IS THIS SWITCHING MATRIX A SOFTWARE THAT AC ACTS AS A TEST EXECUTIVE OR JUST CONTROL THE MATRIX.
SWITCHING MATRIX SOFTWARE
I am not sure what you mean by SWITCHING MATRIX but TestStand 2.0.1 has two ways of interacting with switching hardware. (1) Using the IVI Switch step type and (2) Using NI Switch Executive.
The IVI Switch step type allow you to use a class layer directly from withing TestStand to perform switching operations to an IVI compatible instrument driver for a specific type of hardware switch. All configuration is defined by the steps.
NI Switch Executive is an intelligent switch management and routing application that NI just released. NI Switch Executive allows you to interactively define and name switch routes that you later call from your test application. TestStand offers easy integration between the two products by allowing you to specify at the
step level whether to connect and/or disconnect routes you define within the NI Switch Executive application. You can find out more information on the NI Switch Application at, http://sine.ni.com/apps/we/nioc.vp?cid=10861〈=US
I should point out that the downloadable evaluation versions of TestStand 2.0.1 and evaluation of the NI Switch Executive work together.
Hope this helps...
Scott Richardson (NI)
Scott Richardson
National Instruments
Similar Messages
-
I'mI looking for a software that allows me to add accessories or furniture items in the picture for interior design purposes. Is photoshop cc able to do this?
photoshop is able to do it.. the question is if you are able to do it with photoshop.
it´s called compositing and if you want it too look real it depends on user experience if it´s a scuccess or not. -
This handheld device includes software that is proprietary and confidential to research in motion limited ("RIM") and/or its affiliates and suppliers. Except to the extent that RIM is expressly precluded by law from prohibiting you from doing so, You are not permitted to reverse engineer... etc
and an "OK" button at the bottom of the agreement.
This comes up right when i turn on the phone; and i cant push the "OK"
button, I've been trying for hours.With your phone powered on, remove your battery then replace it. Try once again after that.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
I apologize if this has been answered before, but I can't
seem to find a solution in the forum archive. The error message
below displays in Dreamweaver CS3 when I attempt to edit a
Fireworks CS3 file using the "Edit" button in Dreamweaver. After
clicking "Done" in Firworks to update the file and return to my
HTML page in Dreamweaver, the error message displays. Can someone
help me troubleshoot the problem? As a side note, I tested it in my
older version of Dreamweaver and Fireworks (studio 8 versions) to
see if I would get the same error message and I didn't - everything
worked fine and no error message displayed.
DW Error Message: Making this change would require code that
is locked by a template or a translator. The change will be
discarded.
Thanks for your help,
Donna> Murray, what do you mean? My pages validated before the
switch to DW8.
Are you sure? Show us one.
The error you describe is only thrown in one of two cases -
1. You have actually changed what is being mentioned (sadly
this is most
often NOT the case)
2. You have a coding error somewhere on the page (or in the
CSS) that is
causing the template engine to burp this error message even
though it
doesn't really apply
DW4 was nearly totally unaware of 'validation' errors. DW8 is
MUCH stricter
about them. When anyone says "this was fine in DW4 and is now
not fine in
DW8" this is the first and most likely solution.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Inge Grotjahn" <[email protected]> wrote in message
news:[email protected]..
> Am 13.09.2007 schrieb Murray *ACE*:
>
>> DW4 was much more tolerant of errors in your code
than DW8 is. Your
>> symptoms are an absolute diagnostic for such errors.
>
> Murray, what do you mean? My pages validated before the
switch to DW8.
> I only imported my site from DW4 and used the existing
templates.
> After changes of the template I used DW's feature to
update all
> relevant pages automatically. Then I wondered, why I
couldn't make
> changes on the child-pages within the editable regions.
Finally I
> created the template page new in DW8 and applied the new
template to
> all my pages. Now it is working fine, although my pages
still state,
> that they relate to a DW6 template, which I never had?
>
> Best regards:-)
> Inge Grotjahn, puzzled:-)
> --
> CatManiacs World:
http://www.gwsystems.com/inge -
I used to have a itunes account and made a new one which is this one but i noticed that i have 1.00 on my account now and the one from before. is their a way i can merge both my balances to buy the new angry birds game!??
Hi Jacob...
A $1.00 credit or an authorization hold ...
The $1.00 charge is just an "authorization hold" > iTunes Store & Mac App Store: About credit-card authorization holds that will be credited back to your account usually within 24 to 48 hours.
is their a way i can merge both my balances to buy the new angry birds game!??
If it's a $1 credit from a redeemed iTunes gift card, sorry, but Apple's policy states that Apple ID accounts cannot be merged > Frequently Asked Questions About Apple ID -
Hi. NOT CALL ME FOR I AM DEAF BETTER U WRITE ONLY EMAIL.
When I run the app ALLMYMUSIC FROM WONDERSHARE after installing I get this window up.
When I log in with my Apple ID I just get:
The Apple ID you entered couldn't be found or your password was incorrect. Please try again.
I have however made sure that this is the correct Apple ID and password that I am putting in. In the Mac App Store it works.
Do you have any solution?
I am running Mavericks 10.9.2.To post a screenshot click on the "Camera" button at the top of the reply box and upload it there.
MtD -
THIS HANDHELD DEVICE INCLUDES SOFTWARE THAT IS PROPRIETARY....
I just updated my Blackberry Bold 9700 and now I can't get past this screen with the proprietary acceptance text. I have tried the following unsuccessfully:
1. Taken the battery off and put back on and re-booted.
2. Tried to update the software again by connecting to my laptop.
3. Taken the battery off, then put battery back on, when red light turned off, I pressed the escape button to possible start in safe mode. didn't work.
4. Taken the battery off, then put battery back on, when red light turned off, when re-boot started, I pressed the escape button to possible start in safe mode. didn't work.
Please help.
Thank you!nitestyx wrote:
The software and the upgrades are a disaster from a company that is totally mismanaged and lack true AMERICAN engineers.
I will never buy a BB again.
Bye. Let me get the door for you on your way out. As you're leaving, make sure you drop by some forums for other platforms to see how they're doing. I'll give you a hint if you like: I've checked them out and you won't be any better off elsewhere.
Anyway, it's your decision. You're welcome back here anytime.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
I am a professional photographer, with years of paper model releases. I would like to find a document scanning software that works with my exisiting flatbed scanner (Canon MP250) that I can customize the seach fields for (ie. name, agency, job, etc.) and also attach a thumbnail image to as a job reference. I would like the document to be searchable as well. I've looked at a few different document scanning software companies, but I haven't found one that allows me to attach a jpeg file to a scanned PDF. Does anyone know if software like this exists?
You can't do better than to use VueScan:
http://hamrick.com/ -
Need software that has passed windows logo testing
can not install the wireless Officejet 6500. The 6500 is installed on the network. Message while do installation is "windows logo testing failed to verify compatibilty with windows XP" installation will not go beyond this point. The odd part of this is that I had it installed at one time and then the installtion failed.
I have tried your XP solutions and here is the message I received "an error ocurred during installation. The driver can not be installed because it is either not digitally signed or not signed in an approtriate manner"
Where do I go from here?Hi callison11,
On the Software Installation screen with the 'Windows logo testing ' error, click Continue Anyway .
NOTE:You might receive more than one prompt about the software not passing Windows logo testing. Click Continue Anyway each time you receive the prompt.
Windows logo testing is part of Microsoft's WHQL (Windows Hardware Quality Lab) program, which helps customers identify products that are compatible with the Windows operating system. WHQL certification is not related to product functionality. You can still install and use the HP printer and software without the WHQL certification.
2. Follow the on-screen instructions until you get to the Found New Hardware Wizard screen. This screen might include a list of products and prompt you to Please select the best match for your hardware from the list below . Leave the selection at the default, and then click Next .
3. Continue following the on-screen instructions to complete the HP software installation.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution -
I have installed printer software that needs to be uninstalled and reinstalled and I keep getting an error message saying that the application is running and needs to be closed before proceeding. I do not know how to close applications and uninstall software. Any help????
If its an actual application and appears as an icon in applications then click and hold over the icon and drag it to the trash can. That should uninstall it as far as I know.
If its like the HP printer software then there is an uninstalled icon within the folder.
Hope it helps. -
MY develop module is saying I need to renew my membership but I just bought the software. My 30 day trial is over, shouldn't I be able to still work because I bought a whole year's subscription???
-
When is the iphone 5s coming out? This year or next year because I was thinking should I just get the iphone 5 or wait.
Since iOS 7 is due to be released in the fall I would say you would see a new iPhone at the same time.
-
I can uninstall the software fine by using the add/remove programs, but since we have several hundred computers I would like to script this. I am using Windows 7 Pro, and have tried with powershell version 2 & 3. The commands that I tried on
version 3 are:
$application get-ciminstance win32_product -filter "name like '%softwarename%'"
$application.uninstall()
It appears to work, I can see the object in $application before running the second command. After running the second command the object is gone, should have worked. But when I look in add/remove programs, it is still listed and the install folder is still
there. Not sure what it actually did.
After that I tried to uninstall using "wmic" commands manually. Same problem, it thinks it uninstalled, but still in Add/Remove programs.
Any suggestions about what to try next?For that you have to ask the vendor of the software why it won't uninstall. There s functionally nothing different when using WMI or MS to uninstall.
You can also use MSI and ask for a log then look at the log file.
Call the vendor.
¯\_(ツ)_/¯ -
would like to display time of occurrence and error text, so possibly a table instead of a listbox
You can check on the alliance page for a product that does this, but there are no LabVIEW utilities to do this specific task. You will have to build one yourself it seems.
-
Hi,
In our company we have a very large application that has thousands of compiled queries, and we've been getting randomly AccessViolation exceptions randomly that crashes our process.
This error happens randomly in several locations, always with the same top stack trace (data and queries are always different). do you know what could be causing this issue? or what we can do to trace the problem?,
I have collected memory dumps of the error to get the stack trace and next are the stack lines that always show at the top of it:
System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
System.Delegate.DynamicInvokeImpl(System.Object[])
System.Data.Objects.ELinq.QueryParameterExpression.EvaluateParameter(System.Object[])
System.Data.Objects.ELinq.CompiledELinqQueryState.GetExecutionPlan(System.Nullable`1<System.Data.Objects.MergeOption>)
System.Data.Objects.ObjectQuery`1[[System.__Canon, mscorlib]].GetResults(System.Nullable`1<System.Data.Objects.MergeOption>)
System.Data.Objects.ObjectQuery`1[[System.__Canon, mscorlib]].System.Collections.Generic.IEnumerable<T>.GetEnumerator()
System.Linq.Enumerable.FirstOrDefault[[System.__Canon, mscorlib]](System.Collections.Generic.IEnumerable`1<System.__Canon>)
System.Data.Objects.CompiledQuery.ExecuteQuery[[System.__Canon, mscorlib]](System.Data.Objects.ObjectContext, System.Object[])
System.Data.Objects.CompiledQuery.Invoke[[System.__Canon, mscorlib],[System.Guid, mscorlib],[System.__Canon, mscorlib]](System.__Canon, System.Guid)
The following is the windows version data:
0:222> vertarget
Windows 8 Version 9600 MP (64 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
kernel32.dll version: 6.3.9600.16656 (winblue_gdr_pres14.140305-1700)
Machine Name:
Debug session time: Wed Feb 11 14:24:12.000 2015 (UTC - 6:00)
System Uptime: 79 days 11:26:23.395
Process Uptime: 2 days 3:21:31.000
Kernel time: 0 days 0:46:05.000
User time: 0 days 17:09:10.000
.Net version: 4.0.30319.34011
Thanks in advance,
IsraelHi,
try to set the
ProxyCreationEnabled property of dbContext is set to true.
Maybe you are looking for
-
Multiple Apple Ids - One Mac Book
Hello, I need some advice. My husband and I have been going along just fine with two separate apple IDs and one computer. But recently we replaced our computer and now we're setting up our accounts on our new mac book. We've come across the issue t
-
I have moved my @me mail to icloud and now i am unable to log on through my mail on my mail. Do i need to change the servers or something?
-
How to replace bad sup in 4500 VSS cluster
I have a Supervisor 7-E on its way to replace a bad one in a 4500 VSS cluster that handles my executive row and I've just realized I only have the foggiest idea what config is required to make it join the VSS cluster. I've looked and not found anythi
-
why did apple erase ichat? its so much better than messages and now I cant video chat with my ichat buddies!!!
-
Blackberry Messenger for Curve 9300
I have set a profile picture over a week ago but none of my contacts are able to see it? Can anyone help with this