Is Webcenter Sites able to access profiles from ATG Profile Repository?

Hi,
I have a two part question on WCS:
1) If I have users created in LDAP, can WCS use infromation regarding this users to do authentication in WCS? Can WCS use LDAP users profiles?
2) If I have ATG solution implemented for Commerce functionality, and ATG profile repository is used to create/store user profiles, can WCS connect to ATG Profile repository to use infromation regarding these users to do authentication in WCS?
I am just trying to learn WCS functionalities and WCS integration with ATG,, so please excuse me this question is a bit blunt.
Thanks

Hi,
Not out of the box, but this can be done through some plugins that are provided.
You can implement the SSO layer to plug in to the ATG LDAP repository fairly easily - have a look at the 3rd party software guide in the Sites docset for that.
As for the profile data, absolutely this can be done.  If the ATG profile repo is accessible programmatically, you can access it from within your site on Sites.  I'd use a system on Sites that gives me a MVC architecture then I'd have my login action query the remote system for the data.
If you just want it for targeting, you can look at using Sites Engage and implementing the datastore api to retrieve data from the ATG repo instead of forcing Sites to persist the profile data to the local visitor repository.
Good luck!
Tony

Similar Messages

  • HT204370 Why are movies excluded from iCloud?  They are the most expensive purchase from iTunes and just as valuable and important to be able to access anywhere from any device?

    They are the most expensive purchase from iTunes and just as valuable and important to be able to access anywhere from any device?  I find it so frustrating that first I had to purchase iWorks for my Mac, then I had to purchase it all over again for my IOS device so I could use iCloud, then I purchase thousands of dollars of movies and am not able to store them in the cloud, yet we have only purchased the rights to the songs no differently than we have the movies.  Why would they exclude movies from icloud?

    They are not part of icloud in all countries, becuase the movie industry in those copuntries does not allow Apple to offer this.

  • I have nearly 9,000 Images on my I Mac and I wish to move them over to a 2TB external  hard drive and still be able to access them from Aperture and or iPhoto?

    I have nearly 9,000 Images on my I Mac and I wish to move them over to a 2TB external  hard drive and still be able to access them from Aperture and or iPhoto. How is the best way of doing this?

    Here is how to do it with iPhoto:
    http://support.apple.com/kb/PH2506
    As for Aperture, you'll need to do a search on the support website yourself because the result is a download so I couldn't post a link - the instructions are in the user manual. I believe the settings are within Aperture's Preferences.

  • When I sync my iPod with iCloud and I delete pictures off of my iPod will I still be able to access them from iCloud?

    When I sync my iPod with iCloud and I delete pictures or other data off of my iPod will I still be able to access them from iCloud?

    - Syncing with iCloud does not move anything from the the iPod to iCloud. Some items like contacts, calendar and some app date gets synced to the cloud continuously.
    - If you backup to iCloud it backs up the photos in your iPOd's Camera Roll album. If you delete some of those photos and then backup the previous backup gets overwritten with the changes and thus you can't get them back.
    - You can get the last 30 days worth of phtos in the CamerRoll form your PhotoStream
    iOS: Importing personal photos and videos from iOS devices to your computer

  • If I buy Apple TV in a country where Netflix is not available, will I be able to access Netflix from my country where Netflix is available?

    Hey guys.
    I have an urgent question.
    I'm from Argentina where Netflix is available. I have an account.
    I have a friend who is in Spain right now, where Netflix is not yet available.
    I asked him to bring me an Apple TV 3 because it is much cheaper there. And I need to access Netflix from a Non Smart LCD I have.
    And he is leaving Spain in a couple of hours.
    He went to the Madrid's Apple Store where he was told that they didn't know if he could be able to use Netflix in Argentina from the Apple TV bought in Spain.
    If you look at Apple's Spanish site for the Apple TV, you can't see Netflix in the images: http://store.apple.com/es/buy-appletv/appletv
    But you can in the US site: https://www.apple.com/appletv/
    Do you know if I'll be able to access Netflix in Argentina (where Netflix is available) from an Apple TV bought in Spain (where Netflix is not available)? Is there some kind of regional lock from Apple TV?
    Thanks.

    It should be fine provided Netflix is available on AppleTV normally in Argentina - in the Settings menus there are a couple of location/country type settings - the unit has a universal power supply and apart from potentially a plug adapter for the power cord if needed it should work fine.
    AppleTv's are not region locked at all, you should be able to get all services available on an AppleTV sold in Argentina on one sold in Spain provided you configure the location info correctly.

  • WHCK - Not able to access Server from client machine

    Hi,
    Server is running in : \\testserver
    Domain : ns.local
    Client : testclient 
    Test Name : TDI filters and LSPs are not allowed
    When the above test is run from the server side, Test fails with the following error:
    Cause : Failed to Start the Task
    Cause : Zero files are copied when Trying to Copy From Path "\\testserver.ns.local\TaefBinaries\x64"....Failing the Task
    Failure : Failed to Start the Task "Copy TAEF Binaries"
    Cause : Failed to Copy File : "\\testserver.ns.local\TaefBinaries\x64" Dest : "C:\WLK\JobsWorkingDir\Tasks\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\"
    Cause : Cannot Find Pattern "\\testserver.ns.local\TaefBinaries\x64"
    From WttEa.log , it displays "The network path was not found". 
    CRunManager::ExecutionAgent: Working Dir C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1 
    CRunManager::ExecutionAgent: Saving RunXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttJobRun.Xml
    CRunManager::ExecutionAgent: Saving EaDataXML to file C:\WLK\JobsWorkingDir\JobRuns\WTTJobRun6A2E5AF3-8C3E-4425-9997-5B809CAC2BB1\WttEaData.Xml
    CRunManager::UserName : DTMShareUser
    CRunManager::Domain : TESTSERVER
    CRunManager::Password : Server2008,WTT5326ShareUser
    Build No Greater than 4000. This is a Windows Vista Machine
    Single User TS Enabled
    Comparing TESTSERVER testclient.ns.local 10
    Logon Netonly
    GetUserToken : Returns 0
    Error: 0x35, The network path was not found.   WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed   File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
    Line=1589
    Error: 0x80070035, The network path was not found.   (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) )   File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2232
    Retrying the log location creation 10 more times
    Error: 0x35, The network path was not found.   WTTCreateDirPAth : CreateDirectory \\testserver.ns.local\HCKLogs\EaFolderAccessCheck\CF82A2A5-E08D-49C7-A078-4BA1416F1AA1 Failed   File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\common\eautil\src\eautil.cpp
    Line=1589
    Error: 0x80070035, The network path was not found.   (Error ( status = 53 ) in call: WttCreateDirPath(lpszTemp) )   File=d:\wtt25\wtt25\sdktools\wtt\jobs\runtime\wttexecutionagent\eamanager\runmanager\src\runmanager.cpp Line=2240
    What could be the problem ??? What steps need to be done or checked further to proceed ??
    Could you please help why the client is not able to access Server ???
    Thanks.
    Regards,
    Pradeep VR

    Hi,
    Reason for this failure is that the test executable is not present in the HLK controller.
    It looks like a Microsoft issue. We have faced same type of problem for other tests also. Our problem gets fixed in HLK 10056.
    If you face the problem in current build also, then please log a bug to Microsoft.
    Thanks,
    Arpo

  • Hotmail works!? how long have we been able to access it from safari?

    Just organising a few things on my iPhone, Syncing a few photos and tiding a few things up. I synced my latest bookmark bar from my laptop and Hotmail was on it.
    I tried to access the hotmail website from my synced Hotmail bookmark bar on my iPhone for a laugh to see if I could log on because I could never do this before and had signed up to izymail last November so that I could link up Hotmail to my Mail App on my iPhone.
    Anyway, I logged on and Hotmail works fine now from my iPhone Safari web browser. How long has anyone been able to do this?
    It'll mean that i'll be able to check my email when I have no Wi-Fi signal or EDGE which was always a nightmare when I was out and about and needed to check email.

    In the past, when i've tried to log onto Hotmail through Safari on my iPhone - it would load after I entered my password and then just refresh the same page. Alot of users on the forum were complaining about the same problem back in November/December 2007.
    I haven't read any articles on Hotmail for months now appart from people signing up to izymail.
    So you think I should have always been able to access my free Hotmail account using Safari as long as I had W-Fi or EDGE Signal?

  • Could not able to access workbook from the favorites of User Menu

    Hi all,
    I have got a problem in accessing Workbook from the User menu (SAP GUI) Favorites.
    I added a workbook to my favorites but now when i double click on the Workbook from my USER MENU (SAP GUI),
    BEX is opening and the connection is also maintained but the workbook is not appearing in the BEX.
    I checked in SU53 and this is not related to any authorization issues.
    Could anyone help me in solving this issue and
    providing ?

    I can't aunderstand why it happens, but try adding the workbook to a role and assign the role to your user.
    Hope it helps.
    Regards

  • Employee user not able to access catalogs from EBP

    Hello Seniors,
    We are implementing SRM 4.0 with scenario SSP and CCM 2.0.
    Please note the landscape highlights:
    EBP and CCM component are mounted in the same client and same server.
    CAT and CES are also on same client.
    No XI in picture.
    Catalog upload has been done through CSV format only.
    Please note the activities I have completed:
    Cat_Manager assigned to /CCM/CATALOG_MANAGER role and profile generated.
    Did the customizing for CAT
    Did the customizing for CSE
    Activated the required services
    For the service srm_cse set the log on procedure as "log on data required".
    Maintained a service user "ccm_user" in anonymous log on data.
    Maintained "define external web serices" in SRM img->SRM ->SRM server ->Master data (Here i have a doubt which is explained later)
    Intialized CCM with report.
    Uploaded schema in the master catalog.
    Created supplier ID and catalog.
    Uploaded CSV file for Supplier catalog.
    Mapped Supplier catalog with master catalog
    Published Master cataog.
    maintained entry of master catalog in PPOMA_BBP.
    Now I logged on EBP home page with employee user.
    Went to application shop.
    My master catalog published in CCM component was present there with exact name.
    But when the employee user clicks on the particular catalog link to choose the items from , He is getting an error "" BSP exception: Access to URL /sap/bc/bsp/ccm/srm_cse is forbidden "".
    With this error message immediately the attention goes to the service srm_cse.But there I have maintained a SERVICE user by user ID ccm_user which is existing in SRM SU01.
    In the whole customizing explained above I have two weak points which I want to state now:
    1. The integrated call structure for my particular master catalog was copied from other catalog.
    There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
    But all the values for url, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
    Do the parameter names should come exactly as per sequence given in guide(In my case it's not so.)
    (If anybody wants to see screenshot for this point pl. give me personal ID.)
    2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
    But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion.
    now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
    But my catalog ID is present in external web services.
    Can point no. 1 and 2 are reasons of the failure to access the catalogs from EBP?
    If it is so then please tell me the procedure to recreate the integrated call structure with same catalog ID.
    Please excuse me for the length of the matter , but i have tried to give every relavant detail so that clarity should be max.
    Best Regards,
    dinesh
    [email protected]

    Hi Dinesh,
    Please see cooments below...
    1. The integrated call structure for my particular master catalog was copied from other catalog.
    There i am missing one sr. no. of 70 (ie after 60 , 80 is there).
    But all the values for url<b>[Adeoye]where did you get your url from? Go to SE80 --> BSP application --> /CCM/SRM_CSE --> Controller -->main.do and check the url</b>, ccm-user, password, sap-client, sap language, locale, catalogID are filled correctly with type as per config guide.
    Do the parameter names should come exactly as per sequence given in guide(In my case it's not so<b>.)[Adeoye] Yes i believe this should be in the satated sequence.</b>
    (If anybody wants to see screenshot for this point pl. give me personal ID.)
    2. I had deleted the entry of my particular master catalog from the external web services to correct the error stated in pt. no 1 .
    But when i tried to create an entry again with the same ID system gave me an error saying that the said catalog is marked for deletion. <b>[Adeoye] Save your deletion first, before trying to create it again.</b>
    now entry of this particular master catalog is present in table /CCM/D_CTLG_REQ with no x mark in active column.
    But my catalog ID is present in external web services.
    I also sent you a cookbook to help with this, hope this helps...
    BR,
    Adeoye

  • I am not able to access Itunes from I movie

    I cant see or access I tunes from I movie. Nor I photo. I am not able to add music or photos to my movie. What can be happening?

    Temporarily disable any security software on the computer and try again.
    If it works, contact whomever supports the security software for assistance on configuring it to not interfere with iTunes.

  • Not able to access schema from a Web Server

    I am not successful in using a schema from a web server. I am using j2sdk1.4.2_06, and JDOM-b10. I have been successful in accessing schema using a file path, but not with a web address. The server is Windows Server 2003, I create a virtual directory using IIS under Inetpub.
    Let the URL be: http://server/research_schema/client.xsd
    This would be accessible only on the intranet.
    Here is some XML:
    <client xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:noNamespaceSchemaLocation="http://server/research_schema/client.xsd">
    <execute matlab="false" commit="false" return_server_msg="false">
    <t1>
    <load_batch_data>
    <username>test</username>
    <password>test</password>
    <database>db</database>
    <get_next_batch>true</get_next_batch>
    </load_batch_data>
    </t1>
    </execute>
    </client>
      Here is the code that sets the parser to be validating, and sets the schema location, I am using JDOM:
    builder = new SAXBuilder("org.apache.xerces.parsers.SAXParser", true);
    builder.setFeature(
      "http://apache.org/xml/features/validation/schema",
      true);
    builder.setProperty(
       "http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation",
            "http://server/research_schema/client.xsd");
    doc = builder.build(source);The error I get is a JDOMException saying the client element is not found, but I know that the client element is there, after seeing the XML output to
    a file from the sender.
    I see many exmples on the internet using a URL for the schema location, and it is usually the internet and not just the intranet. So it does work for someone.
    I'd appreaciate any help.

    Steve, et. al.,
    My apologies for using this in lieu of email, but I have been searching and searching for the answer to your questions from last summer concerning the correct method for getting the local xsd file to be correctly accessed from the xml file when using JDOM to parse with validation..
    I did not see successful resolution of the thread from last summer, but this one seems closely related and suggests that you were either instructed to give up, or gave up on your own and went to the solution of placing the xsd file on a server.
    Maybe I've got my head screwed on wrong, but I, like you, would like to find a successful way to make xml processing work for a JWS-provisioned application the same as it would if I just sent the clients a big jar file and told them to unjar it to some convenient local directory. In that scenario xsi:noNamespaceSchemaLocation = "itsrighthere.xsd" works as expected.
    Can anyone tell us what the correct method of specification is in the JWS context?
    Thank you.

  • Not able to access database from a remote machine using SQL Server Management Studio

    Hi,
    I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
    I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
    The SQL Server log shows the message
    The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
    I get the below message in SSMS from remote machine.
    Details of error message are
    ===================================
    Cannot connect to DB_BOX.
    ===================================
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
    Server Name: DB_BOX
    Error Number: 64
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
       at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
       at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
       at System.Data.SqlClient.TdsParserStateObject.ReadByte()
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

    Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
    My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
    ALTER ENDPOINT [TSQL Default TCP]
    STATE=STARTED;
    Erland Sommarskog, SQL Server MVP, [email protected]
    This solves the problem. Thanks...

  • Not able to access files from Workspace Images and Static files

    Hi,
    We have just migrated our APEX Application from one server to another.
    All the functionality is working fine except the images or files which we are uploading
    in
    Shared Components -> Static Files
    Shared Components -> Images
    We are uloading Images in Shared Components -> Images but those are not getting displayed there.
    Similarly the files which we are uploaded in Shared Components -> Static Files are not accessible. If we
    try to download using download icon its showing blank screen.
    I am using some javascript files which i have uploaded into static files, but not able to refer them in page.
    Please someone guide us how to resolve the above problem.
    Thanks in advance.
    Thanks & Regards
    Sanjay
    Edited by: user11204334 on May 25, 2010 1:35 AM
    Edited by: user11204334 on May 25, 2010 3:45 AM

    Hello Sanjay,
    If you upload any static files such as IMAGES, FILES, or CSS you have to use the tags: #WORKSPACE_IMAGES# or #IMAGE_PREFIX# depending on your files location..
    then try something like htp.p ('<img src="#IMAGE_PREFIX#fileName.gif" />');
    And it should show the fileName.gif on your browser...
    I am not sure if i remember correctly, you can reference files to a specific application or to the whole application, if I am not mistaken..Correct me..
    Regards,
    Noel Alex Makumuli,
    Tanzania

  • Not able to access HTMLDB from another server running HTTP_SERVER

    Hi
    I had htmldb installed and running from dataabse server but then I moved APACHE server to another server. Here Apache is running from OEM 10g grid control
    I set up dad.conf and marvel.conf files for connection to htmldb server. Also I created marvel directory and copied images diretory from htmldb server to this Apache server marver directory. It did not work
    Here' the details from dads.conf file
    Alias /i/ "/opt/oracle/product/10.2.0_oem/oms10g/Apache/marvel/images/"
    <Location /pls/htmldb>
    SetHandler pls_handler
    Order allow,deny
    Allow from All
    AllowOverride None
    PlsqlDatabaseUsername htmldb_public_user
    PlsqlDatabasePassword @BfNvzBYH8alwoDCIEVVlTPg=
    PlsqlDatabaseConnectString ods1_dev.whq.ual.com TNSFormat
    PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
    PlsqlAuthenticationMode Basic
    PlsqlDocumentTablename wwv_flow_file_objects$
    PlsqlDocumentPath docs
    PlsqlDocumentProcedure wwv_flow_file_manager.process_download
    PlsqlPathAliasProcedure htmldb.wwpth_api_alias.process_download
    PlsqlDefaultPage htmldb
    </Location>
    Also I see following errors in Apache Log
    File does not exist : /opt/oracle/product/10.2.0_oem/oms10g/Apache/Apache/htdocs/portal/pls/htmldb
    Please help.
    Thanks
    Sunil

    In httpd.conf I have oracle_apache.conf file included
    In oracle_apche.conf I have <oracle home>/Apache/modplsql/conf/plsql.conf included
    And in plsql.conf I have
    <oracle home>/Apache/modplsql/conf/dads.conf file included.
    http_server is running and did not give any errors during startup

  • My computer wont open my Itunes even though I've been able to access it from the same computer countless times before. What do I do?

    I cant get my computer to open my Itunes account either from the shortcut on my desktop or from the start menu. I've used this account hundreds of times before and don't know how to get to my Itunes library or even to the store. What do I do?

    Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Maybe you are looking for