ISA 550 Error - sdsd: http_get: Error: http_read_response failed, returned -2

Hi all,
I have a problems with my installed Cisco ISA 550 firewall
I received below error under the log messages.
     Could you be able to explain what is the reason for this message ?

Hi Bikram,
HW and SW informations are below, and i have attached  two captures of two types (error, information) of logs messages what I  received.
Firmware (Primary/Secondary)     : 1.2.17/1.0.3
Bootloader Version                         : 0.0.20 (dual)
PID VID                                           : ISA550-K9 V01
Plz reply me if you want any further details.
Thanks,
Charith

Similar Messages

  • MDT 2013 - Litetouch deployment failed, Return Code = -2147467259 0x80004005

    I'm attempting to deploy an image that I have recently captured with MDT.  I was able to capture the image without any problems and after capturing, it booted up properly.  But now when I go to deploy the image using a Standard Task Sequence it
    errors out.  It does boot into WinPE and gets to the installing operating system portion then spits out the following 8 errors:
    (5624):2: Run ImageX: /apply "\\PDC31089\DeploymentShare$\Operating Systems\Win7_BUP_1-31-14\Win7_BUP_1-31-14.wim" 1 C:
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Install Operating System.
    Unknown error (Error: 000015F8; Source: Unknown)
    The execution of the group (Install) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Install Operating System. Execution of task sequence failed.
    Unknown error (Error: 000015F8; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005After I receive the error messages if I attempt to restart the computer and allow it to boot up it just comes up with:"An operating system wasn't found. Try disconnecting any drives that don't contain an operating system"
    I have tried the following to resolve this issue:
    Create a new deployment share with only network drivers added and the one .WIM that was captured with MDT as well as one Task sequence.
    Update to MDT 2013
    Update Deployment share and completely regenerate Boot images
    Tried starting deployment from within Windows by mapping the drive and executing litetouch.vbs
    Also tried starting deployment using USB boot disk
    I'm running out of ideas and seem to keep getting the same 8 error messages.  It's very aggravating and am hoping that someone can point me in the right direction.
    I've included some log files on Skydrive at:  https://skydrive.live.com/redir?resid=6375A8F9E8089918%21105

    I came across this post recently. I am having the same string of errors suddenly when I try to deploy any image from my MDT 2013 server now. Previous images now fail to install soon after the Inject Drivers task sequence at the Install Operating System sequence.
    Each time I try to deploy an image(have tried several each with different task sequences), I get the same 7 errors.
    The errors produced are:
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Install Operating System.
    Incorrect Function (Error: 00000001; Source: Windows)
    The execution of the group (Install) has failed and the execution has been
    aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Install Operating System. Execution of task
    sequence failed.
    Incorrect Function
    (Error: 00000001;
    Source: Windows)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005
    My HD size is 146GB with about 71GB being free.
    The BDD.log file is too large to post here apparently. Here are the
    last bits of it.
    <![LOG[Assume this disk is the destination Disk, and verify.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
    context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[TargetPartitionIdentifier is set, find disk: SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
    component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Search for Drive: TargetPartitionIdentifier  SELECT * FROM Win32_LogicalDisk WHERE Size = '499577253888' and VolumeName = 'OSDisk' and VolumeSerialNumber = 'CA3BC8A9']LOG]!><time="11:36:58.000+000" date="09-26-2014"
    component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Found Drive: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Property OSDTargetDriveCache is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Property OSDisk is now = C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Target Drive Letter Found: C:]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Found OS Drive: C   0]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[New ZTIDiskPartition : \\MININT-I3DUVLI\root\cimv2:Win32_LogicalDisk.DeviceID="C:"    \\MININT-I3DUVLI\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="11:36:58.000+000"
    date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Check Disk [0] <> [0] OK to skip.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[####### NOTE:  If this is one of the  last lines in your BDD.log file, check C: for the most up to date bdd.log!!!]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart"
    context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread="" file="ZTIDiskpart">
    <![LOG[Event 41001 sent: ZTIDiskpart processing completed successfully.]LOG]!><time="11:36:58.000+000" date="09-26-2014" component="ZTIDiskpart" context="" type="1" thread=""
    file="ZTIDiskpart">

  • Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility bu

    Installing a trial version of the Illustrator and InDesign App in Creative Cloud on my Mac is impossible. Keep getting 'Installation failed' notices. More information gives 0 fatal error(s), 0 error(s). Already repaired disk permissions in Disk Utility but nothing seems to work. Exit code: 7.

    Hi Maarton,
    Please follow the link to resolve the issue: Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
    -Ankit

  • IM GETTING A MESSAGE ITUNES WAS NOT INSTALLED CORRECTLY. PLEASE REINSTALL. ERROR 7 (WINDOWS ERROR 1114) I TRYED TO REINSTALL IN APPLE SUPPORT BUT I GET TANOTHER MESSAGE. SERVICE APPLE MOBILE DEVICE FAILED TO START. VERIFY THATSUFFICIENT PRIVILEDGES TO STA

    I'm getting a n error message when I try to open Itunes. Itunes was not install correctly. Please reinstall itunes. Error 7 (Windows error 1114) This happened after I unsuccesfully tried to install an update. I have had itunes on this computer for three years. When I try to reinstall the latest version I get another message.Service Apple Mobile Device (Apple mobile Device) failed to start. verify that you have sufficient privileges to start system services. Abort, Retry, Ignore Does anyone know how to solve this problem?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services. and 'iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)

    Hi!
    So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same  "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
    Tings I have done:
    - Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
    - Attached iPod before iTunes install and updated drivers.
    - Installed iTunes as 'Run as administrator'
    - Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
    Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
    tt2

  • I get error message: "An error occurred with the  publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

    I get error message: "An error occurred with the  publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start".  After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing".  I downloaded MSVCR80.dll.

    When I open iTunes I get an error message "MSVCR80.DLL missing".  I downloaded this .dll and installed in C:\Windows|System32.  I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • FSL-06002  Error 14001 This application has failed to start

    Hello Folks
    I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
    The installation is under Windows 2003 server SP2 and Oracle 920
    I'm in the Database Instance Installation (non-unicode) and phase 29 (Updating database statistics) 
    The following error is:
    TRACE      [synxccuren.cpp:452]
               grantAccessTo
    Granted access rights 0xf01ff for object default to user chavez-server\mauadm with inheritance flags 0.
    TRACE<i>   [synxccuren.cpp:1045]
               CSyCurrentProcessEnvironmentImpl::setUser()
    Switched to user: mauadm.
    ERROR 2009-08-23 13:27:58
    FSL-06002  Error 14001 (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
    ) in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\MAU\SYS\exe\run/brconnect ...).
    When i ran the brconnect manually i received the same error  (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem)
    When i ran brconnect using cmd.exe i received the following error
    E:\usr\sap\MAU\SYS\exe\run>brconnect.exe
    The system cannot execute the specified program.
    I think is important mention this, i had problem 1 setp before about the brtools 7.00
    Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output:
    BR0801I BRCONNECT 7.00 (16)
    BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
    BR0310E Connect to database instance MAU failed
    BR0280I BRCONNECT time stamp: 2009-08-23 13.06.43
    BR0804I BRCONNECT terminated with errors
    I downloaded the correct version (640) DBATOOLS Package for Oracle 9.2 and i replaced the files
    Please folks someone have any idea about this, i tried search on the web and nothing, on the marketplace and nothing
    Thanks all for your help

    >
    Markus Doehr wrote:
    > > I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
    > > The installation is under Windows 2003 server SP2 and Oracle 920
    >
    > and something on top: 640_EX2 is only for Oracle 10g - it  won't work with Oracle 9.2. So you should change your kernel to 640 back - then the R3DLLINS works.
    >
    >
    >
    >
    > Markus
    Ok Markus, i did the following
    First i downloaded vcredist_<platform>.exe from Microsoft web page and retry the installation
    And the following error i got
    Operative System open's a Window that say following
    brconnect.exe Unable to locate component "this application has failed to start because orasql10.dll was not found. Re-installing the application may fix this problem"
    And this is the log
    WARNING 2009-08-23 17:52:07
    Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 128. Output:
    ERROR 2009-08-23 17:52:07
    CJS-00288  Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 128.<br>SOLUTION: See brconnect.log for details.
    Second i downloaded the kernel 640 whitout ext2 and i get the following error
    INFO 2009-08-23 17:41:32
    Output of E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU is written to the logfile brconnect.log.
    WARNING 2009-08-23 17:41:32
    Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output: BR0801I BRCONNECT 6.40 (51)BR0252E Function _popen() failed for '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' at location BrPipeOpen-4BR0253E errno 2: No such file or directoryBR0272E Execution of program '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' through pipe failedBR0303E Determination of Oracle version failed
    ERROR 2009-08-23 17:41:32
    CJS-00288  Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 3.<br>SOLUTION: See brconnect.log for details.

  • Updating iTunes with error message "this application has failed to start because MSVCR80.dll was not found"?

    After updating iTunes, has anyone got the message "this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." message and "iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 126)"?  I've tried everything from un-installing and re-installing iTunes to deleting the SC Info. Any help would be greatly appreciated

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99840)

  • I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found."  I have uninstalled and reinstalled iTunes multiple times.  Am running Windows XP Svc Pack 3.  help

    I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found.  Reinstalling the application may fix this problem."  I have uninstalled and reinstalled iTunes several times with no success.  I am running Windows XP Svc Pack 3.  Help please.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99753)

  • Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

    Hi All,
    I am using project server 2007 and WSS 3.0. 
    I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
    Everything is correct whether it is URL or MS Project profile account on MSP.  This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
    When i try to connect to MSP on App server, i get the following errors in event viewer.
    Event Type: Error
    Event Source: MSSOAP
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description:
    Soap error: Connection time out..
    Event Type: Error
    Event Source: MSSOAP
    Event Category: Client 
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description:
    Soap error: An unanticipated error occurred during the processing of this request..
    Event Type: Error
    Event Source: MSSOAP
    Event Category: Client 
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description: Soap error: Sending the Soap message failed or no recognizable response was received.
    Event Type: Error
    Event Source: MSSOAP
    Event Category: Client 
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description:
    Soap error: Unspecified client error..
    One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
    sandeep

    Hi Paul ,
    Thanks for reply. The project server URL was already added to the Trusted
    Sites/Local Intranet areas in IE. 
    sandeep

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

    i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Excel 2007 = Refresh All = Error Message "Initialization Data Source Failed"

    Excel 2007 => Data Tab - Refresh All => Error Message "Initialization Data Source Failed
    2nd Error message:
    The following data ranged failed to refresh:  ExternalData1 - Continue to refresh all
    How do I resolve this? Trying to connect to Oracle DB environment 12C

    What will happen if you rebuild the PivotTable/Table ?
    Make sure the external database is available and the Oracle Provider for OLE DB is installed correctly.
    Wind Zhang
    TechNet Community Support

  • After the update to Android 5.0.1 my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002)

    After the update to Android 5.0.1 on my Galaxy Note 4, my Galaxy Gear S will not install apps, I get an error message that says "Installation Failed. Try Later. (WO:WO:-1002). I am glad it was a free app I was trying to install (I tried a couple of different ones to see if it was just a bad app and they all failed on the install. The Note 4 and the Gear S seem to be communicating okay via bluetooth (health stuff syncs, Gear S controls the music player on the note 4 Etc. )

    Everything that I had installed previously on the gear S still works.
    Everthing while in the gear manager seems to be working okay also. I can make changes in the Gear manager on the note 4 and they show up on the gear S. I have an app called watch styler , it let me create a new watch on the Note 4 and that showed up on the Gear S.
    The only thing that seems to be not working is installing new apps.
    When trying to get a new app it looks like it is working as normal , the dowload shows it is working but it errors out when it goes to install it.
    REPLY SEPARATOR ***********

Maybe you are looking for