Is this the right way to implement a database using SQL Server Express?
Purchase a single central server (if you don’t have one already) and house it in the Wild Wood Apartments headquarters located in San Francisco, California
Purchase and install Windows Server 2012 Datacenter onto this single central server.
Along with the Windows Server 2012 Datacenter, you will have to purchase a license called Client Access License or commonly referred to as CAL
Install SQL Server Express onto this single central server as well
You will then need to install remote desktop access to each computer in the 20 building complexes Wild Wood Apartments owns. This allows each complex manager to access SQL Server Express on their computer and input information into the database.
Is there anything that I would have to add on or include, am I missing something, or is something incorrect?
Thank you
This allows each complex manager to access SQL Server Express on their computer and input information into the database.
Yes, but application software must be developed or purchased.
Your design would work for a small scale database and application. More likely you need a pay SS product such as Standard Edition.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014
Similar Messages
-
Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?
Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library. -
Thread safety! Is this the right way?
Hello,
Lately I'm reading lot about thread-safety in Swing...
so just wondering that is this the right way to code ...
For ex following code executes(which makes DB connection and load some list) when user press the "connect (JButton)" ....
private void prepareAndShowConnBox()
//System.out.println("prep - EDT: " + javax.swing.SwingUtilities.isEventDispatchThread());
pwd.setEchoChar('*');
javax.swing.Box box1 = new javax.swing.Box(javax.swing.BoxLayout.Y_AXIS);
javax.swing.Box box2 = new javax.swing.Box(javax.swing.BoxLayout.Y_AXIS);
box1.add(new javax.swing.JLabel("DB URL : "));
box2.add(db_url);
box1.add(new javax.swing.JLabel("User Name : "));
box2.add(uid);
box1.add(new javax.swing.JLabel("Password : "));
box2.add(pwd);
final javax.swing.Box box = new javax.swing.Box(javax.swing.BoxLayout.X_AXIS);
box.add(box1);
box.add(box2);
int retval = javax.swing.JOptionPane.showOptionDialog(me, box,
"Database Connection:",
javax.swing.JOptionPane.OK_CANCEL_OPTION,
javax.swing.JOptionPane.QUESTION_MESSAGE,
null, null, null);
if(retval == javax.swing.JOptionPane.OK_OPTION)
status.setText("Connecting...");
Thread t = new Thread(makeConn, "Conn Thread");
t.setPriority(Thread.NORM_PRIORITY);
t.start();
}And the makeConn is....
private Runnable makeConn = new Runnable()
boolean success;
Exception x;
public void run()
//System.out.println("Con - EDT: " + javax.swing.SwingUtilities.isEventDispatchThread());
success = true;
x = null;
try
//load sun JDBC-ODBC bridgr driver...
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
//make connection to DB...
con = java.sql.DriverManager.getConnection("jdbc:odbc:" + db_url.getText(),
uid.getText(), new String(pwd.getPassword()));
catch(Exception e)
success = false;
x = e;
System.err.println(x);
java.awt.EventQueue.invokeLater(GUItask);
Runnable GUItask = new Runnable()
public void run()
//System.out.println("Con gui - EDT: " + javax.swing.SwingUtilities.isEventDispatchThread());
if(success)
bConn.setText("Disconnect");
status.setText("");
status.setIcon(imgLink);
imgLink.setImageObserver(status);
//load the pic list...
Thread t = new Thread(execQuery, "List1 Thread");
t.setPriority(Thread.NORM_PRIORITY);
t.start();
else
status.setText("Connection Failed.");
showErr(x.toString());
};Here uid,db_url (JTextField) , pwd (JPasswordField) , status (JLabel) are class fields.
Thanks for any comments... :)Threading looks fine too me... the connection is created on a background thread, but (critically) all GUI updates are performed on the EDT, even if there's an exception. Well done.
My only comment is... why is your GUI creating a database connection at all? Ideally the controler would get the DAO (which would connect itself) and inject it (the connected DAO) into the view... but I'm a server-side boy, so feel free to ignore me.
Cheers. Keith. -
I have schema 'A' with few large and many small non-partition tables. I created another schema 'B' identical to 'A' and the only difference was that I partitioned the large tables resulting a combination of partitioned and non partitioned tables in schema 'B'.
I exported schema 'A' and imported it into 'B'. My question is, IS this the right way or I should done something else.
ThxIt would depend on the your goals, but I'd suspect that you would want to create most of the same indexes and views in the new schema. If you're partitioning the tables, though, you would have to give serious thought to how to define the indexes-- should they be global or local, should they be equipartitioned with the underlying tables, etc.-- which exporting and importing wouldn't resolve.
If the end goal of this exercise is just to produce the same schema with partitioned tables, transition any code & applications to the partitioned schema, and then drop the unpartitioned schema, creating the new schema just adds extra work. Create partitioned tables in the same schema (with slightly different names), load the data, create appropriate indexes, and then ALTER TABLE ... RENAME everything so that the partitioned tables now have the old non-partitioned table names.
Justin -
Being Nice to your Layout manager - Is this the right way?
Ive written a custom component that basically provides multi-line text wrapping and a few other nice things.
I had a bit of trouble when I came to implementing
getPreferredSize() getMinimumSize() This is because ideally, I'd like the component to use as much space horizontally as possible, whilst using only as much vertical space as necessary.
To do this, I used the parents width as the minimum horizontal size. This then allowed me to work out the height.
Question is - is that the right way to do it? Other than that, I just cant think of a way to get the width I need when the component is first added to its container.
Cheers for any input,
DaveIf you want it to use as much horizontal space as possible, that means you want its width to be equal to its container's width (perhaps minus a bit for borders or something). So in that case you would have to set its minimum width to that number, and that's exactly what you did. There could be other ways to do it, but yours seems perfectly fine to me.
-
I want to get all the documents based on content type using SQL Server Query. I know that, querying the content database without using API is not advisable, but still i want to perform this action through SQL Server Query. Can someone assist ?
You're right, it's not advisable, may result in corruption of your databases and might impact performance and stability. But assuming you're happy to do that then it is possible.
Before you go down that route, have you considered using something more safe like PowerShell? I've seen a script exactly like the one you describe and it would take far less time to do it through PS than it would through SQL. -
How to disable the archive logs in SAP IDES(Windows) using SQL Server
can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?
Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya -
Is this the right way of using Enhancement spots?
Hi fellow SDN people.
We are implementing some changes to standard SAP IDOC:s using the new enhancement technique and I just wanted to check with you guys about our approach. Please look at the code below and comment on our solution. Is there a better way of doing this in general? Are we using the BAdI concept wrong?
ENHANCEMENT 32 Z_IDOC_INPUT_STPPOD. "active version
* Data declarations
DATA:
con TYPE REF TO zcl_ex__badi_input_stppod1,
handle TYPE REF TO z_badi_input_stppod1,
l_oref TYPE REF TO cx_root,
e_text TYPE string.
* Instantiate objects
CREATE OBJECT con.
GET BADI handle CONTEXT con.
TRY.
* Call BAdI
CALL BADI handle->create_pod
CHANGING
processing_protocol = t_prox[]
idoc_contrl = idoc_contrl
idoc_data = idoc_data[].
CATCH cx_badi_not_implemented INTO l_oref.
e_text = l_oref->get_text( ).
MESSAGE e_text TYPE 'E'.
ENDTRY.
APPEND LINES OF t_prox TO t_prot.
LOOP AT t_prot.
IF t_prot-msgty = 'E'.
f_stat = 2.
EXIT.
ENDIF.
IF t_prot-msgty = 'W' OR
t_prot-msgty = 'I'.
f_stat = 1.
ENDIF.
ENDLOOP.
ENDENHANCEMENT.
<i></i>Hi nirre,
That's right.....
In general the thumb rule for this is:"
The enhancement implementation should be complete, let me clear with this example:
data:
begin of xy_12_12,
x12 type i,
y12(2) type c,
end of xy_12_12.
now if i want to enhance the code via implementing the implicit enhancement spot, that implementation should be complete in itself.i.e
begin of xy_12_12,
x12 type i,
y12(2) type c,
>>
data : e12 type i.
<<<
end of xy_12_12.
Hope it will clear the concept.
regrads,
Amit -
Am I going about this the right way?
Hello,
I will place the code below. I have a JTextArea that I want to read the input of my process out to. I start a process which is just a shell script from the gui using the run button and I want to get what the script is outputting, onto the screen in my JTextArea. Any Ideas would be greatly appreciated. Thanks.
import javax.swing.*;
import java.awt.event.*;
import java.io.*;
import java.awt.*;
//Sets up gui with run and cancel button, and text field for the I.P//
public class OrderVodScript extends javax.swing.JFrame implements ActionListener {
JTextField enterIp = new JTextField(16);
JButton run = new JButton("Run");
JButton cancel = new JButton("Cancel");
public OrderVodScript() {
super("Order VOD Script");
setSize(900, 500);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel pane = new JPanel();
JLabel enterIpLabel = new JLabel("Enter I.P Address or Full Path To A File Of I.P Addresses: ");
pane.add(enterIpLabel);
pane.add(enterIp);
pane.add(run);
pane.add(cancel);
cancel.addActionListener(this);
run.addActionListener(this);
JPanel textPane = new JPanel();
JTextArea text = new JTextArea(20,70);
JScrollPane scrollPane = new JScrollPane(text);
//Put them together
FlowLayout flow = new FlowLayout();
setLayout(flow);
add(pane);
add(scrollPane);
setVisible(true);
//Method to tell which button was pressed//
public void actionPerformed(ActionEvent evt) {
Object source = evt.getSource();
if (source == cancel) {
System.exit(0);
} else if (source == run) {
String ip = enterIp.getText();
try {
Process child = new ProcessBuilder("testvodscript" +ip).start();
BufferedReader input = new BufferedReader(new
InputStreamReader(child.getInputStream()));
input.readline(text);
} catch (IOException e) {
e.printStackTrace();
public static void main(String[] arguments) {
OrderVodScript order = new OrderVodScript();
}close...
String NL = System.getProperty("line.separator");
String line = "";
BufferedReader input = new BufferedReader(new
InputStreamReader(child.getInputStream()));
while((line = input.readline()) != null) {
text.append(line + NL);
} -
Implicit Fact Column - am I thinking about this the right way?
My exploration of the Implicit Fact Column is below. Let me know if you think this is the intended usage.
When the BI Server sees a request where one Dimension is being constrained by another, it has to pick a fact table that contains references to these two dimensions. The "Implicit Fact Column", which is set in the Presentation Layer of the RPD is used to guide the BI Server towards one or more Fact tables that can be used to satisfy the request. In the absence of the Implicit Fact Column, I noticed that the BI Server was choosing random fact tables so I went exploring how this feature worked. I set the Implicit Fact column in my Presentation layer and then went looking to see how the queries were generated.
For my example, my two dimensions are Program and Channel. I want to see the list of Channels available for a Program. Without the Implicit Fact Column, the queries are of the form:
select distinct T289.CHANNEL_NAME as c1,
T36001.PROGRAM_NAME as c2
from
DIM_PROGRAMS T36001,
DIM_CHANNELS T289,
SomeRandomFactTable T41210
where ( T289.DIM_CHANNEL_KEY = T41210.DIM_CHANNEL_KEY and T36001.DIM_PROGRAM_KEY = T41210.DIM_PROGRAM_KEY )
order by c1, c2
The nice part about this is that there is only one set of Program / Channel combinations returned. The downside is that the Fact table that is chosen to resolve the combinations can be any Fact table under the purview of the BI Server. It doesn't even have to be in the same subject area where the Program and Channel were chosen. When I set the Implicit Fact Column, the queries are of the form:
select distinct T289.CHANNEL_NAME as c1,
T36001.PROGRAM_NAME as c2,
T35832.DIM_SITE_KEY /* this is the implicit fact column */
from
DIM_PROGRAMS T36001,
DIM_CHANNELS T289,
AFactTableMappedToFactColumn T35832
where ( T289.DIM_CHANNEL_KEY = T35832.DIM_CHANNEL_KEY and T35832.DIM_PROGRAM_KEY = T36001.DIM_PROGRAM_KEY )
order by c1, c2
I was happy that I could predict what Fact table was being used, but now the results are wrong as I get a duplicate set of records for every DIM_SITE_KEY / Channel / Program combination. I decided to play a little Algebra trick. Knowing that the DIM_SITE_KEY was a numeric value, I defined the Implicit fact column as DIM_SITE_KEY / DIM_SITE_KEY which will always result in a value of 1. Now I get queries that look like:
select distinct T289.CHANNEL_NAME as c1,
T36001.PROGRAM_NAME as c2,
T35832.DIM_SITE_KEY / nullif( T35832.DIM_SITE_KEY, 0) as c3
from
DIM_PROGRAMS T36001,
DIM_CHANNELS T289,
AFactTableMappedToFactColumn T35832
where ( T289.DIM_CHANNEL_KEY = T35832.DIM_CHANNEL_KEY and T35832.DIM_PROGRAM_KEY = T36001.DIM_PROGRAM_KEY )
order by c1, c2
Since DIM_SITE_KEY / DIM_SITE_KEY is always equal to 1, I only get one set of Program / Channel combinations. I get the added bonus of knowing which set of Fact tables are going to be used to satisfy the request.Perfect Analysis, But one important note is when using implicit fact table, Always select measure( Which has some aggregation) as a implicit fact column. So that will allows the query will eliminate duplicate rows by doing a group by operation.
Other note is make sure performance is good. When we don't have a good model for fact tables, when the tables contains large set of data, make sure performance is good by doing indexes or caching to load the prompts.
- Madan -
Is this the right way to configure WPA2 on 1131 AP?
Hello everyone.
I, at work, have recently deployed a very small stub network in Papua New Guinea, an office that has no more than 7/8 users. This simple network consists of:
1 x 2611xm Router
1 x 2960 24port Catalyst Switch
1 x 1131ag AP
1 x Dell Server used for WSUS and Anti-Virus updates for users on the LAN.
NO VLANS - all connect to default vlan1
And that is it, no individual DNS/DHCP/Domain servers, or Radius/Authentication servers for that matter.
Originally we deployed WEP on the AP, but today I configured WPA2.
That said, below is my AP config, and just looking for confirmation if its correct, or needs further improvement (remove any unnecessary commands)?
The switch has no additional VLANS configured, the link between the switch and the AP is NOT configured as trunk.
The router does not have additional sub-interfaces. Simply put, fa0/0 goes to the public internet, fa0/1 goes to the inside switch.
Please note that wirless connectivity works OK, there are no issues, but i feel like i may have more unnecessary steps in my config than needed.
Thanks for your guidance and support.
Current configuration : 2583 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname WCS_GorokaAP
logging rate-limit console 9
enable secret 5 <removed>.
no aaa new-model
ip domain name <removed>
dot11 syslog
dot11 ssid wcs_goroka
vlan 1
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 <wpa key>
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
ssid wcs_goroka
mbssid
channel 2437
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
ssid wcs_goroka
dfs band 3 block
mbssid
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.15.241 255.255.255.0
no ip route-cache
ip default-gateway 192.168.15.254
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
banner motd ^C
* This is a secured Access Point. Unauthorized logins are strictly restricted. *
^C
line con 0
password 7 <console password>
logging synchronous
login
line vty 0 4
exec-timeout 30 0
password 7 <telnet password>
logging synchronous
login
transport input telnet
line vty 5 15
login
endthats correct.
keep this link as reference:
http://www.cisco.com/en/US/partner/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml
http://www.cisco.com/en/US/partner/products/hw/wireless/ps4570/products_configuration_example09186a00801c40b6.shtml
Please make sure to rate correct answers -
Is this the right way to use Methods on Table - Get Procedure
Hello,
I just would like to make sure that the following is the use for which
we use Get Procedure in Table API Package. ? And are there other use cases ?
If we create a package on EMP Table, we get few Procedure .eg : Insert , Update, GET
We use Get procedure when having few forms on different Tables on one page
to manually fetch the values instead of using Automatic Row Processing (DML) .
In PL/SQL process - On Load After Header. this code goes :
BEGIN
EMP_PKG.GET_EMP (
:P3_EMPNO,
:P3_ENAME,
:P3_JOB,
:P3_MGR,
:P3_HIREDATE,
:P3_SAL,
:P3_COMM,
:P3_DEPTNO
DEPT_PKG.GET_DEPT ( .......
END;And the Source Used Attribute of the items is:
Only when Current value in Session State is Null.
Regard,
FatehFateh wrote:
Thanks,
Actually, I got the idea when skimming PL/SQL best practice book. I agree with with Steven Feuerstein on most of his PL/SQL best practices, but not on the use of TAPIs.
There was a cancelled webinar by Dan - Taking Control: Integrating PL/SQL APIs with APEX.
http://www.danielmcghan.us/2013/03/webinar-tomorrow-taking-control.html
The abstract doesn't specifically mention TAPIs, but if that's the approach he was going to present then I'd disagree with it.
Which PL/SQL APIs You mean ?Packages as described by Tom Kyte in the links above. -
Is this this the right way to join them?
i have 3 tables basically liked
create table Sales_person
SalesPersonID
TransactionID
create table Customer_Sales
CustomerID
TranactionID
create table Sales
TransactionID
SoldDate
SalesItemID
SoldAmount
SoldQuanity
If I want a resulting table that show all the sales, sales person, and customer
SalesPersonID
CustomerID
TransactionID
SoldDate
SalesItemID
SoldAmount
SoldQuanity
would a sql statement like the following work?
select *
from sales s
LEFT join Customer_sales cs
on s.transactionID=cs.transactionID
LEFT join Sales_person sp
on sp.transactionID=s.transactionID
how is it different than
select *
from sales s
INNER join Customer_sales cs
on s.transactionID=cs.transactionID
INNERjoin Sales_person sp
on sp.transactionID=s.transactionIDBoth versions will "work", that is, they are syntactically correct, but it depends on what you really mean by work. The two queries are asking different questions and whehter either, both, or neither are correct depends on the the data in the tables. Your first query is an outer join, while the second is an inner join.
What the first query says is give me all of the rows in the sales table, and if there is a matching row in customer_sales give me the customer_sales information, otherwise make up a row with null in all columns, similarly for the sales_person table, if there is a match, give me the data otherwise make up a row.
The second query says give me all of the rows from the sales table where there is a matching record in both the customer_sales table and the sales_person table. If either join fails, then that sale will not be returned by the second query.
So, if it is possible that a sale could be made to a "non-customer" (i.e. no row in the customer_sales table), or not made by a sales person (i.e. no row in sales_person table), then the two queries are different.
Consider this simplified data set against your first query:
SQL> WITH
2 sales_person AS (
3 SELECT 1 salespersonid, 100 transactionid FROM dual UNION ALL
4 SELECT 1, 101 FROM dual UNION ALL
5 SELECT 2, 102 FROM dual),
6 customer_sales AS (
7 SELECT 10 customerid, 100 transactionid FROM dual UNION ALL
8 SELECT 11, 101 FROM dual UNION ALL
9 SELECT 12, 102 FROM dual),
10 sales AS (
11 SELECT 100 transactionid, 10 soldamount FROM dual UNION ALL
12 SELECT 101, 25 FROM dual UNION ALL
13 SELECT 102, 30 FROM dual UNION ALL
14 SELECT 105, 50 FROM dual)
15 SELECT *
16 FROM sales s
17 LEFT JOIN customer_sales cs
18 ON s.transactionid = cs.transactionid
19 LEFT JOIN sales_person sp
20 ON s.transactionid = sp.transactionid;
TRANSACTIONID SOLDAMOUNT CUSTOMERID TRANSACTIONID SALESPERSONID TRANSACTIONID
100 10 10 100 1 100
101 25 11 101 1 101
102 30 12 102 2 102
105 50and against you second query:
SQL> WITH
2 sales_person AS (
3 SELECT 1 salespersonid, 100 transactionid FROM dual UNION ALL
4 SELECT 1, 101 FROM dual UNION ALL
5 SELECT 2, 102 FROM dual),
6 customer_sales AS (
7 SELECT 10 customerid, 100 transactionid FROM dual UNION ALL
8 SELECT 11, 101 FROM dual UNION ALL
9 SELECT 12, 102 FROM dual),
10 sales AS (
11 SELECT 100 transactionid, 10 soldamount FROM dual UNION ALL
12 SELECT 101, 25 FROM dual UNION ALL
13 SELECT 102, 30 FROM dual UNION ALL
14 SELECT 105, 50 FROM dual)
15 SELECT *
16 FROM sales s
17 JOIN customer_sales cs
18 ON s.transactionid = cs.transactionid
19 JOIN sales_person sp
20 ON s.transactionid = sp.transactionid;
TRANSACTIONID SOLDAMOUNT CUSTOMERID TRANSACTIONID SALESPERSONID TRANSACTIONID
100 10 10 100 1 100
101 25 11 101 1 101
102 30 12 102 2 102John -
UPDATED: Is this the right way to do it?
I want to create an adress book..this is what I have...is this good?
import apcslib.*;
import chn.util.*;
import java.util.* ;
import java.io.*;
public class Address
FileOutput outFile = new FileOutput("database.txt");
ConsoleIO k = new ConsoleIO();
// Sets up this Address object with the specified data.
public Address()
System.out.print("Profile: ");
String filename = k.readLine();
System.out.print("Name: ");
String name = k.readLine();
System.out.print("Street: ");
String street = k.readLine();
System.out.print("City: ");
String town = k.readLine();
System.out.print("State: ");
String st = k.readLine();
System.out.print("Zip: ");
int zip = k.readInt();
FileOutput outFile = new FileOutput(filename+".txt");
outFile.println(name);
outFile.println(street);
outFile.println(town);
outFile.println(st);
outFile.println(zip);
outFile.close();
// Returns this Address object as a string.
public static void main(String[] args)
ConsoleIO k = new ConsoleIO();
String ans2= "";
ArrayList address = new ArrayList();
do
System.out.print("1. New Account\n2. Existing Account\n3. View account\n4. Exit\n");
String ans = k.readToken();
if (ans.equals("1"))
Address P = new Address();
address.add(P);
else if (ans.equals("2"))
String peoplename,streetAddress, city, state;
int zipCode;
System.out.print("\nProfile name: ");
String file = k.readLine();
FileInput inFile = new FileInput(file+".txt");
System.out.println("Name: " + inFile.readLine());
System.out.println("Address: " + inFile.readLine());
System.out.println("City: " + inFile.readLine());
System.out.println("State: " + inFile.readLine());
System.out.println("Zip: " + inFile.readLine());
inFile.close();
System.out.println();
System.out.print("Name: ");
String name = k.readLine();
System.out.print("Street: ");
String street = k.readLine();
System.out.print("City: ");
String town = k.readLine();
System.out.print("State: ");
String st = k.readLine();
System.out.print("Zip: ");
int zip = k.readInt();
FileOutput outFile = new FileOutput(file+".txt");
outFile.println(name);
outFile.println(street);
outFile.println(town);
outFile.println(st);
outFile.println(zip);
outFile.close();
else if (ans.equals("3"))
System.out.print("\nProfile name: ");
String file = k.readLine();
FileInput inFile = new FileInput(file+".txt");
System.out.println("Name: " + inFile.readLine());
System.out.println("Address: " + inFile.readLine());
System.out.println("City: " + inFile.readLine());
System.out.println("State: " + inFile.readLine());
System.out.println("Zip: " + inFile.readLine());
System.out.print("Do you want to exit? ");
System.out.println();
ans2 = k.readToken();
}while (ans2.equalsIgnoreCase("n"));
}Just browsing through this code I see this constructor:
public class Address
FileOutput outFile = new FileOutput("database.txt");
ConsoleIO k = new ConsoleIO(); And then in main (also in the same public scope):
public static void main(String[] args)
ConsoleIO k = new ConsoleIO(); -
i Can't upload my videos from my iphone 4s to my computer, what software should i use to do this?
As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you.
Maybe you are looking for
-
Why does calendar app icon show current date, but weather app icon does not?
i.e. At time of writing this post, the calendar app icon shows "Sunday 16" but the weather one always always always shows "23 degrees" Is there a way of fixing this inconsistency in the UI?
-
Open a pdf via vba in existing acrobat window
Hi, Part of my MSAccess 2007 management application manages document. By clicking on a document record it would open it using either OLE or DDE depending on the adobe version installed (full or only reader). I have an unsolved problem with the OLE co
-
Correct process for updating CRM Z fields from ERP Z field.
I currently have an accounts block with a field (Region) which has a drop-down list box containing values, plus another field containing the description/name of the region. Based on other fields within this same block I need to replace the Region and
-
I have Adobe Reader XI with windows XP Pro. I only use it to read constuction plans. Navigating from page to page, zooming, printing are extremely slow or not at all. Can you help me? Thanks Jerry
-
TS2755 Group text to ex-iPhone sent as iMessage
My brother switched from an iPhone to an android. My iPhone still recognizes his phone as an iPhone. When I send a group text to him and other iPhone users, it's sent as an iMessage so he doesn't get the text. I have to turn off my iMessage setting.