Is UCCX 8.5(1) compatable with CUCM 8.6

I just checked the Cisco Unified Contact Center Express (Cisco Unified CCX) Software and Hardware Compatibility Guide and CUCM 8.6 is not listed yet.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
CUCM 8.6 addresses quite a few bugs specific to running CUCM on UCS was recommended to me by TAC.
If its not compatible yet, is there a timeframe when the compatibility guide will be updated to reflect CUCM 8.6 ?
Will it be with the upcoming SU2 for UCCX 8.5(1) ?
Thanks

Bvanbenschoten,
CUCM is not listed currently on the internal guides even for SU2. It is possible this may get updated, but it will be a while before we know this. CUCM certification generally lags the release of the product if for no other reason then it is such a quickly released product. If you would like, you can post this question back in about 2 months and hopefully we'll have some news. If I see something before then, I'll certainly let you know too.
Regards,
Robert W. Rogier
CSE -- TAC, UCC

Similar Messages

Compatibility Uccx 9.0(2)SU2 with CUCM 9.1(2)SU3

Have seen the recent discussion on UCCX 9.0(2)SU2 and CUCM 9.1(2)SU2 here:
https://supportforums.cisco.com/discussion/12482146/compatibility-uccx-902su2-cucm-912su2
But with the release of CUCM 9.1(2)SU3 looking at the same compatibility matrix:
http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_9.0(2)_SU2
I do not see that UCCX 9.0(2)SU2 and CUCM 9.1(2)SU3 are compatible. Is this an error in the document or do we need to upgrade UCCX if we upgrade CUCM from 9.1(1) to 9.1(2)SU3?
Thanks,
Ryan

Hi Ryan-
Take a look the posts by Arundeep Nagaraj in this thread: https://supportforums.cisco.com/discussion/12439306/ucm-uccx-compatibiity
Thanks,
DJ

CU MeetingPlace Express 2.1.1.2 Compatibility with CUCM 7.1+

Afternoon all,
According to Cisco's compatibilty matrix, Cisco Unified Meeting Place Express version 2.1.1.2 is only compatbile up to CUCM 7.0.
I understand that CUMPE 2.1.1.2 is coming to end of sale life. However, if it currently works with CUCM 7.0, then surely it will work with later releases of CUCM up to 7.1(3)?
I appreciate Cisco might not support it if there is a problem, but was hoping someone else was running MPE 2.1.1.2 with CUCM 7.1(3b)
Thanks
Jamie

Hi Jamie,
The Compatibility Tool does show support for MPE 2.1.1 with CUCM 7.1 (x)
Cisco Unified Communications Compatibility Tool
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet
Here are 3 groups running this similar combo;
https://supportforums.cisco.com/message/3145002#3145002
https://supportforums.cisco.com/message/1330041#1330041
https://supportforums.cisco.com/message/3150066#3150066
Cheers!
Rob

CIPC 7.0.5 compatibility with CUCM 9.1

Hi
I'm trying to figure out if Cisco IP Communicator 7.0.5.0 is compatible with CUCM 9.1
All i can find is the "Cisco Unified Communications System Release Summary Matrix for IP Telephony" but this matrix is "turned upside down" from my question.
http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html
/Tony

Hi Tony,
It may work with CUCM 9.1 but with some limited functionality as it has not been tested with CUCM 9.1. Please check the release notes of the CIPC 7.0.x version
http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/release/notes/CIPC70_RN.html#wp116331
Highest callmanager version listed is 8.0
Ideally you should be using version 8.6 or higher
http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/8_5/english/release_notes/CIPC_Release_Notes_8_6_chapter_00.html#CIPC_RF_S79BC94C_00
It clearly lists cucm 9.1 as supported cucm version.
HTH
Manish

Unity Connection 8.6 compatibility with CUCM

Hi,
I am upgrading Unity Version 8.0.3 to 8.6, my current CUCM version is 8.0.2. According to following link:
http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html#wp1016708
I will need to upgrade CUCM to 8.6 also, please confirm if this is the case, also can I upgrade to any CUCM 8.6 version available ?
thanks
hasrat

Hi Hasrat,
That doc just refers to the "tested" version but in fact any Unity Connection
version 2.1 or later will work with any CUCM version 4.1(3)or later
So you really don't need to upgrade CUCM at this time if you don't want.
Here's the clip;
Supported Version Combinations for Cisco Unity Connection and Cisco Unified Communications Manager
Cisco Unity Connection 2.x and Later
Any version of Cisco Unity Connection 2.x or later is supported for use with any version of Cisco Unified CM 4.1(3) or later.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan

Is Unity 7.0(2) compatible with CUCM 8.6 ?

Is Unity 7.0(2) compatible with CUCM 8.6 ?
The documentation reports the compatibility with CUCM 8.5(x), but is not updated for 8.6.
Thank you

The documentation related to 8.6 may lag behind for a bit. However, if you are running or update to the latest TSP (8.4.3) on your Unity server then you're likely covered. The version of TSP is really the only compatibility factor as far as Unity/CUCM is concerned.
Hailey
Please rate helpful posts!

CUCM 8x compatibility with UCCX 7x

Quick Question: Is CUCM 8x compatible with UCCX 7x. It does NOT appear so looking at the UCCX compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
Currently have CUCM 7.1.3.32900-4 with UCCX 7.0(1)SR05_Build504 - Moving to CUCM 8x (probably 8.1) 1st Qtr 2011. Want to maintain UCCX on 7x. Is this possible/compatible ? Can someone confirm and if you have experience any gotchas to share is greatly appreciate.

Hi
Thats correct UCCX 7.x is not compatible with CUCM 8.x version.
UCCX talks to CUCM with the help of JTAPI protocol, Every major release of CUCM has a different version of JTAPI which UCCX downloads from CUCM when JTAPI sync is performed.
Unfortunately the JTAPI version of CUCM 8.x is not tested with UCCX 7.x version thus its not present in compatability matrix. UCCX 8.x which is out supports CUCM 8.x Also UCCX 7.0(2) which will be coming out later this year or early next year might have the support for 8.x - not sure on that though
Hope this helps
Anuj

Is UCCX - 8.5.1.11001-35 (8.5.1 SU1) compatible with CUCM - 8.6.1.20000-1 (8.6 1a)

Hi,
I am referring the UCCX 8.5 compatibility matrix:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
Per the above document, UCCX 8.5.1 SU1 is compatible with CUCM 8.6.1, it doesn't specify whether it is compatible with CUCM 8.6.1a.
Can someone shed some light, is it safe to assume that CUCM 8.6.1a is also compatible?
Thanks in advance,
inner_silence

Su's are also supported.
Here are 2 examples which will answer both your questions.
If CUCM 8.5(1)SU1 is qualified with UCCX 8.5(1), then all ES of CUCM 8.5(1)SU1 is considered qualified with UCCX 8.5(1).
If CUCM 8.5(1) is qualified with UCCX 8.5(1), then all SU of CUCM 8.5(1)SU1 is considered qualified with UCCX 8.5(1).
Hope this clarifies.
Shirish

CCIE Collaboration - Integrating UCCX 9 with CUCM 9

Hello guys,
I just saw that video integrating UCCX 9 with CUCM 9 .hope you will like it..
http://voicebootcamp.com/index.php/free-video-labs/video/latest/uccx9
enjoy..

No, it's not. You are reading it correctly. None of the UCCX 9x versions support CUCM 7x.
The last UCCX version to support CUCM 7x was 8.0(2)SU4.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

UCCX 5 Seat Bundle with CUCM

Hi.
Currently we have a customer with CUCM 8.6 cluster. Customer also deployed a UCCX System with Premium seats. Now customer would like to add to that UCCX system the 5 seats that comes with the CUCM 8.6 cluster. Is that doable? I know that in order to use the 5 enhanced seats that comes with new CUCM Deployments we need to buy a part number ($2995) to be able to install the software, database, etc. But now the the customer already have a UCCX deployment.. can he use the 5 enhanced seats... upgrading them to premium first and then loading the licenses on the new system.
I'm going to open a case with licensing but I want to check here first.
Thanks in advanced,
-Jose

Hi Haitham,
Its is compatiable with both MCS and UCS servers. I think you need to register your PAK and contact [email protected] for mentioning about your License MAC (type show status on the CLI after you install UCCX on UCS server) to get the appropriate license.
There are limitations on the maximum IVR ports in the UCCX system.
Maximum IVR ports=2*No of Agent seat counts till you reach the hardware capacity limits say for an example say MCS 7845 seres boxes support a maximum of 300 Licensed IVR ports, after you increase your Agent seat count from 150 onwards the licensed IVR ports will not increase as it has its its max capacity in this hardware.
Coming back to your question, yes in order to increase the IVR ports you need to oreder more Agent Seat counts.
Hope it helps.
Anand
Please rate helpful posts !!

Silent monitoring calls with CUCM 6.0 and UCCX 5.0

Dear all,
We have just integrated a 3rd party recording solution in our VoIP system, which consists of CUCM 6.0 and UCCX 5.0.
Until now we used the recording and monitoring solution of the UCCX for the agents. This worked ok.
But, as we wanted to record other people's calls and also the outgoing calls of the agents, we have created for them a Recording profile in the CCM and assign it to the agents phone.
We have also mantained the recording and monitoring active for them in the UCCX.
What is happenning now is the following:
- The 3rd party recordings works perfectly.
- The recording in the UCCX gets only one way audio.
- The silent monitoring gets only one way audio.
- If the 3rd party recording server is stopped, but the recording profile is stil active in the phones, the silent monitoring in the UCCX works.
Could any of you confirm if using a 3rd party recording solution the monitoring still works?
Is there any 3rd party silent monitoring software?
Thanks in advcance.
Best regards,
Amaia

We've got to delimit the problem.
When we use 3rd party recording solution there are 4 RTP flows: 1 incoming to monitored/recorded phone and 3 flows outgoing.
1 incoming RTP flows
- voice of remote phone
3 outgoing RTP flows
- voice of monitored/recorded phone
- voice of monitored/recorded phone sent to 3d party recording server
- voice of remote phone sent to 3rd party recording server
When we use a network analyzer we see that the agent running in the PC (UCCX 5.0) establishes two RTP flows for the monitoring session. But we can see that one of these flows sends 3 packet RTP per 1 packet RTP sent in the other RTP flow (in the same time).
We think agent sends to monitoring device all the outoing RTP packets of the phone (that belong to three different RTP flows), instead of sending only the RTP packets belonging to voice of monitored/recorded phone.
The other flow, voice of remote phone, sounds fine.
Is there a solution to avoid this problem when we monitor with UCCX 5.0 and record with a 3rd party software at the same time?
Thanks,
Christian

Unity 7 with cucm 8

Hi all experts.
Is unity 7 with domino supported with cucm 8 ?
I checked the following link and it seemed confusing
http://tools.cisco.com/ITDIT/vtgsca/VTGServlet
Kindly confirm

Hello -
I think this is a more clear document - http://www.cisco.com/en/US/docs/voice_ip_comm/unity/compatibility/matrix/cutspmtx.html
At minimum, you may just need to update the Unity TSP (AVSkinnyTSP) to match it with CUCM - this is most often recommended to help with MWI issues.
Sincerely,
Ginger

Recommendation on a Pharmacy IVR system that'll work with CUCM

Hello,
I'm wondering if anyone out there has any recommendation on a pharmacy IVR system that will work well with CUCM. Was it a breeze to deploy or was it full of headaches? Any suggestions and recommendations are truly appreciated.
Thank you,
Randy C.

Hello Gergely,
Thanks for taking the time to respond. .
We do have UCCX but we don't use IVR on it. This definitely would be a consideration. Do you know if UCCX IVR can work with our pharmacy's system? Say for example, a customer asks for a refill request of their medication using IVR by just entering the prescription number.
Also, what are the capabilities/limitations of UCCX IVR?
-Randy C.

Cisco Unity Express (NME-CUE) Compatibility for CUCM 9.1.2

I unable to find latest Compatibility matrix for Cisco Unity Express (NME-CUE) module for integrating with CUCM 9.1.2
The URL: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html is updated with CUCM 9.0 only.
Request to share Compatibility matrix or suggest Hardware and software for my below requirement.
I am running NME-CUE 7.0.6 on 2951 ISR2 with IOS version 15.2(4)M5 and integrated with CUCM 7.1.5 using SCCP.
I am upgrading my CUCM to 9.1.2 and need suggestion on upgrading the CUE.
Also need details on Licensing for approx 100 Mailbox and 25 Voice Ports (No need of IVR Ports).
Thanks,
Chandan

Hi Chandan,
CUE 8.6.6 and later are compatible with CUCM 9.1.x;
Support for Cisco Unified Communications Manager 9.1
Cisco Unity Express 8.6.6 provides support for Cisco Unified Communications Manager 9.1.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel8_6/rel_notes/rel_notes86.html#pgfId-411381
Because you are moving from a pre-7.1 CUE version you will need to follow the CSL License migration process;
NoteWhen you upgrade to Cisco Unity Express Release 8.6.x from any release prior to Cisco Unity Express Release 7.1, you must replace your pre-CSL licenses with CSL licenses. You must migrate your licenses for the mailbox features and port features. If you have purchased the optional IVR features, you should also migrate your licenses for the IVR features.
Software Activation for Cisco Unity Express 7.1 and Later Versions
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/CUELicensing_book.html
Cheers!
Rob

Cisco Unified MeetingPlace Express Compatibility with Cisco Unified Communications Manager Release 8.X

I have a customer that would like to upgrade CUCM to either 7.1 or 8.0 and has Meeting Place Express.
In trying to establish compatability I found this link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp56211 which shows compatabilty up to CUCM 7.0.
If CUCM 7.0 is in fact the highest version supported with MPE 2.1(1.2), that would mean that they would loose their conferencing server.
Can anyone confirm if there will be MPE support for CUCM 7.1 or 8?
Thank you.

7.1 is still supported, however 8.X was never tested with MPE as it was already going to be replaced with MP.
Since the BU never tested it, it falls under not supported, MP8 is supported with CUCM 8.
But, since it uses a standard H323 trunk it should work fine.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Is UCCX 8.5(1) compatable with CUCM 8.6

Similar Messages

Maybe you are looking for