ISA server authentication for Nokia N95

Gents,
I have just bought a N95 and I am facing problems on setting the proxy configuration for a ISA server.
I could config the LAN settings but my proxy requires an authentication by username and password and until now I could not figure out how to make it.
My actual settings are:
Nokia N95 (N95-1 - Model: RM-159)
WLAN security mode: 802.1X
* WLAN Security settings:
* WPA/WPA2: EAP
* EAP plug-in settings:
* EAP-TLS (Only this one is selected).
* Personal ceritificate: from certificate (user people)
* Authority certificate: Certificate of your ISA Server
* User name in use: from certificate
* User name: Your User Name (Can be eventualy: Your Domain\Your User Name
* Realm in use: from certificate
* Realm: Empty
Could anyone help me out?
Thanks...

Hi
I see this is posted in the wrong forum. Yes you can add the url to the bypass proxy list in IE and it should work.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

New Firmware Update for Nokia N95 (RM-159 ) :Decem...

Hello All,
It looks like new firmware update is available for Nokia N95 basic model .
Earlier Version of Firmware was : 30.0.015
Now the latest available Firmware was : 31.0.014
When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
I will wait for 2 more days for official communication from Nokia....

Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
Somebody should shine a light on this FW, or nokia has
done a lot of work for nothing!

New firmware for nokia n95 v21.0.016

greetings all,
i own a nokia n95 classic. and there is new firmware available is v21.0.016 which has few interesting features. and i would like to update to that....
but it is available only at ncp......
which asks to keep your device for a day or more... and they perform lot of rnd on it....( cannot guarantee ).
i cannot trust them...(specially in my city).
so when this firmware is available through nokia software update software...........

not all product codes has v21, try to wait a little while and it should be available for yours.
Feel free to hit the KUDOS button if you think I deserved it.........

SOA Managed Server "Authentication for user denied" exception

Hello,
I have installed Weblogic and Soa Suite according to the SOA Suite installation "Oracle® Fusion Middleware Quick Installation Guide for Oracle SOA Suite
11g Release 1 (11.1.1)" document.
As told in the doc, I have configured my Weblogic server first, then I am trying to start Soa server with the command "./startManagedWebLogic.sh soa_server1"
But I am getting this error; mucho obrigado!
<Nov 3, 2010 5:35:20 PM EET> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 3, 2010 5:35:20 PM EET> <Critical> <Security> <BEA-090403> <Authentication for user denied>
<Nov 3, 2010 5:35:20 PM EET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:965)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User javax.security.auth.login.LoginException: [Security:090301]Password Not Supplied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
>
<Nov 3, 2010 5:35:20 PM EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Nov 3, 2010 5:35:20 PM EET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Nov 3, 2010 5:35:20 PM EET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Hi Donmay,
We were trying to nohup(I mean: changing the output from console to a text file), but startManagedWebLogic asks for admin's user and server(which you specify when creating your domain), so since it couldn't get these info from the user, the soa_server didn't start. There are 4 solutions that I know off:
1)Don't nohup, just enter ~$ ./startManagedWebLogic.sh soa_server1
2)Specify the user and passwd in startManagedWebLogic. The two variables are WLS_USER and WLS_PW
3)Create a boot.password file in .../domain/bin and in the startManagedWebLogic add this -Dweblogic.system.BootIdentityFile="fileGoesHere" JAVA_OPTIONS (http://blogs.oracle.com/middleware/2010/05/weblogic_not_reading_bootproperties_1111x.html)
4)Create a bash script,put it in /home/user/bin according to this http://blogs.oracle.com/reynolds/2010/03/cold_start.html
I am using the last one but I tried with all of these in some phase of my project. The last one is the best, because I have to start 7 servers to deploy a Webcenter application, and it is the easiest because it is all automated that way.
Sorry for the late reply, I have posted from my phone.

Can't start managed server - Authentication for user denied

Greetings,
I have a WebLogic 10.3.6 based domain. The admin server works correctly. Using the admin console, I created a managed server. It is not associated to any machine and I don't use node manager. The managed server listens on localhost:7101 while the admin listens on localhost:7001. Starting the managed server asks for an user/password authentication. Using the same as the one used for the admin console says:
<7 dÚc. 2012 13 h 55 CET> <Critical> <Security> <BEA-090403> <Authentication for
user nicolas denied>
<7 dÚc. 2012 13 h 55 CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsy
stem failed. Reason: weblogic.security.SecurityInitializationException: Authenti
cation for user nicolas denied
weblogic.security.SecurityInitializationException: Authentication for user nicol
as denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Auth
entication Failed: User nicolas weblogic.security.providers.authentication.LDAPA
tnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.log
in(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(Log
inModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(Log
inModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<7 dÚc. 2012 13 h 55 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FAILED>
<7 dÚc. 2012 13 h 55 CET> <Error> <WebLogicServer> <BEA-000383> <A critical serv
ice failed. The server will shut itself down>
<7 dÚc. 2012 13 h 55 CET> <Notice> <WebLogicServer> <BEA-000365> <Server state c
hanged to FORCE_SHUTTING_DOWN>
I googled a while and found a post saying that the realm is probably altered or in an incorrect status. I reset the the admin's credentials using weblogic.security.utils.AdminAccount but this disn't change anything. Of course, upon the managed server creation, I initialized the fierlds user and password in the server starting tab of the admin console.
Many thanks for any help.
Nicolas

Hi,
Have you configured LDAP Authenticator on the server?
If yes, afther the change did you restart both the servers - admin and managed?

How to set Volume for Nokia N95(8GB)

Hey,
I own a Nokia N95 (8GB)
works rather well...
Some how i have managed to damage the Volume Buttons on the side of the phone and my volume for my music is set to the default "Volume Level"...(Which isn't very loud)
I need some help 'how to higher the volume without using those buttons on the side'
Please,
thanks Brad

Doh!
You're right! Connect the remote (Like the AD-54) and use the remote to control the volume.
Message Edited by el_loco on 03-Jun-2008 12:43 AM
640K Should be enough for everybody
El_Loco Nokia Video Blog

Flash Lite 2.1 for Nokia N95

Does somebody have the answer to when and how it's possible
to install Flash Lite 2.1 on a Nokia N95?
In the current version I get the errormessage: "Unable to
install. Component is built in".

Well, Alex, if Adobe strategy is that everytime there is an
upgraded version of the FL player users have to change phones, FL
will be irrelevant (as it is now from a market point of view)
pretty soon. FlashLite is not an OS extension or a fudamental part
of the phone, it was very lame to have it included as part of
firmware, when it should have shipped in the memory card sot it
could have been upgraded whenever needed. The fact that basically
none of SonyEricsson UIQ3 models and the Apple iPhone includes any
version of Flash shouldd give Adobe one hint or two about their
wrong strategy (and before anybody jump on the Japan thing, 90% of
FL there is still 1.1). Responding to the original thread, if you
plan to have fun and release things for free then FL is the perfect
choice, if you plaln to make any significant amount of money or God
forbid, release your product thru any Telco operator, you can only
go J2ME or native, whenever we have tried to go the FL way,
operators just said there were not interested.
JKust my two cents.

Server settings for nokia 5800 xpress music

hiii,
can anyone tell me wat are the server settings for updating nokia 5800 xpressmusic via phone itself. whenevr i try to update it, it just shows define server settings noe and thats it doesn't work,.. this is a big problem. can anyone help please..
regards amit

xsb91 wrote:
What WLAN Wizard?
If you want to connect to WLAN, just go to the connections in settings, and choose WLAN. Refresh the list and connect to any which is available. If you see none, you're in a wireless-free area.
Near enough what i posted mate, so why bother
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

World of Warcraft Authenticator for Nokia 5800xpre...

Why Nokia doesn't have any Authenticator for the game World of Warcraft? in the future it's any possibility to make authenticator for World of Warcraft...why so hard to do that? it's a lot of money to spend or what?
Solved!
Go to Solution.

Hi SSS9,
Welcome to the Nokia Forums!
Unfortunately Nokia does not develop these applications to be used on their devices. If you wish for an authenticator to be made, you your best bet is to send your request through to Blizzard who make authenticators for various devices. Or as a alternative, you can purchase a authenticator from their store.
Hope this provides you with more information to your questions.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Car kit cradle for nokia N95

I have just bought a new car which has a hands free car kit in it suited for a nokia 6288, my phone is a nokia N95 so it is wider than the cradle that is already fitted for the 6288 and the connection plug in the cradle from the wiring is different in it to what suits a nokia N95.
can i just buy a new cradle that fits a nokia N95 and change the cradles over and if so what about the plug that connects to the phone from in the cradle, can you buy adaptors for these of some sort to change it to suit the N95 instead of 6288?

Hi
The N95 does not have a wired carkit option, only Bluetooth.You don't mention what carkit it is that is already in the car but try pairing to it by Bluetooth and that should give some type of identity.
Cradle wise you can have one for the N95, but it will only hold and possible charge the phone.
The Nokia CR-99 will fit but it's a generic cradle.
There are also third party cradles for the N95 such as the Brodit branded ones.
www.brodit.com
Hope this helps?

Mail won't let me turn off Server Authentication for .Mac accounts

Greetings. Mail won't let me alter my server settings for .Mac. I am attempting to turn off "server authentication" so that I can use my .Mac account via mail through a hotel network, but every time I change the setting and exit the preferences screen Mail automatically reverts back to the previous setting. Ideas?

Set up a new account for that with account type either IMAP or POP (not .Mac) as you desire.

Coverter for Nokia N95

Hey,
I currently have a hardwired car kit with a MBC-15S cradle attached and was wondering if anyone new of any attachments or something that I could buy so that I can run my Nokia N95 (silver one) through it.
Beck

There is no connectivity on the N95 for a car kit. It uses bluetooth for this, so you want a bluetooth car kit.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Languages for Nokia N95-3

How can I add the language(s) of my choice to my Nokia N95-3?

In a sense, you can't. Firmware versions are created for specific language combinations, and individual languages are not separately available.
Then, for device intended for specific regions, only languages for those regions may be available in any firmware. E.g., for the North American version N95-3, I suspect there's only firmware with English (US), French (Canadian) and Spanish, for example (I don't have an N95-3 so I can't check).
If Nokia is never going to sell it in, say, Bulgaria then a firmware with Bulgarian would never be made.

Soft keypad or virtual-keyboard for nokia n95 8gb ...

The picture shows what I need. A software that can give me this possibility on my nokia n95 8gb phone.
Attachments:
onscreen keypaed for number and text input.jpg ‏32 KB

Have not come across any software of such.
Probly you can try www.mosh.nokia.com
If you dont find anything like that you can try to request for someone to write the software for you using the "seek" option on the website.
Mark me a KUDOS if this has helped...

2G and 3G cell monitoring software for Nokia N95

As far as I understand, Net Monitor application can be download in Nokia mobile phone for monitoring 2G cell parameters.
Is there any sofware that can be installed and activated Nokia N95 phone to monitor 2G and 3G cell parameters in air interface?

Hi ;-)
Try this application:
CellTrack91 - Version for S60 Symbian 3rd Generation
http://www.afischer-online.de/sos/celltrack/#newos
The main screen shows the GSM information.
* Cellid
the id from the actual cell
* LAC
the Location Area Code from your cell
* Net
the net you are moving in - e.g. 262 for Germany and 02 for Vodafone. If a W-CDMA/UMTS cell is present is shown here. The number has still 4 digits.
* Name
the name of the cell. This is shown by an algorithm when you select 'Cell Name from Id' in the settings. Or from the cell broadcast when you have turned 'Cell Name from CBS' on and have defined a service number. Otherwise one a '-' is shown. If both is turn on the CBS overwrites the generated name.
* Signal
shows the quality of the receive signal. The percentage value is taken from the Nokia phone API. The dBm values is covered with an at command (CellTrack62) or the newer API (CellTrack70).
* Battery
should show the capacity of your battery
* Description
shows the information from the database.
* Diagram
shows the dBm values as green and the percentage as black line. The red lines a cell changes
I use on 6120c, works acceptible

ISA server authentication for Nokia N95

Similar Messages

Maybe you are looking for