Is using ACFS for CFS is good idea?

Hello Experts.
Planning to build a RAC on following environment.
Oracle Database Ver.: 11.2.0.3
OS: Linux RHEL 6.1 - 64 Bit
Servers: HP
ASM and ACFS for storage.
Here need a advice: Is using ACFS for CFS is good idea or anything else better than this?
Thank you in advance:
Ajazjn76.

Hi,
Great to think of Oracle11g 11.2.0.3 RAC(Don't forget to install Patch 13440962) but do consider below
1.) Implementing ACFS is supported for Shared Oracle Home.
2.) ACFS is a good option for storing Backups(Ex. RMAN,Exports etc)
3.) Can be used as a NFS Shared drive for other NFS clients.
You will also see a resource "ora.registry.acfs" just after you start creating/using ACFS.
ACFS is cool to use using asmcmd commands or alter diskgroup sql statements.
ACFS is as better like other Vendor Cluster File system.
Thanks
Deepak

Similar Messages

To Much artists for iTunes. Good Idea present.

I recently started using iTunes and a few things weren't as good as they could.
What did I like: iTunes automaticly removes "The" from the artists name.
What I didn't like: I have more then 2000 artists in my list, reason is lack of 'smart' thinking of iTunes.
For Example i have (dutch artist):
Ali B
Ali B ft. Brace
Ali B ft. Andre Hazes
Ali B ft. Gio
Ali B ft. Yes-R
Ali B ft. Yes-R & partysquad
Ali B ft. partysquad
Ali B is a HipHop artist and the same problem occurs with for example jay-z.
The solution can be very easy. Artist whom are always a duet like Simon & Garfunkel you write with a "&". Temporary duets always have one main artist and one guest artist (like with ray charles's - Genius loves company) the guest artist is always writte with "ft." or "feat." or "featuring".
In my artist list i want to look for Norah Jones and also want to find her nummer: Ray Charles ft. Norah Jones - Here we go again.
I Hope there will be an update soon with my idea implamented.
In the mean time:
Are there any opinions about this idea and do you have the same problem?

I take the featured artist out of the Artist filed and put it in the song title.
Smooth - Santana featuring Rob Thomas
becomes
Smooth featuring Rob Thomas - Santana
You can send your ideas to Apple here -> Apple product feedback

Using A Palm Pilot Today Good Idea or are they becoming obsolete?

I started using a Palm Pilot in 1997. I used one constantly until 2006 when I broke the Palm PDA I had at the time and did not replace it.
I still use the desk top software (Palm One Ver 4.1.4).
I would like to go back to using a Palm Pilot. I will probably break a few again so I would prefer an inexpensive model and I am only interested in the To Do List, Addresses and Calender features. I use Vista now and will move on to Windows 7 shortly.
What model do you suggest I purchase and where is the best place to buy them.?
and
How long do you think we will be able to keep using these devices or will they eventually get overwhelmed by Black Berries, iPhones and Pre's?
Thanks for your help
Brian Smith
Nanaimo
Vancouver Island
British Columbia
Post relates to: None

There is a version of Palm Desktop for Vista, but I'm not familiar with the details or whether it is compatible with your device. Check out this article:
Palm Support : Palm Desktop 6.2 and HotSync Manager (Windows)
http://kb.palm.com/wps/portal/kb/common/article/32859_en.html

Blackmagic Intenisty Pro card for my Macpro - good idea?

Can anyone tell me the advantages of using a Blackmagic Intenisty Pro card in my Macpro.
We shoot 50% wedding films and 50% corporate films.
I am now shooting and editing in HD using my Sony Z1 and FCP then exporting as SD to Compressor.
I just think that shooting in HD gives the footage that extra punch and also gives me more editing options. I have read a lot about this card - which will limit the problems i have been having with Conforming HD footage in FCPs timeline which takes ages to render - or should i transcode to AIC or ProRes422 before editing?

What the card adds to the party here, is the ability to view your HD video externally on a video monitor, and allows you to capture it as ProRes. Which is better than the AIC codec. ProRes files will render a lot faster than native HDV files, and they are visually lossless. Capturing to the AIC will lose quality
Jerry

HT1222 I like the new iOS 7 for iphone... But i think it's not a good idea to allow switch the iphone on flight mode when it is locked.. What happens if your iphone is stolen or lost? You couldn't be able to locate it using find my iphone... Can i remove

I like the new iOS 7 for iphone... But i think it's not a good idea to allow switch the iphone on flight mode when it is locked.. What happens if your iphone is stolen or lost? You couldn't be able to locate it using find my iphone... Can i remove this from the bottom menu?

And have your phone set to require a passcode before it can be accessed.

I want to use a fantom diamond as an external hard drive for my mac, is this a good idea?

Using a Macbook pro, with Snow Leopard (I think), and my memory is full so I want to store my stuff on an external hard drive. I found a 2T Fantom Diamond EHD, but I'm now learning that I have to convert to NTFS-3g. I'm not computer savy so I want to know if this is a good idea, or should I look for something different. Also, can I set up the EHD as the default path for itunes?

This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

Is it a good idea to use ABAP objects for reports?

Hello Experts,
Is it a good idea to use ABAP objects instead of the traditional ABAP for coding reports?

Hi,
Go throught Document it will Give you eight Reasons why OOABAP Should be used.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/37c5db90-0201-0010-3a9b-d0a5288f3c15
Must go through
Regards,
Gurpreet

Is it good idea to use style sheet for the bgcolor of a table that is just

is it good idea to use style sheet for the bgcolor of a table that is just being used for formatting

Hi,
CSS is a way to do so. I don't think that there is any problem with using CSS on any kind of table
Frank

Why does it take so long for microsoft to incorporate good ideas into programs, but then after they do no one elses software will work on the system?

Case in point: I can not use Xp any longer since it is not supported by microsoft, and latest lan driver requires xp service packs which are no longer available for XP or Vista. So my old software as of April 2014 is now worthless as internet access software(microsoft
will not provide support or service packs for xp). So I get a new pc with WIN7 op system installed and try to do traditional backups to protect myself should my system crash in the future. (usually this means cloning a hard drive or installing Faronics Deep
Freeze to protect my op system in case of catastrophic failure.) I try to install and use some of these utility software types including Acronis Disk Director 12, Avanquest Perfect Image, Partition Commander 10, and others True Image Hdd utility for cloning
hdds. Most of these I try to run turn out to be useless, and I get pop-up messages saying my software is incompatible with win 7 op sys! I am wondering if it is the software or the fact the op system is 64bit (not 32 bit) which means that if you buy any other
software to help with utilities it will be worthless because most are written for 32 bit systems not 64. No one tells you these warning signs when you buy the pc with the 64 bit software already installed. But for a Toshiba 15" computer that normally
costs 400$ and I can get it at Goodwill used computer store(1stStreet and Fairview in Santa Ana, Ca.) for 175$ I can not complain. Being an unemployed electronic technician, I have to stretch my dollars as far as they will go...Another frustrating thing is
I buy this device made by Apricorn Driveware that allows users to hookup a second hdd using a usb cable and a three connector module that will allow the user to connect any hard drive sata or ide or the 3rd type. I try to run it and make a backup copy of internal
hdd but I get error messages saying it can not copy hdds when there are minor differences such as total mbs on each drive or slightly different hardware issues such as my pc has 580 gb internal drive and replacement backup drive is 380gb. Such as shame because
hardware setup is a good idea but without compatible software it is useless! Perhaps if I was using it on my old xp op systems I would have fewer problems with software compatibility issues. I really hate the fact that MS does not provide support for known
good op systems like xp say 20yrs? When the products and markets change so fast they run the risk of alienating customers who can not financially keep up with technology changes especially during an economic depression such as the one we are in now( they predict
it will last 20 yrs). a curious thing about the Acronis disk director 12 software I installed. It seemed I could not get partion size on hdd to change no matter what I did. I found out that if I CHANGED THE DATA BLOCK SIZE ON THE NTFS PARTITION FROM 4 KB TO
2 KB THAT I WAS NO LONGER LIMITED BY THE SOFTWARE FROM SHRINKING THE HDD PARTITION FROM 300GB DOWN TO 100GB. Once this item was changed on the hard drives the Disk Director 12 software (Acronis) was able to shrink the partition size to what I wanted.

Due to phenomenal development in Windows, Microsoft released 4 generations of operating systems, succeeding Windows XP. Hence, on various aspects, Windows XP becomes too old to be used practically these days. So the support was pulled out.
I do agree that Windows XP is the most successful operating system ever, so far. But, later versions added more features, enhanced security and compatibility. Moreover, at this point, Windows XP becomes more vulnerable, although security patches are made.
Ultimately, we need to move to a more secure, feature-rich and highly compatible operating system.
With improved features in newer versions of Windows, the NTFS filesystem has also been improved, adding new features. Hence, certain feaures that are not availble in Windows XP are available in Windows 7, again, in Windows 8.1. So is the disk management
features.
As for Acronis Disk Director, it's a third party software and hence we can't comment on the features/its working.
Balaji Kundalam

Use of "Rel" Attribute in Links -- Good Idea?

Hi --
I was reading about various SEO methods recently and came
across several
pages which advocate the use of the "Rel" attribute on a
hyperlink. The idea
being that the "Rel" may influence how a search engine views
a link and
possibly help with ranking. For example: <a
href="help.html" rel="Help">
need help?</a>.
Sounds like a good idea, but the more I read the confused I
became. A Danny
Sullivan article about use of the attribute "nofollow" used
by major search
engines made sense. It was the other article I read which
used all
different types of attributes that confused me such as
rel="met colleague",
rel="alternate". Is there someplace I can go to find a list
of widely
accepted attributes?
Anyone have any experience with this?
John

Thanks, Joe. Yep, the source is the best place to start.
Should have
thought of that myself.
I suspect you're assessment is correct...won't hurt, might
help.
Thanks again.
John
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]..
> On 02 Apr 2008 in macromedia.dreamweaver, Tarvardian
wrote:
>
>> Is there someplace I can go to find a list of widely
>> accepted attributes?
>
> How 'bout the source?
>
>
http://www.w3.org/TR/html401/struct/links.html#adef-rel
>
> Note that it has a set of defined values:
>
>
http://www.w3.org/TR/html401/types.html#type-links
>
> In looking over the documentation, and given my
understanding of the way
> things work in the here and now, I suspect that it's one
of those "Won't
> hurt, might help" kind of things.
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/contact.php

Considering using 20" Imac with larger external monitor - good idea?

I've just returned my 24" Imac for a refund due to the uneven brightness issue. I want a set up for my illustration work, but can't justify the price of a mac pro + monitor. Therefore I'm considering a 20" Imac 2.4 GHZ, and connecting an external 23/24" monitor that has better consistent brightness than the Imac screens, e.g. the Dell 2407WFP-HC or an 23" Apple cinema display. The idea is that, any problems with gradients on the Imac screen won't bother me as I'll be using it merely as a web browser.
Is this a good idea? Will there be any problems running a larger monitor of the Imac - any compatibility issues etc. Can anyone recommend a good screen around the £500 mark or under? I basically want a screen that isn't obviously brighter on one side than the other, as the Imac appears to be.

I know uneven lighting is a complaint among 24" iMac users - and I've seen two myself. But not all of them have the problem. You might want to consider trying another before giving up on them. Having said that - take a look at Samsung displays. I don't know what they run in the UK but I'm very impressed with the ones we have at work.

Is a time capsule a good idea for a college student living in a dorm?

Is a time capsule a good idea for a college student living in a dorm?

Before you buy......you need to check with the school to see if they allow wireless routers in the dorms, or on campus at all.
Most schools prohibt the use of wireless routers due to interference issues.
Even if the school might allow this, there is no way to know in advance how well this might work....and frankly this type of setup is difficult, even if you have a friend who "knows computers".
If it were me, I would purchase a hard drive for backups....just like you do now.... and send an email once or twice a week to the student to remind them to "backup".

Hi guys i had been an iPhone 5 user for about 3 years and i have recently swapped over to a samsung s4 i dont know if this was a good idea any assistance or light in the right direction would be appreciated?

Hi guys i had been an iPhone 5 user for about 3 years and i have recently swapped over to a samsung s4 i dont know if this was a good idea any assistance or light in the right direction would be appreciated?

Sorry i correct myself i had been an iPhone user for about 3 years. My last Apple iPhone was an iPhone 5. I am getting used to things with the Samsung but really think the extra features such as smart stay and scroll are coverting humans into robots. The configuration of the features is also difficult as it detects your eye movement so if the movement is out of place even the slightest the feature will not function. I think the ios user interface is simple in comparison to the android user interface. Any views are appreciated? I have many friends also using HTC and prefer it in comparison to the iPhone and Galaxy but as raymond73 mentioned choice is a wonderful thing.

Is using a taskbar icon in .exe combined with windows service a good idea as part of an alarm system?

My client wants an alert system and his focus is on the taskbar. He wants the icon to change, (and ideally even blink) and also to have some beeping when a new work request comes in. It needs to run constantly, and grab the attention of an operator
who may not be paying much attention to the screen.
I’m excited to develop this, but after years of web development, I feel paralyzed. I must be making this harder than it needs to be, but here’s my plan… I'll start with a windows form, which will run minimized, and have an icon that looks like
a hammer in the taskbar. A timer would continually check for a new service requests. When it sees one it would change the toolbar icon to a red x and sent a few dozen beeps out to the operator. I think I need a windows service running that
checks periodically to see if my windows exe is running. If not, it should start it up. Perhaps this could be a scheduled task, rather than a service.
Some of my questions are;
How do I change the taskbar icon on the fly?
Is this a good idea, or is there an easier way?
Snippets of code or related articles are most welcome!
Thanks!

So I created a windows form and added a timer to check for unacknowledged requests. If it finds any, it changes the icon on for the taskbar, and makes a beep. Simple, but it works. However, I'm having a beep of a time trying to figure out
where to put the ico files so they are where they need when I publish it. Others seem to suggest adding them using the properties of the application, under application / resources / Icon and manigest blah blah blah. But I can only seem to add one
there. I need the three different ones. I'm confused! Any suggestions?
private bool iconBig = true;
private Icon redcross = new Icon("..\\NewRequest.ico");
private Icon redcross2 = new Icon("..\\NewRequest2.ico");
private Icon hammer = new Icon("..\\Hammer.ico");
private void timer1_Tick(object sender, EventArgs e)
List<WorkRequest> myWorkRequests = WorkRequestData.WorkRequest_unAcknowledged();
if (myWorkRequests.Count > 0)
for (int i = 0; i < 5; i++)
SystemSounds.Beep.Play();
if (iconBig == true)
iconBig = false;
this.Icon = redcross;
this.Refresh();
else
iconBig = true;
this.Icon = redcross2;
this.Refresh();
else
this.Icon = hammer;
this.Refresh();

Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc. So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made. I don't want to introduce issues by mass-recompiling to the latest version.
What is best practice in this case? I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
Any ideas?
Solved!
Go to Solution.

The report is a great idea! I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason. Those files have sure come in handy!
Also- its a good idea to make an image of the target as accepted and archive it somewhere. ESPECIALLY for PXI based systems from NI. (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
Jeff

Is using ACFS for CFS is good idea?

Similar Messages

Maybe you are looking for