Based on the client's requirement,(i.e. a report development) I can get all the chracteristics and key figures from cube Z_XXX except one key figure.
Now that keyfigure is available in the other cube (Z_YYY).
Now I want to add this particular characteristic in this Z_XXX cube & I don't want to use multiprovider or something like that.
Please help me.

HI Sumit,
Please find the link containg all details :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00ddebe-cc48-2b10-758a-8008e63d6826?QuickLink=index&…
Also , in case it is an attribute of existing characteristic, make it navigational and it will be avaible in Cube, just check the check box for same.
Thanks and Regards,
Amit.

Pages for iOS on iPad - is it possible to add a dot leader tab?

Hi All,
I appreciate any help and thank you in advance...and apologize if this is a poor question, but searching around hasn't yielded any help.
Is it possible in Pages for iOS to add a dot leader tab?
I.e. Chapter One .......................................... 3.
I suspect not, but welcome any help.
Thanks!

Correct that you cannot create this in ios Pages, but if you have a document or document template that was created on the Mac, then ios Pages will still have that function attached to that particular tab. Whacky huh.
With only a dozen or so features, I personally don't see that ios or icloud Pages is very useful, but I guess it is still in beta with more features to come.

Is it possible to make one page of your website private?

i have a public website but want to make one photo page password protected so i can test the images out with select friends (artwork). is this possible or is password for the entire site only?

No. But you can create a second site with those photos, protect it and link to it from your public site.
You can even have the page of the protected site appear in the navbar of your public site this way:
1 - create and publish the protected site
2 - in your public site create a blank page and name it for the protected page.
2 - add an HTML snippet with the following code to the blank page:
<script type="text/javascript">
parent.window.location = "URL TO SITE/PAGE YOU WANT TO REDIRET TO"; </script>
Thanks to Cyclosaurus for the code
When a visitor clicks on the link in the public site they will be immediately redirected to the protected site/page. You can add a similar blank page to the protected site to send visitors back to the public site.
The Contents page of my demo sites (3 of them) are setup that way. I only have to edit one page (in the Contents site) instead of the Contents page of each of the three demo sites. Go to this page in Demo_1 (Embedtests) and click on the Contents link. Watch the URL field as you're taken to the Contents page.
OT

Is it possible to add a page in MUSE without it adding corresponding link in Menu Widget?

I'm building a website that has just three main linked pages. However, I want to add additional pages to the site but not have their links show up in the main menu widget. Is this possible?

Hey thanks, mac-heibu,
That was sooo darn easy. I overlooked it.

Possible to add sub-pages ?

Hello,
I began to create a site in iWeb. For presentation and organisation issues, I would like to add subpages to it -i.e. to have pages links that shows only on a certain page and not the navigation menu)
Example:
On the site there is a page of picture gallery. I only want "picture gallery" to show in the menu, but yet, organige in many pages (category) those photos, with link only to appeir in the "picture Gallery" presentation page only.
Is this possible with iWeb ?
How could possibly do so ?
Thank you

http://web.mac.com/will.englefield/iWeb/WillG4PB/PageTab.html
Just uncheck the box to include it in the nav bar.

If possible to add sorry page for 443 port?

I have configuration as:
content myweb-443
vip address 10.1.1.10
port 443
protocol tcp
balance leastconn
add service myweb-myhost-443
active
service myweb-myhost-443
ip address 10.4.4.23
protocol tcp
port 443
keepalive type tcp
keepalive port 443
active
now, my client want to add sorry page, http://mysorrypage.mydomain.
Could anyone confirm, if it can be done?
what about a sorry page https://mysorrypage2.mydomain?
If so, how to do it?
Any comments will be appreciated
Thanks in advance

you can't send a redirect to a sorry page since the traffic is encrypted.
The only way would be if you had an ssl module to do the encryption.
You can try to use another remote server as a sorryserver and this server would print an error message if it can do ssl.
Gilles.

Is it possible to add 'Additional Data C' tab in VA01/VA02/VA03

Hi All,
Is there any way or in config that we can enhance the VA01/VA02/VA02 with one more tab other than 'Additional Data B' tab.
i want to add 'Additional Data C' tab for a requirement.
Please give your valuable comments.
Thanks,
Jaffer Ali.S

Hi ,
It can't done for the VA01/VA02/VA03.
these are available for the .
V45A0001 Determine alternative materials for product selection --->The Description of this enhancement tell us that it determines the alternative materials for product selection. (i.e., If one material is not available what is the other material that has to be used as an alternative. So it is item specific).
V45A0002 Predefine sold-to party in sales document--->By Description we understand that we can predefine sold-to party in the sales document. (i.e., it is used to populate the field sold-to party through user-exit while entering the data. ) But our requirement comes after entering the data in the screen and save button is pressed.
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal---->Copy packing proposal Into Out bound delivery. This description implies that whenever we create a Delivery Order from Sales Order it copies the packing proposal Based on the already created Sales order. So, there is no chance for us to save the data while we create or change a Sales order.
We can't done.
Regards,
Bharani

Without EEWB Is it Possible to add field to standard tab

Hi Experts!
Without EEWB and enhancing Screen Is it Possible to adding field to standard tab. Any body can help out in this.
URGENT
Thanks
vikram.c

Yes it is possible, but we are talking a modification of SAP standard here. Also the effort needed will be at least 10 times higher than using EEWB as you have to reprogram all generated code / screen helps that SAP provides. Moreover these fields are then still not exchanged with the interfaces / BDocs etc which will be also some more days of work. There is no usable documentation on this - at least not by SAP and I am not aware of another one. It is much easier to create an EEWB enhancement and then move the fields from one tab to another.
Doing this all by hand is like adding a second processor to an existing motherboard for more performance compared to exchanging the existing one with one of higher specifications.This is possible, but requires a) more work/time/material b) more experience c) you lose warranty d) in the end you do not know for sure what the outcome will be
Regards, Kai

Sql statement add an "N" literal wher reporting trough oracle 10g and lib eclipse

<p>the same select created with crystal report 9 and oracle 8.04 with crystal report XI and oracle 10G have some difference. In the crystal report XI the statement contains an 'N' literal that should not be there.</p><p>I have used the Service pack 1 of Business Object XI r2 on the server and here i haven't problem.</p><p>When I use the same report throught an applet with the CRXI library's I have the problem of "N" literal</p><p>I work with Eclipse, java, CRXI, and oracle10g</p>

JRC/Crystal Report XI generated SQL automatically add an "N" literal in front of some values which can not even execute in the SQL*Plus.

Is it possible to add the page title to the menu bar?

Does anyone know of any addons that allow you to add the webpage title to the menu bar? I already took a look at the addon Personal Titlebar, which purports to add the menu bar onto the title bar, but had no luck getting it to actually do what it advertised.
I like the way the menu bar looks beside the orange Firefox button, but would also like to be able to see the full page title in the blank space between "Help" and the title bar buttons (min/zoom/close). I don't want to enable the actual full title bar. That would be a waste of space.

That creates a title bar on top of the existing menu bar, which is what I want to avoid. I was hoping someone had created a way to combine the two easily, rather than having them exist as separate bars using double the screen real estate and leaving giant unused areas.
I was hoping for something more like what I mocked up in the included image. The top is with the title bar enabled, the bottom is the preferred result.

Should we rename this forum or add one for CRM 7.0?

Hi Stephen,
Can we have a new forum for SAP CRM 7.0 as well just like we have it for SAP CRM 2007?
Regards,
Harshit

Harshit,
Actually I'm wondering if it would be better to focus this forum more to CRM Webclient UI questions instead of just being CRM 2007. CRM 7.0 is more an evolution of CRM 2007, so the technical question set would just be some additional deltas on top of the questions right now. If you look at the PCUI we don't have a CRM 40 PCUI forum nor a CRM 50 PCUI forum.
So I'm going to make your question a sticky and rename it slightly to see if we can some more thoughts.
My initial proposal would be the following:
Rename this forum CRM Webclient ( CRM 2007 and beyond )
Add a new forum for CRM Middleware questions
After we get some community feedback, I will send in the comments to folks at SAP that manage the organization of these forums If there is a strong opinion to do something, I'm sure they will take a look and make some adjustments.
What do you think?
Thank you,
Stephen

Plugin container exe uses half of the cpu and that heats the motherboard, cores. some times temperature in motherboard is about 90 degree which is unacceptable. it is like that even only one page or tab is open. regards

computer features(hp pavilion dv5)
intel centrino2 inside
2.26 hz,
4gb of ram,

Ive downgraded from FF4 to 3.6 at this point. The CPU usage is out of control on OS X.

Create pop-up window before submitting the page under some condition

I am a newbie on APEX. Anyone can help with the folowing scenario?
After validation, in some condition (PL/SQL), I am trying to create a pop-up window with "save" and "cancel" button. If user select "save", it will go to process the page (save the record), if user chooses "cancel", it will stay on the original screen.
Anyway I can do it?

Hello,
Do you mean you would like to have something like when you click on the delete button?
A popup to confirm?
Otherwise in APEX you've conditions, so you can select for the process for which button it needs to fire. Same for the branches (after the processes where the page is going to).
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Is it possible to take incremental logical backups via EXPDP in Oracle 10g

Guys,
I am curious that can EXPDP be used to take the incremental logical backups. If so then please let me know how it is possible.
Regards
Asif

There is no incremental specification clause like the one in the export command (INCTYPE). If you ever used the export incremental option, IMO it was not actually an incremental export, it was just enough for a table to change one row to consider the complete Table to be exported on the next exp execution. Not quite a practical approach, overall considering that regularly the more sized tables are those that frequently change.
~ Madrid

Is this possible to add one page under 2 tabs conditionally in Oracle 10g

Similar Messages

Maybe you are looking for