Is Xperia Z1 compatible with the Sony CP-F10L Portable Power Bank

Hi i got the Xperia Z1 and am happy with it but i do use it so much that was thinking of getting the Sony power bank Model :- CP-F10L which is the highest capacity sony official power bank please advice if its compatible.
Thanks in advance for all information on the above subject.
Regards,
                Reuel.

Uliwooly :- i have followed your advice since i had my c903 then satio, then xperia s n now this.
However no offence but is that a concrete "YES"  as i wanna make sure nothing happens to the phone and if anything happens while charging (damage to phone), that it will be covered in the sony warranty.
Thanks for your help its just that sony mobiles site for the same battery has no compatibility list which mentions the xperia z1. with the product info of the battery in question

Similar Messages

  • Is "Sony Cybershot DSCT300 10.1MP Digital Camera" compatible with the Sony 40m Marine Pack?

    Hello, Is Sony Cybershot DSCT300 10.1MP Digital Camera compatible with the Sony 40m Marine Pack? Thank you for your help.

    Hi squid10feetfish,
    Welcome to the Sony Community!
    The 40 m marine pack, MPKTHF, is the casing that is exclusively made for this unit. Any other units of the marine pack can't be used with other camera models as they are made specifically to fit the dimensions of the respective compatible units.
    If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch
     

  • HT4539 is this compatible with the sony ireader tablet

    can you download books to the sony reader tablet?

    Not from itunes.
    Ibooks are for ipod touch/iphone/ipad

  • Anyone else finding fault with the sony DVP-FX980 portable dvd player related to the plastic latch ?

    DVP-FX980
    design flaw: latch mechanism falls out renders unit unuseable. this is my second experience with this problem. warranty of 90 days isn't enough to cover. I am sure others have had this same experience since I've seen it twice now.

    I'm sorry to know you have this issue on your portable DVD player. We always post known issues of Sony products on our Esupport website and this is not one of them. 

  • My iPhone 4S is no longer compatible with my Sony ICF-DS15iP dock since updating to iOS7.1.1

    Since updating to iOS 7.1.1 my iPhone 4S (16GB) is no longer compatible with the Sony audio dock.
    How can I fix this ? it was working before updating my phone.
    Thanks for your reply

    Try restoring the iPhone ,it may be corrupted iOS installation

  • Why is my iPhone 4S no longer compatible with my Sony ICF-DS15iP dock since updating to iOS6.1?

    Since updating to iOS 6.1 my iPhone 4S (16GB) is no longer compatible with the Sony audio dock. Obviously the FM radio still works fine, and when docked the phone still charges, but now when you play music the audio only comes out of the phone's integral speaker and not routed to the amplifed speaker in the dock.
    Any ideas how this can be corrected, without rolling back to iOS 6.0 that is??

    Hi Duke,
    Did you get this to work. I have same issue.
    Thanks

  • Looking for a sports video camera that is compatible with the mac

    Looking for a video camera that can record sports well and is also compatible with the mac. I've been using iMovie to edit videos for a highlight reel of my highschool soccer games that I coach.

    I like Sony HD MiniDV (HDV) Handycam Camcorder - HDRFX1000, but I have also used several older Sony (DCR-TRV17 and DCR-TRV70) and Canon (VIXIA HV20, VIXIA HV30, and VIXIA HV40) tape-based Firewire-equipped camcorders with good results.
    I prefer tape-based Firewire-equipped cameras because of their IEEE 1394 transfer speed, compatibility with iMovie HD, and ability to serve as the source recording directly into iMovie when desired.  If none of these characteristics is important to you, other Mac-compatible camcorders with suitable zoom ranges and lens speeds for the light levels you encounter should also do nicely for recording at your games.
    You do not say which iMovie version you are using, but you can find about known compatible camcorders by searching for the info in a search like this one.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Superdrive in macbook & mac mini ... / compatible with all Sony displays ..

    superdrive in macbook & mac mini are and dvdram drive [read/write] ? if yes what is the speed ? Can accept disks cd/dvd created on a windows machine ?
    mac mini is compatible with all Sony displays like SONY 17 inch SDM-X73/B .26 DELUXEPRO 1280X1024 DVI-D ?

    Good Morning,
     Welcome to the Apple Discussion Forums 
    To address your questions...
    Per the [Apple MacBook Technical Specifications Page|http://www.apple.com/macbook/specs.html] the MacBook's SuperDrive is compatible with the following media types...
    *8x slot-loading SuperDrive (DVD±R DL/DVD±RW/CD-RW)*
    *Maximum write:* 8x DVD-R, DVD+R; 4x DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, DVD+RW; 24x CD-R; 10x CD-RW
    *Maximum read:* 8x DVD-R, DVD+R, DVD-ROM; 6x DVD-ROM (double layer DVD-9), DVD-R DL (double layer), DVD+R DL (double layer), DVD-RW, and DVD+RW; 24x CD
    Also, yes, the MacBook is compatible with reading from CD/DVD Discs recorded in Microsoft Windows.
    Addressing your monitor question, again, yes. That monitor should be compatible with your MacBook when coupled with an [Apple Mini-DVI to DVI Adapter|http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLI D?mco=60A2B5CD&fnode=home/shopmac/macaccessories/cables&nplm=M9321G/B].
    Hope this helps! 
    David

  • Ibook 500mhz AV cable its compatible with the iPod AV cable?

    Last Sunday i've found an old cable from my old ibook 500mhz: http://www.mac-pro.com/s.nl/sc.2/category.114/it.A/id.1383/.f
    Do you think it will be compatible with the ipod video that im waiting? (yes, because im from portugal and need to wait a lot for all the new mac products...)
    the jeck 3.5 connection seems very similar.
    Thanks a lot.
    Ricardo

    Ricardo
    No the jack is wired differently :
    http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
    If you are prepared to cannibalise the cable you can get it to work but it's not as tidy as the Apple supplied cable.
    Generic A/V cables may work if you get the RCAs in the right place, e.g. cables suitable for Sony camcorders work if you swap the Video (Yellow) and Right Audio (Red).
    I think that's what the previous poster was referring to.
    regards
    Brian

  • Content Tab: None of the fact tables are compatible with the query request

    Hi All,
    **One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
    I have made a rpd the joins in physical layer as shown below:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
    And the BMM layer as:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
    Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
    Dim - Comment Code Details
    Fact - Complaint
    Dim - Service Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
    I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
    When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
    Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
    Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
    Thanks in advance,
    Dev

    Hi Deepak,
    Option 1:
    My tables in physical layer are joined as below:
    D1--> F1 <--D2--> F2 <--D3
    Same way i model it in BMM
    D1--> F1 <-- D2--> F2 <--D3
    Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
    I go Sources>content tab of Fact F1 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Detail
    D2---------------------- D2 Detail
    D3---------------------- D3 Total
    then, I go Sources>content tab of Fact F2 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Total
    D2---------------------- D2 Detail
    D3---------------------- D3 Detail
    Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
    I need to know whether the way I have modeled it in BMM is right,
    Option 2:
    I can combine the two facts in a single Logical Fact or the above design should also work.
    (F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
    what will be the content tab details?
    Thanks,
    Dev

  • Bridge CC no compatible with the new After Effects CC 2014 ?

    Hi, I'm updating the Adobe suite (CC 2014) .but After Effects CC 2014 no longer works with the old Bridge CC (there is no update of Bridge). Since "browse presets" in After Effects when choosing a preset (dissolves etc) there is an error message:
    "After Effects error: can not import file" Entries lum.-marq.calque.ffx "unsupportedfiletype or extension (0 :: 1). With all presets.
    I tried on other computers with other adobe updated it makes such licenses except with the old version of adobe after effects (after CC effects) I tried too to change language of Bridge and After effects (beharps this is a langage compatibility problem) but the problem is the same.
    So I think the new version after effects CC 2014 is not compatible with the presets adobe bridge CC ??
    How can I do? I have to go through the old version of after to apply a preset Bridge? I can not even download it in cloud creativ ... there is only the new version of after effects...

    You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    Also, this is an OPEN forum, not Adobe support... please do not post personal information

  • I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

    I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
    The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
    PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

    Office 2011 is not compatbile with Exchange 2003.
    I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • TS4036 I've got a new iPad I'm trying to do an iCloud back up but keep being given the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad. How do I restore I cloud on my new device?

    I've got a new iPad and am trying to do an iCloud backup but keep getting the following message: no iCloud backups are compatible with the version of iOS (6.1.3) on this iPad.
    How do I restore info from iCloud onto my new device?

    You would have to update your device first, before you can restore your iPad from your backup. Resolution: set it up as anew device, then update your device to the latest version "Settings > General > Updates", then reset your device again "Settings > General > Reset > Erase All Content and Settings" and then after the iPad restarts again, choose to restore your device from your backup.

  • I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

    I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
    Currently use a Mac with the latest Mavericks 10.9.4

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

    When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

    Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

Maybe you are looking for