Is XI included in Netweaver Preview 2004s

Hi all,
I would like to know is XI also included in Netweaver 2004s(ABAP Preview edition).
Thanks in advance.
Suresh

yes I agree with Rich
I also think the preview edition just exists of the SAP Web AS (which since 6.40 contains the BW component)
Regards
Juergen

Similar Messages

NetWeaver Sneak Preview 2004s ABAP - Can't logon with German

Hi SDN Members,
yesterday I've installed my copy of NetWeaver Sneak Preview 2004s ABAP. The installation runns smoothly. Licence installation did not worked through transaction SLICENSE. So I logged on as User nspadm and did it on command line. But now to my problem: I can't logon with language "DE". I get the error "Select one of the installed languages". I've checked Transaction SMLT and German looks like English.
Regards
Gregor

hello Gregor,
there is the 'zcsa/installed_languages' parameter in the profile (NSP_DVEBMGS00_<hostname>) set to 'E'. If you'd like to run your Sneak Preview in German language you have to remove the parameter from the profile and then restart the system.
regards, Manfred

Web dynpro application deployment problum on sneak preview 2004S

Hi all,
I have installed SAP Netweaver sneak preview 2004S every thing is fine but when ever I am try to deploy a simple web dynpro application I got this error.
Nov 2, 2006 5:02:03 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : systech-sap92
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/jkumar/LOCALS1/Temp/temp45999home.ear
Result
=> deployment aborted : file:/C:/DOCUME1/jkumar/LOCALS1/Temp/temp45999home.ear
Aborted: development component 'home'/'local'/'LOKAL'/'0.2006.11.02.17.01.29':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [systech-sap92] with user name: [Administrator] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
Please help me out asap.
Regards
Jitender

Hi jitender,
I've installed the same version.
After configuring the Netweaver Developer Studio (+ searching for the config) and trying to deploy a webdynpro application I was asked for an SDM password (which should be the default password from the install "abcd1234" unless you've changed it of course)
After entering it I was able to deploy it.
In other words can you check if your config settings in the Netweaver Developer Studio are correct? I cannot check now unfortunantly.
Br,
Tom.

How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

Hello to all,
sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
Thanks and regards,
Galyna

Hi,
In previous link contain this info
This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
1)      Go to System Administration
2)      Go to System Configuration
3)      Go to Portal Content (Right Side Panel), open that folder.
4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6)      Choose next
7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8)      Open the Newly Created System.
9)      Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b)      Logical System Name - Give the logical name as defined in the backend system
c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a)      ITS Description à Give some Description
b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
      default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a)      Web AS Description -> Give some Description
b)      Web AS Host Name - same as ITS Host Name
c)      Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13)   Select "User Management" property, now fill the required fields like
a)      Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b)      Logon Method - Select UIDPW.
c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23)   Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Regards,
Senthil K.

Adding BI Java on NetWeaver Portal 2004s installation

Hi All,
We have NetWeaver Portal 2004s sps 10 installed.
We would like to know if we can add BI Java on the same instance.
Thanx
Jayant

Hi Yayant,
Yes, its possible to have BI Java stack added to Netweaver 2004s,
but from my point of view the version should already been installed with Netweaver 2004s Java stack as SAP_BW.
Check this in the System --> Status --> SAP System Data menu of your respective system.
Assign points if it helps you.
Regards,
Sreedhar

In PI-7.0 Which Modules are included in Netweaver

give me the detail about in PI-7.0 Which Modules are Included in Netweaver(XI,EP etc)

Hi,
PI scenario is just used for XI
Regards,
michal

Compatibility of Informatica with SAP Netweaver BI 2004s

Hi,
Currently we are using Informatica Power Center Version 6 with SAP BW Version 3.1. So far there has been no problems in terms of connectivity or extraction. We are now looking to upgrade to SAP Netweaver BI 2004s. Would anyone be able to tell whether our existing Informatica would be compatible with the Netweaver version ? I am told that the latest Informatica is now version 7. Do we need to also upgrade that Informatica to version 7 in order for it to be compatible with SAP Netweaver BI 2004s?
Any inputs regarding this are highly appreciated. Thanks in advance.

Hi,
Check this,.. this has very little info ..
http://www.taborcommunications.com/dsstar/04/1130/109597.html
Thanks,
Raj

Netweaver Preview + BI

hello,
I am university student and intend to take SAP BW3.5 certification exam. I would like to know If it is possible to learn SAP BI concept using Netweaver preview ABAP edition.
I previously asked this question in Netweaver thread and someone mentioned that Netweaver preview ABAP edition have integrated BI module but requires some configurations to enable it. So could anyone please help me out with this.
Thank you

I found my answer in this post:
Re: ABAP Preview and BW

SAP Netweaver 7 (2004) installation guide

Hi,
I am trying to install SAP Netweaver 7 (2004) in my desktop. But I am
having problems with it. I do not know how to create a DDIC user and its password. At the last phase of installation it is trying to perform a test logon with DDIC user but failing. I am sure with my system hardware requirements. Can anybody give me a solution, or give me a installation guide which can help me to make it through ?
Please help...............

Hi,
DDIC is a default user.No need to create it.Its password is the master password that you should have given during the time of installation or you can give the password 19920706 which is defined by SAP.
DDIC is mainly for working Transport Mnagement System(TMS).

Problem in Uninstalling SAP ABAP sneak preview 2004

Hello ,I am trying to uninstall the SAP ABAP sneak preview 2004.but the main problem is that i have forgot the DB manager (DBM operator) and CONTROL passwords. is there any chance to uninstall with out giving passwords or to retreive the passwords ?
Regards,
Gopi

If you installed it on an XP machine, restore the system back to the date and delete all related folders.

ABAP Unit on ABAP Sneak Preview 2004s

I am trying to look at ABAP Unit within ABAP Sneak Preview 2004s. Upon trying I get a message 'The system settings prevent the use of unit tests in this client'. I have gone to transaction SAUNIT_CLIENT_SETUP but it will not allow me to uncheck 'Prohibit Unit Tests' option.
Does anyone have any suggestions? I would like to look at this and demo to the group as our 'real' ECC6 environment will not be available for some time.
Glenn

Hi Glenn, I have the same preview and when I run the tcode it gives me a screen, where the checkbox(prohibit unit test) is already unchecked. All is greyed out, but there is a change mode icon on the application toolbar. When I click this button it is allowing me to change the value. What client are you working in, I'm working in client 001.
Regards,
Rich Heilman

ABAP Sneak-preview 2004

Hi,
I am trying to install sneak-preview 2004. I got the below error. Can anyone tell me how to solve this?
Failed in step 17 of 24.
ERROR 2007-01-16 18:42:21
CJS-30023 Process call 'C:usrsapNSPSYSexenucNTI386R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l
test_MIGKEY.log -K' exits with error code 2.
For details see log file(s) test_MIGKEY.log.
ERROR 2007-01-16 18:42:21
FCO-00011 The step testMigrationKey with step key
|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|10|0|NW_ABAP_Import|ind|ind|ind|ind|0|0
|testMigrationKey was executed with status ERROR .
BM

Finally i found the log..under
C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ADA\SYSTEM\CENTRAL\AS-ABAP\log_17_Jan_2007_20_54_26
Here is the error log..
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: START OF LOG: 20070116184220
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: version R7.00/V1.4
Compiled Sep 14 2005 23:24:01
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace:   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(TFH) ERROR: Unable to open C:\Documents and Settings\BM\My Documents\BM\ABAP Web Dynpro\SAPNW2004sSneakPreviewABAP\SAPNW2004sSneakPreviewABAP\NSPExport\ABAP\DATA\SAPAPPL0.TOC
(TFH) ERROR: OS error message: Permission denied
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20070116184221
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: START OF LOG: 20070116201845
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: version R7.00/V1.4
Compiled Sep 14 2005 23:24:01
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace:   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(TFH) ERROR: Unable to open C:\Documents and Settings\BM\ABAP Web Dynpro\SAPNW2004sSneakPreviewABAP\SAPNW2004sSneakPreviewABAP\NSPExport\ABAP\DATA\SAPAPPL0.TOC
(TFH) ERROR: OS error message: Permission denied
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20070116201851
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: START OF LOG: 20070116213501
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: version R7.00/V1.4
Compiled Sep 14 2005 23:24:01
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace:   prepare() of C_0000, rc=1, rcSQL=-942 (POS(28) Unknown table name:SVERS)
DbSl Trace: SQL PREPARE on connection 0, rc=-942 (POS(28) Unknown table name:SVERS)
(DB) INFO: connected to DB
(TFH) ERROR: Unable to open C:\Documents and Settings\BM\ABAP Web Dynpro\SAPNW2004sSneakPreviewABAP\SAPNW2004sSneakPreviewABAP\NSPExport\ABAP\DATA\SAPAPPL0.TOC
(TFH) ERROR: OS error message: Permission denied
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\NSP\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20070116213502
BM

View designer in Sneak Preview 2004s Abap

Hi to all,
just a short question.
The view designer with all UI elements (standard simple, standard complex & Standard container category) is avaiable in Sneak Preview NW 2004s Abap ?
If not (because i cannot find it), can i install it as a separated package (if yes,where i can download it)? Or the latest version of the NW Sneak preview 2004s (SP8)already contains it ??
Thx a lot
Andrea

Hi Rich,
thx a lot for your quick reply.The problem is i cannot find it.
I run SE80 trx, i create a simple WD application and a view. I select the view, then and i have three "frames" (from the left):
- The standard SE80 tree
- In the "layout" tab of the WD application, i have the browser preview (but it shows the standard IE error page) and a window with the UI of the windows, designed in a tree (rootuielementcontainer).
But nothing about view designer.
I have sapgui 6.40 patch lev.20
Thx a lot
Andrea

Authorization problem in Sneak preview 2004s ABAP version

Hi all,
I have successfully downloaded the sneak preview 2004s ABAP version, I hv created the client 001 for BI. when I try to create DataSource or Transformations system saying You have no authorization for DataSource and when i try to create infosource, it is saying <b>You are not authorized to display the InfoSource</b>,but system allow me to created info cube.
Any in puts plz.
Regards.
Hari
Pages: 1

Hi Rich,
thx a lot for your quick reply.The problem is i cannot find it.
I run SE80 trx, i create a simple WD application and a view. I select the view, then and i have three "frames" (from the left):
- The standard SE80 tree
- In the "layout" tab of the WD application, i have the browser preview (but it shows the standard IE error page) and a window with the UI of the windows, designed in a tree (rootuielementcontainer).
But nothing about view designer.
I have sapgui 6.40 patch lev.20
Thx a lot
Andrea

Sneak Preview 2004s ABAP

Hi,
I'm trying to download Sneak Preview 2004s/ABAP and get the following error message when I execute sapinst.bat:
starting gui server process:
sapinstport: 21200
guiport    : 21212
command    : "C:\j2sdk1.4.2_11
bin\javaw.exe" -cp "C:/DOCUME1/CALUMF1/LOCALS1/Temp/sapinst_exe.2552.1147875078\jar\instgui.jar;C:/DOCUME1/CALUMF1/LOCALS1/Temp/sapinst_exe.2552.1147875078\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
starting gui process:
port   : 21212
command: "C:\j2sdk1.4.2_11
bin\javaw.exe" -cp "C:/DOCUME1/CALUMF1/LOCALS1/Temp/sapinst_exe.2552.1147875078\jar\instgui.jar;C:/DOCUME1/CALUMF1/LOCALS1/Temp/sapinst_exe.2552.1147875078\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTGui service=com.sap.sdt.engine.ext.sapinst.SAPinstServiceIF host=localhost port=21212
guiengine: call to bind() for socket 21200 1748 failed . No error
103 guiengine.connection.failed 21200, 877
Exit status of child: 1
I think I've missed something obvious. Has anyone had this problem?
Many Thanks - Calum

Hi,
I'm afraid this problem was never resolved. I'm away for two weeks but plan to get to the bottom of this error when I return ( 2nd July). It may be worth posting it again and hope you have better luck than me. Be sure to state that you have checked the list of system requirements - will save some time.
Hope it goes well.
Calum

Is XI included in Netweaver Preview 2004s

Similar Messages

Maybe you are looking for