IS-U Schema and rates steps configuration Guide
Dear Gurus,
I am new in IS-U I will be very thankful to you guys if any one can give a confiiguration guide regarding the schemas. I am very muck lost in Rates Steps.
Thank you for your Help.
Regards
Saeed
Moderator note - thread locked. No research done. Links to help.sap.com and service marketplace already provide basic information.
Good Day Subrat,
Step 1:
Create Framework Id( assign hidden & visible components)
Step 2: Create CIC profile
Step 3: create Org unit and assign person
Step 4: Assign CIC profile to Org. unit (or) person
Path : Easy access screen
Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
In this screen on the top i.e menu bar find Go To
Go To>detail Object>Enchanced object description
Now u r in Maintain object page(T code-PP01)
Now in the Active tab page select CIC profile
Now in menu bar Edit>create infotype
Again u r in new page(T code-PP01)
Enter the CIC profile Id which u have created in customizing
Run T code- CIC0
I hope u r able to see the screen now
Reward Points if it helps
Regards,
Shiva
Similar Messages
-
Cisco LMS 3.0 step by step configuration guide
Hi all,
Can any body give me cisco LMS 3.0 step by step configuration guide. that is great help for me.
Thanks
AfzalLMS 3.0 is a very old version. You can refer to the product documentation here to start. The "Installing and Getting Started Guide" there should be useful.
You may want to take a look at this guide for LMS 4.1. Some of the terms are updated to reflect the application's changes over the past couple of years but the concepts are applicable. -
Urgent: Step by step configuration guide for workflow
Hi all,
Can anybody please proVide me complete step by step configuration guide for SRM 5.0 workflow.FULL POINTS WILL BE AWARDED FOR THE HELPFUL ANSWER..hi,
<b>Check the below PDF file on Workflow:</b>
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
There is a good book from SAP Press that I would
recommend as a starting point.It's called Practical Workflow for SAP and it is by Alan Rickayzen.
http://www.sap-press.com/product.cfm?account=&product=H950
/people/ginger.gatling/blog/2005/12/01/link-workflow-business-objects-to-your-collaboration-tasks
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
http://help.sap.com/saphelp_bw33/helpdata/en/92/bc26a6ec2b11d2b4b5006094b9ea0d/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/8d/25f94b454311d189430000e829fbbd/content.htm
Go through the following:
1) Goto Tcode PFTC : Standard Task > Create Button>Workflow Templete
For Create Container
Element : ZBUS1001006
Name : ANy Name
Description
Data Type & Properties
Data Type:
select Object Type : BOR Object Type for BUS1001006
Properties:
Parameter Settingd : check all Import, Export & Mandatory Checkboxes
Basic Data :
Abbr : Create_View
Name : Some Name
Work Item Text : Create View Material & -
Click on DELE Button & Select Material From The List
Object Catagory : BOR Object Type
Object Type : BUS1001006
Method : View
Triggering Events
Obj Catagory Object Type Event
BOR Object BUS1001006 View
activate it
Enter on BUS1001006 Object Type you will get Quadratel<> Button after that
double click on Quadratel<> button you get green button
after that the system will generate the task No.
check in the Event linkage Tcode : SWETYPV
if you find an entry with your Workflow and linkage active
goto Tcode : SWEC click on New Entries
Change Doc Obje Obj Cat Obj Type Event on create
Material BOJ Obje BUS1001006 View Option Button(Checked)
save this
goto Tcode : SWEC
Change Doc Object : Material
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Check with On Create Button
Goto SWETYPV
Obj Catagoty : BOR Type
Obj Type : BUS1001006
Event : View
Receiver Type : Some Work Flow No: WS80000431 like this
Click on Work flow Builder
Cheers
Alfred -
Step configuration guide for Shipping, Transportation & Shipment Cost Calcu
Hi Gurus,
Does anybody have the step by step configuration guide for Shipping, Transportation & Shipment Cost Calculation.Its very urgent.
My email id is [email protected]
Thanks in advance
Regards
Message was edited by:
Sumit Rayaguru<b>Hi
Pls don't post e mail id to share information . Make small search n sdn before posting the query.</b>
Help Me!!!!!!!!!!!!
Help Me!!!!!!!!!!!!
Please Follow below steps.
1)Create the transportation planning point for the company codes.
2) Maintain transp. relevance for the dly doc. type, item cat and routes
3) Define the shipment types
4) Define the shipment cost types
5) Define shipment cost item categories and assign
6) Define shipment cost relevance
7) Maintain pricing
8) Assign purchasing data
9) OBYC
10) OKB9
AND Please check the below:
Step1: T.Code: VL01N: Just Create Delivery Note here. Do not do the Picking and Packing.
(This is Client Specific)
Step 2: T.Code: VT01N: Create Shipment.
Here mention your Transportation Point and Shipment Type you Configured for this and Click on deliveries ICON.
GO to W.ref to
Outbound Delivery : Give your Delivery Number that you created earlier for this shipment and F8( Excute)
Then Select the Delivery and Click on OverView
Here Click on Planning then automatically Route( If route determination is done) and Vendor Number get generated and Save the Data.
Step.3: T.Code: VL02N: Change Delivery.Here give the Delivery no and
Do picking, Packing (If necessary) and PGI.
Message was edited by:
SHESAGIRI.G -
Reg.ECC 6 MM step by step configuration guide
Dear Experts
I am in need of ECC 6 MM step by step configuration guide.Kindly provide me. thanks in advance..Installation ECC 6 over and waiting for configuration guide
Pls help urgently...
Thanks
Rajakumar.Kwww.sap-img.com/sap-mm.htm
www.flipkart.com/search-books/freesapmmfunctionalityandtechnicalconfigurationmartinmurray+download
www.certbible.org/sap-presssap-mm-funtionality-and-technical-configuration-scan/
Please Read the Rules Use the Search -
Treasury and risk Managament Configuration Guide
Hi Friends,
Can you please provide me the treasury and risk management config guide for the following :-
a. Foreign exchange forward cover
b. MTM Report Config
c. Financial Postings for the foward cover.
d. Swapping of forward cover.
Is treasury part of financial supply chain management, also let me know whether it is a SAP license product or part of normal standard product.
Please forward me the same to [email protected]
Thanks in advance.
DeepakHi deepak,
Check out these links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIARCR/FIARCR.pdf
Assign points if useful
Regards
genie -
WM Business Blue Print & Configuration Guide
HI Gurus
I am SD consultant, Could anybody provide me the Business blue print for SAP Warehouse Managment.
And Step by Step configuration guide.
we already had implemented FI,CO, SD, MM, PP, PM
We are a Beverages Company ( Pepsi Cola ).
I have maintained my SDN Business Card.
Regards\AdnanAdnan,
Each BB is different, both in scope and in content, depending on the needs of the client.
I cannot give you any specific examples because each BB is confidential.
SAP offers a BB preparation guide, which explains how to build a Business Blueprint.
http://service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002908402002E
to get you started. Good Luck!
Regards,
DB49 -
Need Cisco ISE Configuration Guide
Dear Friends,
Please send me cisco ISE configuration guide ASAP.
Thanks & Regards,
Rahul WankhadeCheck the following link for Step by step configuration guide it cover all the deployment related to ISE
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html
************Do rate helpful posts********************** -
Reg.Batch management configuration guide
Dear Experts
We want to maintain batch at material level. How to configure in ECC6.00. Pls help me giving the step by step configuration guide. and also AFS configuration guide.
Thanks
Rajakumar.KHi,
Follow the steps:
1.Field---VFDAT and table-MCHA should be created as a charecter in CT04 and assigned to a class in CL02N.
2.create MM01 and add the class to it in classification view.
3.In mm01 plt storage1 view give data for remainning shelf life and total shelf life and in purchasing view activate batch management.
4.OMJ5- activate SLED for your plant and mvt type 201.
5.opj2- set BD for your plant.
6.create sort sequence in cu70 and assign your charecteristic value to it.
7.create batch serch strategy in MBC1 for access sequence(plt/matrl/mvt typ) create a condition record.
8.Do a GR using 501 and enter SLED related details.(production date and exp date values)
Repeat the above step and enter diffrent values for SLED details.
So now two batches are created with SLED as the charecteristic.
9.Do a GI using 201 mvt tye in MB1A and enter * in batch field(system will determine the batch using the SLED value basedon the criteria(ascending or descending which was set in the sort rule.)
(or)
view this thread
Re: Batch Search
Reg,
Deepak -
Step by Step configuration for Shipment cost Calculation
Hi Gurus,
Does anybody have the step by step configuration guide for Shipping, Transportation & Shipment Cost Calculation. I am new to this functionality. My email id [email protected]
Thanks in advance
Regards
MahendraHi MAhendra,
Create Delivery:
T.code: Vl01n
Create TO:
T.code: LT03
Create Shipment Document
Use
After the status of the delivery is open for transportation planning, it is possible to create a shipment document to schedule the transportation.
Logistics  Logistic Execution  Transportation Transportation Planning  Create  Single document
T.code: VT01n
Enter your transportation planning point and shipment type. Press enter.
Creating the shipment cost document
Use
After the deliveries are scheduled by shipment and the shipment is executed, now it is time to maintain and close the shipment document in order to record all relative information and ready for the shipment cost settlement.
Logistics  Logistic Execution  Transportation Shipment cost  Create  Single document
T.code: VI01.
After creation of shipment cost doc. You settle the Shipment cost.
Go to VI02, enter shipment cost no.and press enter.
Then go to Overview -- Fright cost items, Select hte line item and double click it.
Go as main menu: Itme --> Acc. assignment, You enter G/L acc. and cost center to which the transportation cost will be posted.
On the Standard change, details Freight cost items screen, then check the check box Transfer, which means you will transfer the relative transportation cost to FI/CO, in this case, the system should determined which Purchase Order will used to settle the cost, so after you check the Transfer check box.
Press save button on the current screen.
Shipment cost settlement and documents:
Use
After the shipment cost settled in shipment cost document, it has the following affects:
It creates a service entry sheet that refers to the purchase order determined.
It posts acceptance of services performed.
It creates an accounting document for the accruals.
Further subsequent documents are created in FI.
Reward points if it helpful
Regards
Govind. -
Configuration guide [s]
Hi Experts,
does anybody know where i can get step-by-step configuration guides for all areas of MM? I need this for practice purposes.
Thank you, points will be awarded.If you mean Best Practice Building Blocks, these are scenarios or series of processes.
Per Building Block (example: J49 Procurement of Stock material) the following documents exist:
a. Scenario Overview
b. Configuration Guide
c. Development Master List
d. Business Process Procedure
The scenario overview and business process procedure will show the processes / transactions within that scenario.
The configurations steps in the documentation are implemented in the SAP System when the building block is installed. There are prerequisite building blocks. For example, prior to installing J49 - Layer 0 and Layer 1 (J06, J07, J19) should be installed.
If you want to configure it manually: Choose the scenario building block you want to use. List down all prerequisite building blocks and follow the configuration guide (L0, L1 and Scenario BB).
Cheers. -
SAP NETWEAVER step by step configuration
Hi All,
In my organization i need to install SAP NETWEAVER i had that DVD's also please give me step by step configuration guide.
Thanks in advance.
BhargavHi Bhargav,
As installation and configuration of an SAP NetWEaver system heavily depends on your requirements you should start reading the SAP NetWeaver Masterguide. For SAP NetWeaver 7.0 you can find this document at http://service.sap.com/installNW70.
With this link you get also access to all installation material.
For the necessary configuration you should use the SAP Solution Manager (http://service.sap.com/solutionmanager). With the help of this tool you can create a specific configuration guide for your project that contains all relevant configuration steps.
best regards
Carsten -
Configuration guide for BW , Business content
Where can I find a step by step configuration guide for BW specifically for Business contents
I would also like to know what steps are to be done in R/3 also.
If you could give me a link for configuration guide like what we get in Best Practices for R/3 MM or SD, I would be extremely grateful.
I am trying to find it for last 5 days but could not get it.
Pls help..Hi Sandeep
SAP_BW 700 9 SAPKW70009 SAP NetWeaver BI 7.0 -
Hi All,
Can anyone please send me the Step by Step Configuration guide for IPC in CRM 5.0.
My mail [email protected]
Thanks in advance.
DeepakHi Deepak,
It is not recommended to share docs via email. As this will be difficult for others who read the same thread for reference.
Let me try to help.
For IPC 4.0 we have full doc in service.sap.com/crm-inst
but for CRM 5.0 IPC seems do not have such kind of document, this might because totally different structure in CRM 5.0
Maybe you can check a document attached to note 809820, which talks about how to implement the user exit in CRM 5.0 for IPC, maybe this will provide an idea about the necessary configuration needed.
Not so sure whether this could help or not.
Best Regards,
Hongyan -
I’m spending the day catching up on Jabber/IM&P release notes across the server/clients.
So I’m used to EDI and UDS, but we have a new acronym in the Jabber for Mac 9.2(1) Installation and Configuration Guide called BDI and BDS. However they don’t define what BDI stands for other than BDI is LDAP for non-windows
Clients and suggests it should be used for Jabber for Mac.
What is BDI or BDS spelled out? Something directory integration, but what is the B ?
Then to add to the mix they reference BDS which sounds like the old UDS (is UDS changing to BDS?)
How can Jabber get any more confusing…
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future. Manually launching Cisco AnyConnect Secure Mobility Client before making a call. This is going to upset some customers who like how Lync uses https and just works from anywhere with enhanced directory integration…Basic Directory Integration. It's not new, we had it in the Windows clients as far back as CUPC. The distinction got introduced when EDI was introduced, relying on Windows ADSI APIs instead of the client making a native LDAP bind.
To my knowledge BDI/BDS are the same thing; I'm guessing S is 'service'. UDS remains unchanged.
I also noted in the Jabber Video for iPad 9.3.4 release notes that Apple is removing the Always Connect option in the near future.
Well, they lost a patent infringement lawsuit and chose to change the functionality instead of pay the troll. That's not Jabber's fault. Collaboration Edge will be the way to avoid this in the near future.
Please remember to rate helpful responses and identify helpful or correct answers.
Maybe you are looking for
-
How to change default internet access password in Gateway Max (for cable)
Hi All, My home boardband (home bundle with cable) connection has just been installed. I am trying to change the default internet access password. But I can not find out where to set the new password in my Gateway Max configuration page (192.168.0.1)
-
What's the quickest way to update a LabVIEW executable on a FieldPoint module?
I'm developing a complicated LabVIEW 7.0 standalone executable that runs on a FieldPoint FP-2010 module. I believe I'm going through too many steps whenever I change this software; could somebody tell me a faster way to change the code? Here's the in
-
My iPhone 5s isn't being recognized by iTunes or my computer
I have a windows 7 laptop and when I connect my iphone to my laptop it says "Apple Moblie Device USB Driver" in device manager and it doesn't show up in itunes. In device manager it says "this device can't start (code 10)". I have unistalled itunes a
-
Windows 8 Single Language (OEM)
I have purchased windows 8 single language version and which was installed. however I can't update to windows 8.1 single language version. This error message is appearing "Something happened and windows 8.1 couldn't be installed. please try again, er
-
Code of Coders - View Accessors
Hi. My goal is to show some data from static list which is like Code of Coders in another view object. I'm using Code of Coders. This is just one database table for all my coders that exists in my application. This is like in [FOD/Store Front Demo|ht