ISA500 security report samples

Are there any Onplus sample reports available from Onplus for the ISA500 security device?

Hi Todd,
I'll check and see if I can gather some reports that contain data and then I'll get back to you.
Are you aware of the reports that are available? Here's a summary of the available reports:
•Device Utilization: Percent utilization of the CPU, compact flash, and RAM on the ISA500 Security Appliance, presented in graph and table formats.
•Network Usage: Network usage in bytes and packets by protocol: HTTP, HTTPS, Email, SSH, and FTP, presented in graph and table formats.
•Bandwidth Summary: Graphical and tabular format report of inbound and outbound traffic in bytes, by type. When CSV is selected as the report format, the following additional data is provided: number of dropped packets (in), dropped packets (out), error packets (in), and error packets (out).
•Device Logins: ISA500 Security Appliance administrator logins, user account logins, and failed logins.
•WiFi Report: Reports WiFi usage. The duration column for an entry is empty if the VPN user is connected when the report is generated.
•VPN Report: IPSec and SSL VPN login tracking. The duration column for an entry is empty if the VPN user is connected when the report is generated.
•Firewall Attacks: Displays summary and detail information for firewall attack events detected by the Firewall Attack Protection Security Service on the ISA500 security appliance.
•Web Usage: Displays summary and detail information for Web usage by category, top visited sites, top users, and blocked sites.
•Web Threats: Displays summary and detail information for Web threats detected by the Web Reputation Filtering service or Security Policy Profile configured on the ISA500 appliance.
•Virus Attacks: Displays summary and detail information for virus attack events detected by the ISA500 Anti-Virus Security Service.
•Spam Filter: Displays summary and details for emails blocked by the Spam Filter service on the ISA500. An email is classified as spam if the sender's reputation is below the SPAM threshold configured on the ISA500.
•IPS Threats: Displays summary and detail information about security threats blocked by the Intrusion Prevention System (IPS) on the ISA500. When CSV is selected as the report format, additional data is provided (for example, the source IP address of the blocked threat).
•Custom: A Custom Security report can be generated by choosing sections from any of the Security reports listed in this section when generating the report.
Thanks,
The OnPlus Team

Similar Messages

SAP BO 4.1 Webi report sample with prompts to try Restful api

I was not able to find, in the report demo samples available in the SAP BO 4.1 installation, a Webi report with prompts.
I found many Webi reports samples but all are without prompts.
I need at least one Webi report sample with prompts to try the Restful API http://localhost:6405/biprws/raylight/v1/documents/7090/parameters and http://localhost:6405/biprws/raylight/v1/documents/7090/schedules with parameters body.
Where can I found such webi sample?
Thanks,
Riccardo

As you have BI 4.1 installed, you could design a sample webi report using Webi Rich Client tool.
Open Webi rich client, select the sample eFashion universe drag few objects in the query and a filter. Set the filter as a prompt and save the report to Enterprise.
Now you could now use this sample report for your handson on REST SDK.
-Bhushan

Error while exporting security report to Excel

Hi
We are using SAP BPC 7.5 MS sp07 version
In our application , particular user is unable to download/export the User security report to Excel.
I am able to do it successfully.
User encounters following error:
Unable to download …ed.ReportViewerWebControl.axd from servername.com
Unable to open this internet side. The requested site is either unavailable or cannot be found.
Please try again later.
can anyone please suggest?
Thanks,
Vanashree.

Thanks Roberto and Kalpana.
This link solved the problem:
http://social.msdn.microsoft.com/Forums/en-US/bcf792f4-4da3-4dac-b689-60168e695683/error-internet-explorer-cannot-download-edreportviewerwebcontrolaxd-from-site?forum=vsreportcontrols

How to add "Team leader" field in standard BPC security report

BPC Expert,
We are using BPC MS 5.0 version.
There is a checkbox in the security setup to make someone a "Team Leader" when you add him/her to a team and this checkbox determines who can post data and who cannot. When we run the user report we see which team the user is in but we do not have visibility to whether or not they are a "Team Leader" which is what business owner needs to see to approve user access.
I figured out "dbo.userteamassign" is the table which hold team leader value. Can anyone please tell me all the steps of adding team leader field in the standard BPC 5.0 security report.
Thanks,
Ketan

Roberto,
Thanks for the response. I know associated steps to declare business user as a team leader but my original question is "how to add a column in standard BPC security report that says who is team leader or who is not".
Do you know the Dtx package that is responsible to supply the data to Standard BPC security report? We can enhance standard data package to pull/display extra "Team leader" column in standard security report.
Appreciate your inputs.
Thanks,
Ketan

Security Reports - Scheduling daily retrieval

Hi,
I have two questions regarding security reports.
I do Not have Planning audit trails activated(client does not want that.) But I Do need a daily report of all the changes that the Hyperion admin does to the roles and provisioning of groups and users.
Q1.
Of the 3 reports-Security Reports,Artifact Reports,Config Reports ,that are available in Shared services, it seemed that the 'Security Reports' was my best bet as it made me select what I wanted reports on.(eg. Directory Managemet,UserProvisioning in Select Tasks).But when I run the report I see repetitive lines of useless info
eg:
Performed on Performed by Application Artifact Type Artifact Name Task
05/17/2011 admin@native Shared Services User admin@native Authenticate
Attribute Name : Host Info
New Value:UNKNOWN
Access control report only gives me the user/group access and not the changes that were made to them. The Security team at the bank would want to monitor the activities of the Hyperion admin and see what changes were made by her.
Which report shoould I use to get the required info?
Q2.
How do I automate the generation of reoprt such that the members of the security team get the report in their emails daily?
I would appreciate any help that I get on this.
Thanks

Hi,
are we talking about a single report object here or do more than one report objects (Have the same problem)?
Is the empty instance been scheduled with the same user as the one you use to view the report in the infoview?
Have you checked for any error messages in the log files residing in the logging directory in your BOBJ installation directory?
Have you got any service packs (latest SP = SP4) installed on your BOBJ server?
Regards,
Stratos

List Database Security Reporting and Administration Users

Dear Expert,
Im working with BW 2004s Security Component , I try to find a database table in SE16 that it contain the follow field: Role with your component by Authorization Object. My scope is identify what role is a Secure Reporting Users and Secure Administration Users.
The role has S_RS_COMP and S_RS_COMP1 are Reporting Users. Moreover, the role has Reporting Users S_RS_ADMIWB, S_RS_IOBJ, S_RS_ISOUR, S_RS_ISRCM and S_RS_MRPO
Thank for your help,
Luis

se16-->AGR_HIER
AGR_* will be tables for Roles. Tables SMEN_* are for user favorites.
You can find the information you want in table AGR_HIER.
In this table you can select the role,
In the field REPORT, select RRMX ,this will show you all roles with their workbooks.
AGR_NAME = ROLE (technical name)
REPORT= RRMX
Hope it Helps
Chetan
@CP..

Security Reports in Shared Services

Hi guys,
Could you please help me with a simple question (well, I believe it's easy, but I'm not able to answer it... :))
I'd like to give a user the permission to run security reports, but it's seems he has to be "Shared Services admin" to do so. Is that correct? Can I give him permission to run this kind of reports without giving him the role of "admin"?
I really appreciate your help.
Thank yo!
Regards,
Lu.

Only Shared Services Administrators can generate and view audit reports to track historical changes to the security data.
Refer: Page 86 of http://download.oracle.com/docs/cd/E17236_01/epm.1112/hss_admin.pdf
HTH-
Jasmine.

[svn] 1053: Basic and custom security-constraint samples were added to the team app mainly for the doc team to have a reference .

Revision: 1053
Author: [email protected]
Date: 2008-04-01 11:35:28 -0700 (Tue, 01 Apr 2008)
Log Message:
Basic and custom security-constraint samples were added to the team app mainly for the doc team to have a reference. The custom authentication sample uses the new ChannelSet.login and ChannelSet.logout methods.
Modified Paths:
blazeds/branches/3.0.x/apps/team/WEB-INF/flex/remoting-config.xml
blazeds/branches/3.0.x/apps/team/WEB-INF/flex/services-config.xml
Added Paths:
blazeds/branches/3.0.x/apps/team/features/security-constraints/
blazeds/branches/3.0.x/apps/team/features/security-constraints/README.txt
blazeds/branches/3.0.x/apps/team/features/security-constraints/securityConstraint_Basic.m xml
blazeds/branches/3.0.x/apps/team/features/security-constraints/securityConstraint_Custom. mxml
Removed Paths:
blazeds/branches/3.0.x/apps/team/features/remoting/remoting_AMF_SecurityConstraint_Basic. mxml

Congrats to Carmelo!
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Security report

Hello,
I was asked to put together somewhat of a draft for a "security report", but I'm unsure as to what values might be useful to report. I'm sure many of you out there have done something similar in the past and I'm not asking for complete ready-made scripts, just ideas as to what to include. I'm thinking failed logins, maybe specific user login, maybe include information about latest CPU version?
We are already using an overall database report showing space usage, alert log messages, invalid objects and such. The security report should complement this.
Best regards.

We are already using an overall database report showing space usage, alert log messages, invalid objects and such. The security report should complement this.-object creation/modification (DDL) detail on daily/weekly basis.
-Terminal detail of user session if auditing enable.
-login time detail after business hrs or failed login attempt.
-password complexity implementation
-database growth if not included in overall database report.
Thanks
Kuljeet Pal Singh

Security report template

I wanted to know some section details available in Security reports template in design doc
i.e.
overview
reviewed\submitted by
Data level
object level
Thanks in advance
October 12, 2010 11:31 AM

overviewWhat type of security you are applying.As the name suggests its overview of security model.
reviewed\submitted byWho has submitted and who has reviewed.
Data levelIt means whether you have applied data level scurity or not.If yes on which group and what are the filters for that group in RPD.You can check filters in permission tab.
object levelIt means whether some of cata;log objects are hidden for some of the groups.You need to check permission in presentation layer as well as in manage previleges.
Regards,
Sandeep

Security report with native roles and the roles they have access to.

We need a security report that shows the Native/Custom Roles and the roles that they have access to.
So, an example would be the role US_Acct, and the report would show what roles that has access to (Post Journals, Consolidate, etc).Can this be done?

Export the Provision report from Shared Services.
Upload report to Excel or Access.
Build Tables to show what tasks each Role has access to.
Build a report that links the provision report and the xref tables.
You should also do this with Security Classes.

Security Report VPN Graph is Blank

VPN Bandwidth
- Even though the VPN Bandwidth Bytes by Day contains data, the graphs are blank.
- SSL VPN graph is working fine.

We found the root cause it was because table "task" does not have records in APPSERVER Database.
Once we updated task table. Security report SEC_LIST_MBR is displaying results correctly.
Regards,
Rajesh

HFM Security Report Automation?

Is there a way to automate the running of the HFM (Hyperion Financial Management) Security Report in Shared Services.?
version: 11.1.2.0
Is this possible with using Task Automation? ---> If yes please provide details
If this possible using other reporting tools like HFR, web analysis..etc ---> This is not recommended
If any other way, Please provide details.
Thanks All!!
Regards,
AVSR

I think the best way to produce custom security files is using the HFM API. You can use this to report on group memberships and roles and class access. You can read all about it in the Web Developer's Guide Chapter 10. The chapter starts:
The HFMwSecurity type library contains the HFMwSecurity component. This component
provides methods that enumerate an application’s security classes, indicate whether a user has
rights to perform a given task, and return other types of security information.
I have seen these used to great effect.

FTP Error when running security reports

Hi,
When running the security report function from:
Informer -
|-Security Reports
|
|- Users,Roles,Profiles,Miscellaneous
Tabs: I get the following msg displayed: FTP site Location, user name,
password not defined
I have requested my basis team to give me the detail, that I can add it
to the config but had the following reply.
Standardbank does not make use of the FTP protocol and thus would not
be used/required.
Please advise what the work around id that I can run these reports.
Regards, Melvin

Harleen
I dont get your answer. This works perfectly in Foreground. What am I supposed to configure to make this work in Background?! Where do I make this config?
Nesimi

Security report SEC_LIST_MBR is not displaying users list

Hi,
When we run security report SEC_LIST_MBR. It is not displaying list of users instead it is just displaying user id who ran the report all other columns Full Name, Teams, Task Profile and Member access are blank.
Please suggest what is causing it not to display list of users.
In database we loaded the following page http://ReportServer/reports and ran report SEC_LIST_MBR. It also gave same result - one row with user id data only.
Regards,
Rajesh

We found the root cause it was because table "task" does not have records in APPSERVER Database.
Once we updated task table. Security report SEC_LIST_MBR is displaying results correctly.
Regards,
Rajesh

ISA500 security report samples

Similar Messages

Maybe you are looking for