Is thr are any other events apart from PAI,PBO,POV,POH in ABAP Programming

Gayathri

Hi,
PBO,PAI,POV and POH these are the only events available in  Module pool programming.
<b>Below i give you the Classical  Report Events.</b>
Initialization.
at selection-screen.
at selection-screen on value Request.
Start-of-selection
end-of-selection.
Top-of-page
End-of-page.
<b>Events in Interactive Reports</b>.
Addition to the Classical Report Events below Events are used in Interactive Reports.
at line-selection.
top-of-page During line selection.
Reward Ponts if Helpful.
Thanks & Regards,
Ashok.

Similar Messages

  • 3GS GPS - Way out on accuracy - any other solutions apart from these:

    Hi,
    This seems to be a common theme from what Ive gathered.
    Ive tried;
    Rebooting the handset
    Switching 3G Data off
    Switching the compass from true to magnetic north
    And yet the location is consistently wrong using, Google Maps, Google Earth, a Twitter app which uses your location, and a third party application which uses the GPS.
    I have the latest software on the handset. And Ive tried using the gps both at home and in the city centre where I work.
    Everytime it says Im way away from where I actually am.
    I have the 3GS 32GB which is the top line model. Surely this should not be an issue with this?! I have only had the handset for a few weeks.
    Ive read up on the blue circle and the dots that show your location, and what they mean. Apparently as the sign indicating a near pin point accuracy is incorrect it suggests it could be a hardware failure.
    Is there anyway to check this?
    Thanks

    Almost 2 months ago I had the same problem.
    I did almost everything.
    So at the end I sent it to service.
    Here in Greece the service time *****, so it took them 5 weeks to sent it back to me "fixed".
    And I said "fixed" because I could have done it myself.
    They just did a Reset Network thing.
    It worked.
    But I writing this to tell you as well that the case I had on my iphone was messing with the GPS signal.
    Because before I sent it to service I did restore and reset everything (and network settings) but the iphone was still wearing the case.
    When I receive it it worked for a day, and the next day began the same triangulation problems.
    It showed me about 500m away.
    What was the difference the case.
    And how it regained the signal, by doing a Reset Network Settings.
    From time to time it looks like it looses the signal, but with a Reset Network Settings it has it back.
    my 20000 cents ( I type a lot :P )

  • Does CRM supports firefox and other browsers apart from IE

    Hi,
    can you pls share if CRM supports firefox and other browsers apart from IE. are their any specific settings to enable other browsers?
    any documentation would be helpful.
    thanks
    RH

    RH,
    From The PAM choose the link SAP Application Components->SAP CRM.
    Then pick your release of CRM.  Then in the release detail information,  choose the web browser and/or web browser platform tabs.
    I.e. I did this for CRM 4.0 and found that basically only IE was supported for IC webclient.
    Take care,
    Stephen

  • Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
    If you get this message:
    then you need to right-click on the installer package and select 'Open' when you get this message:
    If this isn't your issue you need to be more specific about what is happening.

  • What are the major situations  to go to the short dump in abap programming?

    What are the major situations  to go to the short dump in abap programming?

    Hi,
    The major situations that an ABAP Program can result a dumb are as follows...
    1) Poor coding i.e., if the data in the data base is less, then even a poor code can give you the result.  But when you transport the program into Production, then there the same program will give you a dump, resulting 'TIMED OUT' error.  So performance tunning is required for each and every program.
    2) while calling a function module.
    3) extracting of data into fields which are not type casted.
    4) in case of x/y value, one should check the value of 'y' should not be zero, else a dump will result.
    these are few which i can give for time being........

  • Is there any way through which I can stop download of my ABAP programs???

    Dear all,
    I want to know is there any way through which I can stop download of my ABAP programs so that no one can download or copy my programs without my permission.
    Thanks in Advance
    Sachin Gautam

    Hi again,
    1. In that case we cannot do much.
    2. However,
       we can use
       the exit
       SEUED001
      (fm is EXIT_SAPLS38E_001)
      to restrict the program
      in edit mode,display mode
      etc etc.
      depending upon the PROGRAM NAME.
    I hope that serves your purpose.
    regards,
    amit m.

  • How can we interface external usb camera or usb device(storage, card reader) to Ipad 2.What all things are need(any development Kit apart from IOS sdk)

    Hi,
    Before going any further in my research, I want to know the views and opinions about the intent of my work I am about to start.
    AIM : I am trying to interface an external uvc camera with the ipad 2 and iphone .Just like in android there is a node(in unix and linux everythign is a file)which gets created in the /dev/ directory which can be accesses by the application using the native interfaces (JNI) and finally via the android code.I am trying to develop the similair application for the ipad 2 and iphone.
    Can some one plz point out :
    (1) How I can interface external hardware like ( external uvc camera) or any other USB device(a card reader, a storage device, a barometer etc)
    (2) I have googled about Apple's Authentication chip which can be used to interface the external h/w.Can some one point out how useful it is.Is this related to that somehow.
    (3)What are the things similair to JNI, node, /dev/ in the IOS for Ipad 2 and Iphone.
    I will be highly obliged ,if some one could provide me the top pointers on it.
    Thanks and Rgds,
    MangoApple

    1.) See
    External Accessory Programming Topics
    Connecting to an Accessory
    Monitoring Accessory-Related Events
    2.) See the MFi Program

  • I have pre-ordered an album and all of the songs are available for download apart from one which is listed as 99p to buy?

    Hello, I hope someone can help me.
    I pre-ordered Justin Timberlake's new album and have tried to download the album today, however for some reason "Suit & Tie" is listed as unpurchased and will charge me 99p to download?
    All the other tracks have downloaded fine apart from this one.
    A couple of things I should mention in case they affect this issue:
    I am trying to download it directly to my iPhone - I have not loaded up iTunes on my PC as of yet.
    I already have the song "Suit & Tie" as a single.
    Will iTunes realise I technically already have the song so charge me less and just give me the remainder of the album?

    We are having this same issue.  We have over 200 songs that are now missing and only our most recent ones show up in our ITunes library.  Fortunately we have one phone that still has all of our music still in tact. This phone is no longer one I will be using as I upgraded to the Iphone 6, and only the most recent purchased songs remain.  The rest are no where to be found and the iTunes store shows that I would need to re-purchase.  Not sure what to do as when I tried to sync my last phone, all the songs were gone.

  • Ways to retrieve data into Jsp page on ComboBox (or any other event ) event

    Hi all,
    I want to retrieve records from database and display it in Text field.
    Can any one tell me the ways to do it, i know i can do this by using javascript (javascript to submit the form), but i dont want to use javascript any where in my code,
    what i want to know is there any other ways to implement this functionality, and which is the best one.
    Kindly help me,
    Thanks in advanced.

    With plain webapps, there is no way. In one way or another, the server needs to be invoked to be able to provide the data, so that is either a submit or through an Ajax call. Both would involve javascript. Why are you scared of Javascript anyway?

  • TS1702 Why won't apple support my 1st edition iPad any longer. Apart from greed?

    Why will apple no longer support my iPad 1.
    I am no longer able to read magazines I have subscribed to because the app now needs iOS 6.
    And apple won't let me upgrade my software.
    Rip off I thinks.

    Neither Apple (nor any other company) will support a product forever. The iPad one is, by technology standards, obsolete. It has nothing to do with corporate greed - unless you define greed as making a profit.
    Your iPad still works, apparently. If you wish additional functionality, buy a new one - it is your money and decision.
    Barry

  • Is there any BAPI or FM to authorization object to user in ABAP program??

    Hi guys.
               My requirment is to assign  authorization object to user in ABAP program,is there any FM OR Bapi to do this?

    Hai  ,
    In order to do the authority check in the program ,   in your report at selection-screen event   you need to check for the corresponding authority output .
    example :
    T SELECTION-SCREEN ON p_carrid.
      IF p_carrid IS INITIAL.
        MESSAGE 'Please enter a value' TYPE 'E'.
      ENDIF.
      AUTHORITY-CHECK OBJECT 'S_CARRID'
                          ID 'CARRID' FIELD p_carrid
                          ID 'ACTVT'  FIELD '03'.
    Regards,
    K.VinayKumar

  • Deleting data from an Infocube in BW using ABAP program?

    Hi Everybody,
                       I have to create a ABAP program in SE38 which, on execution will delete selected data from a Cube in BW module. How to achieve it. Is there any function module that can do so? Eagerly waiting for your suggestions.
    Regards,
    Pulokesh

    Dear Ravi,
                  Other than two parameters I_INFOCUBE, I_SHOW_REPORT do i need to pass any value to the table I_T_SELTAB.
    Regards,
    Pulokesh

  • Deleting selected data from an Infocube in BW using ABAP program?

    Hi Everybody,
                       I have to create a ABAP program in SE38 which, on execution will delete selected data from a Cube in BW module. How to achieve it. Is there any function module that can do so? Eagerly waiting for your suggestions.
    Regards,
    Pulokesh

    select the records from the cube or  ods and put in to one internal table.
    and then u can delete the records

  • How to get a parameter from BPC and use it in ABAP program

    Hello gurus!
    I got a problem...
    SAP BPC will send parameters such as year, division, category, company code and so on via script logic to SAP BW.
    I need to get these parameters from BPC and use them in a ABAP program as a filter.
    This ABAP program will do several routines and return new values to BPC. It must be made on ABAP and I need to filter data to avoid performance issues.
    Does anybody knows how to do it? or have a example of it?
    Thank you in advance.
    Regards,
    Rubens Kumori

    Hello, I'm looking for a suggest.
    I need to pass two parameters (users can input them in a data manager package in bpc) to a BAdI.
    In this BAdI I write a code that store those parameters in a InfoObject.
    The problem is:
    - one parameter is for CATEGORY value. CATEGORY is a dimension of the application and I read the value with a code like this:
          READ TABLE it_cv INTO l_s_it_cv
               WITH TABLE KEY dim_upper_case = 'C_CATEGORY'.
    - other parameter is a generic DATE. this parameter is not a dimension of the application and I don't know how I can retrieve this value in BAdI.
          READ TABLE it_cv INTO l_s_it_cv
               WITH TABLE KEY dim_upper_case = '.....'.
    The data manager dynamic script is:
    PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%")
    PROMPT(TEXT,%SELECTED_DAY%,"Write the date (format YYYYMMDD)",)
    I also have a dynamic constant that assign the name %CATEGORY_DIM% to "C_CATEGORY" value.
    Can anyone help me?
    thanks a lot
    Edited by: Luca Novali on Feb 13, 2012 3:49 PM

  • The latest version of iTunes doesnt allow me to click on the song titles heading and locate the desired song from my Purchases. Are any others experiencing this?

    Is anyone else having difficulty searching for their desired song using the latest version of iTunes? it used to be that I could click on song titles and just type in the first three or four letters and it would go straight to my song. This is no longer the case.

    Hi Hale,
    Welcome to the Support Communities!  The resource below provides an overview of the new iTunes 12 interface.  If you are looking for a song in your library, you can click on the My Music tab at the top of the page.  At the top-right corner of the window, choose to view your music by Song, and sort by Name see an alphabetcial list of your music.
    Using the new iTunes - Apple Support
    http://support.apple.com/en-us/HT203128
    iTunes 12 includes dedicated icons for music, movies, or TV shows, which make it easier to get to wherever you want to go in your library with a click. You can use the same controls to switch media types whether you’re browsing the iTunes Store or browsing your library.
    You can even choose the media types you always want to see. To access more media types, click the More button (three dots) in the upper-left corner and click Edit. Select your favorite media types in the pop-up menu, then click Done.
    List view
    To view your music by Song, Album, Artist, Composer, or Genre, click the current view under the Search tool in the upper-right corner. A pop-up menu of other views will appear. When you select one of the views in the menu, you'll see additional options for the view you're currently on, like Sort By Title or Rating.
    I hope this information helps ....
    - Judy

Maybe you are looking for