Is Z report needed for FBCJ Balance?

Hi,
There are 5 cash journals and client needs the balance for all cash journals along with Responsible Person, Balance, Debit and Credit.
In FBCJ I couldnt found, is there any report available with above requirement??
Anybody can suggest please.
Raju

Hi,
Are these five cash journals assigned to same GL or different GL??
Using that you can consolidate all the five cash journals..
Cheers
Raghu

Similar Messages

Financial Report Template for Trial Balance

Dear All,
 I was prepared the financial report Template, for trail Balance as per Schedule VI (6) after completation of template i exucute the trail balance by the using of above template.
For the execution of the above report i used the selection cretario i taken as "Annual Report" and i run the report - it has execuatated successfully.
After that i changed my selection cretaria as a "Quartlly" and i run the Report,
but in that report is showing some values , these values not showing in Annual Report.
 Please Guide to me.
Message was edited by:
 Marc Riar

Hi Atul,
SBO uses two different templates for the Trial Balance Report based on the Period Selection.
Annual Report
Template: CBL1 - Trial Balance
Quaterly, Monthly, etc.
Template: CBL4 - Periodic Trail Balance
So you have probably customised CBL1 (per Schedule VI (6)) which works for Annual.
You have to also customise CBL4 - Periodic Trail Balance the same way so that it can work for the others.
Regards
Suda

Report needed for storage costs in WM

Hi All,
I need a report for the storage costs for utilising the warehouse by plants. Cost of space utilised per m3 will be provided in selection screen. For each material the volume should taken from material master. Warehouse will be utilised by three plants and report needed to calculate the space occupied by the materials in warehouse per plant per month. I am not able to find the logic to calculate average space utilised(as day to day there will putaways,transfer postings and picking).All stocks to be taken into consideration.Let me know how to proceed.
Regards,
Manik

Dear Experts,
Cud u plz throw some light on this...
Regards,
Manik

Customer Master Report needed for jurisdiction, tax code, and district

I am trying to pull a customer master report and need to include the following fields:
Name (NAME1)
Account (KUNNR)
Jurisdiction ( TAXJURCODE)
Tax Code (TAXKD)
District, which is County for US addresses (CITY2)
I haven't seen a report with CITY2 and have tried S_ALR_87012180 or opening KNA1, KNVI, etc.
Any ideas?
Thanks,
Michelle

No there is not such report or transaction.
You may look at tables KNA1 + ADRC.
In table KNA1 there are fields ORT01, ORT02, COUNC and CITYC that could help
Otherwise you must link KNA1 and ADRC with field KNA1-ADRNR = ADRC-ADDRNUMBER
Sorry
BR
Alain

Report needed for infotype changes

hi all
i need a standard report that provides employee numbers for which master data changed in a particular infotype.
plz suggest
regards
niki

Hi nikki,
First in Spro : PM->PA->Tools->Revision-> Set up change doc: Determine log of which infotypes you wanna see.
Then execute report S_AHR_61016380.
Regards,
Dilek
Edited by: Dilek Ersoz on Aug 6, 2008 10:01 AM

Help on report writer for Trial balance report

Hi
client is using report writer report for TB report say report ZTB.Now problem is when new financial year started on 1/4/2007 it is not carrying opening balances from previous financial year.
Existing report writer report is linked to Macros developed for complete financial reporting.So existing format can't be changed i.e addition of new columns etc.
Is there any place staright away I can make a change so that previous year balances can be added as of 1/4/2007?
I am new to report writer.
Can some one please help me how resolve this!!
If any one has documentation with step by step report writer please send me to [email protected]
regards

Hi
look here
http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22db643c611d182b30000e829fbfe/frameset.htm
assign points as a way of thanking
Regards,
Zaid

Report Painter for GL balances

Dear Experts,
I would like to create a report through report painter, which gives the GL balances Business Area wise under Profit centers.
I'm using the 0FL New General Ledger Library.
I'm able to get GL balances either Business area wise or Profit center wise.
I'm not able to get GL Balances with Business area and Profit center.
Requirement is like this.
Under Profit Center, we want Business area wise - GL Balances.
Profit center
Business Areas
GL balances
Kindly help me to create such a report
Thanks
Om
Edited by: Om Prakash Arjuna on Nov 7, 2011 4:39 PM

Hi,
It seems it is not complicated.
Crate Report:
Row / Column: PC&BA
GL Accounts
from the above ex, crate report Row with Account Number & Calumn PC&BA
Stil you have issue plz revert with clear requirement.
Regards
Viswa

Report needed for overall view of update compliancy

I've been asked to provide a custom report to give an overall status for the update compliancy for the servers in place.
Have been fiddling about in sql mgmt studio and kind of understand where to get the information from, but am missing something. so I was hoping someone could point me in the right direction
I realize that this kind of report might take some querying time, but this is what the customer wants: instead of him going to the builtin report compliance 7 (category sw updates - compliance A) where he has to select a collection AND a baseline AND a compliance
status, he wants to obtain a list of all server systems being compliant to some server baselines and a list of all server systems being non-compliant to some server baselines
currently the sqlcode i Have to show the compliant servers, is:
SELECT
     v_R_System.Name0
AS Servername,
v_GS_OPERATING_SYSTEM.Caption0
AS OS,
v_ConfigurationItems.CI_ID,
v_AuthListInfo.Title,
v_StateNames.TopicType,
                      v_StateNames
.StateID,
v_StateNames.StateName
FROM
         v_ConfigurationItems
INNER
JOIN
                      v_AuthListInfo
ON v_ConfigurationItems.CI_ID
= v_AuthListInfo.CI_ID
CROSS
JOIN
                      v_R_System
INNER
JOIN
                      v_GS_OPERATING_SYSTEM
ON v_R_System.ResourceID
= v_GS_OPERATING_SYSTEM.ResourceID
CROSS
JOIN
                      v_StateNames
WHERE
(v_R_System.Client0
= 1)
AND(v_R_System.Operating_System_Name_and0
LIKE
'%server%')
AND
(v_AuthListInfo.Title
LIKE
'%server%')
AND(v_StateNames.TopicType
= 300)
AND(v_StateNames.StateID
=
'1')
ORDER
BY Servername
BUT if I now change the stateid to 2 in the query I get the same amount of rows back (being 134 servers with an sccm client times 4 server update groups)
so my problem is: how and when do i make the correct join here ?

I was thinking that it might be better to use the assignmentstate views, and I quickly came up with this alternative:
SELECT
     v_R_System.Name0
AS ServerName,
v_CIAssignment.AssignmentName
as
'Deployment Name',
v_StateNames.StateName
FROM
         v_AssignmentState_Combined
INNER
JOIN
                      v_R_System
ON v_AssignmentState_Combined.ResourceID
= v_R_System.ResourceID
INNER
JOIN
                      v_FullCollectionMembership
ON v_R_System.ResourceID
= v_FullCollectionMembership.ResourceID
INNER
JOIN
                      v_CIAssignment
ON v_AssignmentState_Combined.AssignmentID
= v_CIAssignment.AssignmentID
INNER
JOIN
                      v_StateNames
ON v_AssignmentState_Combined.StateID
= v_StateNames.StateID
WHERE
(v_StateNames.TopicType
= 300)
AND(v_StateNames.StateID
= 1
OR
                      v_StateNames
.StateID
= 2)
AND(v_FullCollectionMembership.CollectionID
=
N'D01003FE')
ORDER
BY servername
at first glance this produces what I want, let me check with the customer.
you guys agree with that or not?

Report needed for checking where pers. nr. is used in SAP

Hello,
I am currently searching if there is a report available which is checking where in SAP a Pers. nr. is used. e.g. partner in an open order or responsible of a costcenter or appraiser in an appraisel, open workflow document etc. This is needed to confirm that all the tasks of the emplloyee has been transferred to another employee before the leave action is made.
With kind regards,
Ronald van Eeuwen

Hi,
There are more than 9000 programs and classes where field PERNR is used.
You have to be more specific with your question.
You can see all programs where PERNR is used by starting transaction SE11, enter data type PERNR, display and then CtrlShftF3.
Cheers

Report needed for Red (High) Incidents only

Hi,
My boss would like me to be able to run a report that includes red (high) incidents only. I've looked through all of the possible reports and can't find anything remotely close to his request. Any help would be appreciated.
Thanks,
Kerry

Kerry;
You should be able to create a query to gather only red severity events, and then make this query part of a report.
In the query, you will want to click the "ANY" under the 'Events' column. In the resulting pane, you will want to set the "Restrict to Severity" drop-down to "Red". From there you can further tune the query to restrict it to specific reporting devices, events, etc. This query should return only red severity events. From there, you can make this query a report by clicking the "Save As Report" button.
Scott

CF8/JRun4 Cluster for Load Balancing

Does anyone have an example of how to set up a CF8/JRun4
cluster for load balancing?
I have three servers:
x004 - Linux - Apache2 (10.0.0.54,10.1.0.54)
x020 - Linux - JRun4/CF8 (10.0.0.70,10.1.0.70)
x021 - Linux - JRun4/CF8 (10.0.0.71,10.1.0.71)
Every server in our network has two network cards. One
network card is attached to 10.0.x.x which has a gateway to the
internet and runs at 100Mbps and is firewalled, and the other is
attached to 10.1.x.x which runs at 1Gbps and is internal with no
gateway. I'm trying to set it up so web traffic arrives on
10.0.0.54 into Apache and mod_jrun20 bootstraps a cluster named
STST using 10.1.0.54 which consists of STST_x020 coldfusion server
running on x020 and STST_x021 running on x021. I want the
communications between JRun4 on x020 and x021 to occur on the
10.1.x.x network and eventhough JRun and ColdFusion will only use
the 10.1.x.x network I still need the 10.0.x.x network card
attached for other purposes which require a gateway. I have
installed JRun4/CF8 about 10 times already and it seems I have no
control over what network JRun4 clusters on... sometimes it will
communicate on one, sometimes the other and without being able to
set which network is being used there always seems to be "network
error" on at least one of the two CF8 servers. I was able to get
everything working fine by disabling the network cards on the
10.0.x.x network and re-installing everything... but as soon as I
added the network cards back the whole thing was broken again.
How is this supposed to work? Most of the examples are either
no clustering or clustering on the same machine with Apache running
on the same box... I don't see any clustering across machines
examples.
How do I install a connector on a web server which doesn't
have JRun on it and get wsconfig to connect to a multi-machine
cluster when wsconfig only accepts a single IP address as a host
and the cluster is not listed?
How do I get JRun to bind to a specific network card?
Does this work if I choose a J2EE server other than JRun?
Any help anyone can provide is greatly appreciated. I'm
getting close to giving up which means staying on the non-clustered
environment and figuring out how we can deal with scalability by
switching to something else.

The article at
http://www.adobe.com/go/1e8e9170
is specific to configuring two or more cluster nodes that reside on
separate networks, e.g. 10.0.1.0/24 and 10.0.2.0/24. (The article
doesn't state it, but you can only use unicast peers if your
cluster nodes host a single instance of JRun or multiple instances
of JRun in the same cluster domain. When performing unicast
discovery, JRun looks for all Jini groups and not just the cluster
group.)
Anyhow, that's not your problem. The simplest solution is you
haven't enabled the jrun.servlet.jrpp.JRunProxyService service. I'm
most familiar with the Windows version of JRun, but I'm assuming
the directory structure is similar across platforms. In
<jrun_root>/servers/<name>/SERVER-INF/jrun.xml, set the
deactivated attribute of the jrun.servlet.jrpp.JRunProxyService
service to false and restart JRun. You should now see JRun
listening on the appropriate port. (The default for the first
manually created instance is 51000.) You can limit the proxy
service to a single interface using the interface attribute.
If you have enabled the proxy service, verify your security
settings in <jrun_root>/lib/security.properties. It's usually
best to limit access to specific hosts. Comment out the
jrun.subnet.restriction parameter and set the jrun.trusted.hosts to
the IP address of your web server, e.g. 10.1.0.54.
Forcing all JRun processes/services to listen on a single
interface isn't difficult, but it does require modifying quite a
few configuration files by hand. If you need assistance with that,
I can elaborate.
Configuring the JRun module under Apache is pretty
straightforward. If you're not using virtual hosts, it's very
simple. If you are using virtual hosts, it's still simple, but your
JRun configuration can be virtual host-specific.
On your Apache server, you'll want to create a directory
structure for the JRun module. I'll assume
/opt/jrun/lib/wsconfig/1, but you can use anything you want. Once
the directory structure is created, extract the appropriate JRun
module from wsconfig.jar to the new directory. You're most likely
interested in the Apache 2.0 module,
wsconfig.jar/connectors/apache/intel-linux/prebuilt/mod_jrun20.so.
Let's assume you've extracted the module to
/opt/jrun/lib/wsconfig/1/mod_jrun20.so. Your Apache service account
should have read, write, and execute permissions on the
/opt/jrun/lib/wsconfig/1 directory.
The JRun module configuration is normally appended to your
current httpd.conf file by wsconfig. Here's a sample configuration:
LoadModule jrun_module
"/opt/jrun/lib/wsconfig/1/mod_jrun20.so"
<IfModule mod_jrun20.c>
JRunConfig Verbose false
JRunConfig Apialloc false
JRunConfig Ssl false
JRunConfig Ignoresuffixmap false
JRunConfig Serverstore
"/opt/jrun/lib/wsconfig/1/jrunserver.store"
JRunConfig Bootstrap 10.1.0.70:51000
#JRunConfig Errorurl <optionally redirect to this URL on
errors>
#JRunConfig ProxyRetryInterval 600
#JRunConfig ConnectTimeout 30
#JRunConfig RecvTimeout 30
#JRunConfig SendTimeout 30
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr
.cfswf
</IfModule>
You may also want to update your DirectoryIndex directive
with an appropriate index page, e.g. index.cfm.
After the first request to a page handled by the JRun module
is received, the module will query the boostrap server,
10.1.0.70:51000, for a list of cluster peers. If you've configured
your cluster correctly, a line similar to following will be written
to /opt/jrun/lib/wsconfig/1/jrunserver.store:
proxyservers=10.1.0.70:51000;10.1.0.71:51000
You can create/edit this file manually as well.
Unfortunately, the bootstrap option only accepts one server. If
your bootstrap server is down, the JRun module will use the values
in jrunserver.store directly, if the file exists.
Here's a complete list of JRun module options:
metrics *
debugger *
ssl *
verbose
traceflags
serverstore
bootstrap
errorurl
apialloc
ignoresuffixmap
proxyretryinterval
connecttimeout
recvtimeout
sendtimeout
sslcalist
Options flagged with an asterisk can only be configured at
the Apache server level. All other options can be configured at the
server level and/or the virtual host level. The usage of these
options is in the JRun documentation, and the JRun module source
code is included in wsconfig.jar. Keep in mind that versions of the
JRun module shipped prior to ColdFusion 8 were coded to assign the
connecttimeout and sendtimeout options to the socket connection
timeout. Whichever option appeared last in your configuration ended
up as the final value. This has been fixed in ColdFusion 8 and
presumably the next release of the JRun updater.
I think that's a good start. If you need more information or
can't find what you need in the JRun or ColdFusion documentation,
let me know.
If you're looking for resiliency, I highly recommend
expanding your configuration to include a second web server and a
hardware load-balancer (preferably one that supports redudancy via
multiple paths and devices, e.g. devices from Cisco, F5, or Foundry
Networks). Often, however, running Apache on the ColdFusion
server(s) provides adequate performance, and round-robin DNS
records coupled with the ability to update DNS quickly in the event
of a failure may be all you need for load-balancing and
failover.

Please update the functional specifications for Vendor Balance Report

Dear All,
Please update the functional specifications for Vendor Balance Report with
proper descriptions.
Please include
1. How your selection screen should look like..
2. Output format ( in an excel sheet)
3. Logic for every field in the output format (viz. .. how do link the
vendors from the selection screen to the BKPf and BSEG tables, how do you
find open and closed items in BSEG , etc.)
Please avoid statements like 'The total value of all the break-up should
tally with the balance as shown in FBL1N for a given vendor for the given
day.'
You need to give the logic for the FBL1N, in that case.
Regards
Rama Mohan

Hello again,
Regarding having them update the specs, one can dream. Dreams are free. LOL. Hopefully the memory makers will update their specs as more makers start supporting a large memory configuration.
The 4GB sticks I am using are http://shop.kingston.com/partsinfo.asp?ktcpartno=KTL-TP667/4G
I did not do an extended test of the sticks in my MBP. Their home is in the ThinkPad I have because it is running Windows Server 2008 with Hyper-V.
As you can see from the link above, these little suckers are pricey. But consider the price of 2GB SoDIMMs were $950 when they entered the market a couple of years ago. The price will drop.
I asked the Kingston rep that sent these to me if online sites like newegg.com would have them soon. She indicated no, but the corporate buying sites like CDW and Zone would. So check around. They just started shipped a couple of weeks ago so be patient.
If you have any other questions, please stop by http://blogs.technet.com/keithcombs/archive/2008/07/05/testing-my-apple-macbook- pro-with-8gb-of-ram.aspx and ask there. I'll see them much more quickly.
Cheers,
Keith Combs
Microsoft

Report needed to conbine stock movement and corresponding balance

Hi Friends,
End user need a report to show stock movement trasaction and it's coresponding stock balance.
In MB51, we can see all the stock movements against one material, is there any way a report could show stocks' corresponding iventory balance under diffierent invenotory category (unrestriced,QC, Return and block) for each movement trasaction ?
Report needed like below
SLoc , MoveType , Material document, posting date, qty, unrestic bal, QC balance, return Balance, Blked Bal.
Thanks,
L

Hi,
Kindly take the help of abaper and create a customized report or also you can have query created in SQ01.
Hope this will help you !!!
Regards,
Krishna O

Hi masters, want bapi for customer balance report

HI Masters,
please can any one give reply about bapi whch one is using for developing customer balance report in webdynpro java
I want to see the customer balance report in portal through developing webdynpro java application only. for developing , i need bapi regarding customer balance report. Customer when he login the portal he has to view his ledger balance in portal.please give reply about the bapi to see customer ledger balance . we can do by transactional iview. but i need only through webndynpro java application
reply will appreciated.

Hi surya,
The tcode for customer balance report is FBL5N
BAPI_AR_ACC_GETKEYDATEBALANCE -
>Customer account balance at a key date .
Regards,
srikanth

R12(Payments)--Accounts Payable Trial Balance Report, Need Info.

Hi All,
We are trying to use the report Accounts Payable Trial Balance Report.
This is an XML Report in R12 now and has 4 different RTF Templates.
Can you please explain me how this report can be used in R12 and how does it selects the RTF template( from 4 different templates present) at run time.?
Thanks,

Hi,
In 11i we use to have a parameter to give the report in Summary or Detail
In R12 we have 4 options in templates to have Summary by Account, Summary by Supplier, Detail by Account and Detail by Supplier.
Report will not select the template automatically. The user needs to select the template before submitting the report.
Hope it helps
Regards,
Sridhar

Is Z report needed for FBCJ Balance?

Similar Messages

Maybe you are looking for