Is transportation possible...
Hi all,
Can we transport a request in BW 3.5 on AIX/DB2 to Linux/Oracle system?
Pls let us know the feasibilities...
Thanks all,
Praveen
Hi Praveen,
Transportation is possible; here go through these links to get an idea. But you have to take help of Basis people to do this...
https://forums.sdn.sap.com/click.jspa?searchID=5899562&messageID=3119920
https://forums.sdn.sap.com/click.jspa?searchID=5899562&messageID=3127187
https://forums.sdn.sap.com/click.jspa?searchID=5899562&messageID=2485994
https://forums.sdn.sap.com/click.jspa?searchID=5899562&messageID=3320160
https://forums.sdn.sap.com/click.jspa?searchID=5899562&messageID=3135978
https://forums.sdn.sap.com/click.jspa?searchID=5899562&messageID=3299165
Hope this helps...
Regards,
Habeeb
Assign points if helpful...
Similar Messages
-
Is Message debatching in OSB using JMS transport possible
hi
I have message on JMS queue with multiple message(s) in it.
Now my requirement is to read this JMS message as multiple internal message(s) from queue using OSB JMS transport.
Is this possible from OSB JMS transport?
Thanks in advance.
-Ramakrishna GillaNo.. JMS transport wont automatically do it for you .. You will have to write a jms proxy service and have your logic to do the debatching.. alternatively you can use jms proxy as a pass thru service writing to the file system and then have the JCA file adapter to do the debatching..
-
Cancal of Transport possible?
Hi all,
at first I just want to thank you for all the great postings on sdn.sap.com. I read a lot of them. Now I have a problem and I am not able to find an answer in any of the postings.
My problems refers to the transport system in sap. Can I cancel a transport from an external System? We have a Systemcopy for testing update-possibility (U-Sys). There we developed some roles. While developing these roles were changed on the other System (D-Sys). Afterwards they were transported from the U-Sys to the D-Sys.
The changes in D got lost, because they were never transported to T neither P. Is there a possibility to cancel this transport on D?
I hope you can help me.
BenediktHi Benedikt and welcome to the SDN!
unfortunately there is no possibility to 'rollback' a successful imported transport. For dictionary objects (e.g. abaps) there is a possibility to get a previous version back from the version management but I believe this isn't possible for roles. A possibility might be to check the change documents and redo the changes. If available you might also restore a backup.
regards
Siggi -
Hello,
i wondered if anyone has already tried to transport Web Pages that were created with WPC?
I tried it today and used the KM Transport functionality.
Transport was successful and no errors were mentioned.
But none of my pages work. No content is displayed.
I will try to find the error now. Let me know if you managed to do the transport and what problems occured and how you solved them.
Regards,
MarcusMarcus -
I, too, have been able to transport everything except for pages.
According to Note 1079797:
Sites, web pages and compound web documents cannot be transported from one portal to another.
Comment: The transport of sites is planned to be released in an upcoming support package.
I have not noticed a problem transporting the actual site, but Pages yes. -
Is Vehicle Space Determination in SAP Transportation Possible?
Hi All,
I have a customer requirement here where customer would like to determine the vehicle space before loading the goods into the truck. I know that there is a module which is vehicle space optimization under the logistics exceution module but that is not in the basic SAP ERP. Is there any way SAP Transportation is able to cater for it or with some customization involved.
Appreciate your inputs in this matter.
Thank you!Hi,
Under DSD / MDSD (Direct store delivery/Mobile Direct store delivery ) there is a concept of VSO (Vehicle space optimization) generally used by beverage industry,But the VSO tool is external not provided by SAP.
Regards,
Siraj -
Is transport possible w/o implementing Solman Charm
Is transport in satellite system can be managed by solman w/o implementing Solman Charm? If so then how..it can be activated. Thanks in advance for your help.
Hello Dhananjay,
Are you refering to TMS, started with transaction STMS?
That is actually Basis.
However what you might be looking for is CTS+ (Change and Transport System) that can be intergrated with ChaRM, but doesn't need to be.
HEre is a link to best practices for implementing CTS+: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58?quicklink=index&overridelayout=true
And here is a link to configuring CTS+ in Solution Manager : /people/dolores.correa/blog/2009/06/05/cts-configuration-in-solution-manager-70-ehp1
Hope this helps you out.
Regards,
Paul -
Is transportation from lower version to higher version is possible
hi all,
WE have BI 7.0 as our development system. we are setting up test servers now. now team wants the test server to be upgraded to BW 7.01. for which i would have to apply enhacement package1. now my question is:
Is transport possible from BW 7.0 to 7.01?will there be any issue with the objects developed in Netweaver 7.0 getting transported in Netweaver 7.01.
Also can you suggest me any links or documents which tells the steps to apply Enhacement package.
Regards,
PriyaHi Priya,
It may be technically possible but is not supported and is extremely dangerous.
The reason is that you are importing objects between two systems but the state of those objects may be slightly or hugely different depending on the difference in support pack level between the two systems. Even if they are only at slightly different levels, you would have to be absolutly sure that the objects you are transporting have not changed in the support package levels that are different. not only this but to be sure that no negative consequences could occur, you would also have to be sure that no objects that interact with those being transported, have been changed.
For these reasons it is just not worth the gamble since if an issue DID occur during or after transport, you would most likely have to restore from backup to ensure consistency. Its far better to only transport betwwen systems that are on equivalent support package levels.
Regards,
Paul -
DYNPRO_SENT_IN_BACKGROUND Error while transporting XI data source
Hi Experts,
We are having an issue in in transporting XI data source in BI from Dev to Test. The error is geenrated during post handling of the transport, possibly while the data source is bing activated. Teh ST22 dump gives the DYNPRO_SEND_IN_BACKGROUND error. Following informaiton is available in the User Information section of ST22 dump.
Call Program........."CL_RSDS_WEBSERVICE============CP"
Function Module..... "RSDS_WS_WEBS_GENERATE"
Information on where terminated
Termination occurred in the ABAP program "SAPLSTRD" - in "SYSTEM-EXIT".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 0
of the (Include) program " ".
Please give us your advice on how to nail down this issue.Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S -
Transport between different releases
Hi,
Is it possible to have transports between two server with different releases,
one is on 701 and other is on 700,
pls advise.
ThanksHello Irfan,
Transport of customizing between diffeent releases is NOT supported. Also generated objects, which were generated by customizing, should NOT be transported between different releases.
SAP objects may NOT be transported between different releases (e.g. a table in an old release could have less fields than in the newer release and thus such a transport might delete data or if an abap calls a function module and in new release have one parameter more,then you get syntax errors if you transport only one of them from a system with the old release, ...).
So data loss and severe inconsistencies can happen if you transport SAP objects between different releases, or between systems with same release but different support package level or between systems with different addons or different add-on versions etc.
For pure customer objects (e.g. Z-tables, Z-programs, Y-tables, y-programs or objects in customer name space) it might be ok to transport them. But if e.g. your Z-table uses an SAP data element which has maybe been changed in the new release or does maybe no more exist, you can also get problems during transport of your z-table.
Data loss and severe inconsistencies can happen if you transport SAP objects between different releases, or between systems with same release but different support package level or between systems with different addons or different add-on versions etc.
Please check the following:
1090842 Composite note: Transport across several releases
1089083 Transports between Basis Releases 7.0* and 7.1*
556734 FAQ Transport: Setup and further information
Pay attention to point 5 and 6.
5. Are transports possible between systems with different Support Package versions?
6. Are transports possible between different R/3 releases?
Best Regards
Niraj -
CHaRM-Is that possible to create multiple Transport Request in UC
HI Gurus,
Quick question on ur.gent correction using Solution Manager CHaRM in EHP1. Is it possible to create multiple transport request(TR) for single ur.gent correction (UC). DO NOT confuse with transport task.
For example, after I created transport request and developer start working and release the task, realised to add another transport request for same UC. When I tried, it did not create any TR but checked the message found that
Schedule Manager: Monitor
Job Status: Processing completed, but with warnings
Program Name: /TMWFLOW/SCMA_TRORDER_CREATE
Action to be checked: Ur.gent Correction: Create Transport Request
There is already an open request, XXXXXXXXXX, for this project
So only way I can do that I released the TR and able to create another TR.
May be wondering why I need to create another TR, why not create TASK and work on that.
But this is the requirement at our company.
I will appreciate the effort and time to provide me the solution of this.
Thanks
AvaHi Ragu,
That's really quick turn around. Unfortunately not able to found whatever you mentioned in your message. Here is detail,
I navigate to Actions - Depending on Status, found the entry as
Trans. Type StatProf UserStatus Seq Action in SAP Change Manager
SDHF SDHFHEAD E0002 10 CREATE_HF
SDHF SDHFHEAD E0002 20 CREATE_REQ
SDHF SDHFHEAD E0002 30 SAVE_PARTNER
SDHF SDHFHEAD E0002 40 SET BO LINKS
Where SDHF - Ur.gent Correction
E0002 - In Development
CREATE_HF - Create an Instance in SAP Change Manager
CREATE_REQ - Create Transport Request with Task
SAVE_PARTNER - Save Partners in Respective Partner Roles
SET BO LINKS - Sets Links to Business Objects
I don't see any OPEN_TR.
Any other place need to make change.
Thanks
Ava -
hello, i created 5 different books (photo album) and i would like to know if it's possible to make one single order (and pay the transportation fees only once...) i couldn't find how
Soory, no, it is not possible. You can only combine multiple copies of the same book into one order.
Regards
Léonie -
Is it possible to do portal content transports through System landscape?
Hello,
In order to transport content from portal A to portal B I am currently using transport packages: export the content from portal A, download it to the local PC and import it to portal B. The process is working OK but I still have a question:
SAP are transferring all the control on their systems to the System landscape, for example Java developments. My question is if it is also possible to make these transports through the system landscape so no local PCs are involved in the process?Hi Roy,
You are right in the point that development projects can be transported, using the NWDI, centrally managed through the system landscape.
Nevertheless, the PCD transports (EPA) have to be touched manually anyhow. Theoretically, you can set up an SDA and put an EPA into it, see http://help.sap.com/saphelp_nw04/helpdata/en/a3/782240da03e569e10000000a155106/frameset.htm for details.
But this only really makes sense if you want to transport your own application together with the portal configuration (iViews representing your application...).
So in the end, PCD transports are designated to be transported as you are used to - manually via the export / import function of the portal.
Hope it helps
Detlev -
Is it possible to remove 2010 Hub Transport entirely in an Exchange 2013 environment?
I'm using Exchange 2010 Edge Transport in our organization that I've recently upgraded to Exchange 2013. I like Edge Transport - along with our spam filter it is an effective and simple way to send and receive external e-mail - and I don't want
to get rid of it. But it seems like it needs a 2010 Hub Transport server to interact with.
Right now the only other Exchange 2010 Server I have left running in the organization is the one Hub Transport server that interacts with the Edge Server. Is there a way to undeploy this server too and connect the Edge Server directly to one of the
2013 Mailbox Servers? Or will this need to stay as part of the organization as a pair with Edge Transport?
I noticed mail flow was running just fine while the Hub Transport server was turned off. So it seems like it's possible. But I want to be able to undeploy it safely without hurting mail flow. Are there any links or white papers that show
how best do do this?
----------- Ron E Biggs Chief Tech Officer Entertainment StudiosBefore you remove your HUB servers, make sure you re-subscribe the Edge server using the below steps:
On Edge Server:
New-EdgeSubscription -FileName "C:\EdgeSubscription.xml"
copy the file to one of the mailbox servers, and run:
New-EdgeSubscription -FileData ([byte[]]$(Get-Content -Path "C:\EdgeSubscription.xml " -Encoding Byte -ReadCount 0)) -Site
"ADSITENAME"
once completed, most of the tasks to manage/test your Edge sync will be via PowerShell, please see the below link for more details:
http://technet.microsoft.com/en-us/library/aa996865(v=exchg.150).aspx
Mohammad Saeed | MCSE 2003 | MCTS: Lync, OCS, Exchange This posting is provided "AS IS" with no warranties, and confers no rights -
Is it possible to transport objects from 4.6C to ECC6?
Hello,
Apologies if I am posting this in the wrong forum. I have developed some custom z-tables and an application in ABAP / Screen Painter on a 4.6C server. Is it possible to transport these to an ECC6 system? Otherwise I will have to recreate everything on the ECC6 server. Help is appreciated, thanks.
RegardsHi,
Yes it is possible, Please login into target system(ECC6) get data and cofiles from source system (4.6c) using ftp method then import the transport objects using tp addtobuffer and tp import with the help of below example.
Ex:
tp addtobuffer transportname SID pf=\usr\sap\trans\bin\PROFILE_NAME
tp import transportname SID client=nnn U16 pf=\usr\sap\trans\bin\PROFILE_NAME
With Regards,
Krishna. -
Is it possible to transport Reference Operation Sets?
Hallo,
I want to transport Reference Operation Sets from the productive to the consolidation system. Later on I want to transport the Sets back to the productive system.
Is this possible with a transport request or is their any other possibility?
Thx in advance!Markus Meier ,
To my knowledge there was a 3rd party tool named Infoshuttle which is add-on to SAP, if you have that in your system then it is possible to transfer transaction data from Production to Non-Production system. It can also transfer from Non-Production system to production system though this is NOT recommended at all as it could create data inconsistency.
[Information on Infoshuttle|http://www.erpgenie.com/products/infoshuttle.htm]
Hope this helps....
Regards,
Prasobh
Maybe you are looking for
-
HOw insist that I can use it in a different country when Apple says it's locked?!
-
My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?
-
.MOD files in Premiere CS5
I am trying to import .MOD files into Premiere CS5, with no joy. If I change the file extension to .MPG, Premiere can import the video, but no audio. Can anyone advise on how I can import .MOD files successfully, with both video and audio? Many thank
-
Does the screen turn black during an Apple Hardware Test?
My iMac screen has started turning black randomly. I searched the forums for advice about what to do an have tried 1. Unplugging everything and rebooting after waiting a while. 2. Resetting PRam (3 times.) 3. Running AHT. The last test is running at
-
Application generated warning messages
I seem to be constantly vexed by integrating warning messages into my applications. I am fine with javascript and am a former PHP (LAMP) developer so I think I just have to get the proper architecture for warning messages through my head and them I w