Is this product possible?

I was in discussion with a colleague who says there is a company in China offering online (hot) backups of Oracle 8 and 9 databases that are NOT in archivelog mode!
Anybody go any ideas HOW you could backup a running live database that was not in archivelog mode and do it consistently ? Some type of tracking changed blocks, rowids? I just dont think it is possible, anybody got any good ideas?
(I dont want to get in a discussion about WHY a company would want to backup a live database that wasn't in archivelog mode. Seems a crazy to me, but customer is always right huh...even when they are wrong or stupid I suppose.)

hye man, online backup is not restricted to Archivelog/ Noarchivelog. Youcan take online backup in both the modes. What is meant by online backup??
Then what is a significance offline backups , when both serve the same purpose.Darshan you must know the fundamental, you can not take online backups, if your db is not not running in archive log mode. it has to be placed in archive log mode in order to take backups while the db is up and running.
Online backups does not suppose to be a consistent backups , because you may find diffrent scn's of datafiles headers, oracle can not open the database , until all the changes recorded in redologfiles saves back to datafile.
If your database must be up and running 24 hors a day 7 days a week, then you have no choice but to perform online backups of whole database which is running in ARCHIVELOG mode.
hare krishna
Alok

Similar Messages

Kindly Is it possible to disable DHCP in this product wap4400n ?

Dear Engineers and Technicin,
Good Morning,
Kindly I need support for wap4400n and I did not find it in the user guide and the administration guid.
Is it possible to disable DHCP in this product?
I want the wap4400n Access Point to distribute DHCP from the windows server.
Best regards,
Asad
Refrence:
http://www.cisco.com/en/US/products/ps10052/index.html

I dunno the product, but I might be this ...
http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf
page 25 ...
STEP 1 Click Setup > Basic Setup .
STEP 2 From the IP Settings drop-down menu, select one of the following options:
• Static IP Address—Select this option to assign a static or fixed IP address
to the access point.
• Automatic Configuration—Select this option to automatically configure
the IPv4 network settings of the access point using a DHCP server on your
network. Also select this option to automatically configure the IPv6 network
settings of the access point using an IPv6 RADVD device enabled on your
network.
But i think it is just a brigde, hence your DHCP server is external to the device.
So you have nothing to disable so to speak:
From the Frequently Asked Questions, in the above PDF:
Q. Can the access point act as my DHCP Server?
No. The access point is nothing more than a wireless hub, and as such
cannot be configured to handle DHCP capabilities.

HT2052 is it possible to buy this product in Indian Rupees?

is it possible to buy this product in Indian Rupees?

Hi Gabriel,
I have tried this dev. once.. Just thought of sharing the same. Defined some product attributes in GTS to hold some customized flags in Product master-Additional data tab.
For example: Tried updating country flags in the Product master in GTS.
Country flags are updated based on extension of a Material to a Plant in R/3. i.e, Whenever a Material is extended to a Plant in GTS, we use the Plant country code and update the same in Product master.
And similarly, whenever the Deletion flag is setup, the same can be removed. For this to work automatically, just activated change pointers for MARC-LVORM for /sapsll/matmas_sll.
But in my case, it was a customized development.Not really sure, if this is available in standard.
Thanks
Dhilipan

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us." how does this possible..???

I have a horrible time with my new Iphone-4, No SIM card found issues and while i tried to contact customer care with device serial number getting a messgae of "Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us."
What step should i take next.

Where did you get the phone?
That phone was replaced by Apple or an AASP and was not returned to Apple as it should have been, or it was stolen from Apple or somewhere in the supply chain.
You can not get support from Apple for that phone.
Return it to wherever you got it and get your money back.

Licensing for this product has stopped working - Acrobat 9 Pro / OS 10.7

I am having a problem with Acrobat 9 Pro (9.4.5) following my upgrade to Mac OS 10.7 (MacBook Pro). The error that I've been receiving is "Licensing for this product has stopped working" with a numeric code at the bottom of the page of (0).
As suggested on that screen, I uninstalled and reinstalled Acrobat 9 Pro and spent quite a bit of time loading all of the updates. At the end of it, I still receive the same message and the program will not continue after that message.
This is part of CS4 Master. All other products in the suite are working correctly and without issue. No challenges with other Adobe products for licensing. Acrobat is the only program I have that gives this message and then closes.
I found this page -> http://kb2.adobe.com/cps/512/cpsid_51260.html and started working through the process on that page. When I got to the step of the License Recovery Tool (11.6.1), the launcher program will not launch with the error "You can't open the application LicenseRecoveryLauncher because PowerPC applications are no longer supported." I guess that this program relies on Rosetta and will no longer function.
Can you help? I've already uninstalled and reinstalled Acrobat 9 Pro several times. Some of the steps noted on http://kb2.adobe.com/cps/512/cpsid_51260.html disable the licensing for the other apps in CS4. I really don't want to uninstall and reinstall the entire suite.
I have been on Adobe Customer Service Chat for a few hours. Recommendations have been to just upgrade to Acrobat X or to call it in. Before that, I wanted to check the forum to see if anyone else has hit this issue and if there is another possible fix.
Thanks!

Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark

Licensing for this product has stopped working Error: 5

OK. Totally frustrated here.
Trying to start InDesign (installed with Master Collection CS4) on Powerbook Pro running 10.5.7 and consistently get the error above: "Licensing for this product has stopped working" and with error: 5.
I have attached a dump of the error screen.
I have been through Adobe's knowledge base and followed the steps there. I have:
1. Applied the licensing service update, and I also used the 0 option.
2. I have restarted the computer several times.
3. I have uninstalled and reinstalled the application (the whole Master Collection actually) using the uninstaller, with the remove preferences files option selected.
As far as I am aware I have the latest version because after reinstalling it the updater downloaded 1.1Gb of updates and installed those.
I have also nuked all font caches in case it was related to Apple's font cache bug.
No joy in any event. Still getting the error and no InDesign.
Any suggestions from the gurus here, please???
Alan

Thanks Peter,
As I said, have tried uninstalling and reinstalling but InDesign still doesn't work, all the other CS4 apps seem OK. Looked at the list you provided - much the same as the one I generated except there was one extra page I had not seen before at http://kb2.adobe.com/cps/494/cpsid_49485.html.
Of course the series of steps described in that page are impossible to do because it says to :
1)      Set the computer clock back to May 31, 2009.
2)      Launch the affected product.
3)      Go to Help->Deactivate, select ERASE THIS SERIAL NUMBER.
4)      Quit the application.
5)      ...
The application will not start because the licensing has stopped working. So step 2 is not possible.
Apart from that the only other page that specifically addresses this problem is at http://kb2.adobe.com/cps/405/kb405970.html
In this it says to do the things I said I have already done in my original post. None have worked.
Guess Adobe don't monitor this forum so I suppose I need to go back to Quark to do my work. InDesign appears fatally broken.
Cheers
Alan

Is this scenario possible?

My company is in the process of determing whether OAS InterConnect would be useful to us. We currently have several fixed file formats (different formats) that we get from external sources. This data needs to be put into a "holding area" until several business processes need their own subsets of the data based on a supplied key.
Is this possible with this product?
Can InterConnect work with flat files?
Can I exposed procedures that my application can call to get the necessary data at will?
Thanks for any input.
Brett

You can use the REPLACE_MENU built-in depend on your condition. Search on form's help for this built-in.
-Ammad

Is This Even Possible? eDirectory syncing passwords with external RADIUS servers.

We are currently have a solution that allows us to use a campus RADIUS
server as the authentication mechanism for accessing the Internet. We want
to integrate this so users can authenticate with their campus IDs but gain
access to the Novell server (home directory and printing) using the same
information.
Is this even possible?
So, essentially, we would like the external RADIUS' user/password data to
be synced with the eDirectory data, but have the eDirectory receive updates
from the RADIUS (or LDAP, Kerberos or whatever system is necessary). Or is
an all-Novell solution the only possible way to use RADIUS authentication?
Any input would be greatly appreciated.
-=Bryan

Hi Bryan,
As jim said, you can use idm to do this, but another option for you
might be to use somthing like freeradius and point it back to
edirectory as its authentication source.
Cheers,
Steve
On Thu, 23 Feb 2006 15:50:11 GMT, [email protected] wrote:
>Michael,
>
>Thanks for the info. I really wasn't sure where to post this question. I
>really wasn't sure if I needed to be using Novell's RADIUS server or not to
>do this. Reading the online docs didn't really help me to know which
>solution or solutions to choose.
>
>-=Bryan
>
>> [email protected] wrote:
>>
>> > Is this even possible?
>> >
>> > So, essentially, we would like the external RADIUS' user/password data to
>> > be synced with the eDirectory data, but have the eDirectory receive updates
>> > from the RADIUS (or LDAP, Kerberos or whatever system is necessary). Or is
>> > an all-Novell solution the only possible way to use RADIUS authentication?
>>
>> What you want should be possible with Novell Identity Manager (formerly
>> DirXML) product. This particular forum is for help with the NetWare
>> Radius server, which would not factor into what you are trying to
>> accomplish... you have a non-Novell Radius server that you want to sync
>> eDirectory information with, and that is the realm of identity manager.
>>
>> As to the "hows", you might as in the nsure-identity-manager group here.
>>
>> --
>> Jim
>> NSC SYsop

"Licensing for this product has stopped working" Getting this message since installing Yosemite

"Licensing for this product has stopped working" Getting this message since installing Yosemite

Carlos,
I believe you will have to ask about the possible Dreamweaver login disaster in the Dreamweaver forum,
Dreamweaver support forum
I am afraid it is beyond what you can obtain by working with preferences.
But you may try this specialized forum (where you may be able find the answer from previous threads),
http://forums.adobe.com/community/download_install_setup
or a chat,
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
or Adobe Support (phone),
http://helpx.adobe.com/adobe-connect/adobe-connect-phone-numbers.html

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

How can I fix error code 131:4? Licensing for this product stopped working. I have windows vista home edition and CS4 Design Premium. I downloaded licensing zip file for windows but I can't seem to get it to launch. Look forward to help from anyone

Steve,
I appreciate your answer. While it might work, I'm a bit hesitant to remove the other programs as a possible solution since they are all currently working.
With Acrobat 9 Pro failing with the OS 10.7 upgrade, I'm hoping that there is a less severe solution.
Since the trigger appears to be 10.7 and may have something to do with the discontinued support of Rosetta, I could be spending a few hours working on a reinstall without a change. Yes, it might work. The "might" is the part that makes me hesitate.
Is anyone else out there on OS 10.7 and running Acrobat 9 Pro? Any issues with anyone else?
Thanks Steve. I do appreciate your offering a solution. I may end up trying it if nothing else comes together.
Mark

License for this product has stopped working cs3

I have cs3 web premium and premier elements and I was considering purchasing CS5 but until I can get a clear message AND PERMANENT SOLUTION to why I am now getting for the 5th time the error "license for this product has stopped working." I was working on a important project and now I have to reinstall everything again. This is such an issue that I have read the many many "solutions" Adobe provides for this but I tried them and they did not work. Adobe, what are you doing about this?

Auntybertha
What version of Premiere Elements are you using?
I have Premiere Elements 4, 7, and 8 and have recently run into problems characterized by not being able to open any of the 3 versions that I have installed on the same computer. (I use one at a time.)
Hunt as posted a link
http://kb2.adobe.com/cps/405/kb405970.html
where I would suggest that you especially look at Solution #2 regarding the FLEXnet Licensing Service.
This turned out to be the fix for my Premiere Elements, as well as the Photoshop Elements, for my opening failures for these programs.
Another possible consideration is to open a new computer User Account (with Administrative Priviledges) and run your Premiere Elements using that new User Account. That worked for me recently when the Photoshop Elements 8 Organizer would not open after just about every trick in the book.
Keep in mind that problems may have the same symptoms but different causes. Nonetheless, I would recommend this Solution #2 to your attention, and then, if necessary, a new User Account (with Administrative Priviledges). Premiere Elements is but one application in your computer environment, and many non Premiere Elements factors can enter into the performance of the Premiere Elements in that computer environment.
Please keep us updated on your progress.
ATR

I've got a Photoshop 6 version in German with Serial PWW600R1525365-313 may this product be sold legally on ebay?

Hello,
I would like to know if this product (Photoshop 6) is a legal copy and may be sold on ebay
Product Key
PWW600R15XXXXXXXXX
or is this a faked copy
would be kind if You answer me as soon as possible
thanks in advance
P. Stemmer

Incidentally, never post a serial number again, ever.
If this had been a worthwhile item, by now you would not be able to register it any longer, because the software would have been registered immediately after you made your post.
Very bad move.

Oh wow finally apart of a community im so excited. Hi everyone. I just got abode edge animate and am not so familiar wif this product though i sense a hint of flash buried there somewhere can you guys please assist me in the basics of edge? thanks.

Oh wow finally apart of a community im so excited. Hi everyone. I just got abode edge animate and am not so familiar wif this product though i sense a hint of flash buried there somewhere can you guys please assist me in the basics of edge? thanks.

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

Does this product work? Open discussion?

Anyone care to share any real world success stories of this product?
I'm looking at this product for primarily for sound support and server load
balancing.
How robust is the product?
Would you buy the product again?
Thanks..
d

On Wed, 23 Mar 2005 21:47:25 -0500, flya750 wrote:
Your silemce is speaking volumes.... no one likes this product? no one has
anything good or bad to say? is this product a Citrix alternative????Perhaps your question just isn't interesting?
I've used Tarantella quite some time now, and am very satisfied.
One alternative, however, might be NoMachine NX - running on open source
and multiple OS'es.
From their website:
NoMachine NX is a Terminal Server and remote access solution based on a
comprising set of enterprise class open source technologies. Thanks to the
outstanding X-Window compression technology developed by NoMachine, NX
makes it possible to run any graphical application on any operating system
across any network connection at incredible speed. Besides the native
X-Window protocol, NX is able to translate and tunnel industry standard
protocols like the RDP Protocol, used by Microsoft and Citrix, and the VNC
protocol, used by a number of freely available tools, into X-Window,
giving secure and fast access to the complete set of network computing
facilities available inside a corporate network.
NoMachine NX Server is a cost effective solution that enables any business
to deploy centralized applications to thin clients, mobile and home
workers, over any network connection, with astonishing speed and ease of
use.
NX server runs on Linux and Solaris operating systems, serving
applications installed on the local computer or operating as a gateway to
any Windows Terminal Server and VNC server available on the back-end. NX
clients are available for a wide range of platforms and operating systems,
from Windows to Mac OS/X. All NX clients are free and, more importantly,
NX server software is licensed per-server, not per-connection. This
represents a dramatic cost saving in comparison to competing products. The
power of network computing has never been more affordable.
Jakob Breivik Grimstveit

Adobe Photoshop CS4 Extended, owned for ages, licensing for this product has expired? Was using it two months ago.

Hello,
I have been trying to get Adobe's help for over a month now. I've been on the phone twice to them, opened up three seperate cases and still arrived at no solution. I was bought Photoshop CS4 Extended awhile ago and use it for my studies (I'm an art student). Two months ago my harddrive on my computer failed and I had to have a new laptop. I went to reinstall Photoshop and "Licensing for this product has expired" comes up. I've uninstalled, inreinstalled many times and used Microsoft Fix It Programme for uninstalling to make sure all the files are gone.
Surfing the forums I learned that there should be a folder with back up and Adobe PCD but I don't have that folder at all. The serial number I use is my original serial number that I know works and adobe have even said it's a technical error. What do I do? College starts again in two weeks and I don't have the programme I use for it!

Try the License Repair Tool Adobe - Adobe Licensing Repair Tool
Other suggestions if this doesn't work: Error "Licensing has stopped working" | Windows
Also if you must uninstall, use the Adobe CS Cleaner tool, not the Microsoft one. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Is this product possible?

Similar Messages

Maybe you are looking for