Is Transport System b/w diff clients like 100 development 200 QA Possible?

Is it possible that we configure stms b/w diff clients like 100 is Dev, 200 is QA, 300 Prod and data flows through them as I have heard that this can be done

Hi Kiran,
Login to 000 client with SAP* user for the following configuration in the Transport Management System, STMS---go to Overview click on the Transport route, Your TMS configuration will be display in the  window .
click on Pencil Icon or Press F5 to switch to Configuration editing mode, Click on Edit menu then click on the Transport Target Group to define the multiple client of single or multiple system which exists in your landscape.
Choose Hierarchical list Editor Mode or Graphic mode, to change from graphic mode to Hierarchical, go to setting menu click on transport route editor and select the Hierarchical List Editor Mode, setting will take effect to go to back and click on transport route again.
Switch Editing mode before continue to define the consolidate route,then go to Edit Menu, Transport Route and click on Create, Transport route window will display with the Consolidate & Deliver route options. Select the Consolidate Route and click on Extended Transport Control or F6.
Integration system is your current or development system as source system
Transport Layer Enter the default layer which has been created with your integration system.
Consolidation Targe Select your target group which was created.
Save the Configuration, activate and distribute the configuration across all systems.
system is ready to transport the requests to multiple systems and multiple clients
Cheers,
Shaym
Message was edited by:
        shyam thamadapalli

Similar Messages

  • Right now i have an ipod 4, and i was wondering if i could trade it in and get the 5. I dont mean to just swap, but to get like 100 or 200 dollars off the 5th gen...

    Right now i have an ipod 4, and i was wondering if i could trade it in and get the 5. I dont mean to just swap, but to get like 100 or 200 dollars off the 5th gen...

    No.
    Apple will only give you a 10% recycling discount if you turn in an old iPod when you purchase a new one.
    Apple - Recycling Program for iPod and Mobile Phones

  • Is it possible to transport requests to 2 QA clients with ChaRM?

    Hi
    If there are 2 QA clients and requests need to be tranported to both clients at the same time,
    can SolMan ChaRM handle this?
    Transport route is as follows.  
    DEV_______QA_______PRD
    200___->__300___->_100
    ______--->__500
    Anybody has experience?  
    My version is SolMan 7.0 SP16
    Thank you

    hello,
    I have the same behaviour in my landscape. Only the systems in the main path is available in SDHF task list
    I would say this is normal.
    Why is this normal ?
    Because the ur.gent correction is to be considered like an emergency process that doesn't superseed the normal maintenance but that complement it to have a faster change in place.
    That means the ur.gent transport will follow the normal maintance process anyway
    If you miss the ur.gent transport in the other QA client you may schedule the following task in your project tasklist
    /TMWFLOW/SCMA_BTCH_SYNC_TEST or online
    /TMWFLOW/SCMA_TRIMP_SYNC_TEST
    This is not obvious how this is working and I am currently evaluating this solution in another thread
    [Is it possible to transport requests to 2 QA clients with ChaRM?|Is it possible to transport requests to 2 QA clients with ChaRM?]
    on your side you may also want to evaluate this tasks ?
    br
    Xavier

  • System Landscape using multiple clients scenario for BW

    Hi Friends,
    I have a scenario where I want to use multiple BW clients based on single server.
    I have made client copy of the development server and want to transport the objects
    to the target clients.
    I am aware that such a scenario works fine in R/3 and infact i have used it
    .But in BW when i hit RSA1 I  get an error message "you can only use client(010)"-my development client of which copy was made.
    The client copy system is 102.
    Now I read a thread on sdn which said change client entry in RSADMINA table .I changed it ,but I think its cross client table and hence RSA1 is neither workinging in client copy or the parent system.I reverted back entry in client 102 and saw that development client working again fine like before.(also RSADMINA) value changed in 010.
    I have tried to fix it by creating appropriate mappings using SCC4/BD54/SALE/WE20/RZ10
    .Also created mapping WE20 for Partner profile and assigned the logica system.
    Is it possible to have such a system landscape?
    Can anyone give some useful suggestions?

    Hi..thanks to all of you....
    I think this thing boils down to table RSADMINA where you maintain entry for your client.
    The primary key there is 'Customizing ID' and when you specify there "BW" .You can't make another entry for another MANDT with another customizing id.
    Whenever u login to any other client and you change entry of MANDT it is going to be reflected to all the clients and thats what is the issue.So you can't mantain mulitple entries as you can't enter two customizing ids. there.
    Infact there are many reasons in the background as well which the sap note mentions like common number ranges..etc.
    Lastly ..Ofcourse as Siggi said you can have another R/3 or CRM system etc on the same server but no two BW clients.I think SAP should not allow client copy for BW on the same server..it will help some bad efforts
    Thanks for the support everyone.
    Regards,
    Rakesh
    Edited by: Rakesh Kumar on Jun 15, 2009 12:08 PM

  • How to copy system table from one client to another client

    Hi,
    Currently i am implementing recruitment module in one of the power sector company. I have finished all the configuration in one of the client in development server. I have trasported all the request in Qulaity server so that i can do the testing. When i am running TCode : PBA7 (Direct Data Transfer) i am getting a runtime error with error analysis -
    A SELECT, UPDATE, or DELETE statement contains the invalid table
    name "PB0021".
    I have checked this system table in this client (Quality Server) but this table is not available, but at the same time this table is available in Devepment server client where i can run this transaction.
    Requiring your help on this to resolve this issue. Do i need to copy this system table PB0021 from Development server client to Quality server client? If so then how to do this activity?
    Thanks in advance....
    Regards,
    Milind

    Hi Milind,
    Goto SE01.
    Create a workbench request manually.
    Add the following entry.
    R3TR TABL PB0021.
    Transport the request to quality system.
    Hope this works.
    Best wishes,
    Dilek

  • Offline transport of transport requests to file on Client-PC and re-import

    Hi all,
    for maintenance reasons, we copied a BW system in a Virtual Machine (VM) and made some BI-IP developments there (new InfoObjects, InfoAreas, DSOs, Cubes, MultiCubes, aggregation levels, filters, planning functions, queries etc.). The VM is "offline" with no transport system in place so far (all BW objects should have been saved to $TEMP). Thus, we cannot use SAP standard nor BW transport systems due to offline environment.
    Now we set up a new BW server we want to "copy" our developments from the VM to.
    What we are looking for:
    (1)how can we export transport requests to a file on a client PC (VM) and then re-import the file on the other physical server again to further use our previous developments (no source systems in use)?
    (2) any other best practice approach to that scenario
    I already found an entry in another thread, which covers a similar issue but does not fully meet my requirements in my point of view: http://it.toolbox.com/wiki/index.php/Upload_and_download_SAP_transport_request .
    Would be great if anyone has a solution to that scenario. If you need further details for clarification, please let me know.
    Thanks in advance.
    Stefan.

    Other solution found

  • Manually delete Transport system - Sandbox system

    Hi All
    I am have a problem with our transport system on or sandbox system and basically what I want to do it get rid of it and set it up locally.
    As our system is a copy of our PRD it still has all the old config, what I would like to do is remove it in the database. Does any one know how to do this?
    It is a bit of a 'fudge' but seems the easiest way to do it.
    Many Thanks in advance
    Phil

    hello,
    Just delete (if necessary) the STMS configuration and describe your transport planning so that we can help you.
    Manoj

  • Doing GR for a material type, system should give a message like QI required

    Dear Friends
    While doing MIGO(GR) for a material type, system should give a message like Quality Inspection required
    but Client requirement is not to maintain QM view or Inspection Type 01for  material type
    Any setting required 
    Thanks & Regards
    Gajendranath

    Hi
    Please check user exit QBCK0003 |Extended QM check for goods receipt                        
    Regards
    sujit

  • No administration authorization in Change and Transport System in CHARM

    Hi guys,
    I am currently working for CHARM implementation for ECC 6.0
    now my problem i created an urgent correction  and i released the transport request successfully, but when i try to execute the Pass correction test action it is saying that No import into test system has taken place yet. then i went to task plan and checked there in quality system it is saying No administration authorization in Change and Transport System.
    So i asked my basis team to assign the S_TMW_IMPORT profile to user TSADM in 000 client of quality system and additinally our basis team has assigned S_CTS_ADMI. authorization object to TSADM user ID in 000 client of quality system. But SAP has suggested to assign S_CTS_IMPALL and S_CTS_IMPSGL authorization profile to S_CTS_ADMI.
    But the problem is S_CTS_IMPALL  and S_CTS_IMPSGL authorization profile is not available in 000 client of quality system.
    Kindly give your valuable inputs as early as possible. the solution provided by anybody will be rewarded with points.
    Thanks&Regards
    Raju

    can you try assigning the below profiles to that ID.
    S_TMW_OPERA     
    Operator in CTS (All Transport Authorizations)
    S_CTS_ALL     
    Transport system: All authorizations
    S_CTS_DEVELO     
    WBO: Profile for developers in P systems (incl. tasks)
    I too have checked and i did not come across the profiles nor objects S_CTS_IMPALL and S_CTS_IMPSGL .
    Where did u get the message that they have to be imported ?
    Hope it helps.
    Award points for the replies that are helpful to you.
    Rgds,
    Sri

  • Transport system BADIs

    Hello, ladies and gentlemen,
    I have a question regarding the BADIs in the transport system. I would like to implement the code inspector check of the transport request with some additional features. I know there is the BADI called CTS_REQUEST_CHECK. This one is launched before the standard code inspector integration into the transport system. That means that at the moment when it is executed, I have no idea what will be the users reaction to the "situation".
    Can anbody suggest how to reuse the interaction between the system and the user when releasing the request, but still integrate the code inspector there? One of the options would be to have a BADI which is called AFTER the transport with SCI warnings was released.
    Any ideas welcome:))
    Thanks Otto

    Thanks gentlemen,
    but I see no news for me. I named one of the BADIs in my original post, I also researched the SE18 entries, I found all this information already. My question is whether there us way how to trick the system (or find another spot) so I can process stuff AFTER the release. I am interested in the state when there were SCI messages but the admin decided to "release anyway". When I only have a BADI which is called before the standard procedure I can`t access the information "what really happens". That means that I either have to dig out all the standard functionality and reuse it in my custom code (and then turn off the standard solution) or let the standard to do the job and process the information after everything happens.
    Thanks for your time and effort anyway,
    cheers Otto

  • Need to delete Transport system , which is not domain controller

    I need to delete transport system on machine which is not domain controller .
    our domain controller system is not avalible now .
    how can i delete the transport system on my machine as domain controller system is not avaliable .
    Please let me know what can i do ??
    Thanks,
    Asc

    Hi,
    Logon to any system which is in your transport path in client 000. Then in stms, go to Overview ---> Systems. Here you can find all the systems in your transport path. You can also find the domain controller which you have configured as before.
    Now, goto Extras----> Delete TMS Configuration.
    After deleting, logon to system which you want to make as domain controller in client 000. when you execute stms, now it will ask for new stms setup, which you might be aware of.
    If you need more guidance, let me know.
    Thanks,
    Sailesh K

  • Is possible leave  a object type (MIME Repository) of the transport system?

    Hi,
    We'd like use the MIME Repository for storing pictures of our SAP CCM Catalog.
    When we import a new MIME object a order is created. It is possible to avoid this. I mean I'd like to know if we can do this.
    - In a prductive system (closed)
    - Configure an object type to leave the transport system
    Any idea about this?
    Thanks for your attention
    Regards
    Jorge

    Hi
    Your program works fine you need only to write all DEFINITION and then all IMPLEMENTATION:
    *       CLASS one DEFINITION
    CLASS ONE DEFINITION.
      PUBLIC SECTION.
        METHODS: ADDIT IMPORTING ADD_NUM1 TYPE ANY
                                 ADD_NUM2 TYPE ANY
                       EXPORTING ADD_SUM TYPE ANY.
    ENDCLASS.
    *       CLASS two DEFINITION
    CLASS TWO DEFINITION INHERITING FROM ONE.
      PUBLIC SECTION.
        METHODS: OUT IMPORTING OUT_NUM1 TYPE ANY
                               OUT_NUM2 TYPE ANY
                               OUT_SUM TYPE ANY.
    ENDCLASS.
    *       CLASS one IMPLEMENTATION
    CLASS ONE IMPLEMENTATION.
      METHOD ADDIT.
        ADD_SUM = ADD_NUM1 + ADD_NUM2.
      ENDMETHOD.
    ENDCLASS.
    *       CLASS two IMPLEMENTATION
    CLASS TWO IMPLEMENTATION.
      METHOD OUT.
        WRITE: / 'Sum of', OUT_NUM1, 'and', OUT_NUM2, 'is', OUT_SUM.
      ENDMETHOD.
    ENDCLASS.
    DATA O_ONE TYPE REF TO ONE.
    DATA O_TWO TYPE REF TO TWO.
    DATA: NUM1 TYPE I,
          NUM2 TYPE I,
          SUM  TYPE I.
    START-OF-SELECTION.
      CREATE OBJECT: O_ONE, O_TWO.
      NUM1 = 2. NUM2 = 4.
    *when is called is used EXPORTING
      CALL METHOD O_ONE->ADDIT
        EXPORTING
            ADD_NUM1 = NUM1
            ADD_NUM2 = NUM2
         IMPORTING
            ADD_SUM = SUM.
    *PERFORM addit USING num1 num2 CHANGING sum.
      CALL METHOD O_TWO->OUT
        EXPORTING
           OUT_NUM1 = NUM1
           OUT_NUM2 = NUM2
           OUT_SUM = SUM.
      NUM1 = 7. NUM2 = 11.
      CALL METHOD O_ONE->ADDIT
         EXPORTING
           ADD_NUM1 = NUM1
           ADD_NUM2 = NUM2
      IMPORTING
           ADD_SUM = SUM.
    *PERFORM addit USING num1 num2 CHANGING sum.
      CALL METHOD O_TWO->OUT
        EXPORTING
          OUT_NUM1 = NUM1
          OUT_NUM2 = NUM2
          OUT_SUM  = SUM.
    Max

  • Activating  the standard transport system in BI Dev system.

    Hello All,
                    We have a debate going on like whether we need to activate the standard transport system or not in BW Development.
    Our user is asking  to enable some functionality from a Web Template using the
    Save As command. This command enables a user to slice  a report and
    then save this view as a Portal Favorite. This functionality appears to be
    blocked when the transport system is active(Switched on) but  he is able to save it when transport system is switched off.
    I know that it has to be switched on in order to collect the changes in transport requests in Dev other wise will be collected as Local obects in $TMP. 
    Also let me know the pros and crons of activating the transport system.
    Appreciate if you could throw some light on this and solution to the above problem.
    Regards,
    Hari

    Hi,
    It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
    If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
    My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
    Thanks,
    Swapna Priya.

  • Need java plugin for thin client like HP compaq t 5000

    Hello everybody,
    I need to know if there any java plugin for Internet Explorer on windows CE.net on a thin clinet like HP compaq t5000, my problem is that i have an oracle form that access to oracle databse, on the client i have thin client HP compaq t5000, oracle support told me to post my problem in java forums since there's no jinitiator support for windows ce.net, as the oracle forms is based on java applet, so it could be a solution if i can find a java plugin for windows ce.net on my thin client like that i can see the oracle form.........................
    please can anyone help me with a link where i can download a java plugin for windows ce.net and how to install it on such operating system...................
    Thank you in advance

    hello again, thank you for ur response, but please can u help me with how i can install the Creme jvm that support applets on the hp compaq t5000 under windows ce.net, because actually i don't have any idea on how we install software on such machine, coz it seems the isntallation on them it different than the normal windows xp...... i download the demo creme jvm zip file and i 'm not able to install it, if it is possible can u provide me with step by step instruction, just need to test my application on the demo version first, thank u in advance.....

  • Best configuration for Transport System

    Hi everyone
    I like to know what is the best way to configure my transport system.
    We have 2 server QAS and PRD in two distinct machines. SERVERQAS and SERVERPRD, accessible from network.
    We need what when all transport request from QAS when released, all files must be copied to PRD server, today we need to use the button to adjust queue, but we can't use this option, we need what this process is automatic.
    Thks.

    Hello Emerson,
    You don't have Development system?
    In a standard 3 system landscape, if dev, qua and prod systems are assigned with single domain controller and sharing same /usr/sap/trans then as soon as request is released from dev system, that will be available in qua buffer/import queue. Once it's successfully imported into qua system then it will be available in prod buffer/import queue for import. This is controlled by transport route.
    Please read TMS configuration guide and take necessary actions.
    http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
    Thanks,
    Siva Kumar

Maybe you are looking for