Is your rotation lock stuck in one mode (landscape or portrait)?

Mine was. I use the switch on the side of my iPad 2 to lock the rotation mode, but when I turned off the switch today, the iPad remained locked in whichever mode I started with!
If I unlocked my iPad in portrait mode, then it would stay there, even when the switch was unlocked. Same thing if I started with landscape. Looked everywhere for a solution, but I couldn't find it!
What I did find eventually is that all I needed to do was to clear the iPad's cache for it to start working properly again. An Apple genius tipped me off to this simple troubleshooting step a while ago and it has resolved a myriad of problems.
Hold the power-up switch for 5-10 seconds until you see the red "swipe to power off" appear. Swipe it to power off.
Hold down the power-up switch until you see the Apple logo appear and let it power up normally.
That's it! So simple, yet it clears a whole host of mysterious issues related to memory that you would otherwise end up scratching your head over!
I think I'll use this cache clearing method every couple of days just to be safe....but are there any hidden issues where this might cause a problem? I can't imagine what they might be....

I just had the same rotation lock issue and a reboot fixed it. But even though this solved it, I won't accept this a fix for the issue. So if it happens again, I'll just return the iPad to the store!

Similar Messages

  • IPhone still stuck in headset mode? Try this.

    So your iPhone is stuck in headset mode. No sound from earhole speaker, no sound from external speaker unles you use speaker mode during a call. When you change volume, the volume icon says ringer(headphones) even though no headphones are plugged in. Every time you plug in your headphones, the ipod function starts playing songs, and stops when you unplug.
    You've tried cleaning the jack. You've looked at previous posts in this forum, and at the knowledgebase.
    http://discussions.apple.com/thread.jspa?messageID=6598659
    http://support.apple.com/kb/TS1205
    http://hackint0sh.org/forum/showthread.php?t=18044
    None of these suggestions have helped, and you don't want to hard reset your phone. This is what i think worked for me.
    1. Plug in headset when iPhone is locked.
    2. Hold down the power button so that the "slide to power off" bar appears.
    3. Remove the headphones.
    4. Push the "Cancel" button at the bottom of the screen.
    5. Go to the phonepad and see if pressing the buttons now produces sound.
    (It's possible that I've forgotten something that I did, so the next time my phone locks, I'll try the same method again and update this post. Unless someone else is having the problem and wants to verify.)
    ~ Matthew Lowe

    The root cause is either the presence of lint/dust in the switch or the inadequate resilience of the spring.
    Nod, that's the cause of a similar problem, and cleaning the jack tends to help. My problem is a software problem, though, so cleaning and repeatedly inserting the headphones won't help.
    With the problem I have, the iphone responds to the headphones being inserted or removed, so it knows they're there (or not there) but it fails to switch the speaker output.

  • Stuck in safe mode on windows 8.1. and it is not recognizing my password, so i cant get into anywhere to sort it.

     NORTON WERE DOING A REMOTE ASSIST, WHEN THEY HAD TO RESTART MY LAPTOP, BUT WHEN ASKED FOR MY USER NAME PASSWORD IT WAS SAYING EITHER YOUR U/NAME, OR P/WORD IS INCORRECT. SO NORTON COULDN'T HELP. SO I CONTACTED MICROSOFT TO GET A NEW PASSWORD WHICH
    WAS EASIER THAN I THOUGHT. BUT WHEN I TRIED ENTERING IT, I WAS STILL GETTING THE SAME WRONG U,N OR P,WORD? "HELP" PLEASE....MY HEAD IS DONE IN AS NORTON WANT NOTHING TO DO WITH IT AND MICROSOFT ARE WANTING CLOSE TO £100 FOR DOING A REMOTE ASSIST.
     SOMEONE PLEASE "HELP"ME OUT OF HERE!!!

    Hi
    Please refrain from using caps! looks like you are shouting.
    You say that your machine is stuck in safe mode. when you boot does it go straight there?
    Good read on accessing the advanced options and repairing your machine.
    http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • TS1441 ipod touch stuck in recovery mode

    attempted to upgrade to OS8 and my ipod touch is stuck in recovery mode

    The best way to get out of this situation is to use a well-known tool called TinyUmbrella.
    First of all download TinyUmbrella  http://thefirmwareumbrella.blogspot.in/
    Now, making sure your device is connected to your computer, launch TinyUmbrella
    It will automatically detect that your iPod is stuck in recovery mode
    Select the Exit Recovery button and it should throw your iPod touch out of recovery.
    Alternatively, you can right-click on your iPod name from a list at the side
    of TinyUmbrella and select Kick out of recovery.

  • IPad 3 stuck in Recovery mode while trying to upgrade

    I attempted to upgrade my iPad 3 and received the error message that there was not enough memory. Linked it via USB to iTunes on PC laptop (updated iTunes to latest version). Error message said unable to upgrade the iPad, my only option is to Restore. However, that will erase all my data and settings which I have not backed up. Now I'm stuck. Either restore and lose all or leave iPad as is ... only problem with the latter is that the iPad is stuck in Recovery mode and everything I have tried does not release it. Would appreciate help with this as I now have a non-functioning iPad! Thank you.

    Hello ardsdon,
    Thank you for using Apple Support Communities. 
    I see your iPad is stuck in recovery mode. The following article addresses putting your phone into recovery mode and restoring it. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    Jeff D. 

  • Hp Pavillion windows 8 stuck in safe mode- no display

    My girlfriends pavillion notebook has the win 8.1 upgrade on it.  It came with win 8.  The display is broken and she has been using a monitor connected via the HDMI port.  She was having performance issues, freeze up, delayed response type stuff.  Bad enough I decided to restart in safe mode to work on it.  I did so without thinking about the HDMI port not being enabled in safe mode. It was actually a Safe mode/minimal restart. So now I can not get it out of safe mode because I have no display without the HDMI port.  Any suggestions would be appreciated.  I have tried a hard boot, where you take out the battery, disconnect everything and hold down the power button.  Though highly recommended several times she did not make a start up disc or recovery disc.

    Hi
    Please refrain from using caps! looks like you are shouting.
    You say that your machine is stuck in safe mode. when you boot does it go straight there?
    Good read on accessing the advanced options and repairing your machine.
    http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • HT4623 After updating iPhone 4, it is stuck in recovery mode?

    iPhone 4 has ios 5 and finally decided to update it. Did it over wi-fi and after it downloaded the pic insert usb to itunes popped up. Clicked restore and update and After the software downloaded nothing happened. it went back to the orignial screen with the pic still in recovery mode telling me to connect usb to itunes. Everytime I update something horrible happens!!! You think i would have learned my lesson by now ugh!!! HELPPP!

    Hi nikhil bajpai,
    If your iPhone is stuck in recovery mode, you can restart your device.  Then try updating the iOS software again.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/HT201263
    f you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    https://support.apple.com/en-us/HT201412
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support. 
    I hope this information helps ....
    - Judy

  • TS1441 Ipod classic stuck in disk mode

    My ipod classic is stuck in disk mode, computer/itunes won't recognize, i've tried resetting, but either says "ok to disconnect" or "restore with itunes."  When i plug it in, the computer nor itunes recognize that it's plugged in.... please help.

    The best way to get out of this situation is to use a well-known tool called TinyUmbrella.
    First of all download TinyUmbrella  http://thefirmwareumbrella.blogspot.in/
    Now, making sure your device is connected to your computer, launch TinyUmbrella
    It will automatically detect that your iPod is stuck in recovery mode
    Select the Exit Recovery button and it should throw your iPod touch out of recovery.
    Alternatively, you can right-click on your iPod name from a list at the side
    of TinyUmbrella and select Kick out of recovery.

  • My brand new iPad mini won't rotate I have done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested.

    My brand new iPad mini won't rotate done factory reset still not working. If I lock and unlock on landscape or portrait it remains in that mode. Any ideas pretty sure I've tried everything suggested such as off/on, reset, reboot, double checked lock off. It did work and I changed wallpaper and stopped motion, not sure if this related

    Reset all settings. Settings>General>Reset>Reset All Settings. Your iPad will reboot on its own. You will have to enter all of the device settings again, but no data will be lost.
    I eould not spend a whole lot more time trying to fix this, if the device is really brand new. I would take it back to where you bought it, bring the box, the charger, the cable and your receipt and if they can't get it fixed, return it and get another one.

  • My printer, hp photosmart c4200 all-in-one is stuck in scan mode

    My HP printer--HP Photosmart C4200 All-in-One is stuck in scan mode.  I have tried holding start button 60 sec, unplug from power supply, hold while I plug back in with no luck.

    Hi @Bungybill,
    Welcome to the HP Forums!
    I understand that you cannot copy or scan with your HP Photosmart 3110 on Mac. I am happy to help!
    For further assistance, I will need to know:
    The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
    If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. 
    If you make a copy, and lift the lid, do you see a light come on and the scanner bar move?
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • My iPod touch is stuck on one song in my play list when in the shuffle mode.  How do I fix this to shuffle through all the songs in that playlist?

    My iPod touch is stuck on one song in my play list when in the shuffle mode.  How do I fix this to shuffle through all the songs in that playlist?

    If you go to the Now Playing screen, the Repeat control is the the arrowed racetrack icon on the left side right below the scrubber bar. Tap the icon to change. It is white when Repeat is off.

  • My iPod touch is stuck in recovery mode and my lock button is broken what do I do

    My iPod touch is stuck in recovery mode and my lock button is broken what do I do?

    What happens when you connect to computer and restore via iTunes?
    iTunes: Restoring iOS software
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Lock screen and other app stuck on zoomed mode

    I noticed that my lock screen is stuck on zoomed mode. When I'm in my home screen it's in standard view. Also I'm having the same issue with my apps. Apps like Pinterest, Tumblr, Swarm, Twitter looks fine but other apps like Facebook and Instagram are all stuck on zoomed mode. How do i fix this?

    Hello iankyliu,
    It may be that the zoom accessibility feature has been enabled. The article linked below details how to go about turning it off.
    iOS: Home screen icons are magnified or large
    http://support.apple.com/kb/TS3129
    Otherwise, it may be Display Zoom that's enabled, which is explained in the iPhone User Guide.
    iPhone User Guide - Display Zoom (iPhone 6 or iPhone 6 Plus)
    http://help.apple.com/iphone/8/
    Cheers,
    Allen

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • Hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer  keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

    hi my ipod was working perfectly fine but i turned it on the net day and i was stuck in recovery mode ans my computer  keeps on saying one of the usb devies attached to this computer has malfunctioned and window dose not recognize

    https://discussions.apple.com/message/23791369#23791369
    https://discussions.apple.com/thread/5325044?tstart=0
    more
    https://www.google.dk/search?q=restore+iphone+error+29&oq=restore+iphone+error+2 9&aqs=chrome..69i57j0l5.4603j0j7&sourceid=chrome&espv=210&es_sm=93&ie=UTF-8

Maybe you are looking for

  • Getting error "Access via null" when running the web dynpro application

    Hi experts, I am getting the below error while executing my web dynpro application 500 SAP Internal Server Error ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE) I am getting the error only when I am calling a method

  • Do you have any kind of help that can be purchased?

    Does Adobe Photoshop Elements 11 have a service where I can receive selected step by step advice for a nominal fee? My question is simple, however; my problem is I'm not smart enough to know how to ask the question the correct way. All I want to know

  • Win7 dhcp client: sending options

    I am trying to change dhcp option 60 and 43 on my Windows 7 Cleint PC. The standard option 60 - vendor class identifier is set to "MSFT 5.0" and I would like to change it to a different value of "Siemens". Similarly I want to send a Vendor Specific I

  • V21 (N95-1 on 3 UK)

    Is there an imminent upgrade likely for N95-1 handsets that are on the 3 network in the UK? It is saying that my most recent software version is 20.0.015 instead of 21. Solved! Go to Solution.

  • Syncing photo albums

    I have recently updated iPhoto and also had to restore my iPhone 4s.  Since then, I noticed that my iPhoto albums on my iPhone no longer have the correct photos in them.  The albums are correct in iPhoto.  I also noticed that the last 12 months album