Is this RAM the right RAM?

I was just wondering if this RAM would be the right RAM to put in my MacBook.
I don't know too much about this type of stuff.
please look at: http://www.newegg.com/Product/Product.asp?Item=N82E16820227047
Thanks,
Sam
p.s.- This is 2gb of RAM right instead of 1gb?

Officially, the MacBook only supports 2GB of total system RAM. To get there, buy two 1GB SODIMMS.
There are 2GB stocks out there, but I have not heard if theu will work or not. I am also not willing to pay $400 or so to find out - LOL!
It is very easy to install the RAM. Remove the battery and three screws, eject the stock RAM and insert the new stuff. I found that it did require quite an effort to get the RAM seated, so if your thumbs do not hurt when you are done, you likely did not get it all the way in. I am not kidding either.
I rocked the RAM in by applying pressure to one side, then the other until it was seated. I ran Memtest to verify it and allw as well. If you run Memtest, make sure that your MB is plugged in as it will deplete the battery if it is not. I found that out the hard way - LOL!

Similar Messages

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acr

I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??

Have you opened Acrobat and gone to Help>Updates to get an updated install?

Not sure if this is the right place...Recovery or Finding missing files

Hi,
Again, not sure if this is the right place to ask, but its worth a shot.
so i've been transcribing video all day using microsoft office for mac, and was saving the project (i thought) to an external hard drive. at one point the HD came unplugged, and i plugged it back in. no big deal. i continued to save, to type, save, type, etc until finished. so when i finished and saved the project, seemed okay. when i closed word, it kept asking me if i wanted to save changes...i said yes, and it would just ask me again, did this a few times. i assumed it was asking me to save it to a new location, which i didn't think i needed so finally said no.
i then find out that somehow when the HD was unplugged it erased Words ability to save to said location. so my last save was really before the HD was removed, which is odd, because i kept saving and never was prompted the path was interrupted or anything.
so my question is two part...
1. where would i find in the depths of the computer the saved files? if i was saving, they had to have gone somewhere, but i dont know how to find them.
2. also, assuming it wasnt saving, my word prefs say it autosaves every 5 minutes, so those files must exist somewhere also, yet can't find them...
does this make sense, can anyone help me?
thanks
austin

Hi there,
In Finder, select Go menu>Go to Folder, and go to "/volumes".
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists.
See if it may be in one of those with a 1 or 2 added to it.

Hi everyone, not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Hi everyone
Not sure if this is the right forum to ask this question, however any redirect is appreciated. Where can I get the download for the latest old mozilla browser. The one with the dinosaur icon before the browser turned firefox. Thanks, Jen

Phoenix and Firebird were what Firefox was called before Firefox was settled on in 2004, and both used "birds" as the logo. IIRC, the dinosaur was used in the Mozilla Suite.
Here are the earliest versions of the Mozilla Suite. <br />
http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/
I hope this request for a historical purposes of where Mozilla came from, because those old versions aren't safe to use on the internet any longer.

Ms-design-css-conversion="no" Did I add this to the right place?

ms-design-css-conversion="no" Did I add this to the right place?
<link href="https://fonts.googleapis.com/css?family=Open+Sans:300,400,600,700" rel="stylesheet" type="text/css" ms-design-css-conversion="no" />
Do I need to add this, ms-design-css-conversion="no" to all my css link or just
the one above ref google fonts?
Thank you.

Hi,
You are right, if the ms-design-css-conversion set to “no” which means there is no need to do the conversion for the tag.
Example:
<link href="/Documents/Styles/Default.css" type="text/css" rel="stylesheet" ms-design-css-conversion="no" />
More information is here:
http://blog.technovert.com/2013/12/understanding-html-master-pages-in-sharepoint-2013/
Best Regards
Dennis Guo
TechNet Community Support

My right ear headphones won't work on my iphone 4s. I restored the iphone and set-up as new phone, this made the right ear headphone work fine. But as soon as I restored the iphone from back-up it stopped working. Pls help

My right ear headphones won’t work on my iphone 4s. I restored the iphone and set-up as new phone, this made the right ear headphone work fine. But as soon as I restored the iphone from back-up it stopped working. Pls help

Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

MOVED: [Athlon64] Am I posting this on the right board please?

This topic has been moved to AMD SocketA based board.
[Athlon64] Am I posting this on the right board please?

technically, this is a development forum, but most of us here know a bit about the java runtime environments as well.
you should be able to access the java console for the java plug-in in your web browser. if you can find that, see if there are any errors of exceptions listed, and post them here. We may be able to tell you why those errors are occuring, if we see what the messages are.
if you can't find the java console, tell us what browser you are using, and we may be able to help you find the console.
- Adam
Message was edited by:
guitar_man_F

Hi, I bought an imac 27" quad-core i5 with 1067Mhz DDR3 RAM in it. I would like to know if this is the right type of speed for my imac as I found out that these imacs come standard with 1333Mhz DDR3's? It is crashing a lot!

Hi all. I bought an imac 27", 3.1Ghz quad-core i5 Mid 2011 last year in 2012. The machine has been crashing ever so frequently. I upgraded the RAM from the 4Gb it came with to 12Gb. It still crashes! I recently noticed that my imac came with 1067Mhz DDR3 memory chips ( slower speed) than the Apple mac recommended 1333Mhz DDR3 memory chips.
The shop I bought it from ( Incredible Connection, Woodmead, South Africa) are refusing to own up as they are saying the 1333Mhz chips have to be ordered in advance. Surely they are supposed to sell the product with the right kind of Ram in it? Not for me to find out? Now I have to fork out more money to make my imac factory standard? Maybe I am wrong, But do these Mid 2011's run well on 1067Mhz memory chips if I upgrade to 32Gb? Is it possible people are swapping 1333Mhz chips from new machines with 1067Mhz chips which are way too cheaper? My system version( SMC Number) is 1.72f5
Baffled!

Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck!

I am getting this error :The right function requires 2 argument(s).

declare
@startdate datetime,
@enddate datetime
SET @STARTDATE ='01-MAR-2014'
SET @enddate = '01-MAR-2014'
Set @StartDate = Convert(datetime, Convert(char(10), @StartDate, 120) + ' 00:00:00', 120)
set @enddate =convert(datetime,Convert(char(10),@enddate, 120) + ' 23:59:59',120)
SELECT
[row_date]
,[logid]
,CONVERT(VARCHAR(6), (ISNULL(SUM([acwouttime] + [auxouttime] + [holdtime]), 0))/3600) +
':' + RIGHT('0' + CONVERT(varchar(2),(ISNULL(SUM([acwouttime] + [auxouttime] + [holdtime]), 0)) % 3600) / 60), 2)
+ ':' + RIGHT('0' + CONVERT(varchar(2), (ISNULL(SUM([acwouttime] + [auxouttime] + [holdtime]), 0)) % 60), 2)AS HoldTime
FROM [CMSData].[dbo].[hagent2]
WHERE ([logid] IN (1382, 1493,1382,1493,1444,1466,1301,1074,1655,
1749,1685,1686,1684,1617,1681,1792,1595,1597,1687,1622))
AND (row_date BETWEEN @StartDate AND @EndDate)
GROUP BY
[row_date]
,[logid]
hi friends when I am executing this query I am getting this error please help me I will grateful to you .
ERROR: The right function requires 2 argument(s).

you may be better off making date filter as below
declare
@startdate datetime,
@enddate datetime
SET @STARTDATE ='01-MAR-2014'
SET @enddate = '02-MAR-2014'
AND (row_date >= @StartDate AND row_date <@EndDate)
see
http://visakhm.blogspot.in/2012/12/different-ways-to-implement-date-range.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Changing date information (not sure if this is the right version)

Hi guys,
I'm not sure which version of iPhoto I'm using. It came by default with my MacBook Pro a year and a half ago, so perhaps someone whose switched on to those things will know which version that is.
The problem is that I recently added a group of pictures to iPhoto that have the wrong date on them. Apparently the camera was set to January 2007. This now means that these photos are in the wrong order in the library. How do I re organise the files so that they appear in the right order (i.e. at the bottom)? I've already tried highlighting all of the pictures, cliking 'batch change', and changing the date, but that only changes that date that they were added, which doesn't seem to change the order. Is there some sort of re organise button I need or something similar? Is there a way to change the date that the pictures were created? This is really only a small thing, but it is annoying all the same. All help is greatly appreciated.

iPhoto Menu -> About iPhoto
will tell you which version you have. It's important because the solutions vary according to the version.
Regards
TD

AME - not sure if this is the right way to proceed

I'm not sure where to post this or if AME is even the right place to start. However, if you point me in the right direction, I'll take your advice and move right along.
I am one step shy of a novice. Please understand and respond accordingly.
I have been given a task to complete a video for a conference. I am receiving video footage from all over the place and in all kinds of formats. I am using Adobe Premier Master Suite CS4 Windows 7 64 bit. My pc is more than suitable - exceeding all Adobe standards and built by an Adobe recommended vendor. I have no problems with the pc when working with DV tape. I use it all the time creating all types of projects.
The project is SD 720 x 486. The output will be to DVD. NTSC, not PAL.
I have recieved so far....
.mod 1280 x 720
.mod 720 x 480
.mpg 640 x 480
.avi 720 x 576
.avi 1920 x 1080
.avi 720 x 480
I've even received Hi-8 tape!
Most everything else is DV tape and I'm having absolutely no problem capturing, editing, etc etc Everything here works just fine. Audio - great. Video - great. Yes I'm importing the files via firewire. Wish everything else were so simple!
So, is there a reference that I can use to find out how to "convert?" all these things to a standard SD 720 x 486 .avi file that Adobe will love and cherish?
Thanks for reading all of this. Hope someone can help me.

Thanks
I didn't think so but I didn't want to mess up the Touch.

How to unstack (if this is the right term) virtual copies in LR4?

i looked at this article http://forums.adobe.com/message/2881825#2881825 but it did not help. click on the 1/2 icon only makes it become "2" and doesnt sit the virtual copy next to each other.
is "stacking" the right term im using or is there something im overlooking. last week lightroom was fine, this week its acting up without me touching anything.
basically i would like to see my virtual copies side by side. thanks!

Aloha Y'all,
Don't know if you figrued this out, but I had a friend with the same issue and you inspired me to explore it a little more... The easy fix we found was being in the Library Module and in the Grid View... Then click "None" in the Library Filter bar at the top... It seems that somehow in the "attribute" area of the Library Filter bar at the far right we somehow had clicked on the first little icon to the right of the word "kind" that is to only view the "Master files"... We Tried it again to double-check and yep... With that icon clicked you cannot stack and unstack virtual copies... because you have told Lightroom to only show the Master Files... Duh. :-/
Thanks for giving me the oompf to figure that out... Hope is helps, if any of you didn't know that.
Message was edited by: SantaFeRick

Not sure if this is the right thread...

...but I need some help with Star Office. (If there is a Star Office support newsgroup somewhere please let me know and I will post there). But in the mean time I have a question:
The company that I work for has decided to support Star Office (yay!). And it is my task to redevelop the relevant parts of their existing codebase. Currently we have a DLL (developed in VB) that is run via an Excel macro (the macro is really just a collection of stubs that allows access the the DLL).
I have developed a Java application (which does the same sort of things as the existing engine), and I have compiled it into a JAR file.
I now want to be able to access classes in that JAR file via StarBasic. Is this possible? Am I on the right track? I have been reading about UNO. Do I have to wrap my classes up in UNO interfaces? And if so, are there any good examples/tutorials?
As you can see I am a little lost at the moment. So any help that anyone could provide would be GREATLY appreaciated. :)
Thanks! :)
Ben

http://www.openoffice.org/ is the open source
developer that twins Star Office; they hava a number
of mailing lists that are active.Yep, I've had a look there. I even downloaded Open Office to see if the examples would give me any insight.. though no luck :(
I'll just keep searching aorund I guess...
But this seems like something that should be fairly easy to accomplish. Perhaps I am missing something simple?

Drawing in NetBeans (Hope this is the right forum)

Hello.
I got a litle question.
can I draw pictures on the the frame with the GUI builder? (I mean if there is a button "draw picutre" or maybe something through the properties on the frame/panel or something like that)
or I need to override by myself its paintComponent() method in the source tab?(or I need to write the paintComponent() code manually)
I am using netBeans 6.0.1 if its matter..
If its not the right forum for my problem please tell me
Thanks in advance , Gonen
Edited by: Gonen on Mar 16, 2008 8:35 AM

Gonen wrote:
but I got already a picture that I want to draw (JPG file)I'm sorry, my bad but I misunderstood you. So you want your application to show a picture, is that it? If so, the easiest way I know of is to create an ImageIcon with your picture, place this imageicon in a JLabel, and show the JLabel. If you need to show a picture in the background, then you'll probably need to override the paintComponent of a JPanel, draw the image there using a graphics method such as drawImage(...). You can learn a lot about how to do this here:
http://java.sun.com/docs/books/tutorial/uiswing/painting/index.html
here:
http://java.sun.com/products/jfc/tsc/articles/painting/
and here:
http://java.sun.com/docs/books/tutorial/2d/images/index.html
http://java.sun.com/docs/books/tutorial/2d/index.html
Here's a simple example of using an ImageIcon:
        try
            String imageFile1 = "disc/d1/f/image1.jpg";
            icon1 = new ImageIcon(ImageIO.read(new File(imageFile1)));
            JPanel jp1 = new JPanel();
            jp1.add(new JLabel(icon1));
            //.... more code here
        catch (IOException e)
            e.printStackTrace();
        }Good luck
Edited by: Encephalopathic on Mar 17, 2008 9:56 AM

ATI HD3870 - have I put this in the right place?

I've just upgraded from an XT1900 (which was slowly frying itself and causing all kinds of graphics issues) to a nice, new HD3870. All's gone well so far with installation and setup. Only one thing is worrying me a little: the 1900 occupied Slot 1, and I've done a direct swap with the 3870. But the 3870 is shorter and its installation has left me with a gap in the back of the machine which was previously covered by the grille on the 1900. Shouldn't I cover this gap up? It strikes me as an obvious dust conduit. If so, with what? Or should I move the 3870 to another slot?

High power cards have to go in slots 1 or 2, so your card is in the right place. Any computer store should have a blank PCI cover for the empty space between slots 1 and 2 when you use a narrow card in slot 1. The space should have a metal cover to prevent electrical noise escaping, not just dust.

Hi, i guess this is the right place to ask? Not sure where else to go...

I have audio visualization on my pc, so when i play songs from MP3, random patterns etc are generated, this im sure you know.
well, is there a way to turn my MP3 track, into a VIDEO so i can attach the Visualization to the song - and burn to CD, and put in my DVD player...?
Thanks

Definitely not the right place to ask. This has absolutely nothing to do with Java.
But what you need is screen capture software (Fraps for example...go to download.com or google for other screen capture software). You'll need to use the capture software to create your video. Then use some kind of authoring tool to create your DVD, with the sound and video files put together.
If you came to a Java forum for help with this, the solution might be a bit over your head...

Is this RAM the right RAM?

Similar Messages

Maybe you are looking for