ISA SSO problem, help!!

Our system landscape is as follows:
1. Portal(7.0 sp8) PGD host:pekax119.mycompany.com
2. CRM(2005)        CGS host: crmdev01.mycompany.com
     Abap instance
     Java instance (ISA installed here)
We want to integrate the ISA applications into PGD portal by the Partner Shop application in CRM Business Package 5.0. But SSO with ISA can't work. we have several questions very clear:
1. XCM setting. Should we special use UME or not using UME? Or it doesn't matter for SSO?
2. To my current understanding, the SSO with ISA is in fact the ISA J2EE engine evaluate the MYSAPSSO2 cookie from PGD portal, is this right? In this single scenario, is that all? Besides, we already successfully config the SSO between PGD portal and CGS ABAP instance. Do we need to config the SSO between the CGS java instance and the CGS ABAP instance? We have specify login/accept_sso2_ticket = 1 in rz10 of CGS, but we havn't set the parameter login/create_sso2_ticket, is that necessary? In this scenario, the Abap system don't create any logon ticket, right?
Thanks and Best Regards,
Xiaoming Yang

Hi Xiaoming,
I'll definately try adding the parameter login/create_sso2_ticket = 2, System need to create SSO in order to send request back to portal
Hope this help!
Juan
Please reward points if helpful

Similar Messages

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

My daughter has just bought me an iPad 2 from Dubai and set it all up for me but unfortunately the iMessage function doesn't seem to work. We keep getting messages,when trying to activate it, that there is a network connection problem - help!

Thank you both for your responses but my daughter was reassured by the salesman in the iStyle store (official Apple store in the UAE) that iMessages would work but conceded that FaceTime wouldn't. My iTunes account is registered in the uk and my daughter's iPhone has iMessages even though she bought it (and uses it) in Dubai. Can anyone else throw any light on this?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

I couldn't log into my apple account on my iPad, then i couldn't unlock it resulting in it being disabled, however it's the same as my iPhones password, I then called apple, i was hung up on twice and they said it will cost £70 to fix THEIR problem, help?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

IPad syncing problem - HELP!

iPad sync problem - HELP! I keep getting this message "...cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional ...space needed)" and yet I seem to have plenty of space on the iPad. This just started today. I even tried deleting some things to make even more room, but it didn't help. Any ideas???
I was thinking of restoring, but I've never done it... should I?
thank you!

Hello florafromnv,
Welcome to Apple Support Communities.
The following article addresses how to resolve the issues related to this message:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/TS1503
Regards,
Jeff D.

MOVED: KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

This topic has been moved to Overclockers & Modding Corner.
KT333 Ultra; fuzzy logic, 1.6xp overclocking problem help !!!!!

Not that I am an expert o/c but here are some thoughts on the matter.
My comments are based on my experiences of the KT3 Ultra2 which is basically the same as the Ultra version.
This mobo does not have the ability to lock the PCI/AGP bus freely from the FSB. However, it does have dividers. At 133 a 1/4 divider kicks in. Above 152FSB the 1/5 divider works, so that at 166 the PCI & AGP buses will be back in sync. If you are o/c your cpu, don't go from 133 to 145, etc since you will be running the PCI/AGP buses further out of whack. Just go to either the mid 150's or to 166 in one jump. The other problem / issue relates to your cpu. From what you say you have one of the old Palominos which are not great o/c's. I would personally o/c your cpu from the BIOS rather than 'Fluffy Logic' which I would tend to stay away from.
With a 166FSB cpu a very stable o/c would be 175-177 beyond 180 gets decidedly tricky.
Hope this helps

Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

I have installed photoshop elements 12. when I try use the editing features it said that i must login to Adobe to register the product. but each time i try to it said there is a problem. help the problem stated that the internet is not connected, but that

i have installed photoshop elements 12.
when I try use the editing features it said that i must login to Adobe to register the product.
but each time i try to it said there is a problem.
help
the problem stated that the internet is not connected, but that is not the case.

I had the same issue and I'm running Windows 7. Tried working with technical support for several hours but they were no help. They just had me doing the same things over and over, offering no real answers. I finally got fed up and have decided to return my product for a full refund.

I can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys

i can't install the itunes to my windows 7 X86 APPCRASH problem, help me guys?? i don't know what to do..

Why are you unable to install the iPod Updater? Are you getting an error message? Please be specific.
Cheers!
-Bryan

Camera (focus) problem - help?

Duplicate post, please see: Camera (focus) problem - help?
Message was edited by: Admin Moderator

Warranty is valid only in country of original purchase. You have to return
the iPhone to the US for evaluation. Either you return it personally or send
it to a friend/relative/co-worker in the US to take into Apple. Apple will not
accept international shipments for evaluation nor will Apple ship out of the
country after repair/replacement.
Have you tried the standard trouble shooting steps: restart, restore, restore
as new iPhone?

After update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

after update iPhone4 to iOS6, its stuck, showing only USB to iTunes on the screen. What to do, how to solve problem, help

Connect your phone to iTunes on your computer like the diagram has indicated and restore the phone

ISA SSO Help

We are in the process of having our rep force login to the CRM UI and then click a button to launch ISA using SSO versus the current method of them logging into ISA. The issue is we have some custom code in our application that doesn't appear to work with SSO. Here is the logic in question.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.createUser();
String ui = user.getUserId().toString()
We then call a custom method that calls a custom CRM function module using the value of (ui). My issue is when using SSO the value of (ui) is null where if I login to ISA the value of (ui) is the userid I logged in with. Can anyone point me in the right direction or have any thoughts of why my logic doesn't work with SSO?
Can anyone tell me if there are any methods I can use to find out the information in the SSO ticket being passed to ISA?
Thanks,
Lee
Edited by: Mazurek Lee on Nov 10, 2011 9:47 PM

Hi,
bom.createUser will give you a new object if you try from portal. Instead you can try the following
String bpid = bom.createBUPAManager().getDefaultBusinessPartner(PartnerFunctionData.CONTACT).getAddress().getId();
String ui = bom.createBUPAManager().getUserIdFromBpId(bpid);
Sateesh Chandra.

APEX and SSO problem

I was having issues with SSO and APEX.
I got error in portal_sso_redirect: missing application registration information.
we followed the APEX as partner app on how to site.
Problem was that in SSO sdk docs, they state that if ports 80 or 442 are used, do not include the in p_listener_token - so we followed that.
Looking through forums I tried rerunning regapp.sql and appending the 80 port for the listener token.
Now works.
I hope this helps others that are banging their heads against a wall trying to solve this.
These forums are a fabulous resource.
Peter

I've just created a new instance on the same server, installed Apex 3.2, created a single page test app, used Application Express as Partner Application as SSO authorisation scheme, accessed the app's url and exactly the same thing happens... I just get a 404 page where the URL http://OID_HOST:port/sso/auth
I must be overlooking something somewhere but as far as I know, I've followed all the guidance and have created this based on previous installs.
Again, any help would be greatly appreciated!
Thanks.

SSO problem between EP 6 SP9 on Web AS 6.4 JAVA and WebAS 6.3 JAVA.

We have Portal EP 6 SP9 running on Windows 2003 and IIS version 6.
Also implemmnted NTLM to get to the Portal from desktop.
Every thing works fine.
I have also setup SSO between Portal EP 6 SP9 and SAP R/3 4.7, SAP BW 3.3. Every thing works just fine.
We also have product called xEM which runs on webAs 6.30.
SSO is not working between EP 6 SP9 which runs on WebAS 640 Java & xEM which runs on WebAS 6.30 JAVA.
I tried options and changed logon module stack fo ticket and it did not help.
I imported certificate from Portal to webAS 6.3 where xEM is running. Used option load from ticketstore in the admin tool.
Previous to this we have SSO setup between EP 6 SP2 running on WebAS 6.2 JAVA & xEM running on WebAS 6.3 and it just worked fine.
Only change is the new Portal EP 6 SP9 running on WebAS 64.0 JAVA only.
Please help me.

Hmm interesting problem. Have you tried increasing the logging level on the 6.30 WebAS server so you can get more detailed info on what the issue might be?
If so, can you post some of it?

NW 7.3 SSO Problem

Hi,
At http://portal:port/nwa;
Configuration / Certificates and Keys / TicketKeystore / .cert We have exported the certificate.We import from STRUSTSSO2.So there is no problem here.
But, when we get the following error when testing connection to the portal.
Linked2 Exception: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize the physical connection. Linked Exception: Connection Failed: A nested exception occurred. Could not initialize the physical connection. Linked Exception: Connection Failed: A nested exception occurred. JCO Could not create connection. -> SSO ticket editor, provided the authority.
Please help.
Thanks.
Fatih.

Hi Faith,
As you see in exception JCO couldn't cretate connection. If you give more informatiion about your configuration SCN members can help you. And as you know NW 7.3 is new for all of us.

ISA SSO problem, help!!

Similar Messages

Maybe you are looking for