Is your key simbols printed in the middle of key?

Somehow my "F3" key's print is not in the centre of the key and it's little bit tilted to right.
I know it's a small thing but once I noticed it, it's really annoying me.
I put up the pic of it and do you think it's not straight?
And do you think I can get my "F3" key replaced if I go to Apple Store? lol ;p

Respectfully, I must disagree with you, Topher and K Beat.
The links that you have provided are for the old MacBooks and the old MacBook Pros.
The current keyboards are a completely different system, just like the MacBook Air.
If you could provide a link that shows how this has been done to a current MacBook Pro, I too would be most grateful.
Having spoken with Apple, and having reviewed the Ifixit review, I am confident that it is not possible, except in the manner that I had previously written herein.
Message was edited by: LukeD

Similar Messages

Hi my Canon ix6550 has started to stop printing in the middle of a job, what can I do?

Hi my Canon ix6550 has started to stop printing in the middle of a job, what can I do? If I turn off the printer and turn it on again it will print but then it will do it again. Help please.

I have tried re-installing the software and have unplugged and replugged the USB cable but to no avail. It keeps stopping after printing a couple pages. Is there no one from Cannon who can help me??

Strange characters and symobls print in the middle of a print job. Help.

In the middle of a print job, whether one page or several, it starts printing strange characters and symbols until the end of the job. It will do this in the middle of the page, or after printing one line of English and the rest of the page in gibberish.
It usually does this while printing off bank statements from the internet or a pdf file pulled from the internet. I don't think it has ever printed any of my documents.
However, it has done this while printing a bill received as an attachment to an email from a friend.
The next print job will usually be back to "normal". But one day, it did this many times during the day. Frustrating!
Appreciate any help.

I had this happen to me with a PDF file once. I called Support at HP,
and they told me it was because I had labeled the PDF as "text" when
it actually has (technically) "pictures" in it -- the printer didn't know how
to print those "pictures" (symbols?) as "text," so it came out as gibberish.
Perhaps there's a teckie here who can tell you more eloquently. [And
what to do about it!]
HTH!

Hp officejet pro 8600 plus stops printing in the middle of printing

I have the HP Officejet Pro 8600 Plus, it is setup wireless. It will print fine sometimes then it will print half of a page then pause or stop ???? I am using my IMAC computer. Has anyone had this problem, I am wasting too many sheets of paper.

yes, I have the same problem... and as I print many Invoices at a time, it really slows things down. It is wireless as well. It never did this at the beginning. It's only a month old.... where's the fix please HP!!!!????

Include text to be printed in the middle of main window

hi Gurus,
In SAP script - i have used include text ( which is a picture ) which i need to bring it nearly to the center of the main window. ie.,
/: INCLUDE IMAGE1 OBJECT TEXT ID ST PARAGRAPH P1
paragraph p1, i have made the alignment as centered.
and i have changed it to
/: include zhex-macro-image1 object text id st ----> also didnt work
posnr matnr then this image should come.
but still the image is coming in the begining of the new line. i want it to be continued with the previous line.
please guide me.
thanks.
Sakthi.

>
sakthi sri wrote:
> hi Prakash,
>
> i already did what u said. but the problem is that image should come only for that material. if suppose that material is going to come as the last material then how that image will come in the last. it always comes in the same window only what we difined. thats why i am trying to push it in the main window itself.
>
> did u got my problem?
As i understand the image is to be shown conditionally.
Try:
{code]
/: IF posnr = 'the position you want' AND matnr = 'matrn you want'
/: INCLUDE IMAGE1 OBJECT TEXT ID ST PARAGRAPH P1
/: ENDIF
{code}

Macbook Pro 15inch Volume, brightness keys not working (All the special F keys)

Hello,
I have this problem on my MBP where my Fn (Function Keys) on the top row of my keyboard don't work properly. I use these keys all the time to adjust brightness, keyboard LED brightness, pause, play and volume but they aren't working anymore. When I press F12 it shows the dashboard. I already have the 'Use all F1, F2 ect. keys as standard function keys' unchecked in System preferences, Keyboard. I am on a bootcamped MBP but mainly use the Mac OSX. This problem is occuring on Mac OSX not Windows. I have not dropped my MBP to damage it or anything like that. I have installed 16GB Ram and the Seagate Momentus 750GB Hybrid SSD a few months ago. Anyone know how I can fix this?
Any help will be extremly appreciated!
- Kieran/Paul

Check the setting in Keyboard, Keyboard Tab, that the "Use all F1, F2, ect. keys as standard function keys" isn't checked.

Hp 8600 quits in the middle of a print job

I have an HP 8600 that when I send a large print job stops printing in the middle when I print from mail merge. I get no error message on the computer, it just stops printing. When I check the print job status it gives me an "error - sent to printer" message, but there is no error message on the printer. I restart the print job from where it left off and it will print a few more and give me the same error message. So I restart again from where it left off and it will print for a little bit more and stop with another error message. Each time I restart the printer prints less and less of the job. Say I have 100 entries to print, I'll get 50 the first time, then 25, then 15, then 5 then...well you get the idea. Its more than a little frustrating.
I forgot to mention I am working on a 32bit Windows 7 premium system loaded on a Toshiba Satellite
I also forgot to mention that when it stops, the last page it prints is blank.

Hi hp_issed & TXGabe,
I understand that both of your HP Officejet Pro 8600 printers are not able to print correctly and quit in the middle of jobs.
What is the firmware version of the printer? click here to find out how to retrieve it.
Which Windows operating system are you running?
Is the printer connected via USB, ethernet or wireless?
Is the power to the printer connected directly into a wall outlet or a surge protector?
Thank you,
I worked on behalf of HP.

Printer stops in the middle of a page

stops printing in the middle of a sheet of paper and error code 0xb981b005 165:hw_interupt-hwv2.c comes up. The printer still says it is printing, but won't cancel or turn off. This has happened over and over. We unplug it and sometimes it will start and print a few things left in memory and then stop in the middle of a paper. Now the error code is 0x8810a620. We really like this printer and will appreciate any help you can give us. Thank you.
doc37324

Hi doc37324,
You don't indicate which printer that you have. Depending on the printer, there is a list of Ox error codes and documents for troubleshooting the associated codes. Most of the codes associate with an ink cartridge failure, but not always.
You could find your product support page for your product and input 0x in the search field. In some cases, two documents might show up. One of them walks you through how to reset your product. I've attached the link to that one here. I believe it is for most Officejets and Photosmart printers.
0x error on front panel
To find your product page, insert your product name at this link and then type in 0x in the search field on the product page:
http://www.hp.com/#Support
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Set reference point for multiple objects in the middle of the document

Hello Community,
I want to mirror a layout.
So I:
1. Select all the objekts
2. Set the reference point to the middle
3. Mirror the objects
BUT
The reference point is the middle of all the OBJECTS. That leads to several objects crossing the border of my document because the layout isn't spread out evenly.
I want to middle of the DOCUMENT to be the reference point. How can I do that?
Thanks
Christian

Have you fiugured this out on your own?
I just played around a bit and found a method, but it's not exactly intuitive. Select the object(s), then switch to the Rotate tool. The center of rotation will be defined as one of the transformation handles, but you can drag it to anywhere you like, so move it to the point that you want as the center of your mirror. Hold down the Alt/Opt key, and click the reflect button to make a mirrored copy. Without the modifier key the original objects will mirror their position around the repositioned reference.

Canon MX340 won't print pictures the size i would want them to

I am trying to print photos off of my iPhoto to my Canon MX340 printer. I have set it so there is 4 pictures to a page. I am not able to print them the size i want them to and i really want to know why! They are only printing in the middle of the page. if you could help it would be much appreciated

Are you using the iPhoto print dialog to set the sizes of the 4 images? If yes, what do you have selected as the Paper Size and Print Size?

My computer shows the wrong reg key inslde i cant read the sticker what can i do

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer does not have the correct registration key needed to update your system to Windows 10, and I would be happy to assist you in this matter! To find out the product activation key for your computer's version of Windows, please contact our technical support for further assistance in this matter by clicking the link below to get the support number for your region.
www.hp.com/contacthp/
I hope this helps!
Regards

My computer has the wrong registration key displayed inside and the one on the outside,(the sticker)there is one letter i cant read because it is worn. How can i get the original reg key before the upgrade on the 29th?

Music starts playing in the middle of a song

u have tried everything that i can think of. taking all of the music off and putting it back on, the little check mark box in options right on itunes, everything...
please help me this is really upsetting me it is really annoying to have your songs always start in the middle or wherever you left it last...

well, if you have the remember playback position checkbox checked, it will resume the song from the last point you were playing it at. try turning that option off and see what happens.
also, in the same area as the option above, what are the start and end times for the songs? if start time is not 0:00, it will not start from the beginning...

Will zeroizing and regenerating the Default-RSA-Key affect any other general purpose keys on my ASA 5545x?

I have an ASA 5545x that is a production device for receiving all AnyConnect VPN traffic for our organization. We purchased and installed a Comodo certificate to create the trust level necessary for our employees to connect. I'm attempting to enable SSH on the device for management purposes, but the current <Default-RSA-Key> does not allow me to initiate a valid SSH session. I have encountered this issue on other ASAs within our organization, and it hasn't been an issue to simply zeroize the current key and regenerate it to restore the ability to SSH to the devices. Where the snag comes in is that this 5545x is the only ASA that has a key installed that wasn't self signed. With that in mind, I have a few questions about whether 3rd-party signed keys are dependent on the self-signed keys on the device. I intend to zeroize both the <Default-RSA-Key> and the <Default-RSA-Key>.server certificates if they will not affect my VPN-associated Comodo key.
Does the Comodo key depend on other keys existing on the ASA?
Am I free to zeroize only the <Default-RSA-Key> without affecting the VPN associated Comodo key?
Here is the result of the command "show crypto key mypubkey rsa" :
Key pair was generated at: 12:02:29 CDT Aug 19 2014
Key name: <Default-RSA-Key>
Usage: General Purpose Key
Modulus Size (bits): 1024
Key Data:
<Redacted>
Key pair was generated at: 10:16:52 CDT Sep 20 2012
Key name: my.comodo.key
Usage: General Purpose Key
Modulus Size (bits): 2048
Key Data:
<Redacted>
Key pair was generated at: 01:35:42 CDT Jul 30 2014
Key name: <Default-RSA-Key>.server
Usage: Encryption Key
Modulus Size (bits): 768
Key Data:
<Redacted>
Thank you to any and all that assist me in understanding how the ASA handles certificate keys.

As long as the Comodo-signed certificate is bound to the my.comodo.key private key (i.e. you used that key when generating the certificate signing request), you should be fine to zeroize the Default-RSA-Key. The latter should ideally only be used for ssh access.

Difference Between the Two Delete Keys

I am brand new to the Mac ecosystem. Having loved my iPhones for the past two years, I have been wanting more Apple. So this past Friday, I purchased the Mac mini. Thus far, I love it, but there is a lot to learn since I have been living in Windows/Microsoft my entire life.
I am currently in the process of exploring and setting up my Mac mini, and, for some reason, iTunes decided to duplicate portions of my library. I'm not sure why, as there is no rhyme or reason to the particular files that were duplicated; either way, I think I have that issue under control.
However, when I tried to delete some of the duplicate files from the directory with the delete keys, nothing happened. With some research, I discovered that Command-delete was the necessary keystroke. It still did not work because I was trying to use the delete key next to the end key; I then tried the 'backspace' delete key, and that did the trick. So, I am wondering what the difference is between these two seemingly identical keys.

wyldoxz wrote:
So, is there any reason why Command-delete(backspace) will delete a file, but Command-delete(forward) will not? My lifetime in Windows has made me accustomed to certain keystrokes (I am heavily keyboard-orientated).
Yes, they are different keys. Pressing one generates the key code that is tied to the delete shortcut. The other generates another key code which is not tied to the delete shortcut.

My keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random.

my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.

No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair.

Is your key simbols printed in the middle of key?

Similar Messages

Maybe you are looking for