Is this safe for the display

hi all
i wanna purchase this
but im concerned it will give harm to the display by putting forth too much pressure on it when closed (if its thick)
http://www.radtech.us/Products/NotebookScreensavRz.aspx

It's fine, don't worry about it. I have seen people put a screen protector on top and a keyboard protector on the bottom. It's fine and it's not going to do any damage to the computer.

Similar Messages

Is this safe for the macbook?

to use on battery till about 50 percent and then hook it up to the charger? sorry for the noob question?

Just to clarify as it's not clear in your original question. There is often a misconception that you need to fully discharge the battery before recharging it again. While this is true for nickel cadmium and nickel metal hydride batteries, this is not the case for lithium ion/polymer batteries.
I'm just mentioning this in case you were asking because you thought you should be fully discharging the battery before recharging it. With the battery in your MacBook, the "more" you use it on battery, the more quickly you will shorten the life of your battery. Fully discharging your battery on a regular basis can drastically shorten its life.

Is Satellite A660-11m display safe for the eyes?

If any body sure about if the monitor of Satellite A660-11m safe for the eye because i heard that eye become red from long time stay on the monitor
If any body know about the safety of the monitor please reply me & thanks

> If any body sure about if the monitor of Satellite A660-11m safe for the eye because i heard that eye become red from long time stay on the monitor
:) listen dude
Every display (TV, LCD, TFT, notebooks display, external display, etc.) might affect your eyes if you would not follow the rules recommended by manufacturers and eye specialist ;)
You should take a break between the computer work sessions and gaming.
You should keep distance to the monitor and be sure that your environment is bright enough
Read the user manual and ask your eye specialist how to avoid red eyes ;)

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

What is the default for the "Display PDF in Browser" setting?

What is the default for the "Display PDF in Browser" setting in Adobe Reader 9 and X?
Also, are any statistics available on what proportion of users have this setting set to on?

For all three the default is "checked".
Be well...

The factory profile for the display could not be found.

Whenever I try to color calibrate my Mid 2010 iMac I get the error message "The factory profile for the display could not be found". When you look at the profile settings for the display a color sync profile is set, but the setting for the factory profile is blank. I know where the color sync profiles are stored but it seems to me that the display has lost the setting to the factory profile. Can anyone tell me what the default factory profile setting should be? and how do you restore the setting? (note: I seem to have all the ICC files, it's the default factory setting itself that is missing)

There seems to be a lot of posts about this issue dotted around the net with no-one able to come up with a solution. So I found a solution myself! =P
1) Download a copy of Plistedit Pro. It's shareware, so donate!
2) Edit /Library/Preferences/.GlobalPreferences.plist (you will need to create a copy of the file, edit the copy and then copy back)
Using the plist editor find the coloursync entry for your device and simply edit the factory default entry to point to a valid colorsync profile file (.icc).
I can now colour calibrate my iMac again. Phew!!!

Desktop is too big for the display

Some how this morning while on my Mac a display setting or something was changed. If your on the desktop, with all windows closed, the background, icons, dock.....everything is too big for the display. If you move the cursor all the way to left it will 'slide' the desktop in that direction. Move it all the way to the right edge of the display and it 'slides' the desktop to the right until you reach the edge. Also the same for the up or down directions.
At first I thought it had something to do with the multi-touch track pad, but I don't think so. I have checked all the display settings I can think of and have tried re-sizing the desktop to all other settings in an attempt to fix the problem. Additionally I have restarted/shutdown the computer totally to see if it would fix the issue. No success. Please help.
Thx,
Audioboy

I had the same problem, but the zoom was already off. So I went under "options" and unchecked "use scroll wheel with modifier keys to zoom," and that took care of it.
Thought that might help some others who find this thread.

Can Not Calibrate the display. The factory profile for the display...

I have an apple cinema display 20" and a mac powerbook g4 (1.25 GHx PowerPC g4, 1.25 GB DDR SDRAM) with os 10.4.9. All of my software is up to is date.
I used to be able to calibrate my colorsync profiles. My computer's hard drive recently failed and I had it replaced and the system re-installed (If any of you live in NYC, I took it to tek Serve, and they know what they are doing).
Now when I try to calinbrate my monitor I get the error "Can Not Calibrate the display. The factory profile for the display could not be found." Like I said I have updated to 10.4.9 but this hasnt solved my problem. I have restarted my computer, and this has also not solved my problem.
Any help!?! Please! This is important to me as I do color work for print and I need to see colors accurately When I use my computer.

I fixed it already. There was indeed a problem in the preferences. In my case I removed the whole preferences folrder to the desktop (which forces the computer to rebuild it fresh) and it worked fine! Then one at a time 'as it was needed, I put back the preferences for other applications (mail, itunes etc). Turns out no preferences was better than whatever corrupted preference was in there causing the problem. You know what I mean. If no preferences are there the applications start over building it new automatically. So it was like a preferences restart. sorta.
Unfortunately, since I dont have applecare I had to spend 50 bucks on the phone with apple to figure this out. It's amazing how long it took them to actually pinpoint the problem. Hopefully if anyone gets that error in the future they'll find this post on google and save some bucks.

Best way to clean microfiber cloth used for the display?

What is the best way to clean microfiber clothes used for the display?
Thanks

Hand washing works well, but can be tedious.
If you decide to machine wash, make sure of a few things:
- Use warm water
- Do not wash with towels or undergarments. The microfiber cloth will pick up every bit of lint from them.
- Wash it with similar color items.
- Use regular soap, but don't use bleach or fabric softener. The bleach can damage the cloth (and the Apple cloth is black anyway, do you really want a spotted cloth?) and the fabric softener will reduce the effectiveness of the cloth.
- Hang it up to dry or dry it on the lowest setting of your dryer. I am not certain about the Apple cleaning clothes, but other microfiber clothes have been known to actually melt in the dryer if it gets too hot.
To hand wash:
- Put the cloth in a bowl with a tight fitting lid, add a little soap. Either dish soap or laundry soap will work, you don't need much.
- Close the lid tight & then shake the bowl hard for a few minutes. Find a 3 year old, they'll love to help do this.
- Remove the cloth & rinse it well, making sure the water runs clear.
- Air dry flat or throw it in the dryer at a low setting.

Satellite 1000-Z2: I need a driver for the display and the LAN

Hi
I have reformatted my laptop S1000-Z2, and I am having real trouble trying to find any information on this model !
Basically I need a driver for the display, and the LAN ?
Best Regards,
Austin.

What OS do you use???
If you use the XP you will not find the LAN driver on the recommended driver site!
I can not give you any advices where to find such driver because I dont know what LAN card is installed in your oldie.
But why you dont check this yourself? Try to find out what LAN card you use and googel a little bit for compatible applications ;)

Will a hardshell case provide some protection for the display for my 15" Retina MBP?

I am concerned about how fragile the display is. I purchased my MBP w/retina display in August, and about a month ago I got a line through the display. It had never been dropped or hit, whatever - and when I brought it in, they noticed a tiny crack in the display. They said this can occur by simpling applying to much pressure with your thumb and forefinger! Eeks!
Needless to say, I do not want this to happen again. I am obviously going to use more care when handling, but was wondering if a hardcase would help provide some extra protection for the display - or if the rigidity would actually hurt the display upon application. I'm looking at the Speck smartshell now.
Thanks!
Kensey

I am concerned about how fragile the display is. I purchased my MBP w/retina display in August, and about a month ago I got a line through the display. It had never been dropped or hit, whatever - and when I brought it in, they noticed a tiny crack in the display. They said this can occur by simpling applying to much pressure with your thumb and forefinger! Eeks!
Needless to say, I do not want this to happen again. I am obviously going to use more care when handling, but was wondering if a hardcase would help provide some extra protection for the display - or if the rigidity would actually hurt the display upon application. I'm looking at the Speck smartshell now.
Thanks!
Kensey

How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and onl

How come although iPads are getting more powerful, the iOS apps from apple are so mediocre and just not that great? We spend all this money for the latest ipad and all we get is these $5 video and music apps from apple. Why create the iOS platform and only offer so so apps like IMovie and GarageBand ? While other developers are offering much better apps like pinnacle studio for video, Cubasis and Auria for music production, apple has not showed much growth in terms of innovation. While there's nothing wrong with making an app like GarageBand where "anyone " can make a song, how about something for real musicians or an app not so basic as it get for video editing? After spending 0ver $700 on an ipad I'd be willing to spend more than $5 for a better video or audio app.

First, try a system reset although I can't give you any confidence. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

How to tune this query for the improve performance ?

Hi All,
How to tune this query for the improve performance ?
select a.claim_number,a.pay_cd,a.claim_occurrence_number,
case
when sum(case
when a.payment_status_cd ='0'
then a.payment_est_amt
else 0
end
)=0
then 0
else (sum(case
when a.payment_status_cd='0'and a.payment_est_amt > 0
then a.payment_est_amt
else 0
end)
- sum(case
when a.payment_status_cd<>'0'
then a.payment_amt
else 0
end))
end as estimate
from ins_claim_payment a
where a.as_of_date between '31-jan-03' and '30-aug-06'
and ( a.data_source = '25' or (a.data_source between '27' and '29'))
and substr(a.pay_cd,1,1) IN ('2','3','4','8','9')
group by a.claim_number, a.pay_cd, a.claim_occurrence_number
Thank you,
Mcka

Mcka
As well as EXPLAIN PLAN, let us know what proportion of rows are visited by this query. It may be that it is not using a full table scan when it should (or vice versa).
And of course we'd need to know what indexes are available, and how selective they are for the predicated you have in this query ...
Regards Nigel

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network.

I just installed Airport Extreme. It works as a wireless network on my Macbook. It won't connect with my Windows Visa PC. Message reads: "settings saved on this computer for the network don't match requirements of the network." I seem to need to enter a security key/passphrase to connect to the PC. Where do I find them?
Thanks for your help.

I assume that you have Wireless Security enabled on your AirPort's wireless network. The issue maybe that the PC is unable to use the WPA password itself and will require using the Equivalent Network Password instead.
To get this password, you will use the AirPort Utility from the MacBook:
Start the AirPort Utility > Select the AirPort base station > Manual Setup
Now, before doing anything else, go up to the utility's menu bar at the top of the screen, and then, choose "Base Station," and then, Equivalent Network Password from the drop-down menu. You will see two items: 1) WPA Password, which should look familiar to you, and 2) WPA Pre-Shared Key. It should be a long hexidecimal set of numbers and letters. Jot down this second item.
You will want to use the value you just jotted down when entering the password from the Windows Visa PC.

Is this safe for the display

Similar Messages

Maybe you are looking for