Is XS Project right for Database Schema and tables
Hi Friends
1.As per OpenSAP video it is suggesting to use XS Project for Database objects.
In my case I am planning to do AO Reporting and not creating any UI , is XS project still the right project type.
There is an option for General ->Project - would that be the right one.
2. Also in my UI I am not able to see the Prefrences->SAP Hana Development ->Repository Access to set the regit.exe. I did see couple of post mentioned about it but the response was not very clear , hence asking the question again.
regards
Poonam
Hi Poonam,
Poonam Hemrajani wrote:
1.As per OpenSAP video it is suggesting to use XS Project for Database objects.
In my case I am planning to do AO Reporting and not creating any UI , is XS project still the right project type.
There is an option for General ->Project - would that be the right one.
Project is used to group all the required development artifacts and the libraries required for them. So based on your requirement you can choose. I think "General" project would suffice your requirement if it is only to create schemas and tables.
But on the other hand if you choose to build an application using XS related libraries you can either choose to import those libraries later or create using a XS project now.
Will wait along with you to see Thomas Jung comments on this.
Poonam Hemrajani wrote:
2. Also in my UI I am not able to see the Prefrences->SAP Hana Development ->Repository Access to set the regit.exe. I did see couple of post mentioned about it but the response was not very clear , hence asking the question again.
Firstly from SP7, it is not required to setup regi.exe file. This file resides in hdbclient folder. So you need to check where you have installed hdbclient to see if you have that regi.exe file and configure it accordingly in the Path ( Preferences --> SAP HANA Development --> Repository Access ) you mentioned.
Regards,
Krishna Tangudu
Similar Messages
-
New User Database schema and table name
When i create a new user in Oracle Webcenter Spaces 11g, I am not able to get the name of the database schema and table, where it is stored. Any insight on this will be very helpful.
WebCenter (and WebCenter spaces) uses an 'identity store' instead of database schema for storing user information - in an 'out of the box' installation, users are maintained through an embedded WebLogic LDAP store.
See the Oracle Fusion Middleware Administrator's Guide for Oracle WebCenter, p. 34-2.
At the end of section 34.4.1:
WebCenter Spaces supports self-registration. When new WebCenter users
self-register, they create their own login and password and a new user account is
created in the identity store. See also, Section 34.4, "Allowing Self-Registration".
user9097357 wrote:
When i create a new user in Oracle Webcenter Spaces 11g, I am not able to get the name of the database schema and table, where it is stored. Any insight on this will be very helpful. -
Schema and Table .. Few doubts.
Hi ,
Can you please help me out on following questions.
1. How to physicalizing the Logical Model into database Schema AND Tables
2. How to create a Schema and table in oracle 11g. Let me know if scripts are available.
3. How to create a read only user with different restricted access.
4. How to deploying the Schema, Tables (and potential scripts) into Exadata.
Please provide the aboce details.
Thanks in advance.
Regards,
ParagYou need a Database Designer and a Database Administrator.
1. With experience of having done so earlier or having learned as an understudy to someone with expertise
2. Look up the Oracle 11g database SQL documentation. See http://www.oracle.com/pls/db112/homepage
3. See the Oracle 11g database Administrator's Guide and Security Guide (from the above URL)
4. Through a proper Change Control procedure. Each organisation has it's own methods of source code control and deployment.
Hemant K Chitale -
Schema and Table ..
Hi ,
Can you please help me out on following questions.
1. How to physicalizing the Logical Model into database Schema AND Tables
2. How to create a Schema and table in oracle 11g. Let me know if scripts are available.
3. How to create a read only user with different restricted access.
4. How to deploying the Schema, Tables (and potential scripts) into Exadata.
Please provide the aboce details.
Thanks in advance.1. How to physicalizing the Logical Model into database Schema AND TableseTRM
http://etrm.oracle.com/
2. How to create a Schema and table in oracle 11g. Let me know if scripts are available.Are you referring to custom schemas? If yes, please see https://forums.oracle.com/forums/search.jspa?threadID=&q=Custom+AND+Schema&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
3. How to create a read only user with different restricted access.https://forums.oracle.com/forums/search.jspa?threadID=&q=APPS+AND+Read+AND+Only&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
4. How to deploying the Schema, Tables (and potential scripts) into Exadata.What do you mean? Please elaborate more.
Thanks,
Hussein -
How copy the same project with its database schema & deploy it on same PC?
Hi,
Firstly, sorry about my forum handle. For some odd reason all the handles that I am trying to create are already in use.
Right, I am a new Application Express Developer and am managing my own Oracle Database Instance as well. I have managed to create a complete project and I have another client who requires the same project. What is the logic and steps that I can use in making a complete copy of the existing project and use it for my second client. The databse objects would be the same.
My initial thoughts are to create another database schema as a copy of the current database schema and then do an import/export of the existing project so that the new copy will work with the new schema? I am just talking on top of my head here. I am not a DBA and being new to Application Express administration does not help much either as well.
Thanks for reading my message.
Shahzad
Edited by: user10818643 on 05-Aug-2009 08:49Virtual private database basically works by modifying your existing query.
So you have a table with your clients and a code for each client
So when client A logs in, he uses an application_context to set his code.
You have to write the procedure to set the context.
Now , what you need to do, is to modify your tables so that you can join to your client_code table based on client_code.
So when client A runs his code, he only sees his own data. When Client B runs he only sees his Data.
But you , if you run as sysdba can see both sets of data.
Check out http://asktom.oracle.com and the oracle docs. Oracle expert one on one has a good section on this two (by tom kyte too)
You really want to satisfy yourself that this is the solution you want. Do the queries run slower. Well, it depends on how well you implement fgac. If implemented well, it will be marginally slower but you will have far less maintenance than an alternative implementation. The big advantage is adding additional clients has virtually no extra workload for you.
I think you may need to use database account authentication for this to work with Apex. I'm really not sure.
I suggest you read up on this, and maybe try and set up a 3 table demo app with it. That way you can see whether or not its for you. -
Difference Between Database Schema and Database User Account ??
First i would like to know what an Oracle Database schema exactly is ?
And what is it for and also What is it's use ?
Later the exact "Difference Between Database Schema and Database User Account".
I googled about it but i'm unable to find out it's The difference,
Please try to explain in a simple manner........
Thank you very Much in Advance..........user13655582 wrote:
Greate example. but i would like add one more point..
a user is a schema and schema is a user. but when this applies to the user that he become a schema, only if he has got some objects. so we can say while creating the user which dosent contain any objects called simple user account but afterwords when he has got an objects then we can say its a schema as the above user has shown you through the exampleIt is just word-play. There is nothing in like a 'status' indicator to say "USER_A is just a user but USER_B has become a schema". Many people use the terms "user" and "schema" interchangeably, and some very good DBAs will insist this is correct. I don't disagree with them even though I usually try to make the distinction.
In a typical application, all of the objects (tables, procedures, etc) that implement the app will be owned by a "application schema owner" - a user which exists for the sole purpose of owning the schema. Said user will have no privileges at all .. especially not CREATE SESSION. Except for possible maintenance activity no one ever actually connects as this user. User accounts are then given to actual humans who connect with their own accounts. The accounts have the necessary system and object privileges granted to them - via a role. One could also create a special account (let's call it APP_ADMIN) that is used for maintenance and batch operations within the application. -
How to manage and prevent database lock for database admin and development
how to manage and prevent database lock for database admin and development
[email protected]Hi,
can someone advise me some good book or even better a PDF or a white paper on the Web where it's explained well how to design and manage a relational database (that is normal forms, tuning, design, implemantation...)?
I've been working on Oracle databases for a few years as pl sql programmer, but I'd like to read something describing well the relational database theory, because I've been asked to work as database designer.There are many books available in the market, please go through this link -- http://www.amazon.com/gp/bestsellers/books/549646/ref=pd_ts_b_nav
I've been told to read "Fundamentals of Database Systems" by Ramez Elmasri, but I ask here for some more advices.I would strongly recommend reading this book, it was my best reference during my college study and even after starting my DBA career.
Thanks,
Hussein -
JDBC Schema and Table Names Reversed
Hi,
We're currently evaluating CR4E but are unable to successfully run/preview any reports.
We have successfully created a JDBC connection using the generic JDBC driver. We are connecting to an Ingres database. The connection is successful and we can browse databases/schemas/tables with no problem. The problem is with the SQL that the reporting engine is generating.
A simple example:
SELECT "currency"."description" FROM "currency"."john" "currency"
In this statement, "currency" is actually the table and "john" is the schema name.
The query should read:
SELECT "currency"."description" FROM "john"."currency" "currency"
Help would be appreciated as we're completely stuck.
Many thanks,
Darran SmithHi Tej,
Thanks for clarifying the issue on the JRC.
Executing:
SELECT "price_type"."currency", "price_type"."description" FROM "price_type"."john" "price_type"
against the DB results in "Table 'john' does not exist or is not owned by you" as expected.
Executing
SELECT "price_type"."currency", "price_type"."description" FROM "john"."price_type" "price_type"
against the DB works just fine.
I amended my code to simply call:
CRJavaHelper.changeDataSource(reportClientDocument, userName, password, connectString, driverName, JNDIName);
and changed the CRJavaHelper.java file around line 145 that originally reads:
newTable.setQualifiedName (origTable.getAlias ());
I tried setting the qualified name to various different things:
"price_type"
"john.price_type"
"otherSchema.price_type"
None of these worked, but they did produce different things in the JDBC trace log. I've uploaded the JDBC log file to showing what happens with either "price_type" or "john.price_type":
[http://www.romofabrics.com/iijdbc.txt|http://www.romofabrics.com/iijdbc.txt]
As you can see, everything looks OK (including the schema and table name) until the very final select statement is created.
When you say that generic JDBC is supported, is that what I'm effectively using?
Cheers,
Darran -
Difference between Database view and Table
Hi there,
Can anyone tell me the difference between Database view and Table.
Will the Database view query be more faster than a database table?Tables and database views can be defined in the ABAP Dictionary.
These objects are created in the underlying database with this definition. Changes in the definition of a table or database view are also automatically made in the database.
Data from several tables can be combined in a meaningful way using a view (join).
You can also hide information that is of no interest to you (projection) or only display
those data records that satisfy certain conditions (selection).
Database views implement an inner join. You only get those records which have an
entry in all the tables included in the view.
in views db modifications are not possible
views only contain data at run time
when they consult the database
in case of views the join definitions are already sstored in the database itself
whereas join as open sql is a query to oracle database as similar select statements
Views are optimized by SAP and stored in the repository while Joins
are in reports that needs to be compiled at every execution
Reward if helps
Regards,
Senthil
Message was edited by: senthil kumar -
Can i use create function for MSSql scalar and table valude function.
Hi,
1) Can i use create function for MSSql scalar and table valued function?
2) How many type of user defined function are there in oracle 11g express?
3) And can i reture any "type" form user defined function?
yourse sincerely944768 wrote:
Q1)That means even if i return predefined types like integer, varchar2 then also PGA is used ?The data type does not determine where the variable is stored. A string (called a varchar2 in Oracle) can be stored in stack space, heap space, on disk, in a memory mapped file, in a shared memory, in an atom table, etc.
It is the who and what is defining and using that string, that determines where and how it is stored.
The Oracle sever supports 2 languages in PL/SQL. The PL (Programming Logic) language is a procedural/declarative language. It is NOT SQL. SQL is integrated with it. The PL/SQL engine uses private process memory (PGA). So PL/SQL variables exist in the PGA (but there are exceptions such as LOBs).
Q2) So please suggest me solution in oracle.Sounds to me you are looking at how to implement a T-SQL style function as an Oracle function, and once implemented, do joins on the function.
Do not use PL/SQL in SQL in place of a SQL select. It is not T-SQL.
One cannot use PL/SQL to create functions along the style of T-SQL, where the function executes a SQL using some conditional logic, and then return as if the function was a native SQL select.
T-SQL is an extension to the SQL language - making it a hybrid and very impure language implementation. PL is based on ADA - part of the Pascal family of languages. The E-SQL (embedded SQL) approach used in languages like C/C++, Cobol and Ada, has been transparently done in PL/SQL. You can write and mix PL code and variables with SQL code. And the PL/SQL engine figures out how to make the call from the PL/SQL engine to the SQL engine.
But PL/SQL is not "part" of the SQL language and does not "extend" the SQL language in a T-SQL fashion.
So you need to check your SQL-Server preconcepts in at the door, as they are not only irrelevant in Oracle, they are WRONG in Oracle.
The correct way in Oracle, in a nutshell - Use the SQL language to do data processing. Use PL/SQL to manage conditional process flow and the handling of errors. -
I hav to upload bdc for vk11 trans and table konv.
hi experts,
i m new in BDC... i hav to upload bdc for vk11 trans and table konv.
frst doubt is
i hv to run shdb transc?? or just i hv to write program??
nd cn any1 send me teps as hw to create upload..
Condition Type Sales Organisation Distribution channel Material Price Unit Valid from Valid to
KSCHL VKORG VTWEG MATNR_01 KBETR_01 KPEIN_01 DATAB_01 DATBI_01
now plz tel me hw to do this...whether to run shdb or jus to write program in se38..
or i hv to do both...bt plz tel me step by stepPlease don't ignore the warnings. Read the rules of engagement.
Thread locked, again.
Thomas
wrking on ABAP OOPS, oput is coming but 1 field name wd customer name is nt -
Sample Oracle database Schema and sample training SQL
Hi,
I am running a windows 7, 64 bit machine. I am looking for sample oracle database schema with sample SQL queries and exercises(tutorial). Can you please point me in the right direction where I can download both.
Thanks for your time and help.sb92075 wrote:
ssk1974 wrote:
Hi,
I am running a windows 7, 64 bit machine. I am looking for sample oracle database schema with sample SQL queries and exercises(tutorial). Can you please point me in the right direction where I can download both.
Thanks for your time and help.
http://www.lmgtfy.com/?q=oracle+sample+schema
LOL!!!! -
Synchronization of database schema and EJB3 / JPA objects
Hi,
I am evaluating JDeveloper 11g. My goal is to create applications using JPA / EJB3 , ADF in rapid manner. I am stuck on really simple thing. I created my first web application (address book) where User has only 2 fields First and Last names. Now I would like to add an address field in to database (offline and online) and also to my EJB3 bean User. I can only do it manually by doing the same action on the database and ORM level. I consider it pretty serious hurtle for medium+ site projects.
So my question is if there is any way to automate the process of modifying database structure or EJB3 beans to make both in sync (database and beans).
If there is no such function I suggest that it makes sense to implement it.
-- Sergei RogovskiySergei,
I filed an enhancement request for this, not knowing how difficult this will be to implement
Note that JDeveloper 11 has its own forum: JDeveloper and OC4J 11g Technology Preview
Frank -
SQl Server Installation failing for Database Engine and Its Services
Hi,
I was trying to install SQL SERVER 2008 R2 on VM having 500 GB hard disk and 16 GB RAM.
OS is Windows Server 2008
But it fails for Database Engine.
Installation Details are as Below.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-10-13 18:41:01
End time: 2014-10-13 19:26:32
Requested action: Install
Log with failure: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x476BF04A%400xBB814387
Machine Properties:
Machine name: KVS-IN-WFAN092
Machine processor count: 4
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: di-softwareSoftwaresSQLSQL_2008_R2_Enterprisex64setup
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITYNETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITYLOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:Program FilesMicrosoft SQL Server
INSTALLSHAREDWOWDIR: C:Program Files (x86)Microsoft SQL Server
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:Program FilesMicrosoft SQL Server
INSTANCEID: SQLServer
INSTANCENAME: SQLSERVER
ISSVCACCOUNT: NT AUTHORITYNetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITYNETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: KRONOSENGsuperuser
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:Program FilesMicrosoft SQL Server100Setup BootstrapLog20141013_183354SystemConfigurationCheck_Report.htm
And Error in log file are maily as below.
2014-10-13 19:26:27 Slp: Completed Action: SqlBrowserConfigAction_install_Startup_Cpu32, returned True
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11
dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "SqlBrowserConfigEngAction_install_Startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlBrowserConfigEngAction_install_Startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "SqlEngineConfigAction_install_startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: SqlEngineConfigAction_install_startup_Cpu64 The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There are 11 dependant features. The feature is tested
for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant
features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "AgentInstall_AgentInstallStartup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: AgentInstall_AgentInstallStartup_Cpu64 The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are 2 dependant features. The feature is tested for results:
ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64. There
are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_Startup_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature
is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "FulltextConfigAction_install_startup_Cpu64" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: FulltextConfigAction_install_startup_Cpu64 The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features. The feature is tested for results:
ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64. There
are 11 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: MPT_AGENT_CORE_CNI_sql_engine_core_inst_Cpu64. There are
2 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_Replication_Core_Inst_sql_engine_core_inst_Cpu64.
There are 3 dependant features. The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Action "ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi" will return false due to the following conditions:
2014-10-13 19:26:27 Slp: Condition "Feature dependency condition for action: ConfigEvent_SQL_FullText_Adv_sql_fulltext_Cpu64_Install_StartupFinalize_postmsi The condition tests feature: SQL_FullText_Adv_sql_fulltext_Cpu64. There are 3 dependant features.
The feature is tested for results: ValidateResult, Result." did not pass as it returned false and true was expected.
2014-10-13 19:26:27 Slp: Condition is false because the required feature SQL_Engine_Core_Inst_sql_engine_core_inst_Cpu64 failed in result Result
2014-10-13 19:26:27 Slp: Completed Action: PostMsiTimingConfigAction, returned True
2014-10-13 19:26:27 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
2014-10-13 19:26:27 Slp: ----------------------------------------------------------------------
2014-10-13 19:26:27 Slp: Running Action: ExecuteExtendedTimingsWorkflow
Thanks,
MaheshI have uploaded detail.txt at below url.
http://m.uploadedit.com/b041/1413264342685.txt
Hi Mahesh,
According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
For more details about this error, please review the following similar thread.
http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
Thanks,
Lydia Zhang -
BAPI for Sampling scheme and Quality Info Record in QM Module.
Hi techies,
I have a two object(Sampling Scheme,Quality info record) for which i need a BAPI for uploading the data.
Please tell me if any one knows.
Richard.Vineeth,
Usually, I wouldn't think the follow-up action would be an issue with system performance. You say 7000 items, but do you mean 7000 UD's? I.e. an inspection lot of 1000 units isn't unusual and that would be 7 inspection lots. You've also now said that the program needs to look across plants for UD rejections and for notifications. That is another level of complexity.
While the UD follow-up action should still be able to handle that, I can't say it won't affect performance. I was going to suggest you have it only run on certain UD codes, but since you now need to reveiw this across plants that might not work.
What happens if my vendor/material is in a skip stage at plant A and Plant B opens a notification agains the vendor? Since there is no UD, the follow-up action wouldn't run and change the DMR at plant A.
If you need to look at a bunch of stuff, instead of the follow-up action, you may need to run a program in batch and have it run once an hour or every 10 minutes. Depending on how you write it, it could be pretty efficient.
Craig
Maybe you are looking for
-
How to link CRM Campaign to ECC Sales Orders
Dear all, How to see Sales (R/3) that happened as a result of Specific CRM Campaign execution. while creating R/3 Sales Order where do we refer relevant Campaign ID. In SAP how to analyse with respect to Budget, Cost and Actual Sales for a Campaign.
-
I downloaded later version of IPad software to watch a film. I backed up on itunes. All going well until i try to restore from itunes and all it says is you have used 5 authorisations. I've tried deauthorising and it then says I have been successful
-
Python 2.5 / missing msvcp71.dll issue on Windows
During a new DBXML installation I got stuck for a while installing the Python 2.5 bindings for DB XML 2.4.16 -- I kept getting a DLL import error when importing the dbxml module in the Python code. After a bit of troubleshooting I found that I was mi
-
Dear All, IN Tcode FB60 , If i enter Special G/L Indicator as 'T' ( i.e Travel Advance of Employee ), System gives error message , Special G/L transactions of type A are not supported, Message no. F5246 But if i enter same entry by Tcode F-43 with
-
Very slow internet (Dekalb county Indiana)
I am having problems with my internet speed. on thursday my internet connection speed was over 1000kbs but when i came home friday night my connection speed was only 168kbs. this has been going on for three days now. My modem is a westell 7500. if an