ISA 2006 slow response, connections timeout, maximum limit reached?

Hey guys,
I've been having an issue with a client's ISA Server for the past couple of weeks and haven't been able to understand why this is happening.
They have a couple of ISA Servers Enterprise Edition in an array. This ISA Servers give Internet access to the entire company. They have significant amount of traffic through a Cisco Iron Port that all the users proxy settings are configured to this device
and the Iron Port forwards the requests to the ISA Servers.
This implementation have been working fine for months, until a few weeks back that started to have slow response problems from the ISA Servers. Analyzing the reports from the ISA Servers, I've noticed an increased amount of traffic a few times this
has happened and mostly from the Iron Port. The Cisco people says this increase amount is due to the fact that the ISA Server stops responding and new requests are made at the moment from the device. We have configured the Iron port IP in the exceptions of
the Flood Mitigation Settings of the ISA Server, and configure it to take more than 20,000 connections.
Still after this configuration, the same problem raised a couple of days back. The ISA Servers stops responding and they need to be forced shut down and restarted to get them back to work.
There are also some errors from some other internal IPs that it reaches maximum connection limits, but these are about 10 errors like this only. I was thinking maybe there are some infected computers or something but they said that they scanned the ones
that show the errors and nothing is detected.
From the ISA reports of the time of the incident, I saw that it reached more than 15,000 concurrent connections. More than double of what it usually handles throughout the day.
I don't know if there is like a connection limit that the ISA can handle before it hangs of something?
Is there any ideas on what can be happening with this?
Thanks for any replies!
Eduardo Rojas

Hi,
Have you check the Event logs on the ISA Server? Any error?
You could use ISABPA to do some basic troubleshootings.
http://www.microsoft.com/en-hk/download/details.aspx?id=811
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Maximum limit reached

When I plug in my iPhone 5s to my PC, I get an error message that says "limit is reached for this device." Anyone with similar problems and know how to fix it?

This is the complete message: "iTunes could not connect to the iPhone" Therese iPhone" because the unit reached a maximum time limit."
There may be some wrong words because I translated from Swedish to English.

Slow response from DB

Hi ,
My database is 10.02.0.4.0 on Solaris 5.9.
We are using Oracle 10g AS as Application server to
host the Application. Whenever the end user trying to access the
application who got the very solw response. At the application level
we have configured enough settings on datasource and connection pool parameters.
At Oracle Level 150 session, Processes 300 has set.
what could be the reason for End user getting problem like "Slow response","Connection Tiemd out".
Any parameter need to change. When I getting this error, what is the appraoch i need to follow to mitigate these kind of error in future .
Thanks,
Tippu

I have a performance checklist at :
Re: Multiple Sessions Performance Issue …………
Hth
Girish Sharma

Internet is working very slow through ISA 2006 Srever

Hi,
We are using isa server 2006 for accessing internet service, but internet is working is very slow.
When we ping the public DNC its show the lot of delay time.
And in ISA alerts its display the following error messages:-
1."ISA Server is no longer experiencing a SYN attack".
2. The request was denied because the number of connections per second allowed for the [System] Allow DNS from ISA Server to selected servers rule was exceeded.
I am new for ISA 2006. SO, Plz provide required solution if anybody face such type of problem.
Thanks and regards ,
Ravi Singh

Hi,
Firstly, it is not recommended to configure a DNS Server on the External Interface of the ISA Server.
I suspect this issue may cause by some worm/virus infected computers from your internal network. Please run antivirus software on both ISA Server and internal clients.
Besides, I recommend you to check in task manager or performance monitor to see if there are Heavy disk load and resource consumption, high CPU load, high memory usage and high network bandwidth consumption issues.
You can also enable logging of traffic blocked by flood mitigation：
In the console tree of ISA Server Management, click General. In the details pane, click Configure Flood Mitigation Settings. On the Flood Mitigation tab, select Log traffic blocked by flood mitigation settings.
More information:
Overview of flood mitigation
http://technet.microsoft.com/en-au/library/cc995196.aspx
Best regards,
Susie

The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin

Hi There,
When i try to view info-path form item getting warning (This issue is not with all items but for some of them...)
"The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin............."
Thanks in advance!!
Regards
Vikas Mishra
Vikas Mishra

HI Vikas,
to resolve this do this from central admin
Ensure to follow the below steps.
                                         i.    Open
the central administration
                                        ii.    Go
to General Application Settings
                                       iii.    InfoPath
Form Services
                                      iv.    Configure
InfoPath Form Services
                                       v.    Click
on Data Connection Response Size
                                      vi.    By
default it is 1500 kilobytes
                                     vii.    Change
the Response Size in kilobytes (Increase the number).
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Outlook Exchange Directory Connection - Slow Response

Hi All
We are in process of migrating from Exchange 2007 to 2013. Clients are Outlook 2013.
Users who are migrated to 2013 are experiencing outlook timeouts regularly throughout day (we do not run in cache mode).
I am noticing that Outlook Connection is reporting slow response times for Exchange Directory connection (screen shot shown below) i.e. 1000ms or above. All other connections are fine.
When outlook times out - I notice that connection to Exchange Directory is the one that times out also.
I suspect a GC / DC issue - perhaps Exchange is querying GCs outside of site? and that's causing timeout? WAN connections between sites are slow (1.5Mb or below).
But my AD team tells me there is nothing wrong with infrastructure. :-)
Could someone assist me in identifying the cause?
Thanks in advance
Anthony

Hi Anthony,
Please use OWA to check whether the migration completed successfully.
I noticed that you are not under the Exchange Cached mode, please try to turn it to Exchange Cached mode to have a test.
Please try to run Outlook under safe mode to avoid some AVs and add-ins.
I also found an related blog, collect some information for your reference:
These default Keep-Alive intervals are NOTs home networking devices and/or aggressive network devices on the Internet. Some of those devices are dropping TCP connections after as little as 5 minutes (300 seconds)
of inactivity. When one or both of the two default connections are dropped, the connection to the Exchange server is essentially broken and not useable.
To address this issue, we are recommending setting a registry key on the Exchange CAS to change the default Keep-Alive from 15 minutes (900 seconds) to 2 minutes (120 seconds):HKLM\Software\Policies\Microsoft\Windows
NT\RPC
More details in the following link:
Outlook Anywhere Network Timeout Issue
http://blogs.technet.com/b/messaging_with_communications/archive/2012/06/06/outlook-anywhere-timeout-issue-and-recommendation.aspx
Please correct me if there is any misunderstanding.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Thanks
Mavis Huang
TechNet Community Support

Slow response when using Xcelsius web service connection witn input values

We've been very successful in using the Xcelsius Web Service Connection. We've recently moved forward toward using input values when calling a web service and having issues with response time. Without input values, it takes 3 - 6 seconds to retrieve and display the results in Xcelsius, but, when using the input values to the web service, it takes about 27 seconds for Xcelsius to retrieve and display the results. Does anyone have experience with fixing slow response associated with using input values for a web service connection?

Hi Sharone,
What's the version of your Xcelsius and BOBJ server?
I'm asking because using the last version of BOBJ server (BOXI 3.1 SP 3) you have new services on CMC just to help Xcelsius to work better with WebServices.
Regards,
Rodrigo.

Connectivity Error through ISA 2006 firewall

Hi all,
i have problem connecting to my main database for syncronization, when i try to connect my clinet machine to the server over the internet directly to my main server it works but when i try to connect trough the firewall it gives me TNS:operation timed out... even though i have 1521 & 1526 ports are open on my ISa 2006..
please suggest do i need further listenr configuration...
thanks in advance..

For 8i and a shared server architecture, such a configuration (init.ora) should work:
local_listener="(address=(PROTOCOL=tcp)(host=hostname)(port=1521))"
dispatchers="(address=(partial=true)(protocol=tcp) \
(host=hostname)(port=5000))(dispatchers=1)"
dispatchers="(address=(partial=true)(protocol=tcp) \
(host=hostname)(port=5100))(dispatchers=1)"
dispatchers="(address=(partial=true)(protocol=tcp) \
(host=hostname)(port=5200))(dispatchers=1)"
Listener's port is set to 1521 as usual, dispatchers are set to fix ports 5000,5100,5200 (port numbers as an example). These number have to opened by the firewall administrator.
Werner

TNS Listener Connecting issue through ISA 2006

We have Oracle 8i installed on?a Win XP Professional workstation, and pretty much as it comes - we haven't?changed many config. parms.
We have a basic ISA 2006 firewall, and when the Oracle machine is not behind it we can contact it without ay problems. However, when we put the machine behind the firewall we can 'tnsping' it, but cannot contact it with SQL*Plus
I have 1521 Port Opened in my ISA 2006 Firewall
i set USE_SHARED_SOCKET = TRUE under Windows registry on Oracle Server, Firewall & on the Client.
My tnsnames.ora is somewhat like this...
L.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = oracle.world)
(PROTOCOL = TCP)
(Host = 127.0.0.1)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
(SERVER = DEDICATED)
M.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = oracle.world)
(PROTOCOL = TCP)
(Host = 213.XXX.XXX.XXX)
(Port = 1521)
(ADDRESS =
(COMMUNITY = oracle.world)
(PROTOCOL = TCP)
(Host = 213.XXX.XXX.XXX)
(Port = 1526)
(CONNECT_DATA = (SID = ORCL)
(SERVER = DEDICATED)
I've run a trace on SQL*Net and the problem seems to be as follows:
1. The client contacts the server using its external IP address.
2. Oracle responds with a packet which contains the?INTERNAL IP address of the machine. (i.e. the machines IP address on our local intranet)
3. The client attempts to contact Oracle using the Oracle machine's internal intranet IP address.?Of course this fails because only the external address is valid outside the firewall.
4. SQL*Plus responds TNS-12535: TNS:operation timed out???
Can anyone suggest ....
what to be done now

I just went through something similar. Have you tried the setting to make request appear to come from the ISA server rather than the original client in the configuration rule? I'm not sure how you examined the packet, so I can't say my situation was exactly the same, but it sounds very similar and that solved it for me.

Slow Response Sun ONE 6.1 SP3 Win 2003

My Sun ONE web server is processing my JSP pages very quickly when serving one session at a time. However when there are 4 or more active sessions, it slows right down. Response time goes from 2 seconds (1 active session) to 60 seconds (multiple active sessions) for a single JSP page. I've been running the performance monitor to see if I can notice anything, but nothing seems to stand out. I have tried manipulating the Keep Alive settings and the Performance settings within the Magnus Editor but there hasn't been a noticable improvement.
I've recently upgraded to SP4 to see if this solved my problem, but there was no imporvement.
This server is an HP DL380 with dual 2.8GHz Xeon processors & 2 Gigs of RAM. There is a lot of available disk space. I'm running Windows 2003 and it's up to date with all the latest patches.
Anyone have any ideas or experienced this before?
I've attached the output from my performance monitor:
webservd pid: 4280
Sun ONE Web Server 6.1SP4 B01/20/2005 21:34 (WINNT DOMESTIC)
Server started Thu Mar 03 09:41:06 2005
Process 4280 started Thu Mar 03 09:41:06 2005
ConnectionQueue:
Current/Peak/Limit Queue Length 0/1/4096
Total Connections Queued 126
Average Queue Length (1, 5, 15 minutes) 0.00, 0.00, 0.00
Average Queueing Delay 0.02 milliseconds
ListenSocket ls1:
Address http://10.178.132.7:8080
Acceptor Threads 8
Default Virtual Server https-guruweb01
KeepAliveInfo:
KeepAliveCount 2/64
KeepAliveHits 1083
KeepAliveFlushes 0
KeepAliveRefusals 0
KeepAliveTimeouts 11
KeepAliveTimeout 360 seconds
SessionCreationInfo:
Active Sessions 2
Keep-Alive Sessions 1
Total Sessions Created 48/256
CacheInfo:
enabled yes
CacheEntries 110/1024
Hit Ratio 1912/2164 ( 88.35%)
Maximum Age 30
Native pools:
NativePool:
Idle/Peak/Limit 5/6/128
Work Queue Length/Peak/Limit 0/1/0
Server DNS cache disabled
Async DNS disabled
Performance Counters:
Average Total Percent
Total number of requests: 1213
Request processing time: 1.5520 1882.5520
default-bucket (Default bucket)
Number of Requests: 1213 (100.00%)
Number of Invocations: 15085 (100.00%)
Latency: 0.0002 0.2013 ( 0.01%)
Function Processing Time: 1.5518 1882.3507 ( 99.99%)
Total Response Time: 1.5520 1882.5520 (100.00%)
Sessions:
Process Status Function
4280 keep-alive
response service-dump
response service-j2ee
Thanks...

The JSP's are simply Hello World JSP's (however I created these type of JSP's for testing and they do respond slowly as well when these are multiple sessions).
These JSP functioned fine on iPlanet 6.0 SP1 (JDK 1.2.2) without any slow response on Win2K and inferior hardware.

Tomcat 4.1:connection timeout error

Hi. I got a HTML form that allows a user to enter freehand SQL statements and send them to an DB2 database via a SQL Java servlet. After the query executes, it returns an Excel file containing the resultset of my query. Unfortunately, I got a query that when executed, my browser returns "The page could not be found..." due to connection timeout. With another query with different set of criteria, it runs fine-so my Tomcat is running fine. I've executed the same exact query in Excel via JDBC-ODBC bridge Java application and it ran fine and also executed the same query in QMF for Windows, and it ran fine also. So this lends me to believe I need to configure my Tomcat somehow, I presume the connection timeout limit.
Is there a way to remove or increase the connection timeout limit?
Thanks in advance.

Arrrggg!!! That didn't work. Here's the error message:
"The page cannot be displayed There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Click the Refresh <javascript:location.reload()> button, or try again later.
Open the home page, and then look for links to the information you want.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the home page.
10060 - Connection timeout
Internet Security and Acceleration Server
Technical Information (for support personnel)
Background:
The gateway could not receive a timely response from the Web site you are trying to access. This might indicate that the network is congested, or that the Web site is experiencing technical difficulties.
ISA Server: MMPINF17
Via:
Time: 1/27/2003 1:04:11 PM GMT"
Does this mean my company's firewall administrator has set a connection timeout limit? Or is it still my Tomcat's configuration?

OAS 10.1 3.1 0 OC4J JDBC Connection/Timeout settings

I am fairly new to OAS, and am trying to resolve a intermitent issue,
I have an OAS 10.1.3.1.0 with a deployed EAR file I was provided by a supplier containing mainly PL/SQL based logic, which configured the OAS to ask a middle tier for a an external to pass data to it via Stored Procedure and then usiing the deployed package connect to an external Oracle DB and insert the data.
Oas is running on a Windows 2003 platform that has no problems or connectivity problems, how ever intermittenlt the OAS stops uploading data to the external Oracle DB. Some custom external logging details this as a communication at the time it occurs, how ever there are no comms issues. A quick restart of the OAS windows service resolves the issue.
Apart from upgrading OAS to patch set 5, the only other thing I considered could be causing the issue is how OAS is handling the session timeout or connection pool.
I can see the following settings for the JDBC connection I am using, I wondered if anyone could advise anything that could be changed? I am not sure the implications on setting the validate connection to True and also not sure why maximum number of connections is set to -1?
Connections
Initial size of Connection Cache
Minimum Number of Connections
Maximum Number of Connections
Connection Retry Interval (seconds)
Maximum Connection Attempts
Maximum Number of Statements Cached
Lower Threshold Limit On Pool (%)
Defaults to 20% of max connections.
Validate Connection FalseTrue
Timeouts
Inactivity Timeout (seconds)
Time that an unused connection is inactive before it is removed from the pool.
Wait For Used Connection Timeout (seconds)
Maximum time to wait for a used connection to be released.
Max Active Time for a Used Connection (seconds)
Maximum time a used connection may be active.
Abandoned Connection Timeout (seconds)
Enforce Timeout Limits Interval (seconds)
Any help would be appreciated

Hi,
Along with Priya's suggestions, please refer the link below for the details on the parameters.
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28958/datasrc.htm#CHDCFCHB
Hope this will help understand all the parameters.
Also refer,
What Should Be My Maximum Connection Pool Size? [ID 1061155.1]
http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.html
Regards,
Mithun

TCP Connect Timeout

Does anyone know of a way to increase the TCP connection timeout on Linux (RedHat ES 3.0, 2.4.21-9.0.3.ELsmp). We currently always keep a "dead" server in our imqAddressList for failover. The server has nothing listening on the portmapper port, 7676. When I telnet over regular Internet it takes less than a second to get a connection refused response:
telnet: Unable to connect to remote host: Connection refusedWhen I telnet to this server over a low bandwidth satellite connection, I get a timeout after 3 minutes:
[root@client# time telnet server 7676
Trying X.X.X.X...
telnet: connect to address X.X.X.X: Connection timed out
real    3m15.393s
user    0m0.010s
sys     0m0.000sWe currently have 3 servers in our imqAddressList and imqReconnectAttempts is set to 0. However, since one of the 3 servers is dead, 1/3 of the time it takes over 3 minutes to get a connection. I'd imagine that the socket connection from IMQ is exhibiting the same behavior as telnet.
Is there anywhere that I can tweak this timeout?
Thanks,
Aaron

You need to call connect on a socket set to non-blocking mode with fcntl, and then use select with a timeout to limit the amount of time you will wait for the connect to complete. If select returns because you timed out, then close the socket and return an error. If select returns because of an event on the socket, you use getsockopt to determine if the connect succeeded or not.
See Stevens, Unix Network Programming Vol 1 for details. Comments in the code I'm looking at say page 411.
Hope this helps.

Slow response times

This last weekend, we migrated off of our old server 2003 cf7mx server, to a new Server 2008r2 x64 CF 9,0,1,274733 server. We are now experiencing slow response times for our server,according to the Windows Performance monitor our Avg Request times are way up. I have been going through some logs but nothing seems to leap out at me, but i am not the best CF admin. As i dont know what information would be usefull, i have tried to give all the info.
Here is our coldfusion-event log:
08/14 16:22:58 user JSPServlet: init
08/14 16:23:00 user ColdFusionStartUpServlet: init
08/14 16:23:00 user ColdFusionStartUpServlet: ColdFusion: Starting application services
08/14 16:23:00 user ColdFusionStartUpServlet: ColdFusion: VM version = 14.3-b01
08/14 16:23:08 user ColdFusionStartUpServlet: ColdFusion: application services are now available
08/14 16:23:08 user CFMxmlServlet: init
08/14 16:23:08 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
08/14 16:23:10 user CFSwfServlet: init
08/14 16:23:10 user CFCServlet: init
08/14 16:23:12 user FlashGateway: init
08/14 16:23:12 user MessageBrokerServlet: init
08/14 16:23:13 user CFFormGateway: init
08/14 16:23:13 user CFInternalServlet: init
08/14 16:23:13 user WSRPProducer: init
08/14 16:23:13 user ServerCFCServlet: init
08/15 08:13:09 user GraphServlet: init
08/15 10:25:45 user CFInternalServlet: destroy
08/15 10:25:50 user FlashGateway: destroy
08/15 10:25:50 user WSRPProducer: destroy
08/15 10:25:50 user CFCServlet: destroy
08/15 10:25:50 user GraphServlet: destroy
08/15 10:25:50 user CFMxmlServlet: destroy
08/15 10:25:50 user CFFormGateway: destroy
08/15 10:25:50 user CFSwfServlet: destroy
08/15 10:26:50 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
08/15 10:26:50 info JRun Proxy Server listening on *:51800
08/15 10:26:50 info Deploying enterprise application "Adobe_ColdFusion_9" from: file:/C:/ColdFusion9/
08/15 10:26:51 info Deploying web application "Adobe ColdFusion 9" from: file:/C:/ColdFusion9/
08/15 10:26:52 user JSPServlet: init
08/15 10:26:53 user ColdFusionStartUpServlet: init
08/15 10:26:53 user ColdFusionStartUpServlet: ColdFusion: Starting application services
08/15 10:26:53 user ColdFusionStartUpServlet: ColdFusion: VM version = 14.3-b01
08/15 10:26:58 user ColdFusionStartUpServlet: ColdFusion: application services are now available
08/15 10:26:58 user CFMxmlServlet: init
08/15 10:26:58 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
08/15 10:26:59 user CFSwfServlet: init
08/15 10:27:00 user CFCServlet: init
08/15 10:27:03 user FlashGateway: init
08/15 10:27:03 user MessageBrokerServlet: init
08/15 10:27:04 user CFFormGateway: init
08/15 10:27:04 user CFInternalServlet: init
08/15 10:27:04 user WSRPProducer: init
08/15 10:27:05 user ServerCFCServlet: init
08/15 10:36:30 user CFInternalServlet: destroy
08/15 10:36:36 user FlashGateway: destroy
08/15 10:36:36 user WSRPProducer: destroy
08/15 10:36:36 user CFCServlet: destroy
08/15 10:36:36 user CFMxmlServlet: destroy
08/15 10:36:36 user CFFormGateway: destroy
08/15 10:36:36 user CFSwfServlet: destroy
08/15 10:38:35 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
08/15 10:38:35 info JRun Proxy Server listening on *:51800
08/15 10:38:35 info Deploying enterprise application "Adobe_ColdFusion_9" from: file:/C:/ColdFusion9/
08/15 10:38:35 info Deploying web application "Adobe ColdFusion 9" from: file:/C:/ColdFusion9/
08/15 10:38:36 user JSPServlet: init
08/15 10:38:37 user ColdFusionStartUpServlet: init
08/15 10:38:37 user ColdFusionStartUpServlet: ColdFusion: Starting application services
08/15 10:38:37 user ColdFusionStartUpServlet: ColdFusion: VM version = 14.3-b01
08/15 10:38:41 user ColdFusionStartUpServlet: ColdFusion: application services are now available
08/15 10:38:41 user CFMxmlServlet: init
08/15 10:38:41 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
08/15 10:38:44 user CFSwfServlet: init
08/15 10:38:44 user CFCServlet: init
08/15 10:38:46 user FlashGateway: init
08/15 10:38:46 user MessageBrokerServlet: init
08/15 10:38:47 user CFFormGateway: init
08/15 10:38:47 user CFInternalServlet: init
08/15 10:38:47 user WSRPProducer: init
Here is our cf application log:
"Severity","ThreadID","Date","Time","Application","Message"
"Information","jrpp-0","06/25/11","19:24:19",,"C:\ColdFusion9\logs\application.log initialized"
"Error","jrpp-0","06/25/11","19:24:19",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-1","06/25/11","22:14:06",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-2","06/25/11","22:32:05",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Information","jrpp-3","06/26/11","11:45:13","CFADMIN","Invalid login for Default User"
"Error","jrpp-0","07/06/11","15:46:07",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-1","08/14/11","20:56:25","impager","Element DEPT is undefined in FORM. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinical\pagers\impager\sendpage.cfm, line: 1 "
"Error","jrpp-1","08/14/11","21:04:33",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-4","08/14/11","22:04:43","impager","Element DEPT is undefined in FORM. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinical\pagers\impager\sendpage.cfm, line: 1 "
"Error","jrpp-36","08/15/11","08:50:29","TEAMS_database","Variable MYPERIOD is undefined. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthly_entry.cfm, line: 220 "
"Error","jrpp-50","08/15/11","09:12:36",,"Invalid CFML construct found on line 2 at column 25.ColdFusion was looking at the following text:=The CFML compiler was processing:<ul><li>An expression that began on line 2, column 8. The expression might be missing an ending #, for example, #expr instead of #expr#.<li>A cfset tag beginning on line 2, column 2.</ul> The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinpub\L2\ess\page3e.cfm, line: 2 "
"Error","jrpp-50","08/15/11","09:13:39",,"Invalid CFML construct found on line 2 at column 25.ColdFusion was looking at the following text:=The CFML compiler was processing:<ul><li>An expression that began on line 2, column 8. The expression might be missing an ending #, for example, #expr instead of #expr#.<li>A cfset tag beginning on line 2, column 2.</ul> The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinpub\L2\ess\page3e.cfm, line: 2 "
"Error","jrpp-50","08/15/11","09:14:17",,"Invalid CFML construct found on line 42 at column 35.ColdFusion was looking at the following text:=The CFML compiler was processing:<ul><li>An expression that began on line 42, column 8. The expression might be missing an ending #, for example, #expr instead of #expr#.<li>A cfset tag beginning on line 42, column 2.</ul> The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinpub\L2\ess\page4a.cfm, line: 42 "
"Error","jrpp-78","08/15/11","09:56:53","TEAMS_database","Variable MYPERIOD is undefined. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthly_entry.cfm, line: 220 "
"Error","jrpp-75","08/15/11","10:10:12","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-80","08/15/11","10:10:46","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-78","08/15/11","10:11:28","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 124 "
"Error","jrpp-89","08/15/11","10:13:20","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 418 "
"Error","jrpp-88","08/15/11","10:13:52","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\login.cfm, line: 77 "
"Error","jrpp-82","08/15/11","10:14:35","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-92","08/15/11","10:16:25","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\login.cfm, line: 77 "
"Error","jrpp-84","08/15/11","10:18:11","impager","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinical\pagers\impager\pagerlist.cfm, line: 620 "
"Error","jrpp-89","08/15/11","10:19:37","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_1.cfm, line: 233 "
"Error","jrpp-80","08/15/11","10:22:19","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_1.cfm, line: 154 "
"Error","jrpp-92","08/15/11","10:23:24","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\login.cfm, line: 84 "
"Error","jrpp-96","08/15/11","10:24:12","TEAMS_database","The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_2.cfm, line: 157 "
"Error","jrpp-95","08/15/11","10:24:12","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_1.cfm, line: 233 "
"Error","jrpp-14","08/15/11","10:31:03","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-2","08/15/11","10:31:33","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\sow.cfm, line: 144 "
"Error","jrpp-15","08/15/11","10:32:04","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\TA_entry.cfm, line: 154 "
"Error","jrpp-1","08/15/11","10:32:15","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 124 "
"Error","jrpp-12","08/15/11","10:32:58","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\sow.cfm, line: 169 "
"Error","jrpp-10","08/15/11","10:33:21","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 418 "
"Error","jrpp-4","08/15/11","10:33:43","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_2.cfm, line: 233 "
Please let me know if any other data would be usefull.

Hi,
I expect the error details in CF9\runtime\logs\coldfusion-out.log will like provide a clue as to problem.
For a more long term plan I think you should do what you can to migrate the ACCESS data to SQL or some other database.
HTH, Carl.

Troubleshooting slow response to email via vpn

I've just adopted a vpn 3000 concentrator, and am totally learing this, so my apologies.
What could be reasons within a VPN enviroment that people are having slow response to email. (excluding issues with servers)
From a network perspective I can trouble shoot slow response, but how would a vpn enviroment be any more different to troubleshoot.
Naturally VPN is going to be much much slower, but taking 10 minutes for multiple users to get their email seems odd. LAN users get there email within seconds

Hi:
I'll tell you, I used to have the exact same problem at my last company.
We had an Exchange server for email and everyone used Cisco's VPN client.
Email was so slow, it was ridiculous sometimes. Everything else was OK, though. Other applications were OK, and network management was also good. It was just Exchange.
I know that Exchange is notorious for being delay intolerant, but this was bad! and it seemed to get worse with time.
Anyway, I dont know if you have done any troubleshooting yet or not, but you would definitely want to focus on the MTU settings for the VPN connection. Remember that IPSec adds overhead that may cause the ethernet frame to exceed the network's allowable MTU, so the packets get fragmented and reassembled at the receiving end. This can be a very slow process. And some applications are not very tolerant of fragmentation, like SQL and, I think, Exchange, too.
The problem with client VPN is that you would have to adjust each user's PC MTU. With site-to-site VPN, you can, of course, set the maximum segment size of the entire tunnel, so all users sitting behind the tunnel will be forced to conform to the tunnel's stips.
But you can try doing that on a few PCs to see if anything changes. I changed the PCs MTU using freeware called DR. TCP/IP. You can download it for free and it will allow you to change the PCs MTU very easily -- just a few keystrokes, instead of having to go into the registry and get stupid with Windows.
Change the output segment size for the PC to, say, 1400, and see if that improves anything. You would also want to change it on the 3000. I forgot how to do it on the 3000.
Victor

ISA 2006 slow response, connections timeout, maximum limit reached?

Similar Messages

Maybe you are looking for