Is video conferencing and real-time communication available in an on-premise Sharepoint 2013 Server farm?

Hello Community
    In a Sharepoint 2013 Server on-premise server farm
is there a way to provide video conferencing and a form of
real-time communication even taking into consideration
using Yammer?
    Thank you
    Shabeaut

Hello Alex Brassington
Is there a way to embed/make accessible Lync server's audio/video conferencing functionality
into a SharePoint 2013 Server farm intranet site?
Shabeaut

Similar Messages

What "apps" are available in the "on-premise" Sharepoint 2013 Server evaluation edition?

Hello Community
    Is Yammer available in the "on-premise" SharePoint 2013 Server evaluation edition?
    Thank you
    Shabeaut

If you can see a option to setup Yammer, then you can do the setup.
Refer here - http://technet.microsoft.com/en-us/library/dn270535%28v=office.15%29.aspx
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

Do you need an additional slot for the RBS and does the RBS count as an additional hard drive in the Sharepoint 2013 Server farm?

Hello Community
    If you have a clustered Sharepoint 2013 Server farm running RAID 10, on a
clustered WS2012 R2 server that has 10 hard drive slots:
        (4) drives being part of the Sharepoint 2013 Server farm
        (1) drive for the Web App Server
        (5) are for hot swap if any of the production hard drives fail
    The question(s) is:
        - If the server only has 10 slots for hard drives are you still allowed to add a
NAS/RBS drive and does the NAS/RBS drive get clustered also, or does this scenario require
reducing the RAID level down to RAID 5 to allow for NAS/RBS hard drive?
        - Does the NAS/RBS hard drive need a hard drive for hot swap?
        - Does the NAS/RBS drive have to have Sharepoint 2013 Server or WS2012 R2 running on it?
        - Does the Web App Server have Sharepoint 2013 running or just WS2012 R2 running on it?
    Thank you
    Shabeaut

RAID 10 requires a minimum of 4 hard drives. The LUN for RBS must be attached to the SQL Server, not SharePoint server, as a local drive. You just need to be running the minimum required OS for the version of SQL Server you're using.
Do you mean Office Web Apps by "Web App Server"? If so, that cannot have SharePoint installed on it. Otherwise, if you're just referring to it as another SharePoint server, yes it would have SharePoint installed on it.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Real Time Communication

HI Gurus,
Can any one tell me what is REAL TIME COMMUNICATION.
Also I request information / details on RTCIS.
Regards
Ajoy

Hi Ajoy,
1.1 Application Scenarios for Real Time Communications
There are two classes of applications: client and server. Client class applications have one real-time client per computer, such as the traditional instant messenger (IM) application. Server class applications typically act on behalf of multiple users or communicate with many hundreds of users simultaneously. Server class applications are often based around intelligent applications that interact with users. These applications can be divided into two categories: notification Apps that send information to a client and interactive Apps that accept and respond to a client. A third type of server class applications, Web-based clients, interacts with users through a Web server.
1.2 Notification Applications
Notification Apps are real-time applications that send information to multiple clients from a centralized server (see Figure 1). The one-way transmission means that clients cannot communicate directly with the notification App. Instead, clients must choose which events they wish to receive by using some other technique, such as a Web application.
One example of a notification App is an application that notifies all of the users of a particular e-mail server that the server is about to go offline. Another useful notification App would send alerts in cases of severe weather.
1.3 Interactive Apps
Interactive Apps are applications that allow multiple clients to communicate with a central server in real-time, as Figure 2 shows. They are different from notification bots in that interactive bots support two-way communications with a client. Using this approach, you can build an application that interacts with users in real-time. Within this scenario, there are two main sub-scenarios. The first provides a user with information and waits for the user to respond, such as an application that notifies users about changes in stock prices and then gives the user the option to buy or sell. The second waits for the user to request a session with the App and then responds to requests that the user supplies, such as a calendar application that allows a user to schedule meetings and other events while receiving reminders just prior to the meeting or event.
1.4 Web-Based Clients
Web-based clients provide the same basic functionality as the traditional IM client through a Web interface, thus allowing the widest possible audience to use the application, as Figure 3 illustrates. It also has the side effect of eliminating the need for a user to download local software, which reduces user concerns about the download containing a potential virus. These types of clients are useful to organizations that wish to provide a Web-based front end to their internal IM system. For example, a company might wish to use a Web-based IM client to connect customers with a support group. Doing so maximizes the number of customers that can connect with the support group.
Real Time Communications Data Flow
It's critical that organizations planning large deployments of real-time communications applications ensure that those applications can scale to meet the desired goals. The RTC Client API is very efficient for client class applications for which each client runs on its own computer. To build a scalable RTC Client API application that services multiple clients with a single computer, you need to ensure that the application is scalable when you design it.
The Real-time Communications (RTC) Client API is a set of COM interfaces and methods designed to create PC-PC, PC-phone, phone-phone audio/video calls, or text-only Instant Messaging (IM) sessions over the Internet. Application sharing and whiteboard (An application that displays a window for two users to exchange information) can also be added to PC-PC sessions. Presence information is used to track the location of buddies (or contacts) for communication purposes. This information is available through the RTC Client API on a SIP registrar server.
The RTC Client API:
1.Supports multiparty phone-phone calls
2.Uses SIP-based signaling and presence communications
3.Integrates with the Microsoft Office RTC proxy and registrar server
4.Supports provisioning with ITSPs or third-party corporate-deployed servers
5.Integrates signals over IP and PSTN networks
I hope this will be useful for you.
Thanks,
Swamy Kunche

Problem with DAQmx and Real Time PCI-7041/6040E.

Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !

Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM

Fico interview questions and Real time tickets with resoving details

MODERATOR: Do not post (or request) email address or links to copyrighted or confidential information on these forums. If you do, the thread will be LOCKED and all points UNASSIGNED.
hi sap gurus
i have done sap-fico iam in job trails. can any body help me Fico interview questions and Real time tickets with resoving details
regards
prasad.v
Edited by: chinna prasad on Jun 5, 2008 4:10 PM

Hello Prasad,
Before attending interviews.....First you need to understand general things like CV writing, projects, sub modules etc., you should be gain knowledge on these concepts then you can move further.
1. CV 2.Projects 3.your strenths in sap (reading..reading...reading....practice...practice...practice)
2.you please interact with your friends who is on trails, then you can get more information like interview process, methodology, technical etc.,
I am sending some real time interview tech questions which will useful for you.
Questions:
1.When tickets are raised by end users who will give priority? After resolve the tickets who will close the status?
2.In real time at a time how many normal periods, special periods, MM periods we can open?
3.What is client dependant & Independent?
4.How to transport configuration settings from one client to another client or production client, which tools we can use for transport?
5.Why we donu2019t assign business area to company code?
6.What is the difference between General GL A/c, Control A/c, Reconciliation A/c & Offsetting A/c?
Answers:
1.The priority is generally decided by the Coordinator on the client side. After tickets are resolved, they will have to be closed by the coordinator on the customer site
2. In FI as many as you wants. In MM only 2 (current month + previous
3.Certain tables and customizations made in one client will affect the other clients also - then it is cross client i.e, client dependent. While if the changes made in one client has no impact on the other client - it is said to be client independent
4.Transports from one server to the other can be made with the help of transport requests. When a configuration is done the system generates a request number. First release the task and then release the request. Use TC-SE10 / SE09, SE09: workbench transport; SE10: customizing transport. But currently no such difference actually exists.
5.because in case of multiple company codes, same business area can be used across company codes. Business area is cross company code, means it is not confined to one company code thatu2019s why we don't assign BA to any of the company codes. It is client dependant, not company code dependant. We can pass values from one company code to any of the BA in that client.
6.General GL Account are those used for standard posting like for example Income and Expenses Accounts
- Control Account are basically used for reconciliation between modules like FI and CO, to ensure that both the modules are in sync.
- Reconciliation Account are those specific covering ADK (A-Assets, D-Customer, K-Vendor). For example a Customer Master would be mapped to a Bills Receivable Reconciliation Account and any transaction that needs to be posted are done against the customer code.
- Offsetting Account are used for variety of reasons and few examples are Intercompany Postings, at the time of Implementation when TB and Balance sheet are uploaded would be offsetted against a dummy account.
All the best.....dont forget and pl assign points if useful and if u have any querries pl revert back
thanks
Anil

Need SAP-HR Module wise Blue prints and Real time questions

Hi HR Team,
can u send me the OM issues and real time questions and any HR module Questions and Blue prints .pls if useful awarded points
my mail id is [email protected]

Hi HR Team,
can u send me the OM issues and real time questions and any HR module Questions and Blue prints .pls if useful awarded points
my mail id is [email protected]

Enabling the Active Dataguard and Real Time Apply

11.2.0.2 on AIX
I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right?
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?

I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;
The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right? Yes, It will be in both recovery / realtime + Read only mode, Also you can use
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?Yes. It will be in just recovery/real time mode.
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?It has multiple options based on startup type
For this example check link of Julian Dyke.
http://juliandyke.wordpress.com/2010/10/14/oracle-11gr2-active-data-guard/

Sharepoint 2013 server dropped off domain and readded

I My sharepoint 2013 server dropped off the domain (still trying to figure out why) so I added it back onto the domain. The problem now is alot of the services aren't showing under "Manage services on server", in fact I only have 7 services (Application
Discovery, Distributed Cache, Lotus Notes, Machine Translation, Foundation Timer, Powerpoint COnversion, Word Automation. I am able to navigate around my intranet site but I cannot access mysites or the userprofile service application.
Error when accessing userprofile service app:
Application error when access /_layouts/15/ManageUserProfileServiceApplication.aspx, Error=This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your
administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Do I need to rerun the configuration wizard?
Environment:
-Server 2008 R2
-Sharepoint 2013 Enterprise
-MS Sql 2008 R2 server
-Virtual machine (Vmware)

HI,As you said Its dropped off from domain meaning it already disconnected the connection from AD.Thats why UPA is not working.Once the server is added back to Domain,The UPA will not connect to automatically.So iwould suggest to create the UPA connections
again and crawl the Import.Check the below link on the issue with UPA.
http://expertsharepoint.blogspot.de/2014/03/user-profile-service-and-user-profile.html
http://expertsharepoint.blogspot.de/2014/03/user-profile-synchronization-service.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Sharepoint 2013 Workflow not available on Site created from Sharepoint 2013 Foundation Solution Template

If I create a template on SharePoint 2013 Foundation, then create a site on SharePoint Enterprise (or Office/365) fully configured to support SharePoint 2013 workflows. When I access the site through SharePoint Designer 2013, and attempt to create a workflow
SharePoint 2013 Workflows are not available -- you get message that SharePoint 2013 Workflow platform is not available because it is not configured on the server. This appears to be a bug in SharePoint Designer as the 2013 Workflows are available on the team
site on the same site collection. There is no reason that a site created from a SharePoint 2013 foundation template should have this restriction.   To make matters worse if you then save that site as a template on the SharePoint 2013 Enterprise (or
Office/365) system and create a new site from the that template you get the same issue.
Anyone know a workaround/fix to this issue.   Have imported the template into Visual Studio but I can not find any way in Visual Studio to enable SharePoint 2013 workflows.   A solution that involves Visual Studio import would work fine
for me.
Earllibby

Apparently you did not read my question very carefully.   The workflow manager is configured properly on this server and for the basic Team site in this site collection the full SharePoint 2013 workflows are available in SharePoint Designer 2013.
BUT they are not available on another site in the SAME SITE COLLECTION that was created from a solution template that was created on a SharePoint Foundation server.
Earllibby

On-premise SharePoint 2013 and SkyDrive Pro Sync Issue

Hi all,
I'm not sure if this is the correct forum between SharePoint and SkyDrive as the issue is related to an update on SkyDrive Pro.
premise SharePoint 2013 installation (migrated from 2010) and Office 2013 installed. SharePoint is patched up to the latest CU. Syncing documents from SharePoint worked fine until KB2817495 was installed. The syncing still seems to work but we cannot add
any new libraries, either directly from the browser using the "sync" button or adding the URL to "Sync a new library". I've tested it with an Office 365 account and the libraries add fine so I'm not sure whether it's a SkyDrive or SharePoint
issue. If I uninstall the update then I can successfully sync new libraries from our on-premise installation.
At this point the only solution I can see is to prevent that update from installing via WSUS.
Kind regards,
Rick

Hi
anuxps ,
Yammer already have Single Sign On with Office 365, but SharePoint Server for on-premise does not follow a 90-day release cycle and it won’t yet. Also we are looking for Yammer integration with on-premise
soon. There are improvements coming.
Reference:
http://social.technet.microsoft.com/Forums/en-US/a6ecdee4-ac28-4989-929b-0e6c9968732e/yammer-sharepoint-onprem-integration?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Independent 7 Year LabView (3.0-7.1) and Real-Time Programmer w/ Signal Analysis and Audio/Video/Imaging Background

I have been a LabView programmer since version 3.1 and now into version 7.1 - including the Real-Time platform. I also have developed database connectivity in Perl/CGI/HTML in conjunction with this experience.
I also have over a decade of experience in Audio, Video and Imaging technology as a systems designer and production engineer. I am currently a part-time employee and an independent contractor. My company name is The Oakland Group. I am available for both short-term full-time and long-term part-time projects.
I look forward to discussing any LabView project with you.
Tom Held
[email protected]
414-964-0518

Please see my attached resume.
Tom Held
Attachments:
resume-scada.pdf ‏43 KB

Getting video to play real time in an NTSC monitor question?

I’m trying to get video in my NTSC preview monitor to play real time. It will send a picture to the preview monitor but will not play real time even when timeline is rendered. I’m coming out of the back of my video card (ATI Radeon 9600) through a DVI cable to my HDTV monitor. Do I need a Firewire digital to analog converter box in order to see video in real time? I don’t want to use my camera as a pass through. Does FCE support a second monitor at all during editing?
Any info greatly appreciated!

Thank you so much for the reply! I just purchased a Firewire Datavideo DAC-6 DV to Analog Video Converter and it even has component out to the NTSC monitor. It will be here on Wednesday! Good to know I can run a preview monitor while editing. Thanks again for assisting me.

X121e randomly wake up from suspended status and real time clock error

Hi all
Previously I considered my x121e suffer from overheating issue and causes real time clock error (RTC). However, after more testing and investigation, I believe the problem is related to other hardware issues and I like to hear people opinion before sending the laptop back to Lenovo.
The machine goes into suspend status either pressing the power button or closing the lid from Windows7 (clean install) without problem. However, it would wake up itself randomly, "beep" twice and screen shows RTC and CMOS checksum error. This happen more often when I am holding the machine (i.e. some movement/vibration). I wonder:
- Is it the RTC battery problem, cause the RTC to wake up the machine?
- Other hardware failure?
The laptop has a clean OS installed/recovered. Latest 1.16 Bios installed. No USB or memory card attached. Ram replaced and not the cause.
Please advise
Howard

Hello,
I am unsure; you would have to contact Lenovo directly and find out how they handle this situation. They may want the ThinkPad X121e back so they can run thorough diagnostics on it, just in case the problem is something else. That way it gets fixed the first time.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to Create an Epic Rap Battle of History in After Effects (Compositing, VFX, Green Screen, Audio), or Fix Audio, Speed, and Real Time Problems

Hello. As a film project, I am creating an "Epic Rap Battle of History", a parody video of a popular series on YouTube. In my film/video, I would like to use compositing so that there will be two of one character in one shot. I have used Premiere Pro CC for the main character sequences, but when I imported this project in After Effects, there was no audio at all from the song, and the canvas displaying the composition was moving very slowly, at about 50% of the video's actual speed. Also, in the top right corner, it says, "Not Real Time", and displays something like 7.39/29.96. I have looked at different web pages, and nothing seems to work.
I would appreciate it if someone could explain how to fix this all up for me, or especially if someone who has had experience creating an Epic Rap Battle could actually list a step-by-step process on how to create one.
If this helps, I am a beginner to Adobe, and work on a iMac tower. Thank you for your feedback.

Start here to learn After Effects: http://adobe.ly/AE_basics

Is video conferencing and real-time communication available in an on-premise Sharepoint 2013 Server farm?

Similar Messages

Maybe you are looking for