Is this RAM module compatible with my Satellite A100-033?

http://www.maplin.co.uk/module.aspx?ModuleNo=217969&doy=4m12#overview
Hey, would just like to know if this is compatible with my laptop? I think my laptop supports DDR2, but im not sure? Do i have to get anything specific just for laptops?
Thank you

Dont think that the memory module mentioned in your post above will be compatible with the Satellite A100-033.
What you need is something like this:
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=28381&ft=m&st=3
You need a module which supports this spec:
DDR2 533MHz (PC2-4200) 200-PIN SODIMM
Bye

Similar Messages

Which HDD size is compatible with my Satellite A100-771

Hey Guys,
is there a limit of HDD size for my A100-771?
And which type of HDD I need? IDE or SATA?
Thanks a lot.
Eathen.

Hi Eathen,
> And which type of HDD I need? IDE or SATA?
You should check the preinstalled HDD. So you can identify if your notebook has IDE or SATA interface. That takes only few minutes. ;)
On SATA interface there is no capacity limit. That means you can use every HDD that you want. I can recommend a model with 5400rpm. This is a good compromise between performance and noise/power.

I have a mac osx version 10.6.8 no windows and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?

You run Windows in Parallels or Fusion. Then in Windows you install the program.

I have a sony bravia 26M4000, this model are compatible with digital av adapter to use with ipad2?

have a sony bravia 26M4000, this model are compatible with digital av adapter to use with ipad2

Jose A.-
What ports are on the Sony? The digital adapter should work with an HDMI port.
If the Sony does not have an HDMI port, there are also VGA, Composite and Component AV adapters available from Apple.
There is some additional info at <http://support.apple.com/kb/ht4108>.
Fred

TS1538 I have followed the steps to locate usbaapl.inf. but Windows vista says this is not compatible with my device. What do i do now?

Trying to manually install USB driver for Ipad2 in windows vista 32 bit. I have followed the steps to locate usbaapl.inf. but Windows vista says this is not compatible with my device. What do i do now?

If you encounter problems with Google play at downloading Firefox for Android try to download these builds: http://www.mozilla.org/en-US/firefox/channel/#firefox .
Please remember that you should enable for this the settings: allow installing app from other sources that Google Play

Can I install 4GB RAM in my Satellite A100-033?

I have a Satellite A100-033 (PSAANE-03J02GEN). The manual says that it will support only 2GB RAM maximum. Does anyone know if it will in fact support 4GB? I have installed 2x1GB instead of the supplied 2x512MB, and am tempted to install 2x1GB? Will this work, or is there some restriction in the motherboard or BIOS which means that the larger RAM won't be recognised? Can anyone help?

Thanks. I agree that the fact that my laptop's specification says "2GB maximum RAM" is a bad sign, but I have found in the past that specifications aren't always completely accurate, which is why I enquired.
My processor is a 1.6GHz Intel T2060. A check on my laptop (by the program "Belarc Advisor") says that my motherboard is an Intel Capell Valley (NAPA) CRB, and that my BIOS is a Phoenix 6.00 07/12/2007. Is there any way whereby I can find out if this combination will in fact recognise 4GB of RAM?
I know that 4GB only yields a little over 3GB usable RAM, but I would still like to increase the amount of RAM which I have, if this is possible, but obviously I don't want to spend money on 2BG chips which then don't work in my laptop.
Any suggestions gratefully received!

Satellite A100-033: I disabled touchpad and now Fn+F9 doesn't enable it

I have a Toshiba Satellite A100-033 running Vista Home Basic. I mostly use the laptop as a desk top replacement and, as I dislike using the touchpad, I disabled it, and instead I use an external mouse via one of the USB ports.
I am not sure whether I disabled the touchpad by pressing Fn + F9 or by some other means (if it was by some other means I have forgotten what this was). Recently I wished to re-enable the touchpad so that I could use the laptop outside the house. However, I found that pressing Fn & F9 did not re-enable the touchpad and I now can't use the touchpad at all.
If I go into mouse properties (in control panel), this tells me that my synaptics pointing device is enabled. If I go into device manager and look at "mice", I am told that my touchpad is working properly.
All this makes me suspect that the problem is not a hardware fault but that I have altered some setting, with the result that my touchpad is permanently disabled until I change the setting back to its original state.
Help!

Jayjay, Thanks for your suggestions. I don't seem to have a system restore point which goes back far enough, so I don't think that possibility will work.
Regarding the possibility of reinstalling the touchpad driver, I may have to do this, but I am a bit put off by the fact that when I downloaded the touchpad driver from the Toshiba site and had a look at it, I was told that it was older than the one I already have on my laptop.
(My laptop is a year old and the touchpad driver on the Toshiba website was last updated in early 2007.)
I'm a bit reluctant to install a driver which is older than the one which I have already got and which my laptop tells me is working properly.
As I said, I may have to try re-installing the touchpad driver anyway, but I think I will wait a bit first, and see if I get any other suggestions.
Thanks again for your reply.

Re: Satellite A100-033 PSAANE: Realtek Stereo Mix Audio has become "Lost"

Following an encouraging reply to a forum question, I have replaced the original 60G hard drive in my Toshiba Satellite A100-033 PSAANE with a 500G drive.
All is well, except that I no longer have "Stereo Mix Realtek High Definition Audio" in the Recording tab in the Sound option in Control Panel.
It means that I can't record any sound at all, if I try to capture sound, for example using NCH's Debut Video Capture Software.
If I replace the original 60G drive, Realtek Stereo Mix is there and I can record okay. If I plug in my external sound card, I can record sound with that. If (in my new 500G drive) I look at Device Manager in Control Panel, Realtek High Definition Audio is listed under Sound Video & Game Controllers. So it looks like the correct driver is there okay. But somehow it isn't recognised under Sound in Control Panel, and it can't be used by the software which requires it.
It may be a simple problem but it's baffling me. Can anyone help?

Thanks for the suggestions. I used the genuine Toshiba recovery disc. Actually, I have discovered what the problem was. In control panel (home) - hardware and sound - sound - recording, if you right click inside the box, you get the option to show disabled devices and disconnected devices. My Realtek drivers were shown as disabled. Once I ticked to show disabled drivers, my Realtek was shown, and I could then select it as default. It's not something which is at all obvious, but I will try to remember it for next time.

Want VGA drivers for Satellite A100-033 under Vista Home Basic

I have a Satellite A100-033 which runs Windows Vista Home Basic. The main video driver is an Intel 945 chipset. However, I want to install an ordinary VGA driver. This is because I have some software which needs full screen mode. The Intel chipset won't allow this, but the VGA video driver does. Until now I have been able to access the VGA driver on my laptop, via personalise/ displaysettings/ monitor/, which would let me select a VGA driver from a list of device drivers which was presented to me. However, this option has been removed from the list of options. How can I find the VGA driver on my laptop, and/or download another one?

Hi
Im a little bit confused. I dont know exactly what you want to do but the graphic card driver can be updated and install via device manager.
Access simply the device manager, select the graphic card and install or update the graphic driver.
Some graphic drivers cannot be installed automatically. In such case you should install it manually.
That means you should assign the graphic card driver source manually.

Will this memory be compatible with my macbook pro?

Hi, I am in need of a good ram for my MacBook Pro (2011, 2.3 i5)
I've checked amazon and saw this.
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/tech-data/ B002YUF8ZG/ref=de_a_smtd
Will this be compatible with my mac?

RAM has specifications, you need to carefully match the specifications exactly and buy your RAM from a reliable source as to get the highest quality.
Just like most Merceedes only take high grade fuel, a Mac only prefers high quality RAM.
It's rather risky opening a Mac, damage to the screws and other things can occur on some models, so to reduce this possibility (and having to ship bad RAM back) you should choose a highly reliable vendor with tested top tier RAM.
You should also know exactly how to take the right steps to install RAM, wear anti-static protection, disconnect the power and other measures to safely install your RAM correctly the first time!
Many people buy RAM without realizing there is a slot limitation.
If they have 1.5 GB and two slots, they foolishly buy another 512MB RAM module to try to attain 2GB, when they actually need another 1GB module.
So with that I give you a link, I get no compensation, just use their "evaluator" to make sure you get the RIGHT RAM for your make and model of machine. If you don't want to buy from them that's perfectly fine, just get the right specs right the first time.
http://www.crucial.com/

Is this Internal Harddrive compatible with my Macbook Pro 13 inch (Mid-2012) model?

Seagate Momentus 500 GB Laptop Internal Hard Drive (ST500LT012)
http://www.flipkart.com/seagate-momentus-500-gb-laptop-internal-hard-drive-st500 lt012/p/itmdhyu4weuzqtzq
I purchased this internal disk. I need to know if this will be compatible. Only then I would know if its Okay to use or should I exchange it. I need you guys to tell me.. Thanks for your help :-)

An SSD replaces your hard drive. Unfortunately they are kind of small in comparison, so you may need to stick with a hard drive. A SSD uses flash memory like a USB drive, except in place of your hard drive. The speed increase is phenominal. This will replace your drive so you will need to reload OS X which is easy thanks to Internet Recovery.
Kingston makes a 64GB model that is decent, I have one in an older original MacBook and it feels so much snappier. http://www.newegg.com/Product/Product.aspx?Item=N82E16820139949
http://www.newegg.com/Product/Product.aspx?Item=N82E16820226318
They vary in all different capacities and speeds. Not all SSD's are created equal.
Follow the instructions in your MacBooks manual to upgrade the drive.
You will need a 2.5 inch SATAIII SSD if you choose to go that way.
Between the SSD and the RAM upgrade you have a beast of a machine.

Is one of these ram modules compatible?

Hi,
I just wanted to know if one of the modules is compatible with my iBook Tangerine 300MHz?
INFINEON SO-DIMM 512MB PC133 CL3 Sync.- 144 pin
IBM SO-DIMM 512MB PC133 CL3 Sync.- 144 pin
Thanks in advance!
iBook Tangerine 300Mhz, 120GB HD, 128Mb Ram Mac OS X (10.3.9) Macbook (Black), 2.0GHz, 2GB Ram, 80GB HD

Boevieke, Welcome to the discussion area!
There is no way we can tell for sure. The best we could say is... it should work.
PC133 devices should work if those devices will operate at 66 MHz (the bus clock speed of the iBook). Not all PC133 devices will operate at 66 MHz.
In addition, the Mac and OS X are pretty strict on RAM requirements. Therefore something that might work just great on a Windows machine and might appear to meet the requirements... may not work in your iBook.
The best solution is to buy RAM from a Mac knowledgeable vendor which offers a lifetime warranty.

Is PC10600 ram backward compatible with PC8500

I have a mid-2010 Mac 2.8 Quad core. Can I use PC10600 RAM on it? I know that I will not see a speed improvement using the faster PC 10600. The advantage to me is that I find the PC10600 much more readily available in the shops.
Message was edited by: EthanEdward

Specifications:
DIMMs for Mac Pro (Early 2009 \[and Quad core 2010]) must fit these specifications:
• PC3-8500,1066 MHz, DDR3 SDRAM UDIMMs
• Error-correcting code (ECC)
• 72-bit wide, 240-pin ECC modules
• 18 memory ICs maximum per UDIMM
DIMMs for Mac Pro (Mid 2010 \[Hexacore and 8-core Westmere]) must fit these specifications:
• PC3-10600E,1333 MHz, DDR3 SDRAM UDIMMs
• Error-correcting code (ECC)
• 72-bit wide, 240-pin ECC modules
• 36 memory ICs maximum per UDIMM
Note: Memory from older Apple computers is not compatible with your computer.
Those faster memories SHOULD clock down and work in your Mac, but if they do not, you will be stuck with some expensive modules that do not work in your Mac.
• ASK THE VENDOR to guarantee that the modules they sell will work in your Mac.
• ASK THE VENDOR to provide a written Lifetime warranty -- if they ever fail, the vendor will replace them, free.
If they do not know, you need to shop elsewhere. If you are getting anything less, you are being cheated.

I am using the Kurzweil 3000 software and before I can use Read the Web, KESIReader Firefox extension must be installed. This is not compatible with Firefox 5, how can I make your extension to work with my software?

I use the kurzweil 300 software and before I can use Read the Web I must first install the KESIReader.xpi Foxfire extension into Mozilla Foxfire however, the extension is not compatible with Mozilla Foxfire 5 which is the version installed on my computer. What can be done to make this work with Kurzweil 3000 software and the Read the Web tool?
Mozilla Firefox or Microsoft Internet Explorer 7 or 8 Web Browser.
Can you help me with the information I have provided I know the rest of the requirements are meet.

Install Firefox Portable 3.6.22 to your hard drive for that website. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

HT201272 Eversince I updated the Bejeweled Blitz on my 3G iPod, The game kept crashing so I deleted & re-installed the app, now I cannot play this game on my ipod anymore as the new version is made for 4G ISO! Please fix this & make it compatible with all

Ever since I updated the Bejeweled Blitz on my 3G iPod, The game kept crashing so I deleted & re-installed it.
Sadly, I now can't play the game on my iPod anymore because new version is compatible with the 4G & iSo or higher only.
What should I do to get my purchased game back?
Please fix this problem ASAP!
Thank you.

Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Is this RAM module compatible with my Satellite A100-033?

Similar Messages

Maybe you are looking for