Is this really a Shieldzone the 'Invisible Shield'?

Hi
I ordered a Shieldzone skin for my nano, and as I'm in the uk I couldn't order from the USA site, so found a company through Amazon to buy it from. It arrived today, but on the packaging, rather than a Sheildzone logo, there's a CAPDASE logo. Overall the product looks like a cheap version. Have I been 'done' here? Not knowing what the proper product should look like, i just wanted to get some advice before 'kicking-off' at the company thats sent it.
Any help greatly received.
Cheers
Wayne

Shieldzone is the company that makes the Invisible shield.
http://www.shieldzone.com/
Looks like Capdase (http://www.capdase.com/) is a completely different company.
If you go here -> http://www.capdase.com/index.php?page=product&type=8&cat=5&brand=5
Quite a few language/speeling errors also.
Looks like a Japanese/Chinese company with no one really reviewing the language conversion on the website.

Similar Messages

  • Something went wrong with the invisible shield application

    After putting on the invisible shield, I was really happy because it turned out great. I waited about two to three hours then started using it.
    To my horror, I think my nano might have shorted out because when I press play the song changes. sometimes the play/pause button doesnt even do anything when i press on it...when i touch the volume control, it increases and decreases erratically regardless of what im trying to do...sometimes it even seems like my nano has a mind of its own because when i simply move the nano, without touching the controls, the song changes or the volume changes.
    this erratic behavior occurs sporadically. sometimes my nano works fine. then right when i think all is well, my nano becomes possessed. is it possible that my nano has shorted out? maybe i should let it dry?

    hey carl,
    The process of applying the shield requires that I wet the film with soap and water. What do you suggest I do? My mistake was that I did not put on the hold button when I was applying the wet film and thus my ipod turned on while I was putting on the shield. i realize now that my nano should not have turned on for 24 hours. Should I just wait and see if the funky behavior goes away? or should i visit the nearest apple store?

  • The Invisible Shield

    I just got my Invisible Shield. I hate it. Application was ****, and to lift up and re-apply leaves lines / fingerprints. I'm sending it back, and they will send me a new one free of charge. If it doesn't look well, it's going back. When / if my iPod gets too scratched at any time, I will use Brasso to remove scratches.
    This is a good concept, but I don't feel that it's application is very easy, nor is the result appearence of the product.

    don't go for what looks to be the best deal (the cheapest). Go for the IS, it's fully worth every dollar. Best investment for my iPod this far. Once applied & dried it really fits like a glove (even better).
    Before I had the IS applied I was really worried about scratching the iPod (even by just looking at it) and was seriously orienting on what case to buy. Now I still use the original case shipped with the iPod but in fact I don't really bother: The IS really protects it that good that a case really is not needed anymore!
    Take our advise at heart and go for the Invisible Shield.
    Jan.
    iPod 5G - 60GB   Windows XP  

  • Replacing the nano battery with the invisible shield... How?

    Does anyone know how the invisible shield will work when the battery needs to be replaced? I am looking for a permanent solution. While I know that I will be able to peel the Invisible Shield off for the battery replacement, the shield will become stretched and distorted. At this point I will not have a shield, and don't have to want to buy another one. The only solution I think would be possible is if there was a way to slice the shield with a razor (around the seam). Any ideas. Perhaps I shouldn't buy the Invisible shield, it might just be a short term solution.
    Anyone?

    Actually, I think the more prudent question is whether or not the nano will even be accepted for battery replacement by Apple, or anyone else with a cover like that attached to it.
    They could even charge extra money to deal with it, I can see either situation as being realistic.
    If that does turn out to be the situation, then it would come down to a matter of costs as far as what you would need to do.
    That being said, I personally think it is way too early to even worry about things like that since it is years off at a minimum, and it could very possibly never need to be done.

  • Should I get "The Invisible Shield for PowerBook"?

    Hi, has anyone bought the Invisible shield for PowerBooks? I wanted to get one to help protect my PowerBook palm rest area and clicker from pitting/scratches (my other PowerBook started to pit after about a year). Is it as invisible on the PowerBook as it is on an iPod? Would you'll recommend "The Invisible Shield" for PowerBooks? Thanks in advance for any help!

    I use the Marware Protection Pack from http://www.marware.com
    It has an adhesive wrist area protector that looks really slick and is comfortable to use. It also comes with a screen cloth and a keyboard cover to protect the screen from the keys. All for 20.00.
    PowerBook G4 15; 1.67 GHz; 512MB; 100GB; SuperDrive   Mac OS X (10.4.3)  

  • Do Apple Stores stock the Invisible Shield?

    Im based in the uk, but a friend is heading over to San Fransico next week and im wondering if the apple stores stock the invisible shield or will i have to order from the invisible shield website?
    cheers guys

    Hi there,
    AFAIK the only way to get them is via their website.
    I'm from Germany and have been looking around the last days to find a German or at least European dealer, thinking it might arrive faster. Haven't had any luck though :/
    So, I ordered mine 2 days ago via the website. I'm pretty curious how long it will take to arrive here.
    Cheers from Germany,
    Mara

  • When I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.

    when I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.

    Hello yung ron,
    It may be that your iPhone's set to sync automatically, which can potentially remove any music that's been added to the device. It may help to set the device to 'manual mode,' so that you have complete and total control over what content is on the device.
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Cheers,
    Allen

  • Did anyone have success applying the invisible shield to their ipad?

    Did anyone have success applying the Invisible Shield to their Ipad?

    Yes.  Make sure any iPad Cover that you have for it is removed first.  Then, start at the bottom where the On/Off button is.  Peel off only a small section of the bottom of the invisible layer and attached the small exposed sticky side to the bottom of the iPad.
    Line it up as best as you can.  Placing the edge of the iPad against a flat surface like a wall or backsplash on a kitchen counter can help you to keep the invisible sheet "square" with the iPad surface.
    Was that a confusing answer?

  • Hard Shell or Rubber Case on the top of the invisible shield?

    Hey Guys,
    I have installed the invisible shield on my iPhone 3G S and let it to dry for around 3 days now .. I just wanted to install shell on the top of it just in case to protect it from any drop damages and so on. The question is : Is it safe to install a hard shell cover on the top of the invisible shield ? or is the hard shell cover is going to harm the invisible shield in the long term?
    Thanks in advance,
    Rashid

    Our MBP is an A1278  (uni-body) bought in NZ 28 June 2011. S/N: CO2FW8NVDH2G
    It looks more like a bit of dark grey foam rubber with a smooth coating . Was attached to the retaining bar and/or plastic pull tab on top of the display data cable connector and about the same length across and tapering towards the cable that goes to the display. I may be thick but who, what and where are OWC?
    What problems could an insularor cause? I had another reply from someone via ifixit who said he liked the idea of a bit of neoprene replacing the lost pad! What to do?
    Thanks for your time replying
    John

  • Water under the screen while applying the invisible shield

    I was applying the full body invisible shield and since it was difficult to apply the back(as suggested by every one) I did it one night switched the phone off all the time and the next morning it was fine and i loved it as it was looking good and on top of it it was protecting the back side of the phone.
    The next night i applied the front side(supposed to be the easy side and child's play) and to my annoyance when I switched the phone back on in the morning there was water(? solution for applying the screen protector)under the screen. The screen looks awful
    The ringer volume plays up now and switching on the phone is a bit cumbersome as it plays (sometimes in one go sometimes I have to use the home button and the power button together).
    My phone is new ,bought on the 2nd of April 2010 and what do I do now? will apple warranty cover this?

    Apple will not cover any moisture damage to the iPhone.
    You can see if the moisture sensors are tripped or not. If they are then you are out of luck on warranty, no questions asked. Here is Apple's support document of inspecting the moisture sensors...
    http://support.apple.com/kb/HT3302
    If the sensors are not tripped, Apple would probably not cover the iPhone under warranty if there is visible signs of water (or liquid) behind the screen. If the button problems are not that bad, then you could switch the iPhone off and place in a bag of dry rice. It might help draw out some of liquid from the screen.
    Personally I would stay away from anything that requires liquid to install. If done wrong it can kill the phone, which may be the case here. You can still make an appointment at an Apple store to look into an out of warranty replacement, which would get you a refurbished iPhone for a flat rate. The other option would be to check to see if there are any local third party repair centers. They may be cheaper than the out of warranty replacement, but at the same time could be more.

  • Does The Invisible Shield Marr Out Existing Scratches On iPod?

    When you put an invisible shield on your ipod, do you no longer notice the scratches that exist on your ipod?

    i'm also wondering if the crystal shield by istyle does the same thing.

  • The Invisible Shield for Zen Vison

    http://www.shieldzone.com/form/index.html?preadd=action&key=CREZENVISM
    Just wondering if anyone has this on there Vison: M at all? I did order it for my Zen and my PPC-6700, but would be nice to hear some user reviews on it. Here is a test on it with a video iPod
    http://www.untenohana.com/archi'ves/...d_scratch_test/
    vis

    I have it. It definitely is strong and will prevent scratches.
    Despite what the directions say, you should get the application right the first time. Once you start pulling it up it really starts looking bad. The overall look is like you vacuum seals your zen in plastic.

  • I'd like to buy the "invisible shield" for my video iPod but ....

    .... since I live in the Netherlands I have to pay an extra shipping & handling fee of almost $70,= !!! Which makes the total price almost 100 bucks for two pieces of plastic!
    My question: Does anybody happen to know whether there is a local reseller in the netherlands for this protecting shield?
    Thx,
    Jan.

    Thanks all for your help: I think the trick was "deselecting" the butten in front of the UPS shipping... I clicked on it once (it doesn't look like a clickable option) and noticed that "Shipping & handling" was set at $0.
    I placed my order for $24. Now I just have to wait and hope I won't run into problems applying this shield to my iPod.
    BTW: I just managed to succesfully convert one of my U2 dvd's to the correct iPod format: It looks/sounds great. It brought a big smile on my face, love this piece of art...
    Jan.

  • The invisible shield question

    I got mine in the mail today, but there are no instructions on how to put it on. Can anyone help me on this. I went to the website that it gave me, but it said page not available. If anyone has the instructions that would be great thanks.

    I finished my Nano last night, and will do the iPod 5G this evening. The Nano came out looking fine, but I may have a problem with the click wheel. I have not turned it on yet, but the click wheel seems only to click on one side. The other 3 sides and the center button no longer make a distinct click. I am hoping that this will loosen up with use, and that when I turn it on, it will still function correctly. Has anyone else had a similar problem?
    Thanks -

  • Where do you get the invisible shield for 5G ipod?

    where do you get it? do they even make it for the black 5G 60GB ipod? also any idea if there's gonna be the agent 18 clickshield for said ipod? thanks

    I've tried several different screen protectors for ipod, psp, and cell phone, and these are absolutely the best in my opinion. they offer great protection with NO degradation to the video/graphics when viewed with it on...
    Martin Fields Overlays:
    http://www.overlayplus.com/US/disproduct.asp?model=newipod&modeln=iPod%205G%20Video

Maybe you are looking for

  • No more key photos in "Photos" view?

    After upgrading, I can no longer see key photos in "Photos" view. Is this a setting that I can change, or did iPhoto '11 drop this feature?

  • Solution for Network Printers who've lost Appletalk?

    Figured out what appears, so far, to be a solution to those having issues with older network printers and the loss of Appletalk in SL. After trying everything recommended to make my HP 4050n work under SL, and just about to give up and start shopping

  • File Name in Client_Get_File_name

    Hello I'm trying to set the file name in the client_get_file_name package to a default name. But it doesn't work - what I'm doing wrong? I wrote following in a button-trigger: file_name := Client_Get_File_Name(null,'test_'||TO_CHAR(Sysdate,'DD.MM.YY'

  • How to store multiple values associated to one key

    hello all In my program I need to store "multiple values associated to one key". for example : key would be ="T"                          Values are    = 2,4,5,1,2Plz tell me which data structure I can use for this purpose. I have tried Hashtable for

  • How to find the original RAW file # from a Lightroom exported JPG?

    Hello, this is in regards to a Lightroom 3.5 exported JPG. This was a year ago when I had been told it was best to export files with simple renumbering of them from 1 to x... instead of retaining the original RAW 4-digit file name. I've currently los