Is Wily Introscope a requirement with Solman 7 ehp1

We are finishing and upgrade from 3.2 to 7 EHP1.
Due to limited system capacity we have not installed the Wily Introscope product.  At this time we were not planning on using its functionality.  We are wanting to keep the basic functionality of solman 3.2 plus add the MOPZ piece.
I'm using the solman_setup tcode to go through the basic config wizard now.  I've reached the Landscape Data step where it is asking for the Wily Introscope info.  Since it doen't exist, can I bypass this step?
Thanks for your advice.
Laurie McGinley

Thanks Jarad,
That is what I thought (it isn't required), but needed to double check before I bypassed that bit of the setup.
Appreciate the quick response too!
Laurie

Similar Messages

  • Wily Introscope for SOLMAN 7.1

    Hi All,
    We are configuring SAP Solution Manager 7.1
    I have few doubts regarding Wily Introscope.
    1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
    2. Is it installed already with SOLMAN or need to be installed manually?
    3. I need details about licensing policy of Wily Introscope.
    4. If it is necessary to install please provide suitable link for installing it.
    and I have one more question.
    We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
    Shall we proceed with warning. or it needs to be fully performed without warning.
    Please guide us.
    Thanks & Regards,
    Ishan

    Ishan trying to answer all your doubts:
    1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
    If you need to implement RCA then only Wily Introscope is required.
    2. Is it installed already with SOLMAN or need to be installed manually?
    It has to be installed manually..Just follow the standard guide..
    3. I need details about licensing policy of Wily Introscope.
    Good Question..I think there should be someone in your orgnisation who looks after the licencing..Ask him to give  a call to SAP..
    4. If it is necessary to install please provide suitable link for installing it.
    Follow this link :
    http://www.scribd.com/doc/36673011/Wily-Intro-Scope-8-Installation-Guide
    Thanks & Regards,
    Joydeep

  • J2ee Can't start after JDK upgrade on system with Wily Introscope

    Hello All,
    For one of our portal server java patching is done from java 1.4.2.22 to java 1.4.2.25. And on this server Wily Introscope is installed.As per SAP when ever we upgrade java we need to re-create "AutoProbeConnector.jar" and update the JAVA VM parameters in configtool.
    I know the procedure to re-create "AutoProbeConnector.jar" if the Introscope agent is installed manually .
    Below are the steps to be followed to re-create if it is manual type.
    i)Re-create the AutoProbeConnector.jar file
    >wily>connector
    java -jar CreateAutoProbeConnector.jar -jvm /opt/java1.4 -output
    AutoProbeConnector.jar
    Output file AutoProbeConnector.jar created.
    ii)Setting Java vm parameters through configtool.
    Xbootclasspath/p:/usr/sap/ccms/wily/connectors/AutoProbeConnector.jar:/usr/sap/ccms/wily/Agent.jar
    Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
    -Dcom.wily.introscope.agent.agentName=<AgentName>
    But my systems Introscope agent is created automatically by SDM agent.if this is the case we need to re-execute the Introscope agent setup again to re-create the AutoProbeConnector.jar file.
    Can you any one tell me the procedure to do this activity, if possible with steps and the paths to be followed.
    Classpath parameter file which says it is installed automatically.
    ID27689350.JavaParameters=-Xbootclasspath/p:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/connec
    tors/AutoProbeConnector.jar:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.2.3.0-2008-08-11/wily/Agent.jar -Dcom.wily.i
    ntroscope.agent.agentName=BPD_JC02_server0 -Dcom.wily.introscope.agentProfile=/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAG
    ENT.7.2.3.0-2008-08-11/wily/IntroscopeAgent.profile -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORB
    Proxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Djco
    .jarm=1 -Dsun.io.useCanonCaches=false -Djava.awt.headless=true -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc -XX:PrintGCDetails -XX:PrintGCTimeStamps -XX:+UseParNewGC -Xms2048M -X
    X:NewSize=320M -XX:NewSize=320M -XX:HandlePromotionFailure -XX:PrintClassHistogram -XX:HeapDumpOnOutOfMemoryError -XX:DisableExplicitGC -XX:MaxPermSize=256M -XX:PermSize=256
    M -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -Drdbms.driverLocation=/oracle/BPD/920_64/jdbc/lib/classes12.jar -Dsys.global.dir=/usr/sap/BPD/SYS/global/

    Hello Jansi,
    Thanks for the update.
    I have gone through the document, and currently i require to update the Introscope Agent via SMD.
    In the document it is mentioned as the navigation
    Launch the Introscope Setup application: Diagnostics Setup > Managed Systems>Introscope Agent.
    These are the below doubts i have.
    1>How should i enter to "Launch the Introscope setup application"
    2>and then followed by Diagnostics setup.
    Kindly help me in detailed navigation, for example to which server i need to login(is it the Enterprise Manager server ?)
    Awaiting your reply.
    best Regards
    Rakesh

  • Solman E2E diagnostics and Wily Introscope.

    Does anybody have any time scales for setting up Solman Diagnostcis and Wily Introscope. I have a quote for this work and would like peoples past experience of time scales for this.
    I have a 3 system landscape PRD, QUA, DEV and obviously SOLMAN.
    I need  to set up the SMD agents on each server involved and install the required Wily components

    HI,
    If you have downloaded all the necessary s/w then you complete the E2E RCA setup in 1 day for one system(including buffers)  including Wily.
    E2E RCA config, can be completed as part of solman_setup. Once you have completed your initial and basic setup, solman is ready for managed system config.
    I would recommend following timeline including buffer
    two - three  days for Basic configuration and initial configuration.
    Installation of SMD takes less than 20 mins/ host. Wily installation also should not take more than an hour
    Managed system config - this depends on which application are you configuring. in case of SAP application, you should be able to finish one SID in one day (including buffer)
    BR,
    Shyam

  • Wily introscope issue after System refresh in solman 7.1 Sp11

    Hello experts,
    Unable to remove old Production wily in quality system.
    An new wily has installed in development box but when i run Solman_setup -> basis configuration ->cofig wily
    Unable to unassign or delete old wily introscope
    Thanks ,
    Rahul Yedapally

    Hi Rahul,
    Check in expert mode , diagnostic agent of development system should appear in quality SMD agent administration as you are assigning DEV wily to SOLMAN QUA.
    and all so make sure RFCs WEBADMIN , SOLMANDIAG and
    NONE are working fine in SOLMAN.
    Thanks,
    Prakash Reddy Maram

  • SOLMAN SMD Wily Introscope

    Hi!
    Has some one experience working with Wily Introscope 8.0?
    I use currently the version 7.2 and would like to upgrade this version to Wily Introscope 8.0.
    When I do so I cannot install and run Wily Introscope 8.0.
    Any helpful information will be very appreciated!
    regards
    Axel Schulze

    Hi Axel
    I am planning to un-install my current wily 7.2 and plannign to install 8.0, can you let me know if you have already completed upgrading and also can you send me details on the upgrade.
    Thanks
    Reddy

  • SOLMAN SMD Wily Introscope: no dashboards are available

    Hi!
    I would like to use the SAP SMD functions and Wily Introscope 8.0
    I am on SAP SOLMAN 7.0 EhP1.
    The problem I have: when I start Wily Introscope no dashboards are available.
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Axel

    You might have already checked the SAP Note 797147 and   installation guide for Wily I 8.0 at
    http://service.sap.com/instguides -> Installation & Upgrade Guides -> SAP Components -> SAP Solution Manager -> Release 7.0 -> Wily Introscope 8.0 - Installation Guide
    From the installation guide could you confirm section ..."Check That Introscope Is Running Properly"
    Also confirm you have set Java VM Parameters...
    I think you need to check the Installation guide thoroughly.
    Let us know if you have any error log or something....
    All the best.

  • SABRIX/JBOSS monitoring with Solution Manager and Wily Introscope

    Reading SCN discussions it is not quite clear to me if an extra (Wily) license is needed for monitoring SABRIX/JBOSS with Solution Manager and Wily Introscope. Does someone have experience in this area what exact to do?

    Hi GSAP,
    Please check this pdf file:
    Wily Introscope a CA Product- Utility that Comes with Solution Manager Specifically for Java Monitoring
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50973df5-e1d1-2c10-cf89-c177fbfd7e65?QuickLink=index&…
    Thanks
    Vikram

  • Error while installing Wily Introscope

    Hi All,
    I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
    1. Installation and Setup of SAP Solution Manager Server:
                   upgrading SAP Solution Manager Diagnostics (SMD) package
                   running Diagnostic setup wizard
    everything went successful.
    in the next step of wily introscope installation i have followed the below steps:
    2. installing CA Wily Introscope
               I.   Download Third-Party External Component Package from CA Wily
               II.   elected Platform Independent Introscope Installer
               III.  Extracted the Introscope Installer
              IV. Added the External Component Package
              V. Started the Installer
              VI. Verified the Installation
              VII.Installed the SAP Management Modules
             VIII.Ran the Enterprise Manager from OS level (AIX)
              IX. Checked That Introscope Is Running Properly
              X.  Extracted the Introscope Agent
              XI.  Created an AutoProbe Connector
             XII.  Activated the Agent: Setting up Java VM Parameters -
    here I am facing the issue
    in the installation manual it has been given to add the below java parameters to server node:
    -Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
    -Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
    -Dcom.wily.introscope.agent.agentName=<AgentName>
    i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
    without being added the above parameters " the agent will not start".
    please help me in this.
    thanks in advance
    Mohan K

    Mohan,
    I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
    If I delete the 3 lines that have wily in it, it starts OK.
    How did you resolve this problem. Please let me know in detail.
    Thank you.
    Ravi

  • Extend Wily Introscope in Solution Manager

    Hello, Could I monitor other non SAP solutions in Solution Manager?
    I need to integrate all systems that are intended for monitoring (SAP
    and non SAP systems) to Solution Manager
    What is the scope of Wily Introscope in Solution Manager? Is the scope
    only with SAP products or I could extend Introscope's capabilities to
    other products?
    Thanks for your help
    Best regards
    Edgar Rafael Escobar Molina

    What is the scope of Wily Introscope in Solution Manager? Is the scope
    only with SAP products or I could extend Introscope's capabilities to
    other products?
    The Introscope coming with SolMan is only a part of the full Introscope suite. It contains only those applications necessary to monitor SAP systems. For other non-SAP systems you would need different agents which are not delivered and must be purchased separately. I´m also not sure if the Solman license permits the usage of those agents in non-SAP environments.
    Markus

  • Error while installing wily introscope 9.1.5.0

    Dear Gurus,
    While i tried to install the wily introscope 9.1.5.0, it ends with below error. please guide me to install.
    Invalid External Component Package Specified
    The specified package, /oracle/stage1/willy/osgiPackages.v9.1.5.0.unix.tar, is not the expected version. This Introscope installer expects version 9.1.5.0 of the external components package.
    Edit the responsefile so that the externalComponentPackage property refers to version 9.1.5.0 of the external components package, then rerun the silent installer.
    Balaji

    Hi Divyanshu,
    i copied the downloaded files in that stage directory and install it.
    i used 797147 - Introscope Installation for SAP Customers for downloading the required setup files and for externel package is used Index of /ips/osgi/introscope_9.1.5.0
    Balaji

  • Problem Wily Introscope Installation!

    Hi,
    I can not install on the server of the Solution Manager Wily Introscope ENTPR MGR 8 -> AIX 64bit 5.3 - java version "1.4.2"
    Java (TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
    Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20061124 (SR7) (JIT enabled: jitc)
    Used files are:
    SAPISEM8SP01_00-10007374.SAR
    osgiPackages.v1.1.unix.tar
    eula.txt
    Can you help?
    Best Regards.

    Hi,
    I installed the EM as explained Inst.Guide_Introscope Ver.8 for SAP
    using the files:
    SAPISEM8SP01_00-10007374.SAR (introscope8.1.0.0aix64SAP.bin)
    SAPISMM8SP01_00-10007429.SAR (management modules)
    Then I deploy with SDM the ISAGENTSMD801_01-10007435.SCA.
    Then I launched SOLMAN_SETUP:
    Initial Configuration -> ok (green)
    Basic Configuration -> ok (green)
    Managed System Configuration select the stack of hava Solman and click on "Configure System", Diagnostics Prerequisites are ok.
    In step 2 "Manual Configuration":
    -Install Diagnostics Agent (it was previously done by SDM)
    -Assign Diagnostc Agent -> Open URL -> Agent Administrator
    The problem arises at this point if you click on "Show offline agents" list is empty!
    Then I also tried to install the Wily Introscope Agent at hand but might as well not start.
    Can you help?
    My Solution Manager has been upgraded to 'EHP1 on AIX 5L with JVM:
    Java VM version: J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20090307 (SR13) (JIT enabled: jitc)
    Java VM vendor: Classic VM (IBM Corporation)
    java vm type: <default>
    java vm cpu: ppc64
    Regards.
    Diego.

  • Wily Introscope Dashboard cannot be started: Silverlight Error 2104

    Dear Gurus,
    we have installed a DualStack SolMan 7.0 Ehp1 SPS23 on AIX/Oracle.
    Diagonstics and WilyEM 8.2 is installed and running well, Data from Agetens SMD7.11 and IntroscopeBytecodeAgents data are displayed also in Wily Introscope Webview  - Investigator tab.
    Silverlight 4 is installed since last May.
    Last week the regular Microsoft-Patching did on our FrontendWorkstations (WinXP SP3) with IE7 
    Additionally there was an upgrade of our SolMan Operating-System drom AIX5.3 to AIX6.1
    During this update also an JAVA 1.5 was newely installed for WilyEM, and the parameter " "the VM to use for the next launch" in the lax-file points to this Java-Version:    java full version "J2RE 1.5.0 IBM AIX build pap64dev-20091106a (SR11 )"
    But today we recognized - after sucessfully start of Wily EM WebView - that there is a problem when we try to select one of the prepared Dashboards from SAP and press the "View"-Button:
    We get an ErrorMessageBox from IE whichs saids:
    "Silverlight error:"
    "Error Type:  InitializeError"
    ErrorMessage:2104"
    and no Dashboard comes up.  
    The same Error occours when we use antoher Browser ?
    Can anybody please help ?
    What could be the reason or solution for this kind of error ?
    Thanks a lot !
    Stephan

    Dear Mateus,
    unfortunately I wasn't able to use your workaround successfully:
    Even when I mark the "Consoile"-Tab and press the "Refreh"-Button to reload the Page, i still get the same Error-Messages...
    Are there newer/other fixes available to solve this problem ?
    Which fix do you mean exactly ?   We currently run following version of WilyEM / WebView (from IntroscopeEMWebView.log)
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView Release 8.2.2.0 (Build 476364)
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Java VM version "IBM J9 VM 1.5.0" from IBM Corporation
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Using Introscope installation at: /usr/sap/ccms/wilyintroscope/.
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] CA Wily Introscope(R) Version 8.2
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Copyright (c) 2010 CA. All Rights Reserved.
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope(R) is a registered trademark of CA.
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Starting Introscope WebView...
    10/22/10 10:54:23 AM GMT+01:00 [INFO] [WebView] Introscope WebView started.
    10/22/10 10:54:27 AM GMT+01:00 [INFO] [WebView.Login] Successfully logged in user "WilyWebView"
    10/23/10 11:08:07 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
    org.apache.xml.dtm.DTMManager
    10/23/10 11:08:18 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
    org.apache.xml.dtm.DTMManager
    10/23/10 11:12:19 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
    org.apache.xml.dtm.DTMManager
    10/23/10 11:12:34 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
    org.apache.xml.dtm.DTMManager
    10/23/10 11:12:58 AM GMT+01:00 [ERROR] [WebView] java.lang.ClassCastException: org.apache.xml.dtm.ref.DTMManagerDefault incompatible with
    org.apache.xml.dtm.DTMManager
    Thanks,
    Stephan

  • Wily Introscope on two server nodes - are there two connectors necessary?

    Dear all,
    we' ve installed Wily Introscope on our portal which has two java server nodes. As I' ve read in SDN every Wily agent on a server has his own name, here ABC_Portal_server0 and ABC_Portal_server1.
    In section 4 of the Wily Introscope installation manual the creation of the AutoProbe connector is described. Do we have to create two AutoProbe connector files (one for each agent) or only one for both agents?
    Thank you for your suggestions.
    Best regards
    Martin Röhr

    Hi Achim,
    According to my knowledge, there are no known problems with a "required Extended Protection" / "Always On" / "Livelink Server" combination.
    Extended Protection helps to prevent an authentication relay attack by using service binding and channel binding. We need to note that when Extended Protection is set to
    Required, only connections from protected applications on protected operating systems are accepted. This setting is the most secure but connections from operating systems or applications that do not support Extended Protection will not be able
    to connect to SQL Server. For more details, please review the following article.
    Connect to the Database Engine Using Extended Protection
    https://msdn.microsoft.com/en-us/library/ff487261(v=sql.110).aspx
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • Wily Introscope Agent does not start

    Hi,
    i am installing Solution Manager Diagnostics on a Solution Manger 7.0 System. At the moment i am on the point to install the Wily Introscop Agent and i have following problem:
    At first i tried the automatic setup and deployed the agent with JSPM and it seemed to work. I see "ISAGENT" on the System Information -> All Compontents over http://0/smd/admin and there is no log directory in the wily directory?
    Does anybody has an idea whats wrong?
    Best Regards,
    Stefan
    Edited by: Stefan on Feb 17, 2009 8:57 AM
    Edited by: Stefan on Feb 17, 2009 9:31 AM

    Hello Stephan,
    1. Wily IS Agent (2 agents) is installed ONLY in SOLMAN system.
    2. Then, with SOLMAN_SETUP Guided procedure, in third phase (Managed System Configuration),
        you deploy the Wily IS Agent to your managed system.
    To summarize :
    1. Install the ISAGENTxxx.SCA in SOLMAN only !
    2. Start the SOLMAN_SETUP guided procedure
    3. Phase I - Initial Configuration
        Phase II - Basis Configuration
        Phase III - Managed System Configuration.
    In Phase III, there are 6 steps :
    1.     Connect Managed system
    2.     Check Prerequisites
    3.     Manual Configuration
    4.     Diagnostics Configuration
    5.     Wily Introscope Configuration
    6.     Create Logical Components
    The Wily IS Agent (2 agents : IS Agent wich monitored JAVA instance and Wily Host-level Agent which a sub-process of the SMD Agent) is configured and STARTED here.
    So, you cannot start / stop by any OS command the Wily IS Agent.
    You start it from SMD.
    Hope it help you.
    Best regards
    Pascal Cuennet

Maybe you are looking for

  • What is The diffrence between The iPad 2 and The iPad 3

    I world like to know The diference. I want to know which one is better to buy i am looking for a cheap Price.

  • One of the USB devices attached to this computer has malfunctioned and ...

    Hello all, I have the same problem with one of our members here and also would really appreciate some help. I have a iPod video since last December and it worked just fine. Yesterday, I took some of the data out from my iPod with another computer and

  • Urgent...Please help with this HS

    INITHSODBC.ORA ============== HS_FDS_CONNECT_INFO = SPS_BusInt1 //this is the System DSN for Sybase HS_FDS_TRACE_LEVEL = ON HS_FDS_TRACE_FILE_NAME = HS_SPS.log LISTENER.ORA ============== SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME = O

  • Can't use mouse to select colors in color picker

    When I am in the Color Picker pallet and using my mouse, I can not select colors from the field or use the verticle slider bar. I can use my up/down arrows to move the little round circle, which then changes the RGB numbers. I'm in Photoshop CS2 in W

  • 10.4 Install on Quicksilver

    I have a Quicksilver (I believe it is the 2002). I have the stack of install CD's b/c I do not have a DVD drive. When I start the install process the computer fails the installation check. I get an error that states that OSX can't be installed on thi