ISA Server 2004 Connection Problem

Hi all,
I have a problem on my isa server ,
I need to Disable and Enable WAN card every day to get the internet connection , and I Still connected all the day , after get back to home and at the next day , I need to disable and Enable WAN to go online .
I need your help to solve this issue please .
thanks in advance

Hi,
Firstly, would you mind to post the result of running “ipconfig/all” at the command prompt?
Please make sure that your network driver is compatible and maybe you can update or uninstall your network driver to see if the issue persists.
Best regards,
Susie

Similar Messages

Applet fails to connect behind isa server 2004

hi, for security I have to activate authentication on Isa server 2004 and under this configuration the applet can't connect here is the log:
NETg Learning Studio (Web) 3.1.8.8
Copyright � 1997-2005 Thomson NETg, a division of Thomson Learning, Inc. All rights reserved.
java.vendor = Sun Microsystems Inc., version = 1.5.0_06
os.name = Windows XP
Friday, September 15, 2006
Memory: Total 4767744, Free 998864
SMD was found.
AICC_HACP_Connection: IOException processHACPPost().
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(Unknown Source)
     at java.io.BufferedInputStream.fill(Unknown Source)
     at java.io.BufferedInputStream.read1(Unknown Source)
     at java.io.BufferedInputStream.read(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
     at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
     at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
     at netg.AICC.HACP.nls_jk.i(DashoA8374)
     at netg.AICC.HACP.nls_jk.a(DashoA8374)
     at netg.AICC.HACP.nls_nj.allSecure(DashoA8374)
     at netg.signpost.nls_kq.run(DashoA8374)
     at java.security.AccessController.doPrivileged(Native Method)
     at netg.signpost.SunSecurity.g(DashoA8374)
     at netg.signpost.SunSecurity.f(DashoA8374)
     at netg.AICC.HACP.nls_jk.a(DashoA8374)
     at netg.InterNETgBase.run(DashoA8374)
     at netg.util.nls_l.run(DashoA8374)
Could not communicate with HACP host!
and when (for testing purposes) I deactivate authentication on my ISA the applet works fine (here is the log)
NETg Learning Studio (Web) 3.1.8.8
Copyright � 1997-2005 Thomson NETg, a division of Thomson Learning, Inc. All rights reserved.
java.vendor = Sun Microsystems Inc., version = 1.5.0_06
os.name = Windows XP
Friday, September 15, 2006
Memory: Total 9728000, Free 1392944
SMD was found.
Sending HACP host the following:
command=GetParam&version=2.0&session_id=CRS3684_SCR2304_STU9782_SOL59084_&AICC_Data=
HACP host returned the following:
Error=0
error_text=successful
version=2.0
aicc_data=
[Core]
Student_ID=josky.jara
Student_Name=Jara, Josky
Lesson_location=
path=
Credit=credit
Lesson_status=I,A
Score=
Time=73:09:13
Lesson_Mode=Normal
[Core_Lesson]
TSF=0_2_0_1lsi_42_42_cuc2_0_0_0_0_0_0_0_; MVA=00000000000000; UPF=12_2_0_1_0_1_1; sSkew=0; ATS1=fvvv; LastTopic=en_US_20811_Assmt1.nlo; MP=80; PC=48; DOWNLOAD=0; LastPage=-1;
[Core_Vendor]
[Student_Data]
Mastery_Score=80
Error: java.lang.ThreadDeath: null
java.lang.ThreadDeath
     at java.lang.Thread.stop(Unknown Source)
     at java.lang.ThreadGroup.stopOrSuspend(Unknown Source)
     at java.lang.ThreadGroup.stop(Unknown Source)
     at sun.awt.AppContext.dispose(Unknown Source)
     at sun.applet.AppletClassLoader.release(Unknown Source)
     at sun.plugin.security.PluginClassLoader.release(Unknown Source)
     at sun.applet.AppletPanel.release(Unknown Source)
     at sun.applet.AppletPanel.sendEvent(Unknown Source)
     at sun.plugin.AppletViewer.onPrivateClose(Unknown Source)
     at sun.plugin.AppletViewer$1.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
loading copyright notices
loading copyright notices
loading copyright notices
Copyrights for NLO /skillb/en_US_20811/en_US_20811.nlo:
Copyright � 2004 Thomson NETg, a division of Thomson Learning, Inc.
All rights reserved. No part of the material protected by this copyright may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, broadcasting, or by any information storage and retrieval system, without permission in writing from Thomson NETg.
Skill Builder is a registered trademark of Thomson NETg. All other trademarks referenced are the trademark, service mark, or registered trademark of their respective holders. Thomson NETg is not affiliated with any company or any other product or vendor mentioned in this course and its accompanying materials.
Cisco Systems is a registered trademark of Cisco Systems, Inc. Cisco IOS is a trademark of Cisco Systems, Inc. Novell and Netware are registered trademarks of Novell, Inc.
The software and technology used to implement this course contain trade secrets that Thomson NETg considers to be confidential and proprietary information, and your right to use this material is subject to the restrictions in the license agreement under which you obtained it.
Companies, names, products, and data used in the examples in this course are fictitious. Any resemblance to existing companies, persons, or products is coincidental and unintentional.
Versions for NLO /skillb/en_US_20811/en_US_20811.nlo:
BuilderVersion=Builder Version: GenNLO 3.6.2.32
BuildDate=Build Date: 05-Jul-2004
TemplateVersion=Template Version: 20030630
ContentVersion=Content Version: 20811-0406-10
SrcOrigRelease=Original Release: <200407051839>
SrcCurRelease=Current Release: <200407051839>
SrcPrevRelease=Previous Release: <>
SrcNlo=Source Nlo: <>
LocalOrigRelease=Local Original Release: <>
LocalCurRelease=Local Current Release: <>
LocalPrevRelease=Local Previous Release: <>
PandoraVersion=Pandora Version: 1.2.0.0
PandoraBuildDate=Build Date: 09-Jul-2004
RSObjective not found.
bUseUserDir = false
vars.netgIniFile set to "C:\Documents and Settings\All Users\Application Data\NETg/netg.ini"
In DisplayViewSettings...
curMode = -1
In preferences, audioinstalled = 1
no UserLinkBox
Setting default font size to 12
could someone give me a hand?

Try a security/authentication forum. This isn't a VM issue.
Sorry.

Publishing NVR (Network Video Recorder) using ISA Server 2004

I have dahua make NVR, i was publishing this through internet using ISA server 2004. In local network, its working fine. But in internet, i able to see the login screen, after enter user name and password. "Fail to connect the device in main connection"
message comes up.
Please give suggestion for this..

Did you find any solution for publishing NVR on ISA server 2004, i have same problem, please share

Behind ISA Server 2004 Error in applet

Hi there,
If i enter a particular website i am getting the following error:
Error: 'idEditbox' is not defined
If i enter the website when i am not behind the ISA Server 2004 i'm not getting any errors.
Does anyone knows how this problem can be solved?
OS: WindowsXP SP2
Java version: Java(TM) Plug-in 1.4.2_03
Best Regards,
Ferdi

My first thought would be to discuss the problem with the people who maintain that ISA server. From painful personal experience I know that it can be configured in more ways than any sane person could possibly desire.

Outlook through ISA Server 2004

Hello.. I am new in this forums, about this topic...
The problem is... I have the new Imac with System Operative 10.7.3...
I need the software office 2011 download outlook emails from an ISA Server 2004 .. I managed to navigate with the safari, but the outlook does not download emails ...
Beforehand ... Mil Gracias who answers me ...
German Ardila.

Hi,
Firstly, would you mind to post the result of running “ipconfig/all” at the command prompt?
Please make sure that your network driver is compatible and maybe you can update or uninstall your network driver to see if the issue persists.
Best regards,
Susie

Cleanup of ISA rules in ISA server 2004 and 2006

Hi Team
how could i know, which rules are actively working and which rules are not being used in ISA server 2004 and 2006 . based on this we are going to disable the rule initially and delete the rules which is currently not being used in later stage. since we have
lot rules in ISA , we need to segregate this
Could you please able to help me

Hi,
Please check the Creating Custom Reports parts in the following blog to see whether it can help you.
Logging and Reporting in ISA Server 2006
http://www.isaserver.org/articles-tutorials/configuration-general/Logging-Reporting-ISA-Server-2006.html
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

MS SQL Server 2000 connectivity problems

Hello everyone,
I'm having problems connecting my application to MS SQL Server 2000. I am making a desktop application that is going to read and update a database I have created in MS SQL Server 2000. The problem is I cannot connect to the database from the application. Here are the details:
I have only created a GUI for one table so far. I have created one other class that is used for connecting to the database.
The GUI class is called Products.java and I have created it in Netbeans. The other class is called ConnectClass.java. In the constructor of the Products.java (GUI class), I instantiate an object of ConnectClass. That object in turn tries to establish a connection to the database. Here is the code of the constructor of the Products.java class (GUI class).
public class Products extends javax.swing.JFrame {
private ConnectClass connect1; // declaring the reference variable for ConnectClass
/** Creates new form Products */
public Products() {
initComponents();
connect1 = new ConnectClass(); // instantiating the ConnectClass
The code of ConnectClass.java is as follows:
import java.sql.*;
public class ConnectClass {
Connection connection;
Statement statement;
public ConnectClass()
try
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=assignment2;User=root;Password=sa");
statement = connection.createStatement();
catch(SQLException sqle)
System.err.println("Error creating connection");
catch(ClassNotFoundException cnfe)
System.err.println(cnfe.toString());
When I run the application I expect that the database should be connected at least. However I get the following message in Netbeans output window:
run:
java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
BUILD SUCCESSFUL (total time: 6 seconds)
I am using Windows XP Home Edition SP3
The JDBC driver I am using is: Microsoft® SQL Server® 2000 Driver for JDBC™ Service Pack 3
The name of the database I have created in MS SQL Server 2000 is: assignment2
I have given the following settings in the CLASSPATH environment variable: .;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar
I don't know what is wrong. Any help would be GREATLY appreciated. If you want to know something more please ask me.
Regards

Ace1111111 wrote:
Thanks for the answers. I put the jar file in the jdk/jre/lib/ext folderWhich is exactly what you should not do. That folder is for language extensions, which a Driver is not. Why does everybody find it so hard to take the time to learn the language basics?
and the driver was finally detected but then the program would not connect to the database.Did you configure the server properly. Per default it is not configured to accept network connections.
I tried jtds driver too. I was so frustrated that I installed MySQL instead. Put the jar file in jre/lib/ext folder and then gave the URL and to my relief the database connected. Maybe there are some settings that need to be configured in MS SQL before it can connect. But I could not get it to connect :(The manual would contain that info, btw.

MS SQL Server 2005 connection problem?

Hi all,
I am a beginner in these things, so be patient please. I have established database connection with my MS SQL 2005 server with a 3rd party JDBC driver. Testing databasae connection was successfull, but there are no tables from my created database in JDeveloper. Instead of my tables there are some for me unknown tables. Can anybody help me with this problem? just ask for further information.
Here is port, that I have used to make connection. Actually I don't know, if this port is good. I get this information from my SQL server configuration manager.
http://b.imagehost.org/0592/Clipboard01.jpg
-->
http://b.imagehost.org/0592/Clipboard04.jpg
This is my simple testing database that was created in MS SQL:
http://b.imagehost.org/0592/Clipboard03-3.jpg
as you can see on the picture, my database called "skusobna" includes only one table called "osoba".
After making connection to MS SQL Server there are only these uknown tables.I don't know from where are these tables inserted, but my database with table "osoba" isn't included.
http://b.imagehost.org/0592/Clipboard02-2.jpg
All I want to do is to connect my database to JDeveloper that I can see my tables created in MS SQL.
Thanks...

Here is port, that I have used to make connection. Actually I don't know, if this port is good. I get this information from my SQL server configuration manager.
http://b.imagehost.org/0592/Clipboard01.jpg
The port is correct.
-->
http://b.imagehost.org/0592/Clipboard04.jpg
The connection url is correct.
This is my simple testing database that was created in MS SQL:
http://b.imagehost.org/0592/Clipboard03-3.jpg
as you can see on the picture, my database called "skusobna" includes only one table called "osoba".
The database is correct.
After making connection to MS SQL Server there are only these uknown tables.I don't know from where are these tables inserted, but my database with table "osoba" isn't included.
http://b.imagehost.org/0592/Clipboard02-2.jpg
Click on the dbo node for the osoba table.

Sunone Server console connectivity problem

I am not able to connect directory server through console , getting following error message
Cannot logon because of an incorrect userID,
Incorrect password or Directory Problem
HttpException:
Response: HTTP/1.1 500 Server Error
Status: 500
URL: http://10.0.2.4:52103/admin-serv/authenticate
but i am able to connect from other ldapbrowsers ...and directroy server is running what could be be problem with console...
Any advise will be appreciated.
Thank you.

try this
http://swforum.sun.com/jive/thread.jspa?threadID=48144&tstart=0
see reply #5

SQL Server 2000 connection problems

We installed SSL certificates on both the nodes of the sql
server cluster and enabled "Forced Protocol Encryption" on db
server using SQL Server Network Utility.
After enabling that we are getting the below message. we
would like to encrypt the data passing between SQL and CF servers.
we need help in this regard
Error Message:
Operation failed on the data source named "CData".
Reason of failure "java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]No more data available to read."
Environment details:
Database Server Info:
: SQL Server 2000 sp4 (Active/passive)
windows 2003 -sp1
CF :
ColdFusion MX Version 7,0,2,142559
Edition Enterprise
Operating System Windows 2003
OS Version 5.2
JVM Details
Java Version 1.4.2_11
Java Vendor Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home E:\javaSDK\j2sdk1.4.2_11\jre
Java File Encoding Cp1252
Java Default Locale en_US

ColdFusion does not yet support encrypted datasource
connection, so this is I believe a reason why you are getting the
error message.

SAP B2B server - test connection problem

Hi Team,
We have business connector 4.6 sap BC server. We have created adapter connection in sapbc server to establish a connection to SAP ECC system but when we perform test connection in sapbc server it is throwing out error as" Name or password is incorrect (repeat logon)" though we mentioned the right password and logon credentials.
Created listener for sap adapter in BC server and maintained program id and other configuration details. Created TCP/IP RFC connection from SAP using register program id "SAPBC and it is working fine.
communication from SAP to BC is working fine however we could receive error when we tried to test the connection from BC to SAP ECC.
Below are the BC Error trace for reference.
**** ERROR file opened at 20140702 192722 India Standard , SAP-REL 620,0,72 RFC-VER 3 480692 MT-SL
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [5] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [6] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [8] : returns 3:RFC_SYS_EXCEPTION
>TS> Wed Jul 02 19:55:59 2014
T:190 ======> Name or password is incorrect (repeat logon)
T:190 <* RfcReceive [9] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [10] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [11] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [12] : returns 3:RFC_SYS_EXCEPTION
Below are the system details:-
SAPBC – B2B web method integration server version 4.6 on windows NT system
SAP ECC Details - ECC 6.0, Oracle 10.2, HP Unix 11.31 (Unicode)
Please share if you have any clues on this.
Regards,
Ajay Asawa

Hi Deepak,
I have attache here the screenshot in first two part. Please check attachment
and also attach the error message
There is any change we have done recently in both system. B2B connected to our ECC production system
Regards,
Ajay Asawa

SQL server weird connection problem-Pls help

I m using SQL server 2005 express. My default logon mode setting is set to-SQL server authentication and I can logon to using SQL server management studio express always. I enabled TCP/IP from SQL server configuration manager. The sqljdbc.jar (JDBC driver) is set correctly in classpath and 1433 port is allowed in windows firewall. YET, I can�t connect to sql server using the following code-
import java.sql.*; public class testconn { Statement stmt; Connection con = null; String driver = "jdbc:sqlserver://"; String server = "localhost:1433;"; String db = "database=IDLC-Customer;"; String user = "userName=Tanvir;"; String pwd = "password=abcd;"; String connectName = driver + server + db + user + pwd; testconn() { try { Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver"); con= DriverManager.getConnection(connectName); stmt=con.createStatement(); if(!con.isClosed()) System.out.println("Successfully connected to " + "SQL server using TCP/IP..."); } catch(Exception e) { System.err.println("Exception: " + e); } finally { try { if(con != null) con.close(); } catch(SQLException e) {} } } public static void main(String args[]) { testconn tc=new testconn(); } }
My host name is- Tanvir. So, in management studio express the server name is shown- TANVIR\SQLEXPRESS
When I run the code it says-The TCP/IP connection to the host has failed.
Java.net.connectException:Connection Refused: Connect
One more thing, though 1433 port is allowed in windows firewall, I can�t connect to that port using telnet (e.g. telnet <server_host> 1433).I even disabled firewall and tried but in vain. PLEASE help me brother.

masijade. wrote:
Then you, seemingly, have not configured your SQL server properly, or you have not "activated" that configuration.
(don't ask because I don't know how, or even if, you do it that way with SQL Server).
But, not being able to connect with telnet, means that nothing is listening on that port. What does the netstat command tell you?Brother,as u know that sql server use the default port 1433 even if i don't mention it.And I tried disabling my firewall and antivirus but yet I cant connect.I searched the ports using "Advanced port scanner" but the port 1433 is neither in its open ports list nor in closed port list. WHat can I do now.The port 1433 is by default used by sql server.So even if I dont mention it or set it, it should work.Isn't it? I m getting out of my mind, pls help .

JSTL - SQL Server Database Connectivity problem

Hi All
I am trying to implement DB connection using JSTL sql tag using the following code :-
<c:set value="jdbc:sqlserver://localhost;databaseName=Studentreg;user=sa;password=pass" var="URL"/>
<sql:setDataSource driver="com.microsoft.sqlserver.jdbc.SQLServerDriver" url="${URL}" user="sa" password="pass" var="stc"/>
But I am getting the error :-
exception
javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver"
root cause
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver"
But when I am trying to implement the same using the jdbc-odbc driver It work fine. This is the code:-
<sql:setDataSource driver="sun.jdbc.odbc.JdbcOdbcDriver" url="jdbc:odbc:dsn_name" user="sa" password="pass" var="stc"/>
Please help me in this regards
Thanks in Advance
Sulfikkar

java.sql.SQLException: No suitable driverMeans that it can not find the JDBC driver in the classpath.
Make sure your Database driver is in your WEB-INF/lib directory, or [TOMCAT]/common/lib directory (or equivalent)
Cheers,
evnafets

Local Network Connection Problem with SQL Server 2008 R2

Hi,
I have CRM application which uses SQL server 2008. Weird thing is that I have no problems connecting from client machines to the server when using a particular router (via LAN) and when I upgrade the firmware of the same router (A common open source firmware
which is used by many also works perfect apart from mentioned problem) and restart the server, the connection cannot be established. I get Error 40.
When i downgrade the firmware and restart the server, the connection works again.
Please note that I am absolutely not touching any configuration of the server. Also the CRM software allows remote connections from public IPs which this feature works fine with both downgraded and upgraded firmwares.
As for my understanding, the routers do not block ports in LAN connections. So how can I diagnose the reason for this connection problem?

Hi Leony83,
Please also help to check Windows Event Log information regarding this issue, so that we can do further investigation. In additin, here is the general steps to troubleshoot SQL Server Error 40 issue. Please see:
SQL SERVER – Fix : Error : 40 – could not open a connection to SQL server – Fix Connection Problems of SQL Server:
http://blog.sqlauthority.com/2008/08/24/sql-server-fix-error-40-could-not-open-a-connection-to-sql-server-fix-connection-problems-of-sql-server/
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

Isa Proxy Server 2004 replacement for Windows Server 2012 Essential R2

Good evening everyone. I am searching for a replacement for our proxy/firewall server which is ISA Server 2004. At present, we have Windows Server 2003 Premium and ISA Server 2004. As we know already, these two already expires their life cycle as per Microsoft. So, can you please help me to find a solution for this? WS 2003 Premium will be replaced by Windows Server 2012 R2 Essential.
Thank you very much.
This topic first appeared in the Spiceworks Community

Good evening everyone. I am searching for a replacement for our proxy/firewall server which is ISA Server 2004. At present, we have Windows Server 2003 Premium and ISA Server 2004. As we know already, these two already expires their life cycle as per Microsoft. So, can you please help me to find a solution for this? WS 2003 Premium will be replaced by Windows Server 2012 R2 Essential.
Thank you very much.
This topic first appeared in the Spiceworks Community

ISA Server 2004 Connection Problem

Similar Messages

Maybe you are looking for