Is version 4.8 backward compatible with 4.7 databases

or would I have to upgrade all my databases?
thanks
Nishant

Hello Nishant. There have been no database file format changes, but the log file format has changed. This information can be found in the change log:
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/changelog_4_8.html
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/upgrade_4_8_disk.html
If you are using a transactional environment, your log files will need to be upgraded. The steps to do this are described here:
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/upgrade_process.html
Ben Schmeckpeper

Similar Messages

  • XCelsius 2008 is not backward compatible with ver 4.5

    Post Author: Joseph
    CA Forum: Xcelsius and Live Office
    I tried opening a project that was done with ver 4.5 but it just said that "Crystal Xcelsius is unable to load this file. This file may be corrupt or may have features that cannot be supported by this version of Crystal Xcelsius." So i guess I probably have to recreate the project in the 2008 version to take advantage of the new features available. So I imported the excel datasheet used in the old project to a new project in Xcelsius 2008 and tried recreating the objects from scratch. I had started with an accordion menu and two list boxes and then I decided to export to swf to test. However, the result was disappointing. I could only see the two list boxes but not the accordion menu. There was a message saying "Initializing..." that stayed. Does this mean I have to recreate the excel data from scratch as well?

    Post Author: abrat
    CA Forum: Xcelsius and Live Office
    X2008 is backward compatible with CX4.5.  But Jim is correct. There is a bug in X2008 which prevents it from opening some 4.5 models by double-clicking on the filename.  They can be opened from the File > Open menu.  This only affects opening the model.Due to the many changes between CX4.5 and X2008, the migration of old CX4.5 models is not clean.  Differences will be seen.  Most are cosmetic affecting only the look of the model.  But some tidy up, color changes and re-alignment work must be done.   There was no way to gain the benefits of X2008 and still keep CX4.5 models unchanged.Andy  

  • CC Apps NOT Backward compatible with Master Collection 6.0...WHY NOT?!!!!

    This is just horse doodoo. Adobe, you've already got us hooked and paying out the nose, so WHY do I have to save all of my files in an OLDER version (InDesign, for instance) when I'm working on them in Creative Cloud just so I can be able to open them with my MasterCollection6 I paid $3000+ for?
    I should NEVER see the message: "Cannot save because file was created with a newer version Creative Cloud..." when I am working with your latest NON-MONTHLY CS6 Master Collection Apps. It is a pain in the a$$ and slows down our workflow.
    PLEASE, either give your loyal Master Collection 6 customers updates that make our Apps compatible with Creative Cloud, or start making Creative Cloud Apps backward compatible with our 6.xx version!
    Stop trying to hold us hostage with your plans to monthly-revenue everything we already paid thousands for, please!
    Sincerely pisT,
    Small Business Owner

    New features in new software does sometimes mean that new files do not open in old software
    Microsoft also does this... the new DOCX documents will not open in the old Word 97 (and, in fact, I had to buy MS Office 2003 because MS Office 97 would not even install and run on Windows 7)

  • The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol. My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this. Any idea how it can be fixed???

    The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
    My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
    Any idea how it can be fixed??????

    Hello,
    You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
    However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy.  There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
    I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player?  Not  knowing the model of the Sony it is hard to investigate.
    And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
    JT

  • How can I download an older version of i tunes compatible with my i book G4 on os x 10.4 ?

    how can I download an older version of i tunes compatible with my i book G4 on os x 10.4 ?

    Thks Niel. Any idea about the following issue ?
    Dowload i tunes according to the link you sent went well, I did recover my i tunes.
    But now i photo identified my device i phone 4s but i tunes doesn't, what can I do ?
    Marcodk

  • Is The iPod Touch Backward Compatible With USB 1.1 Connections?

    Hi. I intend to get the iPod Touch soon. But, before I make the leap, I'd like to know whether the iPod Touch is backward compatible with my older USB 1.1 connections. Any help will be appreciated here. Thank you.

    Hello Castlegard,
    As mentioned, the Minimum System Requirements for the iPod Touch does specify USB 2.0, see the requirements here:
    http://support.apple.com/kb/TS1323
    While it is theoretically possible to sync over a USB 1.1 connection, your mileage may vary. Consider that USB 1.1 has a transfer rate of 12Mbit/sec, where USB 2.0 is 480Mbit/sec, so USB 2.0 is basically 40x faster. Transferring small files may succeed, but when you try to get iTunes to update or restore an iPod Touch, it will be trying to push a 300MB file (approximately) through a 12Mbit pipe. Trying to do updates or restore via USB 1.1 will often result in iTunes timing out before the process is complete.
    If I were to try to sync a 1.5GB movie over a USB 1.1 connection, I could probably go to downtown Sydney and have a nice dinner and attend a concert at the Sydney Opera House and still get back before the sync was complete. BTW, I live in California...
    If your computer is a desktop tower, upgrading to USB 2.0 is a relatively inexpensive proposition. If you are not a handy person with a phillips screwdriver or electical devices, most computer dealers or resellers will install for a nominal fee.
    Charles H.

  • Captivate 2 backwards compatible with 1?

    Is Captivate 2 backwards compatible with Captivate 1?
    For example, would it be just the new features that would be
    disabled if I opened a Captivate 2 file in Captivate 1 such as
    scenarios, or would the whole file be unopenable.
    Also, how does the import work if I'm bringing a file in from
    Captivate 1? Do I just open it or would I need to rework anything?
    Also in Captivate 1, I've had to hand-write special htm files
    for the Active X problem. Are these sorted out in Captivate 2?
    I'm ready to release some training and I'm wondering if I
    should upgrade it before it goes out, e.g. to add some scenarios.
    But if it requires too much rework, I don't have the time right
    now.
    Thanks,
    Kim

    Hi Kim
    For discussion about backwards compatibility,
    Click
    here
    Yes, I do believe they have addressed the special coding
    required to handle the "click to activate this control" message we
    now see. So you shouldn't need to do anything special with respect
    to this issue.
    Cheers... Rick

  • Would pages '09 version 5.1 be compatible with Mac OS 10.7.5?

    Some pages files I got require Pages 5.1, but my Mac Pro could not be upgraded to Mavericks, so I am stuck with Mac OS 10.7.5.  Would pages '09 version 5.1 be compatible with Mac OS 10.7.5?

    Pages 09 isn't 5.1. It is 4.x. Pages 09 works on your Mac but Pages 5.x doesn't. You are better off using Pages 09 as it has about 100 more features than PAges 5 has!!!

  • Is a PCI-488.2-1M card backwards compatible with the 488-1975 standard?

    Is a PCI-488.2-1M card backwards compatible with the 488-1975 standard?

    IEEE 488-1975 is one of the early revisions of the IEEE 488.1 stardard, other revisions include 488-1978 and 488.1-1987.
    Because the original IEEE 488 document contained no guidelines for preferred syntax and format conventions, work continued on the specification to enhance system compatibility and configurability among test systems. This work resulted in a supplement standard, IEEE 488.2.
    So, both 488.1 and 488.2 support 488-1975
    I checked the link and it is fine, make sure you have the right web browser settings.
    http://sine.ni.com/apps/we/nioc.vp?cid=1233〈=US

  • Is there a version of Firefox mobile compatible with Samsung galaxy precedent mobile phone?

    Looking for a version of Firefox mobile compatible with Samsung galaxy precedent

    What OS do you have?
    Unfortunately the Firefox App is not working properly with 2.1 systems. Here are the bugs to follow their statuses: https://bugzilla.mozilla.org/buglist.cgi?order=Importance;list_id=2400841;short_desc=2.1;query_format=advanced;short_desc_type=allwordssubstr;product=Fennec;product=Fennec%20Native

  • What version of illustrator is compatible with MAC OS X 10.68

    Hello,
    I would know what version of illustrator is compatible with MAC OS X 10.68.
    I use a MAC BOOK, with this computer I don't use OS X Mavericks ! 
    Thanks.
    Bye Bye.

    bluejul,
    You can see which versions are compatible here:
    http://helpx.adobe.com/illustrator/system-requirements.html

  • Is NI-DAQmx 8.0 backward compatible with Lab View 7.1?

    Is NI-DAQmx 8.0 backward compatible with Lab View 7.1?

    YES it is but when you install it you must select support for LV 7.1 and 7.1 must be installed before you install daqmx 8.0.
    Joe.
    "NOTHING IS EVER EASY"

  • Which versions of Illiustrator are compatible with InDesign CS 5.5?

    which versions of Illiustrator are compatible with InDesign CS 5.5?

    Thank you for your reply Peter.  I have InDesign CS 5.5 and need to use Illustrator with it to update the data in graphs.  I know CS5.1 works, and am wondering if earlier versions (back to CS or Illustrator 10) would work as well to edit and re-save my graphs for use in the InDesign document.  Ultimately I need to incorporate the updated graphs in my document using InDesign 5.5, so that’s the compatibility I want to understand.

  • What are versions of Internet Explorer compatible with Dreamweaver CS5.5 ?

    What are versions of Internet Explorer compatible with Dreamweaver CS5.5 ?

    Hello,
    just to be safe you should test or validate your website there for example:
    http://www.my-debugbar.com/wiki/IETester/HomePage and
    CSS - http://jigsaw.w3.org/css-validator/
    HTML - http://validator.w3.org/
    JavaScript - http://www.jslint.com/
    PHP -  http://phpcodechecker.com/
    Hans-Günter

  • R7770-PMD1GD5 - Is it backwards compatible with PCIe x16 1.0a or 1.1?

    Hello, does anyone know if the MSI R7770-PMD1GD5 is backwards compatible with the older PCIe 1.0a and 1.1?
    I know all 3.0 PCie cards are supposed to be backwards compatible but I've read that some of them really aren't.
    Thanks in advance.

    gigabyte m68m-s2p http://www.gigabyte.com/products/product-page.aspx?pid=3498#ov

Maybe you are looking for