ISA 550W : Youtube streaming stops after few seconds

Since I have installed the ISA 550W, the Youtube videos stops after few seconds. It happens on all my devices : Windows 8, Samsung Smart TV, Android, Windows Phone...
I have the lates firmware.
This problem does not occur with other streaming site like DailyMotion.
I diabled HTTP on antivirus but it has not changed anything. The web browsing is faster.
Application control is not enabled.
Any idea ? Thanks in advance.

Hi,
i have do more test on this problem today and after disable all services and enable one by one i arrive on result is the Anti Virus block or disturbe the good process on download file for you tube or for another system.
My configuration is :
Product : ISA 550W
Firmware : 1.2.17
ISP : free with maximum 1Mo download with test linux image file from here :
http://www.ubuntu-fr.org/telechargement?action=dl
I hope this can be help cisco to find quickly solution because this solution can be temporary.
I no buy option "security services" to have this service disable.
thanks
The 09/10/2013 : you can enable anti-virus and disable HTTP scan and youtube work and download work fine.

Similar Messages

I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it?

I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??

Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
If it's still stopping after that...Do the tried and tested method for everything: reset your router.

Dispatcher stop after few second

Dear friend, I have restore database using BRRESTORE. My dispatcher is stopped after few second. Developer trace is as below.:
Pls. give me solution as soon as possible.. Thanks. in advance.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jun 13 08:38:11 2011
kernel runs with dp version 136(ext=102) (@(#) DPLIB-INT-VERSION-136)
length of sys_adm_ext is 312 bytes
sysno      00
sid        PRD
systemid   560 (PC with Windows NT)
relno      6400
patchlevel 0
patchno    218
intno      20020600
make:      multithreaded, ASCII
pid        6128
***LOG Q00=> DpSapEnvInit, DPStart (00 6128) [dpxxdisp.c   1104]
     shared lib "dw_xml.dll" version 218 successfully loaded
     shared lib "dw_xtc.dll" version 218 successfully loaded
     shared lib "dw_stl.dll" version 218 successfully loaded
     shared lib "dw_gui.dll" version 218 successfully loaded
     shared lib "dw_mdm.dll" version 218 successfully loaded
Mon Jun 13 08:38:23 2011
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0234.qqq.nxst) took 12 seconds
Mon Jun 13 08:38:40 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3881]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >abcbl_PRD_00                            <
DpShMCreate: sizeof(wp_adm)          16640     (832)
DpShMCreate: sizeof(tm_adm)          2379840     (11840)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          192000     (384)
DpShMCreate: sizeof(vmc_adm)          0     (364)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 051B0040, size: 2675472)
DpShMCreate: allocated sys_adm at 051B0040
DpShMCreate: allocated wp_adm at 051B17D8
DpShMCreate: allocated tm_adm_list at 051B58D8
DpShMCreate: allocated tm_adm at 051B5900
DpShMCreate: allocated wp_ca_adm at 053FA940
DpShMCreate: allocated appc_ca_adm at 053FEF90
DpShMCreate: allocated comm_adm_list at 05400700
DpShMCreate: allocated comm_adm at 05400718
DpShMCreate: allocated vmc_adm_list at 0542F518
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0542F540
DpShMCreate: allocated wall_adm at 0542F548
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2457 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( abcbl) [dpxxdisp.c   10127]
DpStartStopMsg: send start message (myname is >abcbl_PRD_00                            <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 218
Release check o.K.
Mon Jun 13 08:39:20 2011
ERROR => W0 (pid 6032) died [dpxxdisp.c   12698]
ERROR => W1 (pid 6132) died [dpxxdisp.c   12698]
ERROR => W2 (pid 564) died [dpxxdisp.c   12698]
ERROR => W3 (pid 196) died [dpxxdisp.c   12698]
ERROR => W4 (pid 4512) died [dpxxdisp.c   12698]
ERROR => W5 (pid 4600) died [dpxxdisp.c   12698]
ERROR => W6 (pid 6064) died [dpxxdisp.c   12698]
ERROR => W7 (pid 4552) died [dpxxdisp.c   12698]
ERROR => W8 (pid 4520) died [dpxxdisp.c   12698]
ERROR => W9 (pid 6060) died [dpxxdisp.c   12698]
ERROR => W10 (pid 4528) died [dpxxdisp.c   12698]
ERROR => W11 (pid 4376) died [dpxxdisp.c   12698]
ERROR => W12 (pid 4560) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W13 (pid 4484) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W14 (pid 4488) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W15 (pid 1700) died [dpxxdisp.c   12698]
ERROR => W16 (pid 4380) died [dpxxdisp.c   12698]
ERROR => W17 (pid 4464) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W18 (pid 5932) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W19 (pid 4620) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-6032 (SIGUSR2)
ERROR => DpWpKill(6032, SIGUSR2) failed [dpxxtool.c   2508]
killing W1-6132 (SIGUSR2)
ERROR => DpWpKill(6132, SIGUSR2) failed [dpxxtool.c   2508]
killing W2-564 (SIGUSR2)
ERROR => DpWpKill(564, SIGUSR2) failed [dpxxtool.c   2508]
killing W3-196 (SIGUSR2)
ERROR => DpWpKill(196, SIGUSR2) failed [dpxxtool.c   2508]
killing W4-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c   2508]
killing W5-4600 (SIGUSR2)
ERROR => DpWpKill(4600, SIGUSR2) failed [dpxxtool.c   2508]
killing W6-6064 (SIGUSR2)
ERROR => DpWpKill(6064, SIGUSR2) failed [dpxxtool.c   2508]
killing W7-4552 (SIGUSR2)
ERROR => DpWpKill(4552, SIGUSR2) failed [dpxxtool.c   2508]
killing W8-4520 (SIGUSR2)
ERROR => DpWpKill(4520, SIGUSR2) failed [dpxxtool.c   2508]
killing W9-6060 (SIGUSR2)
ERROR => DpWpKill(6060, SIGUSR2) failed [dpxxtool.c   2508]
killing W10-4528 (SIGUSR2)
ERROR => DpWpKill(4528, SIGUSR2) failed [dpxxtool.c   2508]
killing W11-4376 (SIGUSR2)
ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c   2508]
killing W12-4560 (SIGUSR2)
ERROR => DpWpKill(4560, SIGUSR2) failed [dpxxtool.c   2508]
killing W13-4484 (SIGUSR2)
ERROR => DpWpKill(4484, SIGUSR2) failed [dpxxtool.c   2508]
killing W14-4488 (SIGUSR2)
ERROR => DpWpKill(4488, SIGUSR2) failed [dpxxtool.c   2508]
killing W15-1700 (SIGUSR2)
ERROR => DpWpKill(1700, SIGUSR2) failed [dpxxtool.c   2508]
killing W16-4380 (SIGUSR2)
ERROR => DpWpKill(4380, SIGUSR2) failed [dpxxtool.c   2508]
killing W17-4464 (SIGUSR2)
ERROR => DpWpKill(4464, SIGUSR2) failed [dpxxtool.c   2508]
killing W18-5932 (SIGUSR2)
ERROR => DpWpKill(5932, SIGUSR2) failed [dpxxtool.c   2508]
killing W19-4620 (SIGUSR2)
ERROR => DpWpKill(4620, SIGUSR2) failed [dpxxtool.c   2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 13 08:39:30 2011
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)               Mon Jun 13 12:39:30 2011
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA     6032 Ended         no      1   0             0
1 DIA     6132 Ended         no      1   0             0
2 DIA      564 Ended         no      1   0             0
3 DIA      196 Ended         no      1   0             0
4 DIA     4512 Ended         no      1   0             0
5 DIA     4600 Ended         no      1   0             0
6 DIA     6064 Ended         no      1   0             0
7 DIA     4552 Ended         no      1   0             0
8 DIA     4520 Ended         no      1   0             0
9 DIA     6060 Ended         no      1   0             0
10 DIA     4528 Ended         no      1   0             0
11 DIA     4376 Ended         no      1   0             0
12 DIA     4560 Ended         no      1   0             0
13 UPD     4484 Ended         no      1   0             0
14 ENQ     4488 Ended         no      1   0             0
15 BTC     1700 Ended         no      1   0             0
16 BTC     4380 Ended         no      1   0             0
17 BTC     4464 Ended         no      1   0             0
18 SPO     5932 Ended         no      1   0             0
19 UP2     4620 Ended         no      1   0             0
Dispatcher Queue Statistics               Mon Jun 13 12:39:30 2011
===========================

THanks for reply pls find dev_wo file.
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Mon Jun 13 11:05:11 2011
B create_con (con_name=R/3)
B Loading DB library 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' ...
B Library 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'K:\usr\sap\PRD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.199)
B New connection 0 created
M sysno      00
M sid        PRD
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    218
M intno      20020600
M make:      multithreaded, ASCII
M pid        3776
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3776) [dpxxdisp.c   1164]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          16640     (832)
M DpShMCreate: sizeof(tm_adm)          2379840     (11840)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpShMCreate: sizeof(comm_adm)          192000     (384)
M DpShMCreate: sizeof(vmc_adm)          0     (364)
M DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 051B0040, size: 2675472)
M DpShMCreate: allocated sys_adm at 051B0040
M DpShMCreate: allocated wp_adm at 051B17D8
M DpShMCreate: allocated tm_adm_list at 051B58D8
M DpShMCreate: allocated tm_adm at 051B5900
M DpShMCreate: allocated wp_ca_adm at 053FA940
M DpShMCreate: allocated appc_ca_adm at 053FEF90
M DpShMCreate: allocated comm_adm_list at 05400700
M DpShMCreate: allocated comm_adm at 05400718
M DpShMCreate: allocated vmc_adm_list at 0542F518
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0542F540
M DpShMCreate: allocated wall_adm at 0542F548
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Mon Jun 13 11:05:12 2011
M calling db_connect ...
C Prepending E:\oracle\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPRD's password
C Connecting as /@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   0463A5C8   0463F654   0463F0F8
C Attaching to DB Server PRD (con_hdl=0,svchp=0463F04C,srvhp=0463FC24)
C Starting user session (con_hdl=0,svchp=0463F04C,srvhp=0463FC24,usrhp=04648404)
C Now '/@PRD' is connected (con_hdl 0, nls_hdl 0).
C *** ERROR => ORA-980 when accessing table SAPUSER
[dbsloci.c    11772]
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0463F04C,usrhp=04648404)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPPRD/<pwd>@PRD on connection 0 (nls_hdl 0) ... (dbsl 640 250407)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   0463A5C8   0463F654   0463F0F8
C Starting user session (con_hdl=0,svchp=0463F04C,srvhp=0463FC24,usrhp=04648404)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
[dboci.c      4508]
C *** ERROR => CONNECT failed with sql error '1017'
[dbsloci.c    11404]
B ***LOG BY2=> sql error 1017   performing CON [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 1017   performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1282]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9696]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server abcbl_PRD_00 on host abcbl (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Mon Jun 13 11:05:12 2011
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9881
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3776) [dpnttool.c   357]

Audio CD stops after few seconds

Hello,
I use ITunes 9 under windows 7.
I can't read (and convert to MP3) an audio CD using ITunes.
The song starts ans stops after 2 seconds.
Same effect in windows Media player but it works OK in Winamp.
The diagnostic says everything's ok
"** Tests du lecteur CD/DVD **
Aucun pilote dans LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: PIONEER DVD-RW DVR-K04RA, Rev 1.00
CD audio dans le lecteur.
9 morceaux trouvés sur le CD, durée de lecture 41:36 sur CD audio.
Piste 1, début 00:02:32
Piste 2, début 01:01:12
Piste 3, début 06:56:07
Piste 4, début 11:46:10
Piste 5, début 16:55:37
Piste 6, début 20:49:25
Piste 7, début 25:58:45
Piste 8, début 32:43:47
Piste 9, début 37:17:15
La lecture du CD Audio a réussi (vérifiez la présence de microprogramme ancien).
Vitesse du lecteur obtenue.
Les vitesses CDR du lecteur sont : 4 10 16 20 24.
Les vitesses CDRW du lecteur sont : 4.
Les vitesses DVDR du lecteur sont : 4.
Les vitesses DVDRW du lecteur sont : 4."
Many thanks to help me

Yes, they are all commercial CD's.
I tested with 10 commercial CD's.
The song starts and stops after 1 or 2 seconds and ITunes switchs to the next track ...
Same effect with Media Player.
Media player says there is an error (red cross !) but there is no error message ....
All works fine with winamp .....

My media apps stops after few seconds of playing, Youtube, Ipod, Wunder Radio, etc..

in trying to use ipod and youtube apps on my iphone 4 on IOS 4.3.3 and after a few seconds they stop playing, can't play the songs or videos or wunder radio over 5 seconds, last time i reseted to factory, then i realized there's something wrong with the config, i wanna know what is it .

Hi i have exactly the same prob as yours. Seems like this is rather recent. Just asking, did you jailbreak ur phone?

Import from camcorder stops after few seconds. Never used to! Ideas?

Hi you wonderful experts and enthusiast out there.
Been using iMovie HD 5 successfully for a couple of years, but all of a sudden I can't import from my camcorder. I have a long, unbroken, recorded sequence on the camcorder, but when I go to import iMovie imports just a few seconds before stopping. And if I hit import again it does the same, but the "bits" don't match exactly so I cant even splice them together. Which leaves my with no idea how to proceed.
I did wonder if the movie was already too full (unlikely, but the same happened on a brand new movie) and also whether the DV tape was just too old (but the same is happening with a brand new tape).
It's a Canon MV960, if that helps.
ANd if I can't use iMovie to import it - is there another way? (Like I can use image capture in place of iPhoto if I so desire.)
Message was edited by: Trevor C

Hi
My list of what to try:
Test another FW-Cable.
The GarasgeBand trick. Start GB save a fake project close it. Now try iMovie again.
Test Your Camera on another Mac so that DV-in still works OK
Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
Free space on internal (start-up) hard disk ? (Others don't count)
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W

Videos stop after few seconds then continue

My system is W7 Home Premium 32 bit and IE 8
Just recently I find that when I try to play a video clip (generally BBC News
but also others) the rotating circle of dots displays whilst the video is loading
but it then plays (sound and vision) for only a few seconds then stops for about
10 seconds and then resumes playing right through to the end. If I click on
'play again' it will play the complete video without any interruption.
At first I thought this was my system malfunctioning, but having set up a laptop
for a friend (using W7 Home Premium 63 bit and IE 8) the same thing is happening.
I am posting to this forum as it seems that many video problems are down to
aspects/settings of Flash Player.
All suggestions to resolve this problem greatly appreciated.

Hi, I am glad you were able to get into the BBC site. You may probably know that the BBC are
forbidden to broadcast commercial advertisements in the UK, but I understand they are allowed
to do so for some of their foreign broadcasts - to recoup some of their expenses.
It occurs to me that because the news video was preceded by an advertisement, the video had
enough time to completely download before it started to play. Does that sound reasonable?
I get the feeling that my problem is concerned with buffering and the video is starting to play before
it is completely downloaded; as I said previously, replaying the video (when the whole file is presumably
in memory) it plays right through without interruption.
As I stated in my first post, viewing videos on my friend's laptop is also having the same problem.
Instead of connecting the laptop into a network, I have disconnected my own desktop Ethernet
connection from my modem and then connected the laptop via the Ethernet. That means that the
common things to both systems are the modem and the Internet connection to my ISP, which
makes me wonder if there is a problem with the modem? It will be interesting to see what happens
when I take the laptop back to him and connect via his router.
Having checked the Shockwave Flash Object I was surprised to find it is version 10.0.045.2
whereas Adobe's 'about' page informs me that I have version 10.1.102.64 of Adobe Flash Player
installed. I understand that Shockwave is installed as part of Flash Player so do not understand
the discrepancy between versions. Could the different versions cause a conflict? However
my friend's laptop shows 10.1.102.64 for Shockwave and Flash Player.
The files in the Flash folder are - Flash101.ocx, Flash Install.log, FlashUtil101_ActiveX.dll
FlashUtil101_ActiveX.exe and install.log
With regards to streaming another site I go to is EarthCam - http://www.earthcam.com/usa/newyork/timessquare/
and have no problems watching this.
Hope you may be able to deduce something from all of the above
Thanks
ollyoscar

Screen sharing stops after few seconds

I am screen sharing between two 10.5.8 computers and have successfully shared a number of times between these 2 computers with no network changes. Now, over the past few days, whenever we start a connection, I see computer 2 and I can move the mouse for a few seconds. Then it stops and we get an iChat communication error.
Settings: Both iChats have bandwidth limit set to none, both have sufficient bandwidth (connector doctor says screen share ok). The error log says no data received in the past 10 secs, but it has not even been 10 sec.
Any ideas?

Hi,
The symptoms of those that do Block this sort of connection is that it seems to connect but gets shut down immediately.
The 10 Sec Error message means it was connected but the connection was dropped or broken or ended but not by iChat.
I would also look at Router and Modem settings.
See if your or the other end has DoS (Denial of Service) or SPI (Stateful Packet Inspection) which can impact on some Chats (Mostly Video normally).
5:32 PM Friday; October 23, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Satellite A110-180 - Fan starts but stops after few seconds

Hi,
I have a Toshiba Satellite A110-180 and when I turn on the computer the fan starts running but it stops in a few seconds and starts again in a while and stops again and starts..... Then the laptop gets heat quickly.
I bought the laptop around 5 years ago so I think that the problem is either the fan or the circuit that controls the fan. Can someone that has had the same problem make me sure that the fan is the problem?
The part number of the fan is ATZHG000500. Does anybody know if a fan with P/N ATZHG000100 is compatible with my laptop or if I can use other fan?
Thanks for your help,

Hi Boarder,
Thanks for your quick reply.
I already cleaned the fan 3 days ago because I thought that perhaps that was the reason of the fan running. I installed a program to control the hard drive and CPUs temperature and at the beginning when I turn on the laptop in the morning the temperature is ok, but when I look an email and surf by internet a little bit for 10 min the temperature increase in 10º or more in CPU and hard drive, and the fan is still running in the same way that I commented (in a discontinuous way). So I don't think that it's normal at least theoretically. I also have another laptop and the fan is running all the time.
I'll check about the thermal grease to see if the condition are fine.

Webcam always stop after few seconds...

I just want to know why does my webcam broadcasting keeps on stopping in a few seconds if I invited my friend to view my webcam. I am using MacBook with 10.4 OS X and my friend uses a Windows XP OS. Do I need to install something to enjoy my video conferencing to my friends. Though I know it would be perfect if I use the iChat AV but unfortunately some of my friends are using Windows.What is the best thing to do to enjoy chatting with my friends using windows as I enjoy iChat AV to my friends that are using Mac OS.

That's weird. I'm on a PC, and my friend has a 20" iMac. We can video chat and audio chat through AIM fine.
Sign into AIM through iChat, it should do the trick.

Youtube app stops after 10 seconds

iPad gen 1 16gb, updated to 5.1.1
I cannot seem to find out what version of the Youtube App I have.
The last week or so I've started to have problems with youtube. The video I wish to play starts but after exactly 10-11 seconds it freezes as it would if it was buffering. Instead of the video buffering however it just stops, the "Play" button down in the right corner is replaced by the "Replay" button. This seems to occur every 2-3 videos or so.
This is not a network problem and youtube is updated to latest downloadable release for 5.1.1 which it has been for a while. I have both deleted and reinstalled the app and also turned my device on and off.
Thank you for any help in advance!
Zahlo

Hello Zahlo,
Welcome to the Apple Support Communities!
I understand that the YouTube application on your iPad is not working as your would expect. I also understand that you have completed some great troubleshooting by restarting your iPad and deleting and reinstalling the YouTube application. Because the issue continues, I would suggest reading over the attached article for any troubleshooting steps you may have missed. It may even be necessary to follow the last step in the article and contact the developer of the application.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Have a great day,
Joe

Time Machine start then stop after few seconds

Hi,
I've tried to reset Time Machine (trashed the library plist file, erased the backup HD), also installed Time Machine Buddy widget.
When I start a fresh new backup, Time Machine start indexing, then stops without backup anything.
The error log of Time Machine Buddy widget is this:
Starting standard backup
Backing up to: /Volumes/TimeMachine/Backups.backupdb
Backup content size: 156.0 GB excluded items size: 1.8 GB for volume Mastoidontico
No pre-backup thinning needed: 185.11 GB requested (including padding), 1.82 TB available
Waiting for index to be ready (101)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
LaunchServices: bad alias at 0x1041d7094, size 104, CSStore size 4391026
* process 240 exceeded 500 log message per second limit - remaining messages this second discarded *
2010-02-02 18:47:12.920 ReportCrash[271:2703] Saved crash report for backupd[240] version ??? (???) to /Library/Logs/DiagnosticReports/backupd2010-02-02-184712localhost.crash
Any help to solve my problem?
Thanks!

Process: backupd [240]
Path: /System/Library/CoreServices/backupd
Identifier: backupd
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2010-02-02 18:47:12.319 +0100
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x000000014c486000
Crashed Thread: 2
Thread 0: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x00007fff80044e3a machmsgtrap + 10
1 libSystem.B.dylib 0x00007fff800454ad mach_msg + 59
2 com.apple.CoreFoundation 0x00007fff868377a2 __CFRunLoopRun + 1698
3 com.apple.CoreFoundation 0x00007fff86836c2f CFRunLoopRunSpecific + 575
4 com.apple.CoreFoundation 0x00007fff868369b6 CFRunLoopRun + 70
5 backupd 0x000000010000d2f1 0x100000000 + 54001
6 backupd 0x0000000100004014 0x100000000 + 16404
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x00007fff8005dbba kevent + 10
1 libSystem.B.dylib 0x00007fff8005fa85 dispatch_mgrinvoke + 154
2 libSystem.B.dylib 0x00007fff8005f75c dispatch_queueinvoke + 185
3 libSystem.B.dylib 0x00007fff8005f286 dispatch_workerthread2 + 244
4 libSystem.B.dylib 0x00007fff8005ebb8 pthreadwqthread + 353
5 libSystem.B.dylib 0x00007fff8005ea55 start_wqthread + 13
Thread 2 Crashed:
0 ...ple.CoreServices.CarbonCore 0x00007fff85070987 CSStoreGetUnit + 84
1 com.apple.LaunchServices 0x00007fff85df44a3 _LSBundleFindWithNode + 544
2 com.apple.LaunchServices 0x00007fff85decc79 _LSFindOrRegisterBundleNode + 219
3 com.apple.LaunchServices 0x00007fff85decb2d _LSCopyItemAttributeForRefInfoWithOptions + 201
4 com.apple.LaunchServices 0x00007fff85deea77 prepareAttributeValueForKey(__CFURL const*, __FileCache*, __CFString const*, void const**, __CFError**) + 79
5 com.apple.LaunchServices 0x00007fff85dee9dc prepareDistinctLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 36
6 com.apple.LaunchServices 0x00007fff85dee9b3 prepareLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 9
7 com.apple.LaunchServices 0x00007fff85dee7bc LSPropertyProviderPrepareValues(__CFURL const*, __FileCache*, __CFString const* const*, void const**, long, void const*, __CFError**) + 51
8 ...ple.CoreServices.CarbonCore 0x00007fff85081c90 prepareValuesForBitmap(__CFURL const*, __FileCache*, _FilePropertyBitmap*, __CFError**) + 264
9 ...ple.CoreServices.CarbonCore 0x00007fff85080779 _FSURLCopyResourcePropertiesForKeys + 980
10 com.apple.CoreFoundation 0x00007fff8683f402 CFURLCopyResourcePropertiesForKeys + 98
11 com.apple.DesktopServices 0x00007fff84b30169 TCFURLInfo::FetchProperties(bool) + 91
12 com.apple.DesktopServices 0x00007fff84b2ffbd TCFURLInfo::Initialize(__CFURL const*, bool, bool) + 183
13 com.apple.DesktopServices 0x00007fff84b8e07f TCFURLIterator::NextRaw(TCountedPtr<TCFURLInfo>&) + 79
14 com.apple.DesktopServices 0x00007fff84b8e11a TCFURLIterator::Next(TCountedPtr<TCFURLInfo>&) + 40
15 com.apple.DesktopServices 0x00007fff84b8f517 TDeepCFURLIterator::NextInternal(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 73
16 com.apple.DesktopServices 0x00007fff84b8f651 TDeepCFURLIterator::Next(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 49
17 com.apple.DesktopServices 0x00007fff84b95629 TCopyReader::GetNextItem() + 1039
18 com.apple.DesktopServices 0x00007fff84b95fac TCopyReader::Read(unsigned long long, TCountedPtr<TCFURLInfo> const&, TCountedPtr<TCFURLInfo> const&) + 128
19 com.apple.DesktopServices 0x00007fff84b80f27 TFSCopyOperation::CopyToTarget() + 607
20 com.apple.DesktopServices 0x00007fff84b82d9f TFSCopyOperation::DoCopy(TCountedPtr<TCFURLInfo> const&) + 595
21 com.apple.DesktopServices 0x00007fff84b78a68 _NodeOperation + 469
22 backupd 0x00000001000164af 0x100000000 + 91311
23 backupd 0x0000000100015923 0x100000000 + 88355
24 backupd 0x000000010000ffc7 0x100000000 + 65479
25 backupd 0x000000010000a7e2 0x100000000 + 42978
26 backupd 0x0000000100006927 0x100000000 + 26919
27 com.apple.Foundation 0x00007fff88a2be99 _NSThread__main_ + 1429
28 libSystem.B.dylib 0x00007fff8007df8e pthreadstart + 331
29 libSystem.B.dylib 0x00007fff8007de41 thread_start + 13

Video streaming stop after a few seconds

this happens in all browser. Video streaming stops after afew seconds and stop loading. i have to refresh the page and will happen the same. The only video i can play is from youtube videos only. it is happening is internet explorer, firefox and google chrome. Im using windows 7, operating system 64 bit. My internet is working right. please i need help

Try increasing your storage? http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

On my ipad video streaming stops after a few seconds only sound is playing .what could be the reason.

on my ipad 2 video streaming stops after a few seconds, only sound is playing .what could be the reason and how to solve this problem.
I have a feeling that it may have started after upgrading to ios6.

Hi,
Is this failing with Error 20 ?
Sometimes in a the router or modem if you use Port Forwarding then you are your Buddy may be missing the Screen Sharing Port.
The Screen Sharing part uses a different port to the Audio port.
As the port for Audio (And therefore Video) are known and can be port Forwarded it is the random Screen Sharing port that can be the problem.
iChat 3 info http://support.apple.com/kb/HT1507 that includes Bonjour and Jabber info
iChat 4 info http://support.apple.com/kb/HT2282
If you are not using (or your Buddy) UPnP then I would change the method of opening the port to that.
6:14 PM Saturday; June 20, 2009

TA21328 youtube videos stop playing after few seconds

While watching videos on youtube, sometimes the videos are stopping or freezing after few seconds of play. How can I fix this?

If you have a slower connection and try to watch hd then your computer won't be able to keep up. Could that be the problem? If it is, just click on the quality wheel, and watch at a lower quality, say 480.
Hugh

ISA 550W : Youtube streaming stops after few seconds

Similar Messages

Maybe you are looking for