Is WebI 2.7.5 compatible with Windows 2003 Server?

Currently have WebI 2.7.5 installed on a Windows 2000 Server and working fine.
Is WebI 2.7.5 compatible with a Windows 2003 Server?
Thank you.

Hi Craig,
- Not supported means that particular version of Operating System is officially not tested (Product Group has not tested any report with that version) i.e. it may or may not work at users end.
- If it woks at your end and you will get some issues (like error message or other server related issues) then BO support will not able to assist you as the version of OS which you are using is not officially tested at BOu2019s end.
Regards,
Deepti Bajpai

Similar Messages

Is Crystal RAS 9 compatible with Windows 2003 server?

We just upgraded out test RAS 9 server with Windows 2003 OS, and now the Crystal Report Application Server service won't start. We're getting a 1053 error. Is Crystal RAS 9 compatible with Windows 2003 server?

I do not believe 6X is supported in a 64 bit environment.
IF you are doing a fresh install on a different server, it should be easy to migrate your applications using the migration wizard in EAS. You can migrate applications, security everything except data. TO do that the easiest way is to export it and import into the application on the ner server.

Which Versions of SQL are compatible with windows 2003 server?

I just purchased SQL 2014 standard and tried to install on my Windows 2003 standard R2 VM server. It will not install and now I'm finding some places on the internet that say it's not compatible????
Is this true?
And if so what version of SQL can I install on my windows 2003 standard R2 VM server???

Hello,
You can install SQL Server 2008 R2 or earlier versions of SQL Server only on a Windows Server 2003 R2 computer.
SQL Server 2008 and SQL Server 2008 R2 can be installed on Windows Server 2003 R2 if you apply SP2 for Windows Server 2003 R2.
Meanwhile SQL Server 2005 requires Windows Server 2003 R2 Service Pack 1.
SQL Server 2000 can be installed on Windows Server 2003 R2 with no service pack.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Is BPC 7.0 compatible with Windows Terminal Server 2008?

Is BPC 7.0 compatible with Windows Terminal Server 2008? We are having printing issues when on WTS 2003.

BPC 7.0M SP08 was released on September 1st and now supports the client install on both Server 2008 and Windows 7 so yes, you should be able to use terminal server in Windows 2008 if you install SP08. It also has limited support for Office 2010, full support will come with SP09. SAP Note 1490544 is the central SP08 note, and 1504400 is the download note.
-Brian

Is Apps compatible with Windows Terminal Server

Hi
Is Apps (any version but most importantly 11i) and for that matter the Database compatible with Windows Terminal Server? I am working with a company who are trying to determine if their IT strategy with Oracle is watertight moving forward, and we have early indications that the answer to the above, is 'No', but it would be nice to have a definitive answer... Anyone know of any resources that I can look at to obtain the above?
Thanks and Best Regards
Toby Hazlewood

No. This is not supported
Rajesh Alex

IDES 46E with windows 2003 server Installation errors..

Hi,
Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
1.Windows 2003 Server
2.JDK.142
3.Oracle 9.0.2 with 7 patch
4.IDES 46E
Installed successfully Database and SAP but while exporting data in to tables then getting errors.
Thanks in advance..
Sreedhar

Hi GreetZ,
I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
Thanks for your replies..
Sreedhar

Challenges with the TREX Stack 14 with Windows 2003 Server

Hi
I have been struggling with the TREX installation on Windows 2003 server and are note able to get the green icon for the HTTP server.
I have been searching this Forum and seen a lot of topics on this issue, but unfortunately I am not able to solve it.
On my server I have installed the following components:
EP stack 14
SAP R/3
SAP ITS
If anyone have any ideas of how to solve my case - I will be very pleased
Regards
Kay-Arne S. Aarlie

Hi
We have managed to solve this issue
First i set the security settings for my trex_instance folder "C:\usr\sap\trex_06". Here i added the user IWAM_"MyHost" which is the "Launch IIS Process Account". Gave it the permissions for "Read & Execute, List Folder Content, Read" and then hit the button "Advanced" - selected the user once more and "Apply" - "OK" - "OK".
In the IIS and its properties for Web Sites and Services i set the checkbox for "Run WWW service in IIS 5.0 isolation mode".
Restarted the IIS and the TREX HTTPServer went green and I was also able to use the ITS.
Regards
Kay-Arne

How to install 11.5.10 on VMWare with Windows 2003 Server?

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

Need help on installing 11.5.10 on VMWare which runs Windows 2003 Server.
I've XP Pro laptop with 2GB RAM and 80GB HDD and external HD with 250GB. Gathered all required s/w for installation.
The Win 2003 Server VMWare is sitting on the external HD. I want to install pre-req s/w along with 11.5.10 on the VMWare.
(1) How do I make the laptop's CD drive and HD visible to the VMWare?
(2) Can I use the XP laptop HD as staging area and install on VMWare on external HD?
(3) What are the disadvantages/risks of using the external HD for both staging and actual installation?
Any help is appreciated.
FYI - we already have an Oralce 11.5.9 on VMWare. All services are up and running. Able to logon to SQL*Plus and EBS home page. The issue is, we are not able to connect to this Oralce VMWare image from other VMWare image(Siebel), ie, if we do a telnet to oracle vmware image connection establishes and closes immediately. No clue on why this is happening. But this is not happening when we did telnet from a vmware image(plain win 2003 server) that does not have Siebel. All vmware images work fine individually.
Any inputs?
Thx,
Jags

DLU with Windows 2003 server

I am going to be blustery only to provide you with the most info as
possible.
I have setup a Windows 2003 server for terminal services. Installed the
latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
zfdagent.msi from zfd4.01.ir7.
The setup is similar to any WindowsXP machine and I have done this a
thousand times. I have verified that the DLU policy set for the container
includes a DLU for Windows 2000 and Windows 2000 Terminal Services. Okay I
should be able to login and have zenworks create a local users acount but
it does not.
Here are the differences that may effect the proper operation of desktop
management:
a. I have this terminal server setup as a member server in our AD domain -
only to connect to the TS License Manager.
b. I have setup the Netware client location policy | login profile |
Windows Tab | to login in to the local Win2k3 server NOT the domain - and
of course the username field is empty.
c. Then I install the ZfdAgent.msi - when the intsaller gets to the
MiddleTier section - I usally click next and ignore this area, however
this time around the installer will not continue unless I enter an IP
address into the Middle Tier server field.
Other than the above - fairly standard install.
Any help appreciated.
Regards
Ross.

> I have setup a Windows 2003 server for terminal services. Installed the
> latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
> zfdagent.msi from zfd4.01.ir7.
Windows 2003 is not supported with ZfD4.x.
You must use at least the Agent from Zen 6.5.
Regards
Rolf Lidvall
Swedish Radio (Ltd)

How to setup SMBX client for work with Windows 2003 server's shared folders?

Dear community,
Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
How should I set up SMBX? Is there manual?
I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
Thank you in advance

Hi,
Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Manual steps to clear the records.
Dnsmgmt.msc [Dns Management]
A.Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
B.Expand the forward lookup zones\domain.com folder
i.Delete Host(A) records of dc’s which are non-existant.
ii.Correct the NameServer (NS) records
iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
· Dssite.msc [Sites and Services]
A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.Delete incorrect subnet configurations [Sites\Subnets]
C.Delete incorrect site links [Sites\IP]
· Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
· Force replication – ‘repadmin /syncall’

Authentication with Windows 2003 server

Hi there,
I am looking for achieve this task. I would like to know How I could authenticate users accesing by my wireless network? I mean in windows 2003 server. They must type their username and password. I want to restricted users which are not on the list to access by my wireless network. I know that in windows 2000 I could use radius server. Could I use it here?.
Also, I guess that I have to allow these "new users" in AD.
I am looking forward to read helpfull information here and of course I will give it a rate (points)
Any ideas are welcome.
Thanks
Wladimir

Same thing for 2003, it is called IAS (Internet Authentication Service).
http://www.microsoft.com/technet/network/ias/default.mspx
Basically you will set up IAS with a RADIUS Client which would be your wireless access point(s). Then you will set up a remote access policy which will define how connections are authorized or rejected (windows groups, protocols etc.). Don't forget to register IAS with active directory.

Oracle 9i R1 application server With Windows 2003 server

Hi all,
I am Getting error (Web Forms can install only Windows NT/2000) When installing Oracle 9i R1 application server in Windows 2003 SP1.
is any specific setting or workarounds available to install in Windows 2003 Server?.
Abk

setup.exe -ignore sysprereqs this may work because it will detect that you dont have the appropiated OS, but it will ignore under your responsability and keep installing.
Also you may try to modify the oraparam.ini in the install folder, and add some lines for the Windows version that you have, but this is more difficult, because you should use the exact name of the Version in order to pass this check.
Regards.
Edited by: Roberto Barrera on Jan 22, 2009 10:02 AM

Oracle with Windows 2003 server

Hi all,
I am using oracle 10g /windows 2003 Server with latest patches, the problem is whenever i restart the server instance does not start automatically , i have to start the instance manually.
how could i troubleshoot the problem , oracle not generating any error log for this, there is no information in alertlog.
when i chek the db service in services.msc it said , service started and automatic.
Thanks in advance
Salai Thenagan Jayavelu

go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
Anil Malkai

Bootcamp with Windows 2003 Server SP2

First of all I've got a bootcamp installation of Windows 2003 Server SP2 on my Mac Mini 2Ghz Core Duo, but until now I can't get the following:
- installation of Bootcamp software in Windows
- drivers for video and bluetooth
If some one can give me help on getting the correct software/drivers for this.
Already thanks.
Robbert

go to services window and set all your Oracle services to automatic instead of manual. this will start your database automatically rather you start it manually
Anil Malkai

CE Embedded 10.0 Compatible with Windows 2003 X64

Post Author: [email protected]
CA Forum: Deployment
Hi all,
I have Windows 2003 enterprise X64 SP1. Crystal Reports installed and runs fine. I installed CE embedded 10 but RAS Server can not run fine. It stops after i start it a few minutes. It keeps crashing with "faulting application crystalras.exe".
Can you help me resolve this proble? Is this a compatibility issue? I have disabled DEP on this System.
Thanks for your help

Post Author: ejthunder
CA Forum: Deployment
Hi
Crystal Reports 10 and CE10Embedded are not supported on 64 bit systems. CR10 and ce10Embedded will be reaching end of support soon so it is unlikely that BOBJ will "update" this older product to run on 64 bit systems.
Very few CR or BOBJ products are supported on 64 bit systems.
Here's the link to the Supported Platforms doc for CR10:http://support.businessobjects.com/communityCS/TechnicalPapers/cr10_supported_platforms.pdf
It is unlikely you'll be able to resolve this issue.
EJ

Is WebI 2.7.5 compatible with Windows 2003 Server?

Similar Messages

Maybe you are looking for