Is this possible to package flash 8 swf file with AIR

Hi All,
Is this possible to package flash 8 swf file with AIR
packager or load flash 8 swf file in AIR?
Any info on AIR would be greatful.
Thanks,
Shailesh

Yes.
-ted

Similar Messages

Flash swf file with web link only opens my safari home page not the link

I have a flash swf file with a simple web link. when i load the swf file and click the link it opens safari then loads up my homepage. It does not go to the link i clicked. if i choose internet explorer as my browser the swf file works fine.
I am running 2 G4's 10.2.8 & 10.3.9
safari 1.0.3 & 1.3.1
PLEASE HELP

Type '''about:addons'''<enter> in the address bar to open your Add-ons Manager.
Hot key; '''<Control>''(Mac:<Command>)''<Shift> A)'''
In the Add-ons Manager, on the left, select '''Extensions.'''
Disable a few add-ons, then '''Restart Firefox.'''
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
If the problem continues, disable some more (restarting FF). Continue until
the problem is gone. After, you know what group is causing the issue.
Re-enable the last group '''ONE AT A TIME''' (restarting FF) until the problem returns.
Once you think you found the problem, disable that and re-enable all the
others, then restart again. Let us know who the suspect is detective

How to place a Flash swf file with a movie FLV file embedded in DW

     My hair is getting shorter by the hour or maybe missing. I have created a SWF file with Flash 8 that has an embedded FLV file that was created from a MP4 file.   The SWF file works perfectly in FLASH including my Flash nav buttons, and the movie with soundtrack and the buttons for control of volume and start stop. Now I am ready to place it on the web using DW to make the html page. What happens when I test the page on FireFox or IE is the background loads, the buttons load but do not work properly anymore but worse than that: The slide show and the control buttons do not even show up.
     I am also having trouble defining my site locally. I select new site and tell it where every thing is but no luck. All in the same directory, right now I have a image directory but I have not used them on the page as the only image is a jpg and flv file and they are embedded in the swf file.
     I know this is 2 different programs but the Flash files need to be placed in a HTML file to be uploaded, and I have to text them first.
HELP
Randy

from the Premiere Pro Help section about importing SWF files:
" Interactive content and scripted animation are not retained. Animation defined by keyframes in the main, top-level movie is retained."

I can't seem to properly open saved Flash (.swf) files with Shockwave in Firefox.

I have saved .swf flash files on my computer. I can view flash files when part of an internet page, but when I try to open the saved ones on Firefox, it asks me if I want to download them. I have tried to change the settings in the 'options' and 'applications' thing in the 'Tools' part of the menu bar, but while the SWF file(application/x-shockwave-flash) content type is automatically set to use Shockwave in Firefox, I can't find a way to do the same with the SWF file (application/download) content type, which seems to include saved swf files.

Just out of curiosity, try playing the song in a different program . . . maybe Windows Media Player to see if it works. I wonder if it's corrupted....

Launching swf files with Director

I recently obtained Adobe Director 11.5 to create a menu for launching a series of Flash CS4 files. I worked through Dean Utian’s excellent tutorial and found the following script to program a button to launch another Director file. However, I can’t figure out how to get it to launch a swf file. If someone could tell this poor soul how to get Director to launch swf files I would really appreciate it. Thatch
on mouseUp me
play movie "FileName”
end

I don’t know if anyone else will ever need to do this, but just in case I thought I should share the final protocol we developed. This will embed a Flash SWF file into a Director DIR, so it can be published in a form that can be opened directly, without the multiple clicks required to open an swf with Windows Explorer (or the MAC equivalent). It has been tested with Director 11.5 and Flash CS4. I hope my shorthand is clear. Dean Utian, Sean Wilson and James Newton all helped me with this, and support their support was far above and beyond the call of duty.
1.) Resize the Director stage to match the Flash stage
Click the Director stage > Windows > Property Inspector > Stage Size > 550 x 400
(alternatively you can compose the Flash file with a stage that matches Director’s.   640 x 480 is the default)
2.) Embed the SWF into Director
File > Import > Browse to File > Import
Drag cast member from cast window to stage
ctrlK > distribute horizontal across stage > distribute vertical across stage
3.) Type a pause script into the script channel of the score
on exitFrame
go to the frame
end
4.) Open the movie script window (Ctrl + Shift + U) and type in stretcher script (this allows the SWF cast member to resize if the final window is maximized)
on resizeWindow
aw = _player.activeWindow
awRect = aw.rect
aw.drawRect = awRect.offset(-awRect.left, -awRect.top)
end
on zoomWindow
resizeWindow()
end
5.) Set publication settings
File > Publish Settings > Projector > Shockwave
                                                      > Center stage in monitor
                                     > Shockwave > Allow movie scaling
                                     > Html > Template > Shockwave Default
                                                > Stretch Style > Preserve Proportions
                                                > Stretch Position > Horizontal Align
                                                > Stretch Position > Vertical Align
                                                > Dimensions > Percentage of Browser Window
                                                > Width > 100
                                                > Width > 100
                                     > Formats > Windows Projector (Creates an exe for Windows)
                                                      > Macintosh Projector (Creates an app for MACs)
                                                      > HTML (Creates an htm and dcr for Windows or MACs)
6.)Publish the movie
File > Publish
The Windows Projector will create a single exe file that can be opened by double clicking the icon. If your SWF has addChild script, it will launch a second SWF, but the second SWF must be in the same folder as the exe.
The Macintosh Projector will create an app application that can be opened by double clicking the icon. However this application actually consists of a folder with several subfolders and files. You will not see this with the MAC file directory, but you will if you try to E-mail the application. If your SWF has addChild script, it will launch a second SWF, but the second SWF must be in the same folder as the app.
The HTM Projector will create a htm file and a dcr shockwave file. Both must be in the same folder, and the user must double click the htm icon to open the dcr. If your SWF has addChild script it will not launch a second SWF.

Embedding SWF file with SAP Netweaver BI Connection to JSP page

All,
Is it possible to embed a SWF file with SAP Netweaver BI connection that is already published in BW system to a JSP page?
Thanks...

Hallo,
embedding the published web-template via iframe into the jsp should work:
<iframe id="test" src="/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?DASHBOARD=TECHNICAL_NAME_DASHBOARD" width="600" height="800" />
Regards,
Roman

Flash SWF file within Swing JFrame

I was wondering whether its possible to open a Flash swf file within a JFrame
I am looking for a solution similar to the usage of Flash Activex control in .NET
thanks in advance
Vikas

I have read the forum link and other such entries in this forum. I have found the following:
1.) JFlash - a java based flash player. https://jflash.dev.java.net/
Could'nt find the app or the official site
2.) a few projects on sourceforge.org :
java flash bridge where you embed the flash inside an Integrated Browser Component
3.) SWT Flash integration.
I do not find any of these solutions satisfactory.except the SWT/Flash integration which I havent tried.
My question is that isnt there an easier and simpler way to :
Embed Flash into Swing app where actionscript and java can communicate.
I am aware of Remoting and web services. But It is a desktop app I am talking about.
Can anyone suggest anything?
thanks in advance..
from a very frustrated programmer....

Bringing Flash .swf files into Captivate

Greetings,
I use Captivate 2.0. I have been trying to bring a Flash .swf
file into Captivate with very little success. The flash file is
clickable (so that users can review case study information as they
complete Try It simulations). When I bring the Flash .swf file into
Captivate, it works. However, correction (or failure messages)
display every time the user clicks the Flash .swf file. Is there
anything that I can do within Captivate to stop this issue?
Ideally, I would like the Flash .swf to run on top of the Captivate
file so that users can view the case study details without having
to see the failure messages.
Please let me know if you have any questions about this. I
hope it makes sense to you.

Hi Zabcde (or PMW or P?)
Can I just understand (sorry for being thick) your situation.
You're trying to get a flash movie into a captivate session that
the user can work on, see, interact with whilst they're also going
through a Captivate simulation (try it)? Does that mean that slides
are advancing for the simulation whilst you're watching the flash
movie? Or are they watching the Flash movie as a kind of help to
then go and do the Try It session?
If it's the first, then I would suggest calling the Flash swf
and the Captivate swf as seperate instances in flash (using
loadmovienum or something). If it's the second, you should be able
to remove the failure captions from that slide so they don't bug
you.
Apologies if I've got the wrong end of the stick though
Cheers
AJ (jiminiCricket)

URL, email links in Flash swf files shows up in search engine

Hi, can you please help? I post this problem a while ago.
My problem is: I developed a website in Flash 8 on the Mac.
The Flash swf file is displayed via Dreamweaver doc. When I do a
search and, when the site is found in Google, all the links used in
the Flash swf file appears in the snippets below the main title. I
would like to know where I'm going wrong, and how can I prevent
Google from displaying the URL and email details.
Do I need to use a preloaded, or do I need to put the Flash
swf movie file in a table in Dreamwever.
Many thanks,
Blue_Mac

>I don't know how this is happening then. Search engine
spiders don't
>read through compiled files like Flash.
Thanks, this is reassuring. Although it seems to have done
just that.
The following action script is where the details are coming
from. I've used the name 'whatever" as an example. I don't mind the
URLs on view as much as I mind my email address because of security
issues.
on (release) {
//Goto Webpage Behavior
getURL("mailto:[email protected]","_blank");
//End Behavior
I'll check my files again to see if I've miss anything out -
I have done this so many times already.
Regards,
Blue_Mac

Does Keynote Import Flash SWF Files?

Hello,
I do a lot of presentations and I often need to import Flash SWF files and play them inside my presentation. I currently do this on Windows with PowerPoint.
Does Keynote '09 import Flash SWF files?
Thanks!

PeterBreis0807 wrote:
To have Keynote accept and play Flash files go:
+Apple Menu > System Preferences > QuickTime > Advanced > check Enable Flash+
Peter
Alas I don't see that option — having said that I looked at mime types and legacy encoders and nada, but oddly when I went to check the QT version (7.6 by the way) in the "About Quicktime" (accessed via the *System Preferences*) it cycles thru various codecs and "Macromedia Flash Player" is one of them... guess it doesn't access anymore. :o(
Advanced lists only...
Default Synthesizer:
Transport Setup:

Problems loading Adobe Flash SWF file

Our users are experienceing problems loading Adobe Flash SWF
files.
One example of a problem file is:
http://www.adobe.com/enterprise/accessibility/popup_acr8_accessibility.html
User traffic is flowing through a Cisco ASA firewall - these
problems do not seem to occur from home networks or a Netscreen
firewall. The Cisco ASA does NOT have http deep packet inspection
turned on, and any traffic initiated by clients inside the firewall
should be allowed. The symptom is that Internet Explorer will begin
to download the video, but will hang at some point along the way
(for this particular URL it hangs at about 7%). No error messages
are displayed, but the video never displays on the screen either. I
would appreciate hearing from anyone who may have run into this
before, or if someone can explain what is different about this type
of file from regular Adobe Flash, that might help figure out what
the ASA is objecting to. The ASA does not appear to generate any
log messages about denying this type of traffic either.
Thanks in advance for any help you can provide...

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

Is there any app to support Flash swf files on iPad?

Is there any app to support Flash swf files on iPad?
Thank You

Depending on what sites you are trying to access, you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are out of luck if you want to play on-line, but again some of them have app versions in the store.

Accessing movie clip from flash swf file

I have the situation where in flash i created a simple
animated movie clip with few stop() commands on timeline. Movie
clip consists of simple animatio played on roll over and on roll
out which is controlled using actionscript. I loaded movie clip
into flash using [embed] tag but actionscript code is stripped,
there is no stop() action so movie clip loops continously. I guess
that's normal behaviour for embedded flash swf files but i would
like to know is there a way to still achieve that? Can i load swf
some other way with its actionscript and then control movie clip
from flex?

You need the FLA's to open in Flash.
You could download the free trial of a flash decompiler
(www.sothink.com). The free trial won't give you actionscript, but
it will give you all of the art in the swf.

Does anyone know how to load a skin . swf file with video to dreamweaver

I have input the video into flash cs3 and then used the
properties section for adding the video in the source section. I
then put the skin with the first drop down. I saved and just put it
in dreamweaver however does not work.. I was told the skin may not
have be sent automatically. How do we do this. Get the skin . swf
file to go with the video or get them both into dreamweaver. I does
not show up on my site.
Site. www.tesoromp3.com
thank phol

I haven't seen too many questions like this on this forum. Did you also try the photoshop forums?

How can I associat ".swf" files with flashlite 2.1

How can I associate ".swf" files with flashlite 2.1? When I
install flash lite 2.0,it can do ---- click .swf files system can
autoly use flashlite to play.But now I install flashlite 2.1,it
lost this ability return as "unknow files formate".
Now,how can I reassociate ".swf" with flashlite 2.1?
first: I must use flashlite 2.1.
second:I must click .swf file directly.
I know another way to open :open the player and then find the
.swf,and open it. But ,unfortunately,I can not use this way to
open.Now I will be looking for another way.

unfortunately, the 2.1 developer edition you have installed
has not overwritten the original version integrated into the
symbian OS by the manufacturer. This means that the only way to
open the 2.1 files is to open the 2.1 player from your apps menuu,
and click on the swf file. You will only get direct access if the
updated player is in a firmware update for you handset.
Matt
http://www.outside-media.co.uk/blog

Is this possible to package flash 8 swf file with AIR

Similar Messages

Maybe you are looking for