ISA (Microsoft firewall) blocks Essbase Server comm.
Has anyone any experience with a locally (laptop) installed ISA firewall and Essbase Server ?I my case the ISA firewall stops all connection between the application and the Essbase server making the server crash.The firewall has only been set up to redirect communication on the external port to a proxy server, but when off-line it blocks Essbase, even though it is internally communication on port 1433 and 32768++.RegardsMartin
The below link is for SP1 and
http://support.microsoft.com/kb/2616326/en-us is the link for the update package. The update packages for ISA can be seen as "mini-servicepacks" as they are cumulative and includes fixes previously released.
Also, make sure that you have updated SQL Server Express (SSE) properly to avoid any issues there.
Yes, textlogging is more effective in the sense that it consumes less disk space and is generally faster. Look in the logging section in this article,
http://technet.microsoft.com/en-us/library/bb794817.aspx. Furthermore review this article (yes, it does apply to 2006 as well)
http://technet.microsoft.com/en-us/library/cc302682.aspx.
One of the key differences between SSE and text logging is that when using textlogging, you can't search the logs for what has happened (previous records), only live data.
Btw, you don't happen to have anti-virus running on this box? If you do, seriously consider removing it. This should be the first thing you check, for further details, see
http://support.microsoft.com/kb/887311/en-us.
Hth, Anders Janson Enfo Zipper
Similar Messages
-
Hello,
I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds).
The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs. I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem. I have no VLANs setup. I do have the Firewall on the router configured
to inspect most traffic.
Here is my problem: I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers. Here is what I already know:
1.) I can ping the outside world just fine so ICMP is passing to any external host.
2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works. I can also go to a couple other Microsoft websites (though they are very slow). If I click on any link in Bing, however, it doesn't
work and gives me a page not available error. If I connect to a non-MS website like Google or my company website, I get page not available.
4.) I have tried to telnet to port 80 at Bing and it works. I have tried to telnet to port 80 at google.com and it won't connect. The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
PCs on the network do either.
5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
just to see if it could connect after a fresh install and it still cannot.)
6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
7.) If I connect the server directly to the modem it has full internet access.
8.) All internal LAN connectivity is perfectly fine and runs at full speed.
9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with? I ask because, unlike in these two articles where they were
running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it. I have to assume the issue is somehow related to the firewall configuration,
which I could fix easily, but I don't know what to change. If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along. Thanks.This is the IP Config for the 2012 DC:
Windows IP Configuration
Host Name . . . . . . . . . . . . : COMPANYDC02
Primary Dns Suffix . . . . . . . : company.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.10.10.1
DHCPv6 IAID . . . . . . . . . . . : 301999504
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
DNS Servers . . . . . . . . . . . : 10.10.10.202
10.10.10.221
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
This is the IP Config for the fresh install 2012 VM:
Windows IP Configuration
Host Name . . . . . . . . . . . . : WIN-800299O7ES6
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : company.local
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . : company.local
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
Default Gateway . . . . . . . . . : 10.10.10.1
DHCP Server . . . . . . . . . . . : 10.10.10.1
DNS Servers . . . . . . . . . . . : 10.10.10.220
10.10.10.221
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.company.local:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : company.local
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network. One of them is 2012 and one of them is 2008. They are both functioning correctly for providing DNS services. The 2012 Virtual DC, however, still has
the internet connectivity issue that this whole post was about in the first place.
NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded. Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
at 10pm. Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully... -
10.6 Server's Firewall Blocks It's Own Internet Connection
I had this problem about two years ago when I was trying to run 10.6 on my home server (Mac mini) for the first time. Eventually I gave up, reverted the mini back to 10.5, and ram problem-free for years. When 10.7 came out, I tried to upgrade the mini to that. That didn't go well either, but mostly due to Lion missing many many features (suprise!). So I figured that 10.6's problems were fixed by now, and gave it another shot. It went fine and I've been running for about a month problem free (or so I thought). But now it's offline again. I finally found one other person on another forum that had the EXACT same problem as me. And reading this description, I realize that I have been having problems all long, I just assumed they were my ISP's problems, not my own.
So here's what happens. The firewall in 10.6 server will "freak out". It will be running normally, then suddenly it will go haywire and block everything. And I mean everything. My computer won't even be able to get an IP via DHCP. Everything is blocked. But as soon as you stop the firewall, everything works normally. You can even modify the firewall rules, and set it up so there are NO deny rules, and EVERY connection to and from every host is set to allow. And the firewall still blocks everything. This is the same exact thing that happened 2 years ago when I first tried to run 10.6 Server on my mini. The difference is that back then, this would happen either immediatly, or within a day. This time around, with 10.6.8, it took about a month before suddenly, without any provocation, all internet connections stopped.
I've had this happen on multiple computers. I don't do anything special, I just set up a basic firewall scheme where everything in the LAN range is allowed, and everything from "any" is allowed only to service ports I'm running. The basic gateway setup. Now I was running 10.6 Server on my laptop (for netbooting) and it would do the same thing. But because my laptop wasn't acting as a gateway, I could just turn the firewall off (you need the firewall for NAT). My mini server IS acting as a gateway, as was another mini I set up for a client of mine (that eventualy I changed over so they were running off an airport, and the mini server was just a client. But I don't want that setup at home, I want my mini to be the router).
I have verizon Fios internet. 25/25, it's great. The ONT is in my basement, and it's plugged into the same fused outlet as our freezer. From time to time, when the power goes out, it trips that breaker and the outlet goes dead. My itnernet is gone and I have to go reset the outlet. Once I do, my mini won't get an IP from Verizon until I reboot the mini. Not once. Not twice. Usually 5-10 reboots, and suddenly it will get an IP. I always assumed this was a verizon problem. Until I read someone else's post about this same problem. Turns out, that's the firewall blocking DHCP again! If you turn the firewall off, you don't have to keep rebooting, it will grab an IP right away.
At least I'm not crazy! So what is going on here? Does anyone have any idea what is going on with my firewall, or how I can fix it?
Lastly, after 4.5 hours of complete inability to get an internet connection with the firewall on, it just started working again. I now have fully functional, normal internet. I find it hard to believe 10.6 has a firewall that is simply broken. I find it even harder to believe I'm imagining things, or that I've had fluke after fluke. Something is going on with 10.6 Server.The DNS skapegoat just doesn't make sense.
Why would "improper" DNS cause OS X's firewall to block all network connections? Even the server's ability to make it's own DHCP connection?
As far as a router, I don't want to use a cheap unreliable residential router. I have a home file server that, aside from running 10.6, makes a super reliable router. And port mapping aside, OS X Server's DHCP server is great to use. Rock solid. It makes no sense to run a cheap residential router when I have a home server. Then every 6-18 months, I get to deal with that router slowly failing, as my internet connection gets slower and slower. No thanks.
So back to this firewall issue. I've talked to Apple aobut this before, and they give the same generic "DNS has to be right" answer to basically every problem I've ever had with 10.6 Server (hinting at endless CalDAV problems). But no one has every explained what that specifically means, or how something like wrong DNS (whatever that even means) can cause the firewall to block everything. This just makes no sense to me. And this especially does not explain why, after 10 reboots or so, everything just magically starts running normally.
I just had an incedent today where I woke up to no internet. I rebooted 3 times. Each time, I either got a self-assigned IP address, or the ethernet interface would toggled between "unplugged" and "no-ip". I could turn the firewall off and the server would INSTANTLY start functioning normally. I'd happily run without a firewall, and just turn all services I'm not using off. However NAT needs the firewall, so without the firewall, the Server is the only Mac on the network that has an internet connection. So I kept rebooting and rebooting, and I think about 8 reboots later, like magic, the server came up, grabbed an IP, and everything started working normally.
Also my IP through my ISP is dynamic, and that isn't going to change. So yes, I am trying to use OS X Server as my router on a dynamic internet connection. I've been doing this since the days of Mac OS X Server 10.1. Only 10.6 has had any problems at all.
So really, "10.6 is more picky about DNS" isn't an answer to this problem. Or, at least, it's not a sufficient answer. I need much more information than that. -
Microsoft Firewall Client blocks the SBO client
Dear All,
We have upgraded our client from 2004C to 2007A SP 46.
The upgrade was successful, but there were some problem with the clients.
The client didn't start, the solution for this we have to disable the Microsoft Firewall Client.
Now it is a good solution, but not for a long time.
So could you tell me, how can we setup the Microsoft Firewall Client, is we want the use SAP clients?
There weren't any problem, with 2004C clients, what happened? What we have to setup on this kind of firewall?
Thanks : VeronikaHi Veronica,
Basically the the type of connection how SAP Business One connects to the license server has been changed when comparing both Business One versions. Version 2004 uses DCOM in order to connect to license service, but from 2005 version there is a port available and DCOM is not longer used.
Your local Windows Administrator should be able to open ports 30000 and 30001 within Windows Firewall.
Kind regards
Mario -
Unable to expand Essbase server in EAS console
Hi All,
I have recently installed and configured Oracle Hyperion EPM Essbase 11.1.2.2 in a distributed virtual environment (One Foundation/WLServer VM, One Essbase VM, One Oracle11g DB VM). Host OS: MS Win server 2008 x64 (SP1).
I am using Native Directory for authentication.
I am able to login and connect to the Essbase Administration server in the EAS console. But when I try to expand the Essbase server in the EAS console, the Hy9Seas.exe process gets crashed in the background (Hyperion Admin services - web application service stops).
Here's the error log from the WebLogic EssbaseAdminServices server log:
####<Nov 26, 2013 8:43:44 PM IST> <Error> <ServletContext-/easconsole> <DEVHSS> <EssbaseAdminServices0> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KAKyI4M5yW^5xV^AyW1I_Awp00001b> <1385478824433> <BEA-000000> <Internal error:
java.net.SocketException: socket write error: Connection aborted by peer
at jrockit.net.SocketNativeIO.writeBytesPinned(Native Method)
at jrockit.net.SocketNativeIO.socketWrite(SocketNativeIO.java:46)
at java.net.SocketOutputStream.socketWrite0(SocketOutputStream.java)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at weblogic.servlet.internal.ChunkOutput.writeChunkNoTransfer(ChunkOutput.java:591)
at weblogic.servlet.internal.ChunkOutput.writeChunks(ChunkOutput.java:540)
at weblogic.servlet.internal.ChunkOutput.flush(ChunkOutput.java:427)
at weblogic.servlet.internal.ChunkOutput$2.checkForFlush(ChunkOutput.java:648)
at weblogic.servlet.internal.ChunkOutput.write(ChunkOutput.java:333)
at weblogic.servlet.internal.ChunkOutputWrapper.write(ChunkOutputWrapper.java:152)
at weblogic.servlet.internal.ServletOutputStreamImpl.write(ServletOutputStreamImpl.java:148)
at jnlp.sample.servlet.DownloadResponse$FileDownloadResponse.sendRespond(DownloadResponse.java:231)
at jnlp.sample.servlet.JnlpDownloadServlet.handleRequest(JnlpDownloadServlet.java:178)
at jnlp.sample.servlet.JnlpDownloadServlet.doGet(JnlpDownloadServlet.java:113)
at com.essbase.eas.server.WebStartDownloadServelet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Nov 26, 2013 8:43:44 PM IST> <Error> <HTTP> <DEVHSS> <EssbaseAdminServices0> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000KAKyI4M5yW^5xV^AyW1I_Awp00001b> <1385478824511> <BEA-101020> <[ServletContext@10109138[app:EAS module:easconsole path:/easconsole spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.IllegalStateException: Response already committed
at weblogic.servlet.internal.ServletResponseImpl.objectIfCommitted(ServletResponseImpl.java:1629)
at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:637)
at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:602)
at jnlp.sample.servlet.JnlpDownloadServlet.handleRequest(JnlpDownloadServlet.java:191)
at jnlp.sample.servlet.JnlpDownloadServlet.doGet(JnlpDownloadServlet.java:113)
at com.essbase.eas.server.WebStartDownloadServelet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
I am able to log into Essbase server via MaxL shell (essmsh.exe).I have checked out all the logs on Essbase server, they are fine. The Hyperion Shared Services console is working fine as well.
I have tried to increase the Maximum message size & POST timeout to maximum in WLServer. I have also removed firewall from all the ports of the VMs. But nothing seems to work.
I went through other such cases of this error on OTN, John Goodwin's blog and internet but I could not find a conclusive solution anywhere.
Can some one please help me figure out where the problem might be? Point me to some logs?
Thanks & Regards,
IshanThe error "<Internal error: java.net.SocketException: socket write error: Connection aborted by peer...." can be ignored as it is common message.
It might be worth checking out the EAS patches because I think some of them address problems with EAS crashing, also if you are using the web console make sure a supported java version is being used.
Cheers
John
http://john-goodwin.blogspot.com/ -
Cannot Add Essbase Server From Admin Services Consol
Hi
I am trying to add a new essbase server to my Admin Services list. I get the following error message:
Error: 1042006: Network error [145]: Unable to connect to [SERVERNAME:1423].
The client timed out waiting to connect to Analytic Services Agent using TCP/IP.
Check your network connections.
Also make sure that server and port values are correct
The essbase services are running on the other machine.. And I can communicate with the other box using FTP etc. So I think I need to get some ports opened between the source and target servers.
Can anyone please tell me what ports should I try to get opened. I read the documentation from help menu and it talks about some server.xml file and also says that you need to specift the port names unless they are something other than defaults. But I am not very clear about this.
Can anyone please help me to figure out what exactly is going wrong ?
Thanks
Mandar JoshiReview the essbase.cfg on the server machine and look at the SERVERPORTBEGIN and SERVERPORTEND entries. You would want those entries as well as 1423 opened.
For default configurations ensure any firewall has the below ports opened from the client to the server:
TCP/1423
TCP/32768 through TCP/33768
Regards,
John -
Essbase server properties OS tab without values
Hi guys,
I need a guidance about Essbase server properties.
I just installed essbase server 9.3.1.2 and other Hyperion such as HSS and BI with 9.3.1 version.
The architecture is
HSS(machine A), Essbase Server (Machine B), EAS & BISvcs (Machine C), BI Svcs (Machine D)
Problem occured when I opened up the properties of the essbase server and on the "OS" tab and "Disk Drives" tab has nothing inside. I checked my local machine and I got value such as OS : Windows server 2003 etc.
I did telnet for essbase port (every port in fact) and every single one are opened, I also confirm with the network manager and he said "no ports are block in our network".
Can somebody help me why this is happen?
Thanks.This is a genric message which says could not connect to agent. Try the following:
- Check to see if your Essbase server agent is started and running
- Try with IP adress instead of server name to test.
- Increase NetRetry configuration setting in Essbase.cfg file and see if it resloves the issue.
Hope this helps!!
-Nra -
Diagnostic-code: smtp;550 message was blocked by server (GWAVA blocked
I am having problems sending emails
diagnostic-code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: ,
The message is as follows:
Reporting-MTA: dns;BLU004-OMC4S31.hotmail.com
Received-From-MTA: dns;BLU436-SMTP7
Arrival-Date: Fri, 6 Jun 2014 09:57:27 -0700
Final-Recipient: rfc822;xxxxxx@xxxxxxx
Action: failed
Status: 5.5.0
Diagnostic-Code: smtp;550 Message was blocked by server (GWAVA blocked: ipreputation, reference ID: str=0001.0A0B0201.5391F2F9.0044,ss=1,re=0.000,recu=0.000,reip=0.000,cl=1,cld=1, fgs=0)
Any help would be great its been happening for a few daysHave you setup a Accepted Domain for your SMTP domain on the Exch server?
http://technet.microsoft.com/en-us/library/bb124423(v=exchg.141).aspx &
http://technet.microsoft.com/en-us/library/bb124911(v=exchg.141).aspx#EMC
And you may want to setup an EAP -
http://technet.microsoft.com/en-gb/library/bb125137(v=exchg.141).aspx
Sukh -
TMG Microsoft Firewall Service Process (wspsrv.exe) high CPU.
CPU Usage 100%
Please help me.
ThanksHi,
Since there can be multiple reasons for this issue, you can
capture a manual dump of the wspsrv.exe process on TMG server or find some related logs to better analyze this issue firstly.
In addition, what have you done before you encountered that issue?
If you have any third-party programs installed, you can temporary disable them and restart the firewall service to see if the issue persists.
For more detailed information, please refer to the links below:
How
to capture a manual dump of the wspsrv.exe process on TMG 2010?
Using
DebugDiag 1.2 to Automate Dump Analysis – TMG High CPU Utilization Scenario
Best regards,
Susie -
Configuring an Additional Instance of Essbase Server to one shared service
Hi ,
I currently have two separate installation of shared services with its own Essbase server(version EPM 11.1.1.1). I want to shut down one shared service and keep both the Essbase servers up pointing to only one shared services.
Can we have two independent installation of Essbase servers point to one shared service . If yes , can you direct ,me to the correct document or steps.
Thanks
1661623Started finally.
Seems like 32 bit service application as it still requires DWORD not QWord.
https://support.microsoft.com/en-us/kb/2910363
Hyder Zaidi -
Win7 firewall blocking radius requests
I have installed an open source radius server on my Windows 7 machine & I want to know why Windows 7 is blocking Radius server requests inbound? A device on my LAN sends an authorization request on UDP port 1645 towards the radius server. To confirm
this, I put a packet sniffer just before the radius server to check the requests are coming inbound & I checked the port, so I'm certain it's coming in on 1645 (the actual request comes from a switch and the source and destination ports were the same in
the capture). I therefore created an inbound rule to allow this through the Windows firewall but it doesn't appear to work. When the firewall is disabled, the authentication request is successful.
I can't actually attach a picture, so I will just explain the rule as best I can:
Accept inbound UDP port 1645 to any port. All profiles (domain, private, public), all programs, and all IP addresses
I'd like to know if there is a way I can see a live feed of denied packets inbound so I can spot what is actually causing the problemLook for a blocking rule. Windows Firewall might have created a blocking rule or there might be a different blocking rule causing the problem.
Also turn on logging of dropped packets in the windows firewall so that you can see if it is the one dropping the traffic. -
Firewall blocks Airplay (even under 'allow all traffic')
Hi every body,
I am somewhat at the end of my knowledge. I have a mac mini server running Lion 10.7.2 server. Interestingly, my the server's firewall blocks
a) all airplay traffic and
b) 'reading Airport confirguration' requests
even when the firewall is set to 'allow all traffic'. However, when I completely switch it off, everything works just fine.
Any help would really be appreciated.
Thanks a lot.
Nonresidentalien
P.S. I have also tried to open ports 80 (t), 443(t), 554 (t/u), 3689(t), 5297(t), 5289(t/u), 5353(u), 49159(u) and 49163(u) with no successPointing to the IPv6 thread was a good idea. After reading it, I found out that the firewall preferences in Server Admin only show you IPv4 related firewall rules.
There is a terminal command that allows you to play with IPv6 rules. And by doing so, I was actually able to get AirPlay working again.
First, you want to show you the current IPv6 firewall rules. In my case they looked like this (10.7.2):
reptilehouse:~ sascha$ sudo ip6fw show
01000 285 96163 allow ipv6 from any to any via lo0
01100 66 5750 allow ipv6 from any to ff02::/16
65000 0 0 deny ipv6 from any to any
65535 6 306 allow ipv6 from any to any
As you can see, rule number 01100 only allows traffic to the local subnet, while the next rule (65000) blocks anything else. So you want to get rid of 65000:
reptilehouse:~ sascha$ sudo ip6fw delete 65000
To confirm, show the rule table again and you should see 65000 is gone:
reptilehouse:~ sascha$ sudo ip6fw show
01000 285 96163 allow ipv6 from any to any via lo0
01100 66 5750 allow ipv6 from any to ff02::/16
65535 6 306 allow ipv6 from any to any
Mind you, the rule numbers could be different on your system and you could see more or less rules. But you get the idea.
What I don't know if whether this is sticky, e.g. survives a reboot. -
Firewall blocking access to Hyper-V Virtual Machine. Please hep!
Hi there, I hope this is the right spot for this. Allow me to explain the setup we have. We have a server with Hyper-V installed and a VC made for a DC for a small domain we have. I was able to remote into the new DC, and our exchange server
was picking it up as a DC. So far so good.....
Now, here's where we seem to have a problem. We Installed 'Symantec Endpoint Protection' As we have this on a few servers, we had a set of settings for servers. (I didn't set this part up) Now. the problem we are having is that it seems the end point protection
on the Hyper-C Host is blocking connections from Exchange/other computers (access shared folders and logging in). What can i do to resolve this? Connections seem to be fine, (Exchange will pick up the the DC, and i can access shared
folders) when i disable the firewall and network threat protection on the Hyper-V Host.
Our Exchange server is 2010
We are using Server 08 R2
Can someone please advise me on how i can get this resolved, so i don't have to leave the server with Hyper not behind a firewall or network threat protection.Hi,
I am Chetan Savade from Symantec Technical Support Team.
There was a known issue between SEP and Hyper-V traffic. It's been resolved in the latest release of SEP. If not using the latest version upgrade to the latest version can be a possible solution.
SEP 12.1 RU4 MP1a (12.1.4104.4130) is the latest verison.
HyperV traffic was blocked with Symantec Endpoint Protection Firewall enabled
Fix ID: 3181006
Symptom: The Symantec Endpoint Protection firewall blocks HyperV traffic.
Solution: Modified the loopback packet processing in the Teefer driver.
Reference: http://www.symantec.com/docs/TECH216262
Best Regards,
CHETAN -
The connection between ADM and Essbase Server is lost?
I can login essbase server with MaxL, excel spreadsheet, the Essbase Administration Service is started by command line and it shows running fine, But I cannot login to Essbase through ADM console, the error message is: Could not connect to the Administration Server
thanks!You really should change your architecture. I assume that your other controls also control the robot, so you will need more complex messaging.
I suggest you look at some of the examples and templates for queued message handler. Essentially, this will allow you to send message between two loops, which is probably what you want.
As for what your comm loop should actually look like, you should separate the opening part from the communicating and closing part. That way, you can send the Ready string immediately after connecting. The example code you used already handles the timeout error, which is the indication you want that the connection was lost.
Here's one (very bad) example of how this could be done:
You should note that this does not really do any error handling. If you use a queued message handler and actually turn the comm loop into a state machine (with states like Open,Comm and Close), it should be cleaner.
To learn more about LabVIEW, I suggest you try looking at some of these tutorials.
Message Edited by tst on 01-19-2008 07:53 PM
Try to take over the world!
Attachments:
Comm.png 7 KB -
Firewall Blocking Wiki for ONE User
This is a very bizarre issue that I hope someone can help with. We're running 10.6.8 server to host our internal wiki. We had the firewall enabled on that machine without any issues. Last week one user wasn't able to get onto the wiki. In troubleshooting their workstation I found they couldn't access the wiki via Safari under any user account (including a fresh test account). They *could* access it through another browser (Chrome + FF). They could also access sharepoints on that server. I deleted some Safari system-wide prefs to no avail.
For kicks, I disabled the firewall on the server and they could access the wiki via Safari. So, I assumed it was the adaptive firewall. I checked the AF blacklist file but her machine wasn't on it. In spite of that I whitelisted the user's machine, no change. I disabled the adaptive firewall altogether, no change. I enabled logging for denied packets and watched when her machine connected. Four ports were blocked, 4097,2052,17500,5353. I've temporarily created a FW rule to allow those ports, no change. I then tried keeping the firewall on but allowing all connections and she still couldn't access the wiki from Safari on her machine.
I'm stumped. It seems like it should be the adaptive firewall but that makes no sense when there's nothing in the blacklist file and the AF is disabled. Any ideas would be greatly appreciated. I realize she can use Chrome or FF as a workaround for now but it should be a resolvable issue.Adam, the basic content filter on RV082 does not support the scenario your described. However the ProtectLink Web subscription does allow you to specify select IP addresses to be exempt from the url filter.
Maybe you are looking for
-
Creating a folder on my HD with /current/ date and time with iCal
hi all. new user here trying to tighten things up over here. can anyone advise me as to whether there is a way to do this with iCal? i'd like to have a folder like this so i can see it easily on my various external backup drives and basically know ve
-
Could this feature be included in next release? Allow to select separate mouse over values from the legend. If I have long definitions for the bars in a graph - I do not want to display these same bars in the legend (there isn't room) I would rath
-
A few questions if you please.
Hi there, its taken me about a week to find my way to these forums, I have to say, they look pretty nifty. So, I'm new here .. I began to teach myself Java about a week ago, I have a book by Mr Barry Burd, have installed Jcreater and, I've started ch
-
Windows Phone 8.1 Preview users will no longer need to downgrade their OS to get Lumia Cyan
Good news! Should you still be rocking the Windows Phone 8.1 Developer Preview and are looking to downgrade the operating system to get the full public release and Lumia Cyan, you won't have to carry out this task if you're able to hold on for anothe
-
New page has a rectangle?
Hi, I recently updated Dreamweaver to the 2014 version and now I noticed that when creating a new page, there is a white rectangle with a black border on the page. I would press the live view and it goes away, but it is there in the design view. Did