Is Working with Folders in EASY DMS only

Hi DMS Gurus,
1) Is Working with Folder a Special feature of Easy DMS and not much use if we donu2019t go for specifically working with Easy DMS,
2) Can Easy DMS and Normal DMS work simutaniously, ie.. can both be implemented simultaneously and used parallely when and where each ones need is raised.
3) What r the limitations of going with EASY DMS as compared to normal DMS,
like Working with Folders can be configured with normal DMS implementations also?
Thanks in Advance,
Kumar

Hi Kumar,
Easy DMS is an external software which can be installed.
In Easy DMS working/managing with the folders is the great facility which is not overall possible in standard DMS.
Easy DMS fetches the backend configuration done in standard SAP. Depending upon the user's comfortability Easy DMS is used,if user is not comfortable with the standard sap screen then he can use Easy DMS where all functions like standard DMS can be used.
Maintaining folders is a option for which Easy DMS is used very regularly.
Configurations watever done once in standard DMS is applicable for both standard DMS and Easy DMS.
In Easy DMS particular authorizations can be provided for particular folders.
Thank You,
Manoj
Pl. reward if useful.

Similar Messages

Working with folders Folders

Can anyone help me????? I work with folders in logic 7.2.3 for example I have my drums in a folder, vocs in a folder, as well as guitars and other instruments. The problem occurs when I record say vocals, because after the recording stops logic jumps out of the folder meaning I always have to double click the folder to get back to the recording that was made. I think it's a setup problem because in older versions of I had no problems. Everything else works fine. Help!!!!!!

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

my voice call services is not working with cellular network...only works fine with wifi..please help?

Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

Microphone works with Utube and iTunes but only with earphones for games and Facebook

Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

Microphone works with Utube and iTunes but only with earphones for games and Facebook, obviously the microphone works but is there something I need to turn or or something to get the external microphone to work for everything?

Working with Folders and Sub-Folders

I'm updating this big site, and its pages are organized into
folders. I've only ever organized my images and .pdf files with
folders not my html files but all my prior sites have never had so
many files as this one. It’s starting to drive me crazy
though because pages in folders aren't connecting to scripts in the
scripts folder, menus aren't working right because of it and I'm
not sure what I can do to fix it.
My question is if images are showing up in these sub-pages,
the linked css is being applied in these sub-pages why are the
scripts not working in the sub-pages? For example, all the top
level pages easily connect to the rotating JavaScript banner, but
as soon as you go into a sub-folder page the banner disappears. All
these files are being updated via templates so any changes I'm
doing is affecting all the pages the same. That’s why
it’s confusing me why an image would connect the same but a
script wouldn't. Don't they search for their links root down or
does it search the folder its in down? How can you get templates to
work under such conditions where files are both in the root and in
folders and sub-folders?
Site reference is:
http://golfforkids.net/focus/index.html
Please note that this is a temporary domain for testing. The
top menu will pop up a window saying that it needs to be
registered. They are, just not to that domain and I don't have
access to the native domain. Sorry for the inconvenience!
Thank you for any clarification!!!

''"Are you subscribed to those subfolders?
File (Alt-F) - Subscribe"''
Please see #2 in original post:
''"2) Trying to Subscribe to folders only shows Inbox, not sub-folders for Inbox."''
Attached is an image illustrating this (this screenshot was taken after forcing Thunderbird to show Inbox folders as described in #3 of OP)
{In OP I was unable to attach images}

Working with 3D layers and camera only in miniature scales?

I'm matching 3D layers in AE to footage shot with camera. When I try to work with this I seem to work with sizes that AE can't cope with. In real life a layer should be 20 meters away from the camera. When I try to set these settings it jumps back to about 12 meters. ALso the camera can't be offset more than about -12000 mm (12 meters). That's no good. After Effects seems to work with tiny sizes. (you can't use meters or even cm as units, just mm). When I look in top view in my windows everything is out of reach. can't find the camera, can't find the layers. So...of course it's me doing something wrong and AE should be set differently, but how?

Working with footage from a camera and matching CGI gives us the possibility of adding the lens settings like filmsize, focal length and angle of view to the camera settings. That way we can mimic the camera in AE to the actual camera.Also using real life distances like the distance to a table can be used to create correct perspective, especially if something generated in AE changes from z depth. Therefor I use known sizes and distances. I'm happy After Effects lets me since it has the option of using milimeters. A small size, but still a true real world size. Using this kicks everything off the screen though. Scaling everything 10 times, so thinking a mm is actually a cm would make the real life sizes and camera settings unworkable I'd think. I can imagine I'm doing something wrong, but don't know what. It just doesn't seem right to me having to scale everything when real life sizes are used. What else are they there for?

Working with folders and save metadata to file compatability.

when i edit in developer within lightroom, then move from the 'previous import' list to the folders which hold different projects by dragging them into the folders i have imported from the hard disk, it saves only the original files, and not my new edits.
do i have to batch export everything i edit in lightroom to be able to use it in non adobe applications??
i tried save metadata to file for these images, and then in finder they are no longer available for quickview (spacebar or command y) and finder quits. futhermore when these files, with the updated metadata, are dropped into an iwork file, they are not recognised as jpeg's anymore. but do work in photoshop, and i assume other adobe applications because the embedded metadata was designed to be compatible with adobe.
how can i have the 'develop' editing i am doing in lightroom transfer to the folders i want to have these images saved in without laboriously exporting them and having saved each image twice? does lightroom have a way i can do this?

If you're largely preparing images for the web, you simply export a batch from LR at the appropriate size and quality, in sRGB space, with or without metadata as you choose. Nothing laborious about it.
Are you starting with JPEGs or RAW images?
The bug in Leopard is known, but you also cannot expect the Finder to show what edits you have made in LR until the images are rendered out, as they are in an Export.

Mac iBook works with WRT54G v8.2 router only if it's not secured..

I've read that many people are having problems using their Mac's with the WRT54G router and no one seems to have a solid answer.
My router (v8.2) is wired to my Dell PC and it works perfectly. When I try to connect wirelessly using my Mac iBook G4, it says "invalid password". I've typed it in several times and have even changed the password and it still doesn't work. If I disable the security, I have no problems getting on. What can I do?
I've tried several suggestions other people have gotten and it just doesn't seem to be working. Many people said to do the firmware update 8.2.03 and that that has been the problem with the older models. However, my v8.2 already has it. Changing to different security modes doesn't work either. I don't know how to manually connect my Mac to the router either... is that an option? Also, my husband would like to use his iPod touch wirelessly as well. We can use both our Mac and iPod with other Airport Network signals we get, but we'd like to use our own (with security).
Please help! I'm not too experienced with computers...
Message Edited by msdani on 05-31-2008 09:42 PM
Message Edited by msdani on 06-02-2008 12:42 PM

Yes, it is a v8.2 router and so is the firmware.
From my research I believe I need to make sure my Mac iBook is using the same WPA method/security mode and shared key as the router. If that is the case I have no idea how to go about doing so. I have tried to find info on the net on how to know/change what my settings are. I'm pretty frustrated with the whole situation.
So my question is if I can't figure out how to have security and be able to connect with my Mac... is it just as good to make the router a "closed connection" (disable wireless broadcast) and use a wireless MAC filter so that only computers I have on a MAC list can connect? I've set my router settings as such but just want to make sure that it would be as safe as having security. Is there a way for people to get around my settings and still get my signal?

Working with folders and iTunes

Trying to solve the problem that I can't use iTunes to manage my mp3 library because I've got other hardware and apps that use it. So I've got to do it manually...which then leads to iTunes being out of sync.
The mp3's are on my NAS device.
I've gotten so far with an AppleScript to do it but it falls over on a folder with an '&' in the name.
I'm fairly sure its related to posix and properly referencing the folder.
Any guides or tutorials on writing scripts that use network folders?

-- iTunes Folder Sync.applescript
-- iTunes Folder Sync
-- Created by Chris Beach on 28/06/2006.
-- Copyright 2006 All rights reserved.
-- addToLib v 1.1 - An AppleScipt application that adds all files in a given folder to the
-- iTunes Music Library and then (optionally) deletes the files from the source folder
-- Modified from the Add to iTunes Library Desktop Droplet Script by Apple Computer, Inc.
-- Copyright 2004 Ken Barnt <[email protected]>
-- Change Log
-- v 1.0 - original release
-- v 1.1 - fixed bug where sub directories would not be recursed
-- - added support for AAC and Protected AAC files
-- This software is distributed under the Apple Public Source Licence
property myFiletypes : {".mp3", ".aiff", ".aac", ".wav", ".mov"}
global counter, playlist_status, this_playlist
on run
-- set the following variable to the path to the folder whose contents
-- you want to add to the iTunes Music Library
set temp_folder to "MEDIA:Music"
display dialog "Import Folder is: " & temp_folder & " Continue?" buttons {"Cancel", "Ok"} default button 2 with icon 2
if the button returned of the result is "ok" then
processfolder(tempfolder)
--display dialog counter & " items added!"
end if
end run
-- this sub-routine processes folders
on processfolder(thisfolder)
display alert POSIX path of this_folder
set this_folder to the POSIX path of this_folder
set these_items to list folder this_folder without invisibles
repeat with i from 1 to the count of these_items
-- try
set myItem to ((this_folder as string) & ":" & (item i of these_items) as alias)
tell application "Finder" to set IsFolder to (kind of myItem = "Folder")
if IsFolder is true then
processfolder(thisfolder & ":" & (item i of these_items))
else
--check extension
tell application "Finder" to set myExtension to "." & (name extension of myItem) as string
if myFiletypes contains myExtension then
set this_item to myItem as alias
--display alert (myItem as string)
--processitem(thisitem, (path to myItem) as string)
end if
end if
-- end try
end repeat
end process_folder
-- this sub-routine processes files
on processitem(thisitem, item_folder)
try
tell application "iTunes"
launch
set this_track to add this_item to playlist "Library" of source "Library"
if "_Compilations" is in item_folder then set this_track's category to "Compilation"
if "_SoundTracks" is in item_folder then set this_track's category to "Soundtrack"
if "_Classical" is in item_folder then set this_tracks's category to "Classical"
if "_Games" is in item_folder then set this_track's category to "Game"
if "_Singles" is in item_folder then set this_tracks's category to "Single"
if the playlist_status is "OK" then
duplicate this_track to this_playlist
end if
end tell
set counter to counter + 1
end try
end process_item
you can see where i've been playing with posix!

Why doesn't "My Tom Tom" (GPS site) work with Firefox? I can only seem to get updates via IE.

When I initially activated my Tom Tom GPS (Jan 2012) I did not have a problem using Firefox. About 4-6 weeks ago I attempted to update the device and "My Tom Tom" would not run with Firefox. After literally hours of trying to get it to work, I tried Internet Explorer and the updates ran without a hitch. Today I had the same problem and after a few unsuccessful attempts to use Firefox, switched to IE and had no problems. I am not sure, but I think I updated my Tom Tom device at least once via Firefox and believe the problem developed sometime after April 2012

It is most likely because you are running a very out of date version of Firefox. I have a TomTom, and it works fine with Firefox 15.0.1. Try to update to that then try again.

Which apple iPad Air should I purchase to work with SIM card that will only be needed about 4 weeks per year?

Purchased apple ipad air with wifi only want to switch to one that has SIM card. Only needed for travel about 4weeks per year...understand you can swiitch SIM cards. Which should I start with?

The biggest issue between the 1 and 2 is that all devices eventually age out of software updates. For example the iPad 1 maxed out at iOS 5.1.1, only the Touch 5 was eligible for iOS8 and I think only iPhones 4+ could get iOS8. So eventually, if you get a 1 you may face maxing out of the iOS updates before the two.
That said, even if your device maxes out it'll still run just fine as it is. You may just face issues with future apps....so say my iPad maxes out in December. In February a really cool game comes out and I want it... but wait, it's for the newer iOS and won't install on mine. If you're aware of the issue and accept the issue, there's no reason you can have a fully functioning older device.
And if the 1 is more stable than the 2, even better. I've been very lucky with my iPad 2 to have it be a very stable and dependable model while later models do seem to have had issues.

IPad (iOS7.0.3) sync to desktop iTunes won't work with wifi ... Only wired

For some reason, my desktop itunes (11.1.2) doesn't connect to my iPad by WiFi (which it ALWAYS did in the past) so now I have to wire it up to update and sync..??? Another broken Apple feature?? Seems a lot like that other company that I thought I'd gotten away from.. :-(

Hello DJKnutsen,
Thank you for providing the details of the issue you are experiencing when syncing your iPad with iTunes over Wi-Fi. I recommend following the steps in the article below for an issue like this:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/TS4062
Thank you for using Apple Support Communities.
Best,
Sheila M.

Net use map drive is working with built-in admin account only

I currently have a windows 7 PC that I use
net use in cmd file to map drive to Windows server 2008.
It works if I use built-in admin account/password but I've tried another account that's in the administrator group on the server and I get errors.
NET USE X: \\IPADD\c$\inetpub\ftproot password /User:adminuseraccount
NET USE X: \\IPADD\c$\inetpub\ftproot password /User:server\adminuseraccount
After tweaking the net use command a number of ways, the 2 following errors are what I'm getting for the most part:
System error 1219 has occurred.
Multiple connections to a server or shared resource by the same user, using more
than one user name, are not allowed. Disconnect all previous connections to the
server or shared resource and try again.
OR
System error 5 has occurred.
Access is denied.
I've looked at many searches on this but can't get this to work.
Also, one thing I'm thinking of doing is changing the built-in admin name and password. Is this a safe thing to do?
Thanks,
Dave

Hi,
Can you check this link?
http://support.microsoft.com/kb/938120
Thanks,
Umesh.S.K

Youtube not working with chrome, safari and firefox only on mac computers 10.7

no clue why. This has been happening for quite awhile

Nope, that was done a while ago. Deleted and re-installed as well. Did a discussion search and it looks like it hasn't been resolved for the majority the lion users. If I shut the computer down and re-start it will work for a while.

Working With Folders

Is there anyway to open a folder in the arrange and have it stay open when changing screensets? Everytime I switch back to the screenset that had the open folder, the folder is closed. Thanks.
-Ben

If you lock the screenset with the folder open, it will be open when you switch back to it.

Is Working with Folders in EASY DMS only

Similar Messages

Maybe you are looking for