Is Time Capsule vulnarable with Upnp aka Port Mapping vulnerability?

As you also might have already heard about this quite huge upnp vulnerablity, I tried and failed to find out if Time Capsule or other Apple's network products are using this bugged libupnp library or not.
As a backup device it would be quite nasty if someone could hack in to the device and wipe all backups. US-CERT's list of manufacturers does not include Apple, so this is not helping much.
http://www.kb.cert.org/vuls/byvendor?searchview&query=FIELD+reference=922681&sea rchorder=4
So what to do, should we turn port mapping protocols off until Apple fixes this problem, or are we already safe with the Time Capsule's latest 7.6.1 version?

Apple do not use upnp.. they use their own entirely different protocol.. NAT-PMP so whatever the upnp vulnerability is, I doubt apple has it.

Similar Messages

Time Capsule will not allow new Port Mapping

Set up a new time capsule, did not migrate setting from old just in case I needed it for a backup,
Gave the new time capsule the same name and all other information, just as the original to clone it.
With the exception of all the port mappings; system allowed me to setup "Personal Web Sharing, IMAP Mail, IMAP Mail with SSL, POP Mail, SMTP Mail and Apple Remote Desktop, but will not allow me to add any others with names like, Kerio Workspace, VPN, SSL Web, some have the same Private IP as the allowed port mappings and other have different ones.
what am I doing wronge?

Loads.. one of them being vpn passthrough having issues due to the TC using IPSEC internally for BTMM.
You might find this is not possible to fix.. but make sure the TC is not double NAT.
If you have another router in the network the TC must be in bridge.. but if the TC is the main router and no double NAT you might need to replace it with something less Apple!! Something that tells you by logs and SNMP what is going on.. and keep the TC bridged for TM backups and wireless..
Sometimes it is easier to surrender.. than fight city hall.

How can I change the settings in my time capsule to support UPnP?

Trying to change the settings on my time capsule to support UPnP so I might remotely access 3rd party software. Any suggestions?

Apple routers do not support UPnP. They do support NAT-PMP, but that requires that you manually enter in the port values to set up what is known as Port Mapping.
But, first things first. is the Time Capsule set up as the DHCP and NAT router for the network, or do you have another router upstream from the Time Capsule on the network?
Another way to ask the same question......what is the make and model number of the device that you call your "modem"?

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Time capsule slow with macbook pro

Hello,
I'm using a Time Capsule 2T with a MacBook pro 2.0Ghz Intel Core i7, 8GB ram, OSX 10.9.2.
I have a 10mbps internet plan and it works perfectly with my iphone or ipad mini using the wireless signal.
But with my macbook pro, the speed goes down to 1mbps, at maximum...
I've reseted my modem, the Time Capsule, macbook and nothing changed...
Does anyone know what could be happening?? Tks!!!

Have you tested with ethernet? From the specs of your machine it should still have ethernet port.
That is the first test.. with wireless off.. as it helps to establish if the issue is just wireless or is some network problem. If it is still slow post back without doing anything else.
Next test.. copy a file to the TC.. use a big file, a system update or some such.. copy it from the computer to the TC.. and TC to the computer. What speed do you get??
That establishes if the problem is wireless overall or is it wrongly setup somehow.
Test with wireless should be about 3-5M from the TC.. no need to be right next to it.
Make sure ipv6 is set to link-local in wireless setting on the computer.
Do the wireless diagnostics, which is built into the OS. See http://support.apple.com/kb/HT5606
Follow all the wifi best practice.
No luck post back your test results.

Weird: why would a network drive named "time-capsule-de" with an icon of an old-fashioned PC monitor appear on my home network?

Weird: why would a network drive with the name "time-capsule-de" and an icon of an old-fashioned PC monitor suddenly appear on my home network?
It happened shortly after I'd set up a new Time Capsule with our iMac and had transferred the configuration for it over from my old Time Capsule.
I'd just taken the old Time Capsule into another room and powered it up with my MacBook to confirm that Airport Utility's wiping of its settings hadn't affected the old Time Machine backups still stored in it.
I was in the process of tinkering to see how I could use the old Time Capsule, when Airport Utility offered to "extend" my home network, so I tried that setting, and then got a warning that the old Time Capsule and its wifi networks were not yet secure or private. While I was working to fix that, I noticed that in the Finder sidebar and in my Network settings, this mysterious "time-capsule-de" (with an odd old-fashioned PC monitor for an icon) had appeared. I tried to click on it, but could not access it. I also could not eject it. I shut down my old Time Capsule and my MacBook. When I turned the laptop back on, "time-capsule-de" was gone.
What do you all make of that? Should I worry about the security of my home network? I live in an apartment development, so there are more than a dozen stray wifi signals pouring in from other units.
I'd welcome any thoughts or suggestions. Thanks!

What is the name of your old Time Capsule? Did you change the name to the new one?
It appears in Finder .. that is to be expected.. it is after all a network drive.. and it has PC symbol more than likely because you are using Mavericks which defaults to SMB network.. ie the computer thinks it is a windows computer.
There is nothing bad or sinister going on.. but you certainly need to ensure your own wireless network is secure..
That is otherwise all fine.
If the TC shows up again, check that it is also in the airport utility and check its MAC address with the label on the bottom.. It will show in the Utility .. then you can compare and check you are reading the right thing.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update

The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!

I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???

Time Capsule shows with wrong name on Time Machine

I changed the name of my Time Capsule using airport. However, Time Machine still shows the old Time Capsule name, with the new name underneath. When I try to back up using this disk, it shows the following error message:
"Time Machine could not complete the backup. The backup disk image "/Volumes/Old Time Capsule name/My laptop name.sparsebundle" could not be accessed (error -1)."
I don't know how to fix this. I have looked everywhere. I deleted the NetworkInterfaces.plist file in Library/Preferences/SystemConfiguration, and even made sure to do a secure empty trash. I even did a soft reset of the Time Capsule to the factory configuration, and renamed the Time Capsule all over again. I restarted the computer several times during this process, and yet no luck, it still shows the old Time Capsule name.
Does anybody know how to fix this? Thank you!

Ok, the MacBook is backing up now. Here is what I did:
After manually changing the name of the Time Capsule Disk as above, Time Machine was still not able to back up. I kept getting the error message
"Time Machine could not complete the backup. The backup disk image "/Volumes/Old Time Capsule name/My laptop name.sparsebundle" could not be accessed (error -1)."
The problem is that "My laptop name" Time Machine was using is wrong. I had changed the laptop name in Network Perferences>Sharing before, but it still kept looking for the wrong .sparsebundle file in the Time Capsule. I don't know why, and I even deleted the NetworkInterfaces.plist file again with no success.
I entered the Time Capsule from the Finder menu, found the .sparsebundle file with the wrong name, and manually deleted it. Finally the MacBook was able to backup. However, although the MacBook name is the same as it used to be before, and even though there was already an old .sparsebundle file with the correct name, Time Machine created a new .sparesebundle with the same name, and began an entirely new backup. I am just letting it do this backup, and then I will manually delete the old backup, so it doesn't take space on the Time Capsule. I don't need the past backups (and hope I won't swallow my words), and I am tired of dealing with this, so this will be it.

Extend Time Capsule network with another Time Capsule

Hi guys.
Like the title says: I want to extend the wireless network of the dual-band Time Capsule (2TB) with a first generation Time Capsule (500GB).
So, I opened AirPort Utility, selected the older model and completed the logical steps (extend another network wirelessly), but it doesn't restart. It hangs there, with the orange light blinking...
What should I do to make it work?
Thanks.

Welcome to the discussions!
Check your settings as follows:
On the 2TB Time Capsule, open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode = Create a wireless network
There must be a check mark entered next to Allow this network to be extended
On the 500GB Time Capsule, open AirPort Utility and click Manual Setup
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as your 2TB Time Capsule
Enter a check mark next to Allow wireless clients
Wireless Security = Same setting as your 2 TB Time Capsule
Wireless Password = Same password as your 2 TB Time Capsule
Update to save settings

Will the wifi function of time capsule interfere with my existing router?

Will the wifi function of time capsule interfere with my existing home network via my Cisco router?

Welcome to Apple Support Communities
The routers will only interfere if they are working with the same channel. Time Capsule sets up automatically the channel, so you shouldn't have any problem with both routers

Time Capsule & Airport with a new modem WiFi

I have a MacBook Pro and a Time Capsule with Airport. I have a new modem from my Comcast Internet provider that has WiFi Built into it. If I use the modem for my WiFi, will my Time Capsule connect with my MacBook through the modem Wifi? And how can I know which Wifi will be the stronger?

Plug the TC into the new modem with a decent length ethernet cord.. a few meters..
Then simply setup roaming network.. so both the TC and the new modem will reinforce each other.. the setup is easy.. Bob at least says it is.. automagically from the new v6 utility.. but it is not hard to do manually either IMHO.
The basic rule is simple.
TC in bridge.
TC creates a wireless network. Same SSID.. ie wireless name Same security .. ie WPA2 AES = WPA2 Personal.. same password.
Voila there it is. although using different channels can be helpful.. if you run into problem.
Now you don't have to worry about which is stronger.. the MB will connect to whichever is stronger.. without human intervention.
Ask Bob to elaborate..
https://discussions.apple.com/thread/5146401?tstart=0
BTW the roaming network document is a help.
http://support.apple.com/kb/HT4260
The fact that you have one apple and one non-apple router here makes no difference except in terminology.

Will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard 753S Mobile Hotspot)??

will the airport devices and time capsule work with telstras mobile hotspot (Sierra Wireless AirCard® 753S Mobile Hotspot)??

Yes. There are 2 ways you could use these devices:
Wirelessly 'join' the network. This would be slower and doesn't offer extending functionality.
Use an Ethernet cable (through Powerline if you can't run a cable). This is faster and offers extending functionality. I would recommend using Bridge Mode if possible.

Will an older "Time Capsule" work with Mountain Lion?

will an older "Time Capsule" work with Mountain Lion?

It should do. Depends on how you define an 'older' TC. As long as your SW is up to date and the TC has relatively recent Firmware etc then there shouldn't be an issue.
Are you having a problem with yours or just curious before you upgrade the OS?
Regards,

How can I view my time capsule pic with my iPad

How can I view my time capsule pic with my iPad

What do you mean by "time capsule pic"
Do you mean pictures stored on the TC?
The ipad has no ability to access files.. so you need a file app.. there are plenty of them available.. filebrowser is one. What application you use to view files will depend on the format of the files.. google for that.
The TC has no media server ability whatsoever.. it is a dumb as a board hard disk in a router. And should be treated as such.. especially to remember they die.. rather badly and suddenly.. and are difficult to backup should they do so.. it is design as a backup target for TM.. but TM cannot backup a TC or any other network drive.

Is Time Capsule vulnarable with Upnp aka Port Mapping vulnerability?

Similar Messages

Maybe you are looking for