Is this topology supported? DCI STP

Requirements:
- DC1 N7K1 and N7K2
- DC2 N7K3 and N7K4
- DCI links N7K1-N7K3 and N7K2-N7K4
- Can't run vPC on DCI links because I need to run some point to point Layer 3 VLANs over those trunks for EIGRP peering. Don't have any more DCI links to move Layer 3 to, so have to work with just two links
- Don't pay attention to STP type, I could use RSTP+ per-vlan or MST, it doesn't matter.
Would this be supported? VLAN 100 lives in Data Center on the left, but I want to extend Layer 2 into Data Center on the right. Will STP actually block VLAN 100 on the vPC-peer link between N7K3 and N7K4?

It's a bad idea to connect DC's on Layer 2:
Layer-2 Network Is a Single Failure Domain
Layer-2 DCI and the infinite wisdom of acmqueue
Stretched Layer-2 Subnets – The Server Engineer Perspective
Busting Layer-2 Data Center Interconnect Myths
Whatever the server admins say, don't believe it's a must.

Similar Messages

Hello Folks.. I have recently purchased a ipad mini with wifi Cellular from best buy online.. Model: MD543LL/A. Can I use this ipad in India with any local networks in India? Basically does this ipad support GSM network?

Hello Folks.. I have recently purchased a ipad mini with wifi Cellular from best buy online.. Model: MD543LL/A. Can I use this ipad in India with any local networks? Basically does this ipad support GSM network?
Message was edited by: Murali.KR

Sorry but that was a completely pointless post.

Pentax Optio W60: Is this camera supported?

Is this camera supported by iPhoto? I have tried numerous ways to import the photos into iPhoto, although nothing works. Am I missing a driver? The avi. files will not play with quicktime either. Normally you plug in an sd card via usb and away you go, the iPhoto importer opens automatically. This does not happen. Nothing happens. I have saved the jpeg files onto my desktop and dragged them into iPhoto, I get this reply:
"The application iPhoto quit unexpectedly. The problem may have been caused by the Avilmporter plug-in"
I have even tried to import with image capture, but all it does is safe the jpegs on my desktop.
Help!

If the camera shoots jpeg then yes, it is supported.
"The application iPhoto quit unexpectedly. The problem may have been caused by the Avilmporter plug-in"
Remove the AviImporter plug in. This is usually found in one of two Quicktime Folders:
HD/Library/ Quicktime
or
HD/Users / Your Name / Library / Quicktime
If the avi files you import then do not play, try install Perian
Regards
TD

How do i delete this apple support acct.

how do i delete this apple support acctount?

71--
eventually it will fade away ... (unlike the Rolling Stones).
GOOD one!

Does this version support raw files?

does this version support raw files?

Kind of. Any RAW files can be imported by uploading them to Creative Cloud first. Even then, it's very basic; just importing and working with images like other image types; no RAW adjustments like those available in Camera Raw or Lightroom.
Note this implies to existing supported camera RAW files. I'm not sure about brand-new cameras. (Usually, Adobe gets around to those cameras but it's not immediate.) Try it anyway if you're not sure.

HT201303 every time i try to write my credit card info to pay for an application, this "Apple Support: Tips for Protecting Your Info" page comes up and I cannot purchase anything. I can just download the free ones. This is really annoying! How do I stop t

every time i try to type in my credit card info to pay for an application, this "Apple Support: Tips for Protecting Your Info" internet page comes up and I cannot purchase anything. I can just download the free ones. This is really annoying! How do I stop this?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

RemoteFX - None of the physical graphics processing units (GPUs) on this computer support RemoteFX.

I've been searching for some days straight to fix this issue but no success so far, I've already saw in other forums and topics here in TechNet with people facing the same issue. Here is the scenario:
Windows Server 2012 R2 Standard
All Windows Updates available until today installed
i7-2600K CPU
NVidia GTX 480 card with the latest driver installed from the manufacturer's site
Remote Desktop Virtualization Host installed
Right after I've installed the graphics driver I opened the Hyper-V Manager Console, right click on my server name, hit properties and selected the Physical GPUs then it was listing my GPU so I thought it was everything fine went to the VM property to add the
RemoteFX Adapter but it was greyed out, tried with the Powershell commands and no success so I rebooted the server and now in the properties of Hyper-V it says "None of the physical graphics processing units (GPUs) on this computer support RemoteFX. Use
of a RemoteFX 3D video adapter requires at least one physical GPU that supports RemoteFX.
From what I've searched it seems like a driver problem but already tried the latest from Nvidia website and some from Windows Update Catalog website.

Hi Rodrigo,
"I rebooted the server and now in the properties of Hyper-V it says "None of the physical graphics processing units (GPUs) on this computer support RemoteFX. "
For troubleshooting , please run "dxdiag.exe" to check the properties of your GPU after restart .
More details please refer to the article below :
http://social.technet.microsoft.com/wiki/contents/articles/16652.remotefx-vgpu-setup-and-configuration-guide-for-windows-server-2012.aspx#What_types_of_vGPU_are_supported_with_RemoteFX
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Iam using 3g with the software 4.1.2 .. my phone undergoing problems like .. struck, slow op-eration... is this version supports 3g... or else wat should i do now to keep my phone safer and faster

iam using 3g with the software 4.1.2 .. my phone undergoing problems like .. struck, slow op-eration...
is this version supports 3g... or else wat should i do now to keep my phone safer and faster

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

HT1238 I can't run iPod utility for Windows in my Windows 8 . does this apps support windows 8 ?

I can't run iPod utility for Windows in my Windows 8 . does this apps support windows 8 ?

Welcome to Apple Support Communities
iPod Utility for Windows hasn't been updated for a long time, so it's probably not supported in Windows 8. Have you tried to run it in compatibility mode?

Hello. help! My bonjour is missing for my itunes. I tried reinstalling and I get this message: "Support personnel could not write value manageLLRouting to key \SYSTEM\CurrentControlSet\ServicesBonjourService\parameters

Hello, my Bonjour was missing from my computer for Itunes; I cannot find it in my programs so it seems it has been accidentally deleted. I tried re-installing and got this message: "Support personnel could not write value ManageLLRouting to key \SYSTEM\CurrentControlSet\Services\BonjourService\Parameters". Someone please help as I am trying to get my itunes reinstalled and recognized by my phone. I use a Windows 7 software.
Any assistance is truly appreciated.
Thanks!

That particular message might be triggered by Trend Antivirus. If so disabling the real time scanner while updating iTunes and other components should work.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

HT3939 hi, I got a Iphone 5, model A1429 from Kogan. Does this model supports 4g/LTG in Australia?

hi, I got a Iphone 5, model A1429 from Kogan. Does this model supports 4g/LTG in Australia?

iPhone 5
Model A1429
(GSM model)
1 (2100 MHz)
3 (1800 MHz)
5 (850 MHz)
*Australia
Optus (including Virgin)
Telstra
Vodafone

Hi, I got a Iphone 5, model A1429. Does this model supports 4g/LTG in Sri lanka?

hi, I got a Iphone 5, model A1429. Does this model supports 4g/LTG in Sri lanka?

Hello, Monster Emi.
Thank you for visiting Apple Support Communities.
Here are a couple articles that you may find helpful with your question.
Identifying iPhone models
http://support.apple.com/kb/ht3939
iPhone and iPad: Using cellular networks while in another country
http://support.apple.com/kb/ht1807
Cheers,
Jason H.

RemoteFX Windows Server 2012 RC - None of the GPUs on this computer support RemoteFX

No matter what I've tried, I cannot enable RemoteFX on Server 2012. When I open Hyper-V Manager, right-click on Hyper-V Settings, and click on Physical GPUs, I see the message:
"None of the physical graphics processing units (GPUs) on this computer support RemoteFX. Use of RemoteFX 3D adapter requires at lease one physical GPU that supports RemoteFX."
I'm using a computer with an i7 processor, 6GB RAM, and a Nvidia Quadro FX 4800. Also, I have an ASUS motherboard with
no on-board video. Here are some of the things I've done:
Installed RDS using Quick Start, Virtual-desktop install
Installed the latest Windows 8 drivers of Quadro 4800. (Also tried the Server 2008 drivers at one point.)
Installed the Remote Desktop Session Host (which for some reason doesn't install when you use the RDS wizard)
I've tried reinstalling the OS numerous times.
Tried a different graphic card (Nvidia GeForce 260). The card is ~4 years old, but I got it working with RemoteFX on Server 2008. Once I tried it with Server 2012, it didn't work.
One more observation:
An article I read says that server must support VM Monitor Mode Extensions, SLAT extensions, virtualization enabled and
DEP which can be found in the System Information app. When I first install the OS, these fields are marked as
Yes, but once I install Hyper-V (separately or using the RDS install wizard), these fields disappear and are replaced by the text: A hypervisor has been detected. Features required for Hyper-V will not be displayed. In
the article, it says this text is usually an indication that the machine that the OS is installed on is virtual. Not sure if this is actually an issue.
I feel like I'm missing something really simple. Like I said, I've gotten RemoteFX working on Server 2008.
Thanks.

the card is dx11 compatible and has been for the last 6-7 months
Driver for NVidia Quadro FX 4800
* Support for newly announced Quadro 6000, Quadro 5000 and Quadro 4000.
* Adds support for CUDA 3.1 for improved performance in GPU Computing applications. See www.nvidia.co.uk/cuda for more details.
* Adds support for OpenGL 4.0
* Adds support for DirectX 11
* ECC State
o New page for GPUs that support ECC (error correction code). The page lets you
1. Change the Error Correction Code (ECC) state for GPUs.
2. View GPU memory details.

I have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

i have just installed the new os x mountain lion - and now i cant enter the parallels desktop 6. does this version support parallels? what can i do? thanx

You'll need to upgrade to Parallels Desktop 7 to regain compatibility. Good luck....
On Edit: A minute late!

Will this laptop support a sata hard drive?

Running an HP Pavilion Model dv4-2145dx.
Will this laptop support an internal 1T SATA Hard Drive?

Yes as long as it is a 9.5 mm thick 2.5 inch wide drive. Some 1 TB 2.5" SATA drives are 12 mm and are designed primarily for Blade Servers, not laptops. This one will work:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822152291
The other problem is that 1 TB laptop drives are maximum 5400 rpm. I personally will not use anything but a 7200 rpm drive since they perform much better. I believe the biggest 7200 rpm drive you can get is a 750 gb.

Is this topology supported? DCI STP

Similar Messages

Maybe you are looking for