Is this yet another problem with 7.5 or is it just me . . .

Upgrade seemed to be fine, at first . . . now I keep getting distortion on songs. It seems to be quite random and just because a song has been distorted when I've listened to it once doesn't mean it will be when I listen to it again! It's driving me insane. Is this yet another bug or have I done something wrong (apart from upgrading to 7.5).

Hi Emlou,
If you have a Windows based operating system such as XP -
It seems to me that you are suffering what I am having the same problem with - the program takes up to much of your computer's processing usage. If you go into your task manager and watch performance as ITunes runs - you will see how much of the total computer usage it is taking at any given moment - that's why your songs are distorted, slowing, garbled, etc - the usage on mine spikes from 11% - 93% AT ANY GIVEN MINUTE! I have no idea why, but I have found that by going to your "Control Panel" and clicking on Quicktime you can adjust audio output to help. Click the audio tab, click Safe Mode Wavout only (checkbox) / Then adjust the "Rate" to 96kHz / Then adjust the "Size" to 16 bit. Close that and shut down and restart Itunes - it might help a little for you.
Maybe someone out there can help us find out why we are suffering with all the CPU usage trouble and how to adjust that spiking.
Thanks!
Paul

Similar Messages

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer.

[yet another] problem with proxy

On my PC, sometimes I am connected directly to the Internet and sometimes via VPN. In the latter case, all Internet traffic goes via http/https/socks proxy. In either of these situations Skype works well, but...
The is a problem when I disconnect from VPN, that is:
1. I am connected directly to the Internet
2. Skype is working well
4. I connect to VPN
5. Bang...Skype gets disconnected and does not manage to re-connect
6. I re-start Skype and everything is OK (that is, Skype starts working via proxy)
Funny thing is, that in the opposite direction (when I start Skype while connected to VPN and than disconnect the VPN tunnel), Skype manages to detect this (probably because the VPN network interface goes down) and re-connects automatically. However, it cannot re-connect automatically when VPN tunnel is established.

finally ive got some one suffering in same problem.
hei buddy me also having the same prob.
i use cakewak for recordings
during recording there is no prob
but when i play the tracks my new recorded track started to get faster then the previous track
as i play guitar on the basis of drums track
after a min it is no more on beat
its beame half socond faster
havent you solved your prob yet???

Ok, yet another problem with my mini...frusterating much?

Alright, I have an iPod mini, it is a 4 Gig Ipod mini, said to hold up to a thousand songs or so. Mine currently is holding 438 songs. My itunes on the other hand has 703 songs, and only holds up to 3.69 gigs. Which leaves me with a fair bit of room I would think. I am hesitant to use the restore to factory settings thing and erase everything since i have had such trouble with that in the past. My ipod says there is not enough free space to hold all those songs and furthermore I have lost quite a few off of my mini. I don't know what I should do and how to go about it! Any help would be wonderful. Thanks.
Sarah

No in actual fact its about 449, I went and restored my ipod, and that's pretty bad if they advertise it for 4 gigs and only give you 3.7 gigs. But in any case it has held up to 703 in the past, which is how many I have in my library at the moment. But it just spent about six hours updating and hasn't moved which I don't understand. Should I restore it again? I don't know what else to do, I can get rid of some of my songs, but I wouldn't like too, there is enough space for all my fav's. So I'm at a loss of what to do. Help? Also, when I was having trouble before it did this as well, but I don't know how I fixed it, it was quite a few months ago. I keep getting this error that says " disk cannot be read from or written too" does that have something to do with my usb port?

Another problem with SOAP sender

I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this.

I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this.

Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101

Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..

sorry for my bad english ..

Having a common yet unfounded problem with

Hello
Having a common yet unfounded problem with my trackpad, or is it?
First, The trackpad has always worked just fine on my iBook Dual USB 800 MHz, like most folks I use a mouse when I am on the laptop, so i trried to use the trackpad the other day and I noticed 2 things...
It wasnt functioning and the trackpad feature was missing from system prefs mouse and key board (running OS X10.4.11)
so I haven't used my trackpad in months, i try to test it and piff! nothing...
there is one final point, hours before i chose to tes tthis the book took a tumble on its right front corner, so naturally this could be a if not the contributing factor?
any ideas?

Did you unplug the mouse when you tried to use the trackpad? If not, I would suggest that you try that.
If the trackpad doesn't work when no mouse is plugged in, you may want to try resetting the PMU.
The PMU (Power Management Unit) controls trackpad function, so resetting it often helps when the trackpad isn't working (or isn't working right).
If the trackpad still doesn't work after resetting the PMU, chances are the fall may have something to do with the trackpad not working. If you're lucky, it may just be that its plug has jiggled loose from its connection. Detailed instructions on plugging it back in can be found in this comprehensive post by Michael Baker:
http://discussions.apple.com/thread.jspa?messageID=1034519#1034519
Good luck.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Problem with connecting to a website. Just purchased a new iMac with Version 10.10.2 Yosemite. Once in a while I have trouble connecting to a site. It takes forever. Is this an issue with Yosemite or my internet service?

I purchased this iMac in Feb. 2015. When I try to connect to a web site using Safari or Google Chrome I usually have no problems getting connected to the site. But maybe once a day I will try to connect and I will see the blue progress bar at the top of the screen showing it is trying to connect and then it just stops. It may take a couple of minutes before it connects to the site.
Would this be a problem with OS X Yosemite Version 10.10.2 ? Or would this be a problem with my internet company?
Thank you,
Laurie

Hi lauriefrommi,
Welcome to the Apple Support Communities!
i understand that you have some intermittent webpage loading issues while using Safari on your Mac. In this situation, to ensure that Safari is working as it should, I would suggest reading over the attached article and using the information to make sure Safari has no unsupported third-party add-ons.
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
Best regards,
Joe

My ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes?

my ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes if I downloand straight from itunes.com?

Your content is stored locally on your computer, when you update, it will not mess with your content at all.

I have so much trouble with the plug in part of the program I want to disable this in Mozilla. I have to go to windows explorer to get around this plug in problem with Mozilla.

# Question
I have so much trouble with the plug in part of the program I want to disable this in Mozilla. I have to go to windows explorer to get around this plug in problem with Mozilla

Depending on the CSS, live view and design view can be totally different.
Its often best to type in your copy in the divs and then add the CSS to format it.
Post the css and the set of divs with some content in order to enable people to try work out what is wrong.

This is my problem with nokia 5800:

this is my problem with nokia 5800:
my phone is updated.
sorry my english isn't good
1. music player have too much problem and player hang too much,too much ,too much.and earased playlist and all songs in playlist and from music player then i should earase songs from my phone then retransfer to phone
2.music player sometimes hang at the end of song and I should restart my phone!!!
3.Oh INTERNET!often when I work with internet and click above a link phone hanging and restart browser and I huffy!!!
4.messageing has not recently use numbers and I should alwayes add my numbers from contacts but nokia java mobiles in part of "To" has recently used numbers shortcut!!!
5.when dialling a number and failed,I should heare the error trump for 7 second and don,t disconnect with any key!!!!
6.after i update my GPS some of entertainments isn,t in new version, such as take photo from map nad altimeter and ...!!!
7.photo camera has not sound off or intercept the voice!!!
8sometimes remot of player dosn't work and I should pause music then replay to work the remote
9.the camera has not 16:9 aspect ratio.but 5800's lcd is 16:9
10.Note applicatin has any shortcut for sorting notes
11.bluetooth should saved in phone memory and if memory be full or the shared file is longer than memory phone we can't save that on phone!!!
12.delivery report dosen't shown at inbux and I should that from Delivery report part and if number of messages is more than 20, we can't know delivery report!!!
13.

1.
2. Their different teams. As I said, this is not a big issue unless more people send emails to Nokia asking for it, and no, as far as I can see, only a minority cares for this issue. Nokia will not spend to develop something in an OS that only a few people care about.
5. Its an OS design. Either live with it or buy a new phone.
7. It seems you do not understand what "country dependent" means. It depends upon your country's rules and regulations if this is available, and if the majority of the countries in the world are making laws for the prohibition of silent cameras, Nokia cannot do anything about it. If they break this law, then that country will not allow Nokia phones to be sold in that country, which is bad for Nokia. Personally I dont understand why people want to remove shutter sound.
9. The setting to get 16:9 ratio is yes, software, but you also have to consider the sensor hardware. The sensor hardware is able to receive light in the same ratio as the pictures, and not in 16:9 ratio. Hardware cannot be adjusted. You yourself said you work with an SLR camera, and if you look through the viewfinder, you see that the camera lens sees the view in a "square" ratio as well like the phone. Creating software to render a picture in 16:9 ratio is just simply creating software that cuts off the reception of light in the top and bottom part of the picture so as to create a 16:9 effect. Meaning the camera is not utilizing the full 3.2 megapixels of the phone, and the result is just the same as getting the picture you took and editing it on your PC to show a 16:9 ratio.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

I couldn't install iTunes on my laptop and showed me "This is a problem with this windows installer package a program required to install to complete could not be run. Contact your support personnel or package vendor '.Windows of my laptop is win8 Enterpr

Dear supporter
I couldn’t install iTunes on my laptop and showed me “This is a problem with this windows installer package a program required to install to complete could not be run. Contact your support personnel or package vendor ‘.Windows of my laptop is win8 Enterprise Build 9200, 64bit.
Best regards
Majid

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Over the course of many years I seem through using different computers to have several apple ids and three email addresses, this is causing problems with synchronising, I have an iPod, iPhone and ipad

Over the course of many years I seem through using different computers to have several apple ids and three email addresses, this is causing problems with synchronising, I have an iPod, iPhone and ipad

Hi there
Sorry for hijacking your thread as put by Dahveed. However I have resolved my issue so I thought I'll share it with the rest of you.
I checked for the error 3194 in youtube and I found some good videos that tell you how to resolve the problem. The issue I was facing was the actually (I know because I have resolved it now) the communication between my computer and apple server which can be fixed as following (if you are using windows):
There is file in following directory:
C:\Windows/system32/drivers/etc/hosts
The file normally has no extension and it is in file format. You need to open it and make sure that every line that has apple server id starts with "#". In my case one of the line started directly with the ip address and then gs.apple.com.
Perform your restore/update after that and hopefully it should be resolved (mine did).
Cheers

Is this yet another problem with 7.5 or is it just me . . .

Similar Messages

Maybe you are looking for