Is this possible to connect Trex 6 To EP7?

Hi Experts,
We did instal Trex 6.0 and it's working with EP6 Portal, now We install a Sandbox EP7 to do some test, I'm just wondering can I connect this to current Trex or I should install new Trex 7.0?
Thanks,
Matryam

Francesco, as long as I know it's WLS 5.1 that doesn't support WTC and not Tuxedo
6.5. We are using Tuxedo 6.5 and WLS 6.1.
The xml configuration file is only on the WTC (therefore WLS) side.
But you also need to modify the Tuxedo configuration file.
There are some messages posted to this newsgroup that tell you how to configure
both sides.
Ciao,
Stefano
"Francesco" <[email protected]> wrote:
>
Hi all,
We need to invoke EJBs located on WLS 5.1 from Tuxedo 6.5
Is it possible via WTC or do we need to use a newer version or Tuxedo
I have read the WTC docs and they speak about an XML Configuration File(ref.
"Create
a Configuration File").
But as much as I know Tuxedo 6.5 uses plain text config files.
Can anybody suggest me the right steps for creating a configuration file
with
the versions of Tuxedo and WLS that I have mentioned?
Thanks a lot
Francesco

Similar Messages

Is this possible: SNC connection from SAP GUI to SAP Router, and ...

Hi,
I have (stupid perhaps) question.
Is this scenario possible:
SNC connection from SAP GUI to SAP Router, and non-SNC connection from SAP Router to SAP System.
I know how to set up scenario like this:
SAP System --- (non-SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP GUI.
Best regards,
Marek Majchrowski

Wolfgang,
To be sure myself and Marek understand, can you confirm the different scenarios supported:
Scenario 1:
SAP GUI --- (non SNC conn) --- saprouter1 --- (SNC conn) --- saprouter2 --- (non-SNC conn) --- SAP System
With this scenario, it would be possible for a user to logon using SAP GUI onto the SAP System, but without SAP GUI SNC.
Scenario 2:
SAP GUI --- (SNC conn) --- saprouter1 --- (non SNC conn) --- saprouter2 --- (SNC conn) --- SAP System
With this scenario it would be possible to logon to the SAP System using SAP GUI, and using SNC authentication.
Also, with this scenario the SAP GUI software and SAP System software would consider this to be similar to:
SAP GUI -- (SNC conn) -- SAP System
Scenario 3:
This is the scenario mentioned by Marek in his initial question:
SAP GUI -- (SNC conn) -- saprouter1 -- (non SNC conn) -- SAP System
With this scenario it will not be possible to logon to SAP System using SNC, and only possible if the SAP GUI is configured to not use SNC. In other words the SNC connection between SAP GUI and saprouter1 is available, but cannot be used.
Thanks,
Tim
Edited by: Tim Alsop on Feb 25, 2008 5:24 PM

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect a separate hard drive?

I want to use my airport time capsule as a network attached storage solution, is this possible or do I need to connect it to a separate hard drive?

The Time Capsule is by default a network hard drive, but it has no "brains" of it's own. So, it cannot function as a stand alone media server if that is what you are asking.
If you are also using the Time Capsule hard drive for Time Machine backups of your Mac(s), then there may be struggle for available space on the drive since it is not possible to partition the Time Capsule drive in a traditional manner.
If space is getting tight on the Time Capsule, it might be a good idea to connect a drive to the USB port on the Time Capsule and use that drive for your network storage needs.

Lost Mode and Play Sound are "Pending." However, iCloud indicates that it connected and backed up to iCloud at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)

Hi,
My wife lost her iPhone two weeks ago while on vacation in London (cell service inoperative in foreign country). Using Find My iPhone app on my device, I activated Lost Mode and Play Sound. However, both are listed as "Pending," since it those actions require the phone to connect to the internet (wifi only due to no cellular data coverage.).
We recently returned home and purchased a new iPhone.
However, when looking to restore the apps/settings from her old phone using a previous iCloud backup, iCloud indicates that the old phone connected to iCloud and backed up the original phone at a date that is 1 week after it went missing. How is this possible without locking (Lost Mode Pending an internet connection)?
If the phone was activated and connected to the internet via a wifi signal, shouldn't it immedately lock, show up on the map, Play Sound, and send me an email that the phone has been found?
I also read somewhere that if running iOS 7, the iCloud website interface enables you to track previous locations, for instance if the phone moves from wifi hotspot to hotspot. Is that true? If so, how do I do that?
Thank you for your time, and have a great day!
Sincerely,
- Matt

just giving this a wee bump as time is of the essence here and i need advice/ answers quick!
apologies if i've broke any rules!
alex

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

I do have wifi connection but no internet, how is this possible? I logged in to the internet at my friends place and when I got home my own internet was not working anymore

This is possible to be connected to WiFi but not internet.
You connect to your modem/router via WiFi and whether it is connected to the internet or configured properly to route the internet to WiFi devices is a different story.
Now if you've already reset your WiFi (try disabling and enabling) and perhaps even restarting your MBP
Then make sure that your modem/router is connected to the internet.
You can try any other device, lights on the modem/router or use Eth cable to test.
Report back your findings.

Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

You can try using Screen Sharing in the Sharing preferences. Or try a third-party utility such as ScreenRecycler.

I need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

i need to connect my Imac 27'' (newest version) up to 3/4 monitors (all 40'' LCD tv's with VGA and HDMI connections) with extended display to all external screens, not duplicate images. Is this possible?

I would suggest you visit an Apple dealer, preferably an Apple Store if there's one in your city, and ask for assistance in determining what you need. The questions and issues you bring up are rather complex to address in a technical support forum and would be better addressed in person where you and the salesperson can ask questions back and forth to arrive at the optimal setup.
Regards.

I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

You may get a better response in this community:
https://discussions.apple.com/community/app_store/garageband_for_ios

HT3798 my iPod was originally connect to an old HP. The HP has since died and now I own a Macbook pro. I want to transfer the music from my iPod (originally synced with the HP) to my Macbook Pro. Is this possible without losing the music on my iPod?

my iPod was originally connect to an old HP. The HP has since died and now I own a Macbook pro. I want to transfer the music from my iPod (originally synced with the HP) to my Macbook Pro. Is this possible without losing the music on my iPod?

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible?

I would like to connect my Ipad 2 wirelessly via 3G with a wireless rooter. The Ipad does not have a slot for a card, so it will have to connect to the rooter via bluetooth. Is this possible? If so, where can I buy such a rooter? Many thanks! Ina

I'm not really understanding what you want. You mention all 3 types of connections: wireless, 3G and bluetooth, but I'm not clear on what you want to do. What the router is supposed to do, and why do you think it would need to connect via bluetooth?
I'm thinking you want to buy a Mifi type device that will allow you to connect to a cellular network and then connect the iPad to that device via the Wifi network the Mifi produces.
Is that so?

Is it possible to connect a second monitor to this PC

Is it possible to connect a second monitor to this PC and if so how o I do that?

Hello @southwater,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are looking to see if you can connect a second monitor to your computer and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

I want to transfer files from a Win XP PC to a Mac using Time Capsule via Ethernet connection. Is this possible?

I want to transfer files from a Win XP PC to a Mac using Time Capsule via Ethernet connection. Is this possible?

Sure.. the PC connects by SMB.. the Mac connects by AFP or SMB..
But you can simply share SMB directly from the Mac.. there is no need to copy files through the TC. Go to system preference, sharing, and turn on SMB for the folder you want to share files to / from on the Mac.
Make sure you have a common username and password also helps.
If you have a TC already can you copy files to it via the windows machine??

Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

Hi there , i use microsoft remote desktop to connect to my work pc - on my 21.5 mac the remote screen is half the size of my screen and i cant get it to be full screen - is this possible or am i just stupid ? many thanks

What setting have you chosen in the view menu? Fit to Screen or Window.
And, in Preferences what have you set for Display?

I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how? Thanks!

I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
If not why option available
Thanks!

What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
Best of luck.

Is this possible to connect Trex 6 To EP7?

Similar Messages

Maybe you are looking for