IS - Utilities. - Device Management Problem

Dear Experts,
Greetings..!! Currently I'm working with IS Utilities Project. I'm Basically MM Consultant.In this way I done Below Configurations.
Material Created and assigned to Device.
Created PO and With Automatic Number Range, system Posted Goods. and device Status Showing as ESTO ( Ware House Stock )
Now i would like make this status as AVBL ( Available for installation ). So what is the procedure...???
If anybody have knowledge on this please give solution. Expecting your Positive Response on this
Thnx & Reg
Pavan G Kulkarni

Hello, Pavan,
Unfortunately, I am haven't any cookbook about movement type U61 and U62, but at our project we had used this movement type. Our system (with IS-U add-on) was 4.72 and system has not well-defined U61 and U62. I was not find any notes at the marketplace. I am making its "by hand". And then is using U61 to transfer devices at NET warehouse.
First you need to create new movement type U61(U62). The way is not ordinary((( The path is follow(Quality Management-Quality Inspection-Inspection Lot Creation-Inspection for Goods Movements-Movement Type). Here you to point the movement type U61 and U62.
Second you need via standart (Inventory Managment and etc - Movement Types- Copy,Change Mov.type ) to create new rule for U61 and U62.
May be exist another way to solve this problem)))
Regards
Evstratov Igor

Similar Messages

ME SDK 8.0 EA Device Manager - Problems with Serial COM-Connection

I caught a first glimpse at the new ME SDK 8.0 - so far I have been working only with very old JavaME-Stuff on a Cinterion-TC65i-Chip.
Want to connect my Raspberry Pi via serial COM-Connection with the SDK-8.0-EA-Device-Manager. (due to security reasons I'm not allowed to connect the Pi via LAN/Wifi)
But the problem is the ME SDK 8.0 EA Device Manager only offers me COM4 (this is my built-in UMTS-Modem) - even though my target-COM-Device isn't busy at all.
A serial connection via Putty and USB2Serial-Cabel (FTDDI) works fine and I can get on my Raspberry.
Is there any reason or restriction I don't know for being unable to use my dedicated COM-Port? Or do I have to make any additional adjustments in hidden SDK-Property-files?
In my opinion the device manager using COM should offer me the same possibilities as an IP-Connection regarding the target-device (transfering my Jad/jar to the device, installing them and starting them).
There is something in the SDK-get-Started Docu about "Connecting to a UART Device" I'm not really cotton on . Is this information concerning me even though I'm using a Raspberry PI?
To put my files manually via USB-Stick or Z-Modem on the PI is a tad of inconvinient.
Any ideas? Or am I completely off track understanding your SDK-Tooling?
Thx and best regards

Hi,
For the Raspberry Pi, tooling over serial port is not supported. The simplest solution is to use standard IP networking over Ethernet. This can be a direct connection between the PC and the Raspberry Pi, as long as the cable is twisted and the IP addressing is correct (e.g. manual IP addressing or DHCP server on the PC).
Regarding "Connecting to a UART Device": This is meant for attaching and controlling serial devices from the Raspberry Pi, not for tooling connections between the Raspberry Pi and the PC.
Hope this helps,
-- Terrence

Hp notebook problem model # dv9823cl the cd/dvd player is not found in bios or device manager

If the CD/DVD player is not found in either the BIOS or Device manager is the problem in the motherboard?
if it is besides getting an external CD/DVD player, is there any other solutions?
Thanks

Before giving up hope I would try hard resetting the computer. Here is how you can hard reset the laptop:
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.
Sometimes by removing all electricity from the computer and then reintroducing it, issues like this can be resolved. Give this a try and let me know if it resolves the issue or not.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

I am using the generation 1 IPAD.
I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
Thanks,
Vinay

Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
Anything else I am missing?

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

I am using Iphone 4S, Problem is my PC is not detecting iphone as a storage device, i tried with device manager, tried to install drivers but its showing drivers allready installed, Pls can any one help

try this and see if it works: connect your iPhone and open up iTunes on your PC. Go to your phone's page. Under Summary page, check manually manage music and videos.

Apple Mobile Device USB Driver is listed in device manager, but has a yellow "!". I try reinstall,disable,enable the drivers but the problem persist. Could you help me ?

Hi
I connect my ipad to my pc (Windows xp SP3) and I can see my ipad and photos in my computer. When I install the itunes 11 , after installation , I can't connect the ipad again or any other apple device. The Apple Mobile Device USB Driver is listed in device manager, but has a yellow "!".
I have try to reinstall the drivers from c:\progamfiles\common files\apple\... but the problem persist. Could you help anyone about this ?

You need to completely uninstall iTunes from your computer and then download and install it again.
You do know that Microsoft has a web site, right?

Windows Device Manager shows several driver problems

I have the latest EFI Firmware update and Boot Camp 1.1.1. Windows XP Pro SP2 shows problems in the Device Manager.
(1) What's the USB Human Interface problem? I have no funny USB devices connected.
(2) What's with the yellow question mark at Base System Device?
(3) I have four PCI Express ports flagged with problems.
I'm guessing that the Boot Camp Driver CD has omitted to provide for these devices. I am surmising that many others who have the Mac Pro also see these problems.
Is there any way of dealing with these and fixing the problems? Like, can I download the required drivers from Intel? I have already downloaded and installed INF Update Utility [INFINST_AUTO.EXE] version 2.11.15.0. This was no help in resolving the problem.

I too have had issue with Bluetooth keyboard, specifically the Apple keyboard. It seems to be running ok at the moment but it took me a while for it to pair properly. I still have no idea as to what I did differently that made it work. I think it was pairing them without a code.
Fortunately for me I use Parallels mostly as it's far more convenient so I'm not too bothered about Boot Camp driver support at this moment. When it comes time to play some games though that'll probably change.
The thing with Boot Camp is to be a little patient. Yes we'd like Apple to have sorted everything out a month ago although the software is still in beta form and does not need to be finalised until the realese of Leopard. Hopefully they will get things together sooner rather than later given the clock is ticking.

Problems with device manager tacacs authentication

We've recently upgraded our Device Manager to 4.1(3a) and have a mix of switches running this version as well as older versions (3.3(3)). We use AAA tacacs+ on the switches to a Cisco ACS server for user authentication. The ACS server backends out to our Windows Domain authentication service. Typically usernames are formatted as follows: domain\username
This has worked fine for a long time, however now DM 4.1(3a) can't authenticate a user on a 3.3(3) switch. Various debugs and logs on the ACS point to problems handling the \ character in the username. A single \ gets "eaten" by either DM or the switch(don't know which) and the ACS sees a login attempt from domainusername, which of course fails. A \\ doesn't work either, in this case both \ characters are passed through to the ACS which now see a login attempt from domain\\username which also fails.
Looked at all the release notes, CCO bug searches, google and previous forum articles and found nothing on this.
Any help would be appreciated.
thanks,
Peter

Hi Dexios and welcome to the forums!
Here is the knowledgebase article on desktop/Bluettoth connection:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04132&sliceId=SAL_Pub...
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem With Device Management in Campus Manager

hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
why does it hapened ?
thank you .

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Loads of problems with Desktop Manger and Device Manager

Hi,
I just picked up the 8220, real excited until I've had to sit and reinstall the software 3 times, and download the no media manager one off the site, and yet I still cant get my 8220 to connect. I plug it in and Win xp recognizes it and I can see it in the device manager, but everytime I access device manager it says everything is disabled or disconnected. I've tried downloading the french usb-modem drivers from blackberry, tried version 4.5 desktop manager and yet nothing. I went into device manager in windows and unistalled the phone, then scanned to reinstall it and still nothing. Any thoughts?? before I give up?

Hi,
I would recommend the following:
I would do the following:
Use this link to uninstall the current DM
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
Download DM 4.5 without Media manager. MM is very unstable:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Download these USB drivers for 4.5
BlackBerry USB and Modem Drivers ENG (DM4.5 B13)
File size: 12.33545 MB
Date posted: 24-June-07
Download Software
Here is the manual:
http://na.blackberry.com/eng/deliverables/3392/Desktop_enterprise_45_final_492431_11.pdf
Cold boot the PC. Turn of all virus checkers and firewalls.
Install the DM WITH FULL ADMINISTRATOR RIGHTS ,and configure for Outlook
Start the DM pull the battery from the devie while it is ON, Replace and connect to USB
while the device is loading, start the DM.
Connect and Sync.
Thanks,
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Device showing problem in device manager

Can someone tell me where can I download the driver for the biometric microprocessor that shows in device manager?
Thanks
JZ

http://www-307.ibm.com/pc/support/site.wss/product.do?doctypeind=9&template=/productselection/landin... This one should get you part the way there. You have to type in your make, model, operating system ect., then a list of drivers for your machine will come up, just look for the Biometrics driver. Or http://www.lenovo.com/us then go to support and downloads, but I think either way it is the same.
Cheers,
Singtoh
7663-A22,T61 14.1 Wide,T7300 2.0gig processor, 4 gig RAM, 500gig Seagate Hybrid HDD, 200gig Ultra Bay HDD, Ubuntu 64 Bit.

After upgrading to mountain lion,my HP device manager can't find scanner

I have an HP Photosmart C5550 All-in-One printer scanner.
The HP device manager can't find the scanner. Printer works fine.
I upgraded from Lion to Mountain Lion and this is my problem now.

Try the HP Photosmart C5500 series app in /username/Library/Printers/, HP Utility->Devices in /Library/Printers/hp/Utilities/, Image Capture, or Preview->File->Import from scanner option.

USB Host controller missing in device manager

Hello,
I've installed WIN 7 64 bit on my laptop; everything worked fine at the beginning; but after a couple of days, after a system update, all of the 4 USB ports stop working
In device manager there is no USB Host controller entry, and I have four device named "Multifunction device" marked in error
Already tried without success:
- update device driver autosearch online
- uninstall device and reboot; the system can't find proper drivers
- reinstall all drivers from HP driver update utility
- reinstall drivers with Intel driver update utility
- reinstall windows (no reformat)
- other driver search utilities
I can rule out an hardware problem because if I boot from CDROM or even usb keys, they work properly; given this fact, if I reformat the disk probably I could fix the problem I guess, but I prefer avoid this extreme solution, I use this laptop for my job and I have lot of customer network and VPN configured.
Thanks

After following the Apple instructions on how to install Boot Camp on my MacBook, I had similar problems. I received the following non-functional driver list:
Bluetooth USB Host Controller
Coprocessor
Ethernet Controller
Network Controller
SM Bus Controller
Video Controller (VGA Compatible)
I tried running the repair feature from the OSX disc, no help. It may be noteworthy that I installed XP Professional SP3 straight off of an install disc, and did not do the following:
Install SP2
Install Boot Camp 2.1
Update to SP3
I am currently downloading Boot Camp 2.1 and hope that it will solve this problem. If anyone can help, please let me know!
Cedric

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IPod is not recognized by Windows, iTunes or Device Manager

I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices had malfunctioned..."
When disconnect, iPod will sync. However, iTunes is on external drive; therefore musc is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device." Articles to solve recommend relettering device, bu how do I get it to be recognized by Device Manager?

I HAVE A SIMILAR PROBLEM TO THAT I JUST BOUGHT MY 30GB IPOD VIDEO ABOUT 4 HOURS AGO, SINCE THEN I HAVE BEEN REALLY STRUGGLING TO INSTALL IT. A SOON AS I GOT IT, I DID EXACTLY WHAT IT SAID, I WENT TO WWW.APPLE.COM/IPOD/START AND DOWNLOADED THE NEWEST ITUNES VERSION. THEN I PLUGGED IN MY IPOD TO MY COMPUTER, AND ALL THAT HAPPENS IS A LITTLE BUBBLE OPENS UP AND SAYS "FOUND NEW HARDWARE" WHEN I CLICK THAT, IT OPENS UP, AND I CLICK "INSTALL THE SOFTWARE AUTOMATICALLY" WHERE IT SAYS IT, THEN I CLICK NEXT AND WAIT. AFTER, IT SAYS "THE HARDWARE WAS NOT INSTALLED BECAUSE THE WIZARD CANNOT FIND THE NECESARRY SOFTWARE".AFTER I WENT TO WWW.APPLE.COM TO FIND OUT WHAT THE PROBLEM WAS, I'VE LOOKED THROUGH AND READ EVERY ARTICLE THAT CAN PERTAIN TO MY SITUTAION, BUT NONE HAVE HELPED ME I AM DISPLEASED TO SAY, THE LAST ARTICLE I READ WAS THIS ONE:
http://docs.info.apple.com/article.html?artnum=305136
BUT EVEN THAT DOES NOT HELP ME BECAUSE WHEN I GET TO STEP 8 WHICH SAYS "Locate the iPod in this list. In some cases one of the entries will have "iPod" in its name. If no such entries are present, the iPod is most likely represented by "USB Mass Storage Device." I LOOK FOR WHERE IT SAYS "IPOD" OR "USB MASS STORAGE DEVICE" UNDER "UNIVERSAL SERIAL BUS CONTROLLERS, AND CANNOT FIND EITHER THING..I HAVE RESTARTED MY COMPUTER A NUMBER OF TIMES, I HAVE EVEN UNISTALLED ITUNES THEN REINSTALLED IT I HAVE STRETCHED EVERY OPTION AND NOTHING HAS WORKED..CAN SOME ONE PLEASE HELP ME??..I HAVE BEEN TRYING TO SOLVE THIS PROBLEM FOR 4 HOURS STRAIGHT STOPPING ONLY TO GO TO THE BATHROOM AND GRAB A BITE TO EAT..

IS - Utilities. - Device Management Problem

Similar Messages

Maybe you are looking for