ISA 570 , HTTPS Web Filtering not work

We just replace the new ISA 570, we enable the Web URL Filtering and config the speific web site is block to access.
We confirm Security Services > Web URL Filtering > Advanced Settings 80 and 443 is on filtering.
We test the http 80 is block the speific website but the same web site use https can bypass the URL fultering and access success.
How come?

Hi, I think below two links, may be help for you
Refer to:
http://cdetsweb-prd.cisco.com/apps/dumpcr?identifier=CSCuf81910&parentprogram=QDDTS
http://www-tac.cisco.com/Teams/ks/c3/xmlkwery.php?srId=625197659
From: [email protected]
Subject: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
See detail note for email text
From: [email protected]
To: [email protected]
Cc: [email protected]
Subject: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
Hello Team,
I do have a ISA500 case open on our queue regarding HTTPS URL filtering and I remember one of you mentioning about the problem last week.
I was able to replicate the issue customer is experiencing with https://www.youtube.com.
Do you have any updates we can provide to our customers?
Thank you,
Marcelo
(1h) 2013-03-20 22:06 GMT+000 JTSAO : Email InChange Note Status Edit as New
From: [email protected]
Subject: RE: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
See detail note for email text
From: [email protected]
To: [email protected],[email protected]
Cc: [email protected]
Subject: RE: SR 625197659 - ESC- ISA550-BUN1-K9 - Web URL Filtering //URLs are opening with https
Hi Marcelo,
There is a limitation in our HTTPS support. ISA500 may already have certificate before you configure to allow https://www.youtube.com . You need to wait for the certificate to time out before it is allowed. If you still have it configured to allow. Please check again if it works now. I am able to block facebok with HTTPS.
Regards,
Jeff
From: Marcelo Demello (mamello)
Sent: Wednesday, March 20, 2013 1:14 PM
To: isa500-tiger-team(mailer list)
Cc: email-in(mailer list)
- Toggle view for this email - - Expand ALL emails -

Similar Messages

Websense web filtering not working with 2911 with zone based firewall

Hi,
Any one ran into this issue
We use websense for guest wifi but i dont see requests hitting websense server
config is below
class-map type inspect match-any test-1
match protocol http
policy-map type inspect Wifi-test
class type inspect test-1
inspect
urlfilter websense-parmap
class class-default
drop
parameter-map type urlfilter websense-parmap
server vendor websense 10.10.1.4
source-interface GigabitEthernet0/2
allow-mode on
cache 100
zone-pair security Wifi-in-out source Wifi destination outside
service-policy type inspect Wifi-test
interface GigabitEthernet0/1
description Internet
ip address 192.168.10.1 255.255.255.0
ip nbar protocol-discovery
ip nat inside
ip virtual-reassembly in
zone-member security Wifi
interface GigabitEthernet0/2
description LAN
ip address 10.10.4.1 255.255.255.0
zone-member security inside

Hi Stan,
You should be able to adapt this config example to your environment.
Andy-
class-map type inspect match-any http-cm
match protocol http
parameter-map type urlfpolicy websense websense-parm
server <websense server IP>
source-interface <lan interface>
allow-mode on
truncate hostname
class-map type urlfilter websense match-any websense-cm
match server-response any
policy-map type inspect urlfilter websense-pm
parameter type urlfpolicy websense websense-parm
class type urlfilter websense websense-cm
server-specified-action
policy-map type inspect Inside->Internet-pm
description Inside trusted to Internet
class type inspect http-cm
inspect
service-policy urlfilter websense-pm
class type inspect Inside->Internet-cm
inspect
class class-default
drop
zone-pair security Inside->Internet source Inside destination Internet
service-policy type inspect Inside->Internet-pm
! to check status & url block counts
show policy-map type inspect zone-pair Inside->Internet urlfilter

Content Search Web Part not work for Office Web Apps

Hi ,
In Content Search Web Part word documents are not able to open in browser,but in document library its working.
Office Web Apps not work in Content search web part
Please help me
Regards
Sachin

Below is the display template to open the document in OWA.
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882">
<head>
<title>AdSpace Picture on top, 3 lines on bottom</title>

</head>
<body>

<script>
$includeLanguageScript(this.url, "~sitecollection/_catalogs/masterpage/Display Templates/Language Files/{Locale}/CustomStrings.js");
</script>

<div id="Item_PictureOnTop">

<div class="top-content-box" id="_#= containerId =#_" data-displaytemplate="ItemPictureOnTop">
<div class="top-content-img" id="_#= pictureContainerId =#_">
<a class="cbs-pictureImgLink" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_" target="_blank" id="_#= pictureLinkId =#_">
_#= pictureMarkup =#_
</a>
</div>
<h3 id="_#= line1Id =#_"><a class="cbs-pictureOnTopLine1Link" target="_blank" href="_#= $urlHtmlEncode(url) =#_" title="_#= $htmlEncode(line1) =#_"
id="_#= line1LinkId =#_"> _#= line1 =#_ </a></h3>
<span class="content-date" title="_#= $htmlEncode(line2) =#_" id="_#= line2Id =#_"><img class="cbs-Thumbnail" src="_#= $urlHtmlEncode(iconURL) =#_"
alt="_#= $htmlEncode(line1.defaultValueRenderer(line1)) =#_" id="_#= pictureId =#_" />_#=line2=#_</span>
</div>
</div>
</body>
</html>
Basically,ctx.CurrentItem.ServerRedirectedURL is calculated by a managed property ServerRedirectedURL which needs to be included in the display template.
Problem solved.
Nehal Bhandari,ATL, Nagarro Softwares

"no serializer is registered..." error with a web service not working

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

I'm using JDeveloper 10.1.3
EJB 3.0
I'm having issues with the web service not working after I create a client for it. The web service works fine up until I generate the proxy on the other side.
ERROR An error occurred for port: {http://buslogic/}MyWebService1SoapHttpPort: no serializer is registered for (class buslogic.runtime.....
I saved the file before I added the proxy and the wsdl looks the same between the working one and the non working one. I can not pin point the when the change to the web service is occuring. It seemed to work once all the way up until I had a ADF page trying to retrieve data, another time it failed when the proxy was created.
I can get the version that I saved to work immediately after the version that does not fails.
Any help would be greatly appreciated,
Dan

RV220W - Content filtering not working (?)

Hello, I bought a router model RV200W fw 1.0.1.0... nice toy.
It all works very well with the exception of content filtering. The rule only works if connections are made with the HTTP protocol, but if the user connects with HTTPS, then the rule is not considered... (???)
f.e.:
http://facebook.com (content filtered)
https://facebook.com (content NOT filtered)...
What the hell ! where I'm wrong ?
Does anyone is experiencing the same ?

Yes, the correct title was "URL FILTERING NOT WORKING"...thanks abudef000
I do not want be polemical, but I do not understand where I went wrong.
Before I buy I looked @
http://www.cisco.com/en/US/prod/collateral/routers/ps9923/ps11025/data_sheet_c78-630461.html
Check it out.
Could you assume that HTTPS URLs are not in the sentence "Static URL blocking, keyword blocking, approved URL" as stated in the product sheet ?

When Export ssrs Report to CSV file runtime filters not working

The Runtime Filters not working when Export SSRS Report to CSV format

Hi PatilPriti,
As for my understanding, the filter worked fine when you preview the report,
but it did not work when you export the report to CSV format. I tried to export the report to CSV file on my side, and the data was shown as expected. I guess the issue is due to the parameter or filter. please try to export to Excel format to test again
and make sure you created the filter correctly. Please refer to the following
blog about how to add a filter in SSRS:
http://arcanecode.com/2010/07/12/adding-filter-parameters-to-sql-server-2008-reporting-services-reports/
If the problem is not resolved, i would appreciate it if you could give us
detailed description of your problem.
It’s better to provide the table structure and some sample data, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

FRM-10142- The HTTP listener is not working in mypa at port 9001 in form11g

I new in forms 11g and I upgrading the forms 6i to 11g and I installed the forms11g successfully when I run the form after compiling it it give me the error.
*"FRM-10142- The HTTP listener is not working in mypc at port 9001. Please start the Listener or check your runtime setting"*
In form runtime preference I modified the web browser location to C:\Program Files\Internet Explorer\IEXPLORE.EXE.
Your Suggestions will be appreciated
Thanks in advance.

Hello,
The WLS managed server WLS_FORMS must be started .
You can use a BAT script containing the following command lines to start it :
title WLS_FORMS
set DOMAIN_HOME=D:\oracle\fmw11g\user_projects\domains\ClassicDomain
cd %DOMAIN_HOME%\bin
set SERVER_NAME=WLS_FORMS
call setDomainEnv.cmd
cd %DOMAIN_HOME%\bin
set WLS_USER=weblogic
set WLS_PW=password
call startManagedWebLogic.cmd WLS_FORMS http://127.0.0.1:7001
Regards

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

Web links not working in iPhone calendar notes. Used to work. Ideas?

Web links not working in iPhone calendar notes. Used to work. Ideas?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

Some web sites not working in FF but they are OK in Safari.

A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJT

Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you

The web controls not work(windows phone)

Hi
I have a web app.after I make an animation in this page(like a transition page in loading page), the web controls not work more.
the site is shown but any thing not work like scrolling or tap in links

Can you please explain more clearly what you are doing and what you need help with? What is your overall scenario, what exactly is your code doing, what behaviour do you expect and how is that different from what you actually see?

ProtectLink Web Protect URL Filtering not working

Good day!
Please help.
We have a problem on our RV042 router.
The Protectlink WebProtect URL filtering is not working.
When we first activate the service (Nov. 12), it worked for a few days, then 2 days ago, our internet connection got problems. But yesterday, our ISP fix the problems on our internet connection, but the URL filtering of WebProtect is not working anymore even if it is enable, up to this time.
What should we do about this problem?
Thanks in advance for your kind replies!

i have installed TMG 2010 and created url filtering rule for facebook.com but that problem
is ever after five minutes i can see that the users can access facebook. and then i check in TMG MMC so i can see that the Category Query says me that facebook.com is unknown....but just after five minutes i can see facebook has been automatically blocked
and i can also see in Category Query it says me facebook is in blog/wiki category...
so why it is changing automatically every after 5 or 10 minutes :( ?
where is the problem ???
i need your help please !!

Weblogic Http Apache Plugin not working

Hi,
I have installed weblogic server 10.3 on WindowsXP Professional and Http Apache 2.2 is running on port 80. I followed the following document to configure the Apache plugin:
http://e-docs.bea.com/wls/docs103/plugins/apache.html
but when I go and test the plugin it always comes back with 404 page not found. As per the documentation I am testing it as
http://localhost:80/weblogic/
Here is my httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the
# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which httpd.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths to avoid confusion.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule authn_alias_module modules/mod_authn_alias.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_host_module modules/mod_authz_host.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule deflate_module modules/mod_deflate.so
LoadModule dir_module modules/mod_dir.so
#LoadModule disk_cache_module modules/mod_disk_cache.so
#LoadModule dumpio_module modules/mod_dumpio.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule imagemap_module modules/mod_imagemap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
#LoadModule ldap_module modules/mod_ldap.so
#LoadModule logio_module modules/mod_logio.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule status_module modules/mod_status.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule unique_id_module modules/mod_unique_id.so
#LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule version_module modules/mod_version.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule weblogic_module modules/mod_wl_22.so
<IfModule mod_weblogic.c>
WebLogicHost localhost
WebLogicPort 7001
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
</Location>
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User daemon
Group daemon
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName localhost:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
ProxyRequests On
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "logs/error.log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "logs/access.log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "logs/access.log" combined
</IfModule>
<IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://localhost/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock logs/cgisock
</IfModule>
# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://localhost/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>Is there anything else I need to add to this file. As I am trying to install ALUI and for this I need to add the plugin as when I go to my portal page none of the
images shows. Any help is appreciated.
Thanks

Hi,
There is patch for the webserver(Apache Plugin),thats needs to be downloaded from Metalink,dont use the default plugin that comes with the weblogic 10.3 installtion.
Regards,
Dinesh

Web template not working

Hi,
when I try to open a Webtemplate via
the Internet Explorer it is not working.
Please assist.
Regards,
Anita

You can determine the properties of the Web template both in an object tag (see Object Tag for the Properties of Web Templates) and or with command Call Web Template.
CMD
LDOC
Parameter
Description
TEMPLATE_ID
Name of the Web template
Name under which you stored the Web template in the Web Application Designer.
STATELESS (optional)
X = Yes, = No
End the connection to the server as soon as possible
For Web templates that are used almost exclusively for display without further navigation, it is more useful to set the attribute STATELESS. The session on the application server is terminated when the Web template is created. This saves resources on the application server.
If this attribute is not specified, it is assumed that the page is still needed for navigating.
USE_PERSONALIZATION (optional)
X = Yes, = No
Use personalized Web template
If the parameter is set to X, the personalized Web template for the current user is used. If personalization does not exist for the Web template or the parameter is not set, the Web template is executed without personalization.
STYLE_SHEET (optional)
Path for a stylesheet that you want to use to display the Web template.
This overwrites any stylesheet that you may have already assigned.
TRACE (optional)
X = switch on, = do not switch on
Switch on OLAP trace
To analyze problems with SAP, you usually need a trace. You can activate the trace with the help of note 112458 or by using the TRACE parameter.
JAVASCRIPT (optional)
X = switch on, = do not switch on
Use of JavaScript
Using this parameter, you ensure that Web applications are created using JavaScript (extensive interaction options) or suppress the use of JavaScript (restricted interaction).
If this parameter is not transferred, JavaScript is activated automatically in Web browsers of version >=4.0.
SNIPPET_OPERATIONS (optional)
X = switch on, = do not switch on
Reload changed components of the page
You use this parameter to control whether only changed objects are loaded in navigation. This function has higher Web browser requirements. For this reason, this function is only supported by MS Internet Explorer version >=.
If this parameter is not transferred, loading is activated automatically for the suitable Web browsers.
ENABLE_OPEN_WINDOW (optional)
X = switch on, = do not switch on
Open new window
Using this parameter, you can control whether a new browser window is opened, for example, for the properties dialog box or for filtering. If this parameter is not specified, new windows are opened (if supported by the Web browser).
VARIABLE_SCREEN (optional)
X = display variable screen, = do not display, if possible
Display variable screen
If you call up a Web template that has query views containing variables that are ready for input, you can use these parameters to display the variable screen. Is you do not set this parameter, or set it to , the variable screen is hidden, whenever possible. However, it will still be shown if, for example, the required variables that are ready for input have not yet been filled.
MELT_VARIABLES (optional)
X = merge, = display each query individually
Merge variables
If you call up a Web template containing several query views that have variables that are ready for input and you go to the variable screen display, you can determine, through these parameters, whether variables, which are used in all query views and in the same context (same InfoProvider, same compounding), are to be provided for input only once.
VARIABLES_CLEAR (optional)
X = reset variable, = do not reset
Reset default variables
If you call up a Web template that contains one or several query views that have variables that are ready for input, you can specify this parameter to reset the default variables through the query view. The variables then contain the defaults from the variable definition.
SUPPRESS_WARNINGS (optional)
X = do not display warnings, = display warnings
Suppress warnings
With this parameter, warnings are not displayed. With this parameter, warnings are not displayed.
SUPPRESS_SYSTEM_MESSAGES (optional)
'X' = Do not display system messages
' ' = Display system messages
Suppress system messages
With this parameter, system messages are not displayed.
DATA_MODE (optional)
NEW = use current data
STORED = Use precalculated data
HYBRID = use precalculated data, request current data if this is missing.
STATIC = use precalculated HTML pages
STATIC_HYBRID = use precalculated HTML pages, if there are none, search by precalculated data and when there is none, request current data
Data mode
This parameter is optional. If you do not specify one of the options for this parameter, a request is always sent to the OLAP processor and current data is read.
For the modi STORED and HYBRID, data has to be precalculated using the Reporting Agent.
See Defining the Web Templates Setting
The parameters PAGEID and WBID that are used in BW 2.x are supported for the Web templates created under BW 2.x. We recommend, however, that you no longer use these.
Calling up the Web template without navigating
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&STATELESS=X
Calling up the Web template with trace switched on
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&TRACE=X
Calling up the Web template with reset variables and active variable screen
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&VARIABLE_SCREEN=X&VARIABLES_CLEAR=X
Thank
Bhima

Cisco css http keepalive is not working with GET command

Dear all
i have Cisco Css connected to Dell Server (via switch)
Cisco CSS - 192.168.1.3 and Dell Server - 192.168.1.5
Dell server is setup with windows 2009R2 and Apache HTTPD is version 2.2
This server is dedicated to host multiple doamins with Apache lik
www.abc.co.uk
www.xyz.co.uk
Now the clinet wants to setup the http keepalive with specfic web page like /testpage.html for all these domains. i have teseed with single URI. it is working the comamnds are
config)# service serv1
(config-service[serv1])# ip address 192.168.1.5
(config-service[serv1])# keepalive type http
(config-service[serv1])# keepalive method head    ( get i have not used due to hash mismatch with apche server, if i use GET it is not working)
(config-service[serv1])# keepalive uri "/testpage.html"
(config-service[serv1])# active
It is working with single URI. but how can i do the same thing for multiple doamins ?
for multiple doamins do i need use script ? or can i use with commands ?
if i need to use script the script is
!no echo
! Filename: httptag-test
! Parameters: HostName WebPage HostTag
! Description:
!       This script will connect to the remote host and do an HTTP
!   GET method upon the web page that the user has asked for.
!   This script also adds a host tag to the GET request.
! Failure Upon:
!   1. Not establishing a connection with the host.
!       2. Not receiving an HTTP status "200 OK"
if ${ARGS}[#] "NEQ" "3"
        echo "Usage: httptag-test \'Hostname WebPage HostTag\'"
        exit script 1
endbranch
! Defines:
set HostName "${ARGS}[1]"
set WebPage "${ARGS}[2]"
set HostTag "${ARGS}[3]"
! Connect to the remote Host
set EXIT_MSG "Connection Failure"
socket connect host ${HostName} port 80 tcp
! Send the GET request for the web page
set EXIT_MSG "Send: Failed"
socket send ${SOCKET} "GET ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
! Send the HEAD request for the web page
set EXIT_MSG "Send: Failed"
socket send ${SOCKET} "HEAD ${WebPage} HTTP/1.1\nHost: ${HostTag}\n\n"
! Wait for a good status code
set EXIT_MSG "Waitfor: Failed"
socket waitfor ${SOCKET} "200 OK"
no set EXIT_MSG
socket disconnect ${SOCKET}sh w
exit script 0
in the script i have not used GET becasue, when CSS send GET request to apache it use hash, but apache is not able to respond with same hash and it shows that website is down. more information- click below url
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v7.40/command/reference/CmdKeepC.html#wp1139668
(config-keepalive) method
I have uploaded in CSS with httptag-test file and applied these commands
service comp.brit.co.uk-80
keepalive port 80
ip address 192.168.1.5
keepalive frequency 10
keepalive maxfailure 2
keepalive retryperiod 10
keepalive type script httptag-test "192.168.1.5 /testpage.html www.abc.co.uk
keepalive type script httptag-test "192.168.1.5 /testpage.html www.xyz.co.uk
but this script is not working
my question is:
1.do i need use script only to setup http keepalvie with webpage for multiple domains ?
2.with out using script is there any solution like CICSCO CSS commands to setup http uril for multiple domains which are on 1 singl server.
please help me asap

Hello Muhammad,
If you wish to use multiple domains for a URI keep-alive check, and perform a HEAD request what Daniel mentioned is correct. You have to use a scripted keep-alive check on the service. However, you should not use the default "ap-kal-httptag" script to do so as it's limited to only 1 website (unless you modify the script). You're best bet would be using the "ap-kal-httplist" script on the CSS as it allows the checking of 2 different websites along with a webpage to check for each site using HTTP HEAD method.
!no echo
! Filename: ap-kal-httplist
! Parameters: Site1 WebPage1 Site2 WebPage2 [...]
! Description:
!    This script will connect a list of sites/webpage pairs. The
!   user must simply supply the site, and then the webpage and
!   we'll attempt to do an HTTP HEAD on that page.
! Failure Upon:
!   1. Not establishing a connection with the host.
!   2. Not receiving a status code 200 on the HEAD request on any
!      one site. If one fails, the script fails.
! Make sure the user has a qualified number of arguments
if ${ARGS}[#] "LT" "2"
        echo "Usage: ap-kal-httplist \'WebSite1 WebPage1 WebSite2 WebPage2 ...'"
        exit script 1
endbranch
while ${ARGS}[#] "GT" "0"
        set Site "${ARGS}[1]"
    var-shift ARGS
    if ${ARGS}[#] "==" "0"
        set EXIT_MSG "Parameter mismatch: hostname present but webpage was not"
        exit script 1
    endbranch
    set Page "${ARGS}[1]"
    var-shift ARGS
    no set EXIT_MSG
    function HeadUrl call "${Site} ${Page}"
endbranch
exit script 0
function HeadUrl begin
! Connect to the remote Host
set EXIT_MSG "Connect: Failed to connect to ${ARGS}[1]"
socket connect host ${ARGS}[1] port 80 tcp 2000
! Send the head request
set EXIT_MSG "Send: Failed to send to ${ARGS}[1]"
socket send ${SOCKET} "HEAD ${ARGS}[2] HTTP/1.0\n\n"
! Wait for the status code 200 to be given to us
set EXIT_MSG "Waitfor: Failed to wait for '200' on ${ARGS}[1]"
socket waitfor ${SOCKET} " 200 " 2000
no set EXIT_MSG
socket disconnect ${SOCKET}
function HeadUrl end
Rather then modify the default "ap-kal-httplist" script on the CSS I would simply define the arguments within the service configuration itself.   Something like the following (using your service example):
service dell-192.168.1.5
ip address 192.168.1.5
keepalive type script ap-kal-httplist "www.abc.co.uk /testpage.html www.xyz.co.uk /testpage.html"
active
As long as the server is configured to reply to host headers, and the page is configured to retuen a "200 OK" the above service configuration should work. If there are any errors simply run "show service " to view why there was a failure. If there is a failure, and the output from the command specified shows a line number run the following command against the script to view at what point (line) did the failure occur:
show script ap-kal-httplist line-numbers
Hope this helps!
- Jason Espino

ISA 570 , HTTPS Web Filtering not work

Similar Messages

Maybe you are looking for