Is VSTA 2012/2013 officially supported? Any documentation/samples?

Hi,
We are looking for replacement for APC SDK 7.1 that we are currently using.
I have found some downloads for "Visual Studio Tools for Applications" 2012 and 2013.
http://www.microsoft.com/en-ca/download/details.aspx?id=30668
http://www.microsoft.com/en-us/download/details.aspx?id=44212
Are they official products? Are they supported by Microsoft or anybody else?
I searched MSDN Subscription for VSTA 2012/2013 and nothing come up. I also searched msdn library for VSTA documentation and the only one available is v2.0 for Visual Studio 2008.
http://msdn.microsoft.com/en-CA/library/cc175562(v=vs.90).aspx
Is there any documentation in addition to VSTA Sample Host Integration.docx?
Is there any C# sample on how to integrate it to the app and how to bind it to the application object?
Thanks,
Anna.

"FAQ inr VSTA" presented by
Xiaoying Guo
https://social.msdn.microsoft.com/Forums/vstudio/en-US/68ca7a8d-b49e-48c9-96c0-f438ce66b74b/frequently-asked-questions-faq-in-vsta?forum=vsta

Similar Messages

Official Support for Multisite Behind SA520 Firewalls?

I'm at the beginning of a new multisite implementation with two sites. There are existing SA520 firewalls at each site. I have a UC540 and a UC560 with latest software packs and CCA 3.2(2).
I'd like to know if multisite is currently (April, 2013) officially supported by Cisco when the UC devices are behind SA520 firewalls and whether this is configurable using CCA 3.2(2).
I've done multisite in the past in an unsupported configuration via CLI and I'm hoping to go "by the book" as much as possible on this one. I can drop the SA520 firewalls if needed. I have a lot of support procedures built around the SA520 so I have some incentive to keep them in place but not at the expense of running an unsupported configuration.
Any help would be much appreciated.

Hello Jeffrey,
The way this will be configured depends upon the topology you go with. If you leave the SA520's in place, the VPN connection would be between the SA520's, and the UC500's would not be involved, and this would not be configured using CCA. This is supported, but just not thought the UC500's or CCA.
If you make the UC500's the edge devices, or put them in a DMZ with public IP addresses, then the multisite configuration in CCA can be used, and also is supported.
So, I guess it just depends on which way you want to go. But both topologies are supported by Cisco, but CCA will only be used (For the VPN configuration) if the UC500's are configured with Public IP addresses.
Thank you,
Darren

MacPro 5.1 - 6.1 2012 2013 purchase??

Hi all
I am looking to get my hands on a second hand or refurbished macPro 5.1 or 6.1 2012 2013.
If any one could point me in the direction of an outlet that shipps to austraia or in australia that will have the models in stock or can get the stock I would greatly appreciate the information please reply with the details.
kind regards
-adam

Have you checked this site? They are out of stock at the moment, but more should arrive soon:
http://store.apple.com/au/browse/home/specialdeals/mac

Snow leopard not supported any more? security updates for safari

Apparently the latest security updates for safari have been released for lion & mountain lion but not for 10.6. I have had some problems updating to lion so I'm still on snow leopard. Does this mean snow leopard is not officially supported any more? Not sure if this should be of concern to me. I would like at least the security related updates to be up to date on my machine.

Don't hold your breath.
With the possible exception of the odd critical security patch (like the recent Java ones) there are unlikely to be any further updates for Snow Leopard.

Is office 2010 officially supported on windows server 2012 R2

hello,
can someone tell me if office 2010 is officially supported on windows server 2012 R2 RDS?
This link only talks about Windows server 2012 not R2.
Thanks in advance.
Regards
Anthony

Hi Anthony,
I successfully installed Microsoft Office Professional Plus 2010 on Windows Server 2012 R2 before in my testing environment.
So yes, Office 2010 is supported on Windows Server 2012 R2.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

EXCHANGE SERVER 2013, WINDOWS 2012 R2 NOT SUPPORTED?

The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
That is the Error message I am receiving on installation. On multiple servers.
this is pulled from the Microsoft Exchange System Requirements page 4/19/2014
We don’t support the installation of Exchange 2013 on a computer that’s running in Windows Server Core mode. The computer must be running the full installation of Windows Server. If you want to install Exchange 2013 on a computer that’s running in Windows Server
Core mode, you must convert the server to a full installation of Windows Server by doing one of the following:
Windows Server 2008 R2 Reinstall Windows Server and select the
Full Installation option.
Windows Server 2012 R2 or Windows Server 2012 Convert your Windows Server Core mode server to a full installation by running the following command.
Copy
Install-WindowsFeature Server-Gui-Mgmt-Infra, Server-Gui-Shell -Restart
http://technet.microsoft.com/en-US/library/aa996719(v=exchg.150).aspx - Link to the Microsoft Resource page.
I Have not notices anyone else running into this thump, (yet)-. If you guys stubble upon anything similar, or have
any suggestions please let me know. Thanks!

Hi
Are you installing Exchange 2013 SP 1 ?
Windows Server 2012 R2 is supported only with Exchange 2013 SP1 or later
Management tools
One of the following:
Windows Server 2012 R2 Standard or Datacenter1
Windows Server 2012 Standard or Datacenter
Windows Server 2008 R2 Standard with SP1
Windows Server 2008 R2 Enterprise with SP1
Windows Server 2008 R2 Datacenter RTM or later
64-bit edition of Windows 8.12
64-bit edition of Windows 8
64-bit edition of Windows 7 with Service Pack 1
Kindly mark this as answer if found helpful. Thanks.
J.B.Patnaik

Which version of sql server 2012 or 2014 is best for sharepoint 2013.. Any excellent comparision available please let me know..

Which version of sql server 2012 or 2014 is best for sharepoint 2013.. Any excellent comparision available please let me know..i mean enterprise version BI version or standard version.. i just need a detailed comparison if available please thank you

As of right this very second, SQL Server 2014 is not supported. SharePoint 2013 supports:
One of the following:
The 64-bit edition of Microsoft SQL Server 2012.
The 64-bit edition of SQL Server 2008 R2 Service Pack 1
Hardware and software requirements for SharePoint 2013
Edit: I may be mistaken. It looks like the April 2014 CU adds support for SQL Server 2014. If this is the case generally going with the latest SQL Edition provides you with the latest SQL functionality. I'm not aware of any SharePoint features that would
make use of functionality that is new to SQL Server 2014 but this could change with a future service pack.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Is Windows Azure officially supported for Exchange 2013?

Though Exchange 2013 can be installed on Windows Azure, however can somebody help me in knowing that if its officially supported with it OR can live environment of Exchange be setup on Windows Azure?

Hinte is correct.
You can set up a Exchange 2013 lab in Azure. You may have seen that Henrik Walther has done just that:
http://www.msexchange.org/articles-tutorials/office-365/exchange-online/deploying-exchange-2013-hybrid-lab-environment-windows-azure-part1.html
But this is just for practice / training.
Besides lack of support, cost of sufficient resources to run E2K13 correctly would be greater than simply using O365 / Exchange Online.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Reports & Microsoft SQL Server 2012 Express LocalDB support policy

Hello,
Willing to move some databases into Microsoft SQL Server 2012 (2014) Express LocalDB, I have tryed to map some reports on that database.
Using OLE DB SQL Native Client (v11) and SAP CR RunTime SP10 (>SP9), I still have trouble when using this data source:
After drawing some simple reports (standard ones with 2-3 fields from the database):
- VS designer:
+ when "checking database" or "getting a preview" of the report, it always complains about missing tables.
+ when trying to "re-map" tables from one SQL Server 2012 Express LocalDB to another one it fails, complaining about not findind resources.
- Running application (.NET 4.0, 32 or 64-bits):
+ without any change to the report configuration: CR Viewer complains with multiple error codes (17, ...) that it cannot find the tables
+ trying to change the configured database from the report: CR VIewer complains with some more error codes
=> Is Microsoft SQL Server 2012 Express LocalDB now officially supported by CR ?
=> Is changing datasource/database configuraton during execution now officially supported by CR ?
Feel free to provide an any links / howto's / white paper about how managing Microsoft SQL Server 2012 Express LocalDB with SAP CR !
Many thanks in advance.
Regards.

Don,
I did not want you to think that I am not willing to change anything...
The issue is that LocalDB specs (http://msdn.microsoft.com/en-us/library/ms130822(v=sql.110).aspx) are not (seems not) fulfiled by what SAP APIs provide.
Following specs, I need to provide ADO DB/SQL Native Client v11 an "AttachDBFileName" property which, for LocalDB instance, is equal to the DatabaseName property (check below screenshot from MS Mgmt Studio connected to a SQL Server 2012 LocalDB instance).
Moreover, OLEDB discovery provide in CR 2013 UI this same list of "DatabaseName":
When connected, this same CR 2013 UI got the right "view" of connected "MDF-labelled" names:
Moreover, CR connected datasource properties also provide an "initial catalog" (databasename) value with that "MDF-labelled" name:
That is what I saw previously in API dumped objects and what I tryed to reproduce in my code:
As previously explained, after adding tables, I am also beeing able to add fields from those tables in my fresh-new report document:
It fikrst shows results in preview but as soon as I try to refresh / add some more fields / ask CR to "check database" / "change database source", the interface always complain about having "lost" objects:
Site note for Ludek Uher: CR 2013 StandaAlone fresh-new builded reports are not working neither using CR runtime SP10 when opening/updating that report..
So YES, I am OK to change whatever is required but please explain me what to use/put into the "crConnectioninfo.DatabaseName" property for a SQL Express 2012 LocalDB case.
Or leave it as is, LocalDB not being supported by CR ...
(all my reports & c# code are working well while using SQL Express 2012 "classic" (not localdb)).
Thanks again for your time.
Regards.

? Office 2013 to support Excel 2003 (XLS) spreadsheets containing VBA CommandBars references

Thanks in advance for reading this and offering any wisdom you have! I am not an expert in any of the following, so apologies if off base.
The basic problem is: I need to use Excel 2013 to support Excel 2003 (XLS) spreadsheets containing VBA 'CommandBars' references which don't seem to work in Excel 2013. Details below.
Most of our users are still using older desktop windows PCs and Office 2003! We are beginning to upgrade to laptops running Windows 8.1 with Office 2013. Of course, we IT technical people are using the new laptops first. These new laptops are
64 bit.
Years ago, someone did a lot of development with spreadsheets here in Excel 2003 file formats that automates many activities and routines. Now we with the new laptops are having to support this development using new machines.
There is a basic compatibility issue that appears when first opening these Excel 2003 files that have VBA code that I'll detail below; I seem able to get by that problem.
The current problem appears to be that the existing Excel 2003 VBA code has many references to: "For Each bar In Application.CommandBars". As I've learned, the Application.CommandBars VBA functionality is focused on older MS Office versions' menu
commands, but "...Starting from Office 2007 the Fluent UI is used instead." In other words, because MS Office isn't menu-driven beginning with version 2007 (uses 'the ribbon'), it appears that these references to: "For Each bar In Application.CommandBars"
create a basic incompatibility to opening these spreadsheets in Office 2013.
For a spreadsheet, after I resolve the issue detailed below and save it, when I reopen it I encounter error "Compile error: can't find project or library."
For example, the following code snippet:
Private Sub Workbook_Open()
For Each bar In Application.CommandBars
bar.Enabled = False
Next
results in: "Compile error: can't find project or library."
(Sorry, can't include images yet, I am not a VERIFIED USER of this forum yet.)
I went into VBE's menu: Tools>References and check for anything marked MISSING, which I deselected. But I am still receiving this error.
I don't want to get into changing the code a lot to support both Excel 2003 and 2013 (I am no VBA expert, just a dabbler).
And Microsoft officially says that Office 2003 is incompatible with Windows 8 although Application.CommandBars seem to be somewhat supported in Office 2013 .
Are you aware of a quick VBA workaround to get by this?
•I could comment out the validations, commands for: "For Each bar In Application.CommandBars" but then the spreadsheet code probably won't work for users using Office 2003.
Alternatives would be:
•Installing Office 2003 on my Win 8.1 64 bit laptop anyway, in spite of MS's saying incompatible, since this thread discusses at least one person has been able to use Office 2003
•Keeping one older PC with Office 2003 on it for us to support the old Office 2003 code until everyone upgrades their systems
Thanks
Basic compatibility issue that seems solvable:
Opening these spreadsheets displays this error:
Compile error:
The code in this project must be updated for use on 64-bit systems.
Please review and update Declare statements and then mark them with the PtrSafe attribute.
This seems resolvable by going into the VBA code and just adding element 'PtrSafe' where functions are declared; in other words, replacing VBA code "Declare Function" with "Declare PtrSafe Function" seems to get by this.

Hi Allan_L,
Please try the methods that provided above. And this is the forum to discuss questions and feedback for Microsoft Excel, your issue is related to Excel DEV, if you have further question, I recommend you post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Connecting Visual Studio 2008 to Team Foundation Server 2012/2013

I currently have many projects in VS 2008.
We are able to build and deliver all of the products to the production servers.
I want to connect VS2008 to VisualStudio.com so I can create an environment for Beta Testing with VisualStudio.com and Azure.
I have started from scratch:
Build a VMWare Virtual Machine - Windows 7 Ultimate
Added all of the Windows Updates
I installed Visual Studio 2008 - Professional
I updated Visual Studio 2008 to SP1
I have installed VS2008 Team Explorer
Unable to install GDR2 - with message "Visual Studio Team System 2008 Database Edition GDR does not apply, or is blocked by another condition on your system. '
I attempted to follow the "more information" instructions but there were no previous version to uninstall.
I attempted to login to Team Foundation Server (https://nnnnnn.visualstudio.com/DefaultCollection) and receive the "TF31002: Unable to connect to ....
I am able to login to the visualstudio.com site without any issue.
I have been working on this for days and no matter what I have read and tried, I cannot seem to get past this point.
I tried using a laptop I have and did the same steps as above with the same results.
It is obvious I am missing a step or that this process is longer possible.
Anyone have any suggestions?
Is there a "support" number that might help me resolve this?

Hi Zanyfrong,
Thanks for your post.
To using VS 2008 connect to TFS 2012/2013 or VSO, please install components follow the below order:
Visual Studio 2008
Visual Studio 2008 SP1
Team Explorer 2010
Visual Studio 2010 SP1
Visual Studio 2010 GDR
Microsoft MSSCCI Provider for Visual Studio 2010
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Installing DPM 2012 SP1 onto Server 2012 R2 (Compatible / Supported)?

Hi,
Can DPM 2012 SP1 be installed onto Server 2012 R2? i.e. is it compatible and also is it supported by Microsoft?
If so are there any official documents or links provided by Microsoft for this installation scenario?
I would have installed DPM 2012 R2 onto Server 2012 R2 but this is not possible due to DPM 2012 R2 not supporting Server 2008 protected servers!
Thanks,
Microsoft Partner

Hi,
DPM 2012 SP1 is not supported running on Windows server 2012 R2.
System requirements for System Center 2012 SP1 - DPM
http://technet.microsoft.com/en-us/library/jj651645.aspx
Can you tell me how many Windows 2008 servers you need to protect and what is preventing you from upgrading them to Windows 2008 R2 ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Adobe's site not showing Nvidia GTX 680 as officially supported

Hi everyone, ( July 9, 2012 )
Planning a new system, and I KNOW that the Nvidia GTX 680 is indeed working with PP CS6 and earlier, but I just checked Adobe's site, and there
is not even a hint of the Nvidia GTX 680 being a supported card.
Adobe link to officially supported cards: http://www.adobe.com/products/premiere/tech-specs.html
Any reason why ? Do they need elaborate testing on it, before they can "officially" add it to the list ?
I just want to make 100% certain the Nvidia 680 is indeed OK to purchase.
Thanks !
now I'll duck some bullets, because this question has prob been asked before.
Dave.

>need elaborate testing
Yes
The official list is ALWAYS behind new cards
http://blogs.adobe.com/premiereprotraining/2011/02/cuda-mercury-playback-engine-and-adobe- premiere-pro.html
Scroll down to Why are only some video cards supported?

Photoshop has detected graphics hardware that is not officially supported for 3d

From what I've read I thought 512 MB or vRAM would work with 3d. It used to anyhow. I get the pop up that says it's not officially supported for 3d, and has temporarily disabled 3d functionality.
I've tried setting the prefences under graphics processor settings to Basic, Normal, and Adavanced with no luck getting the 3d to work again. It was working fine before the last update to 13.1
I'm using a Mac Pro with 8 GB RAM, NVIDIA GeForce 8800 GT 512 MB, System 10.8.2
Using PS CS6 extended
Adobe Photoshop Version: 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:23, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1
Physical processor count: 8
Processor speed: 3200 MHz
Built-in memory: 8192 MB
Free memory: 4618 MB
Memory available to Photoshop: 7318 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Unavailable
OpenGL Version: 2.1
Video Rect Texture Size: 8192
OpenGL Memory: 444 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce 8800 GT OpenGL Engine
Display: 2
Display Depth: 32
Display Bounds: top=0, left=-2560, bottom=1600, right=0
Video Renderer ID: 16918024
Video Card Memory: 512 MB
Display: 1
Main Display
Display Depth: 32
Display Bounds: top=0, left=0, bottom=1600, right=2560
Video Renderer ID: 16918024
Video Card Memory: 512 MB
Serial number: Tryout Version
Application folder: /Applications/Adobe Photoshop CS6/
Photoshop scratch has async I/O enabled
Scratch volume(s):
Maczilla HD, 278.4G, 107.7G free
Required Plug-ins folder: /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Required/
Primary Plug-ins folder: /Applications/Adobe Photoshop CS6/Plug-ins/
Additional Plug-ins folder: not set
Anyone have any ideas, or maybe I'm missing something. Nothing like getting an update and it busting what used to work. Dang!

I can get into the 3d pref area, but not the pull down menu area at all. It's grey'd out now that I did the update.
I just find it weird that the card is on the approved list, and meets the requirments and used to work. But yeah this mac is a few years old at this point. I'm just hoping that someone at Adobe reads this and can shed some light. I'm hoping maybe there's a button I need to click on, or something cheaper then buying an entire new computer when I really don't think I need to. Photoshop has really bloated up!

I have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated

i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have also tried 4 different chargers both official apple and non official

i have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means

Is VSTA 2012/2013 officially supported? Any documentation/samples?

Similar Messages

Maybe you are looking for