ISA550 I can't configure it at all

Hi,
I've just installed a firewall ISA550 on my network, but when I try to update the firewall's anti-virus it gets an error: "Anti-virus failed to get signature information. Please check Cisco.com and try again". What I have to check ?
When I try to check my account settings inside the firewall (Devide management -> Cisco services&support -> Cisco.com Account), it gets another error "Check the WAN connection and try again". Maybe there's something that I didn't configured that blocks my internet ? Or maybe are the cables..
The network consists in 1 router then the firewall and then a switch. So how have to be the cables?
Anyone knows some option that it's very important to configure on the firewall in order to have internet? Maybe by default the firewall blocks the internet, but i have permited the traffic on the ACL.
So please if anyone has any idea or maybe any doubt in the configuration that I have, please tell me.
Thanks.

I didn't even know what that was until you mentioned it
I've had my mac for about a month. It worked! Thanks heaps

Similar Messages

How can standarize the settings of Firefox, by ADM is not working as it only modifies the registry, how can I configure firefox for all my users ?

I used the adm from Frontmotion but it only works with the FirefixCE version, I need to force Firefox configuration in my domain with a standar version of Firefox, how can I do this, it could be by GPO or logon script

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

How can I deregister without losing all my downloads

Can I regain all lost downloads when I deregister

Your iTunes purchases are associated with your iTunes account not with the device (kind of but not really). So that's why you're able to have your apps and other purchases on more than one device at a time (max of 5 computers and not sure if there is limit for devices - anyone know if there is?). So when you deregister a device, it only affects that device, not your purchase history. So if you get another iPad, you can easily configure it with all your purchased apps and media and everything. You should make sure you have everything backed up in case there is any content that you created on the iPad (like documents or spreadsheets or ...) so that you can restore them to the new iPad.
Take a look at this summary on how to do things...
http://www.syncios.com/transfer-from-old-ipad-to-new-ipad.html
Good luck

HT200241 Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?

Did you follow the instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
AC

Can't configure Wireless Connection to HP OfficeJet Pro L7780

I recently purchased both my iMac 24" 2.8GHz computer with OS x 10.5.2 and HP OfficeJet Pro L7780. I was able to use the HP setup CDs for my Windows laptops and configured them to use the printer in a wireless configuration.
The iMac is creating the headache (actually I think it's HP causing the headache). When I try to install HP's driver 9.7.1 using their utility, it is unable to detect the L7780 in a wireless configuration. The moment I connect via USB or wired Ethernet, the printer is detected without a problem. My printer is located @ 192.168.1.30, fixed IP address via a NetGear FSW308 switch. My iMac is fixed @ 192.168.1.100 and the gateway is 192.168.1.1
I spent hours on the phone with HP support and am still in the same spot... HP software won't find the printer when it is wireless. I can configure OS x 10.5.2 to use the internal L7700 series driver and put the IP address in the dialog box. The printer prints without issue using the OS printer drivers, but the other features such as scan and fax will not work without the HP software.
I can ping the printer and I can connect to the printer's EWS, but the HP software will not find the software.
Overall config: iMac wireless network connection to switch; Printer also wireless connection to switch.
So far HP is dumbfounded and all they can say is that I should call Apple because the printer software works fine when I connect the Ethernet or USB cables.
HELP!
Thanks,
Roland

Thank you for the thought. Yes, although my SSID is public, I have a WEP 128-bit security key. The printer, the iMac and my Windows laptops all connect to the wireless network without issue, as evidenced by my Windows laptops and iMac (if I use the driver included with OS X 10.5.2).
I can ping the printer from the iMac as well as connect to the printer's web interface, so connectivity exists. It is as if the setup software or the printer are trying to communicate using a port that or service that OS X may be blocking.
My OS X firewall is configured to accept all connections though... so that shouldn't be the issue unless there is a bug in accepting all connections.
Thanks,
Roland

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.

Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How can I configure a VM to boot from USB key in Virtual PC of Windows 7?

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin

Hi all,
I want to boot up with a USB key to install a new VM on Windows 7. I heared that Microsoft Virtual PC begins to support USB device on Windows 7. How can i configure it? I don't find any virtual USB device in VM settings on my Windows 7 box.
Thanks for any help.
Scorprio
TechNet Software Assurance Managed Newsgroup MCTS: Windows Vista | Exchange Server 2007 MCITP: Enterprise Support Technician | Server & Enterprise Admin
Virtual PC does not support USB. Windows 7 XP Mode Virtual Machine supports the use of USB devices. Virtual PC and Windows 7 XP Mode VM are not the same thing!

Can we configure company policy in ESS?

Hi All,
My client wants to update company policy in ESS (Like Company Dress Code, Office Timings etc,)
HR Log-in into ESS and post company policies. After that
This should be display for individuals who logs in ESS with their own user name and password.
This above requirement in which workset can we configure.
My idea about that........
I think company should maintain separate blog (Website).
After that create Custom URL (Iview)- Then we can call that URL (Blog/ Website).
Am I right ? or Wrong?
Else is there any other way to configure.
Anoku

Hi Raj,
This can be achieved, ask your ABAP consultant to define a WD application to display PDF / Image documents and upload the respective file to repository. We can call such applications into ESS Portal and can display them.
But end users can not update the same documents whenever changes happen in Policy, there is a dependency with consultant again.
SAP has come up with HR Policy Management in India. Please check below link:
https://websmp106.sap-ag.de/~sapidb/011000358700000959092012E/HR_Policy_Management.pdf

HT3887 how can i configure my wireless keyword so i can use the Function F keys to control volume etc...? I am using 10.5.8 OS

how can i configure my wireless keyword so i can use the Function <F> keys to control volume etc...? I am using 10.5.8 OS

little wireless cameras would not have the ability to send back to the base, even thought the base can reach it.
Now if you take regular cameras and wire them into a Cisco switch that was attached to a wireless bridge that could shine back to the base...now you might have something, but your still going to have to do a survey/path analysis to determine if it is feasible.
Coverage isnt throughput. I see one base station with 3 or 4 sectoral antennas depending on direction, pointing two several distribution bridges to bridge the gaps that go out again to the cameras...something like that. And all of it should be higher in the air than your construction.

Can we configure Oracle 10g xe so that it accept date in yyyy-mm--dd format

I am facing problem in inserting and updating data in oracle server through jdbc. its java.sql.Date class sends date in yyyy-mm-dd format while oracle requires date in dd-mmm-yy format. can we configure oracle server in such a way that we may send date in yyyy-mm-dd format to insert and update?

People should be sure of their information before
posting, even more so if they have an Oracle Ace
credential,as they're more likely to be believed. Not sure what you are saying.
The way I read it, Avi stated that overriding the NLS_DATE_FORMAT as an initialization parameter WILL NOT affect the way XE works, and you still need to set the parameter at the session level.
This is true.
As demonstrated here, where I
- startup my XE (SuSE 10.1 Pro/Linux),
- show the NLS setting,
- log on to a regular user, -
- show the system date,
- change the NLS_DATE_FORMAT system wide by updating my PFILE,
- restart the database
- show the NLS_DATE_FORMAT
- extract the system date.
As you see from the console session, the date still comes out in the format defined by the NLS_TERRITORY, in spite of what the global NLS_DATE_FORMAT indicates.
fcc@fuzzy:~> su - oracle
Password:
oracle@fuzzy:~> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jul 6 08:06:05 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 448790528 bytes
Fixed Size                  1259400 bytes
Variable Size             134219896 bytes
Database Buffers          310378496 bytes
Redo Buffers                2932736 bytes
Database mounted.
show parameter nls_date
Database opened.
SQL>
NAME                                 TYPE        VALUE
nls_date_format                      string
nls_date_language                    string
SQL> connect test/test
Connected.
SQL> select sysdate from dual;
SYSDATE
06-JUL-07
SQL> alter session set nls_date_format='YYYY Mon DD';
Session altered.
SQL> select sysdate from dual;
SYSDATE
2007 Jul 06
SQL> connect / as sysdba
Connected.
SQL> select sysdate from dual;
SYSDATE
06-JUL-07
SQL> create pfile='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/xe.pfile' from spfile;
File created.
SQL> !vi /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/xe.pfile
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup pfile=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/xe.pfile
ORACLE instance started.
Total System Global Area 448790528 bytes
Fixed Size                  1259400 bytes
Variable Size             134219896 bytes
Database Buffers          310378496 bytes
Redo Buffers                2932736 bytes
Database mounted.
Database opened.
SQL> connect test/test
Connected.
SQL> connect / as sysdba
Connected.
SQL> show parameter nls_date
NAME                                 TYPE        VALUE
nls_date_format                      string      YYYY Mon DD
nls_date_language                    string
SQL> connect test/test
Connected.
SQL> select sysdate from dual;
SYSDATE
06-JUL-07
SQL>

Can we configure SAP server installed in RHEL in windows sapmmc?

Can we configure SAP server installed in RHEL in windows sapmmc(Which is also sap server with same version and same DB)?
I have tried to configure using help from previous post in SCN ( SAP MMC in one server to control the entrie landscape ) but it is not working... As picture shown below after entering the details am clicking on add but nothing is happening...
Scenario is I have installed 4 VM's with SAP installed in all (out of it 3 linux and 1 windows) & all communicating well and they are in same Network/Landscape & I can configure/manage/logon all servers in host GUI... But If I shutdown my VM or a Laptop... Every time I have to start all the servers... by starting lsnrctl, DB, sap for all the servers,
Is there any chance to configure sap in windows sapmmc...???
Kindly suggest the process step by step...
Thanks in advance...

Hi Yüksel
Thank you for the reply It helped me to configure but i struck in some place.. Dispatcher is getting stopped... I tried to add 3 different sap servers in sapmmc and tried to start.. Three are getting same errors(Guess same error)
After your suggestion i was able to configure and start SIDadm of host but immediately or after 30sec Dispatcher gets stopped tried to find out some solutions but didnt worked... But i was able to start from there servers manually in linux way startsap, but not in SAPMMC way...
Could you or please help me in solving trace given below...
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      00
sid        W41
systemid   387 (Intel x86 with Linux)
relno      7000
patchlevel 0
patchno    353
intno      20050900
make:      single threaded, Unicode, optimized
pid        22162
kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 22162) [dpxxdisp.c   1345]
shared lib "dw_xml.so" version 353 successfully loaded
shared lib "dw_xtc.so" version 353 successfully loaded
shared lib "dw_stl.so" version 353 successfully loaded
shared lib "dw_gui.so" version 353 successfully loaded
shared lib "dw_mdm.so" version 353 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Tue Mar 31 00:02:41 2015
*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0042.qqq.nxst) took 21 seconds
Tue Mar 31 00:02:52 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 11 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5540]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >willsys41_W41_00                        <
DpShMCreate: sizeof(wp_adm) 17120 (1712)
DpShMCreate: sizeof(tm_adm) 4480000 (22288)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/524056/524064
DpShMCreate: sizeof(comm_adm) 524064 (1036)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (92)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (68)
DpShMCreate: sizeof(vmc_adm) 0 (1684)
DpShMCreate: sizeof(wall_adm) (38456/34360/80/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x4ed2000, size: 5141584)
DpShMCreate: allocated sys_adm at 0x4ed2000
DpShMCreate: allocated wp_adm at 0x4ed4260
DpShMCreate: allocated tm_adm_list at 0x4ed8540
DpShMCreate: allocated tm_adm at 0x4ed8570
DpShMCreate: allocated wp_ca_adm at 0x531e170
DpShMCreate: allocated appc_ca_adm at 0x53251f0
DpShMCreate: allocated comm_adm at 0x5327770
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x53a7690
DpShMCreate: allocated gw_adm at 0x53a76d0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x53a7700
DpShMCreate: allocated wall_adm at 0x53a7790
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: Parameter rdisp/queue_lock_level = 2
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 240 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 239 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
Tue Mar 31 00:02:53 2015
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1752]
***LOG Q0K=> DpMsAttach, mscon ( willsys41) [dpxxdisp.c   12953]
DpStartStopMsg: send start message (myname is >willsys41_W41_00                        <)
DpStartStopMsg: start msg sent
Warning: Swap space is configured quite small with 5035 MB.
It should be two times larger than the amount of RAM (3066 MB).
See note 171356 for more information.
Warning: tmpfs at /dev/shm is configured quite small with 1532 MB!
Minimum value is 2048 MB.
Recommended size is 75 % of RAM + swap.
*** INFO Shm 13 in Pool 10    59082 KB estimated     58800 KB real (    -282 KB    -72 %)
CCMS: start to initalize 3.X shared alert area (first segment).
*** ERROR => DpWPCheck: W0 (pid 22217) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22217) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => DpWPCheck: W1 (pid 22218) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22218) exited with exit code 255
*** ERROR => DpWPCheck: W2 (pid 22219) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22219) exited with exit code 255
*** ERROR => DpWPCheck: W3 (pid 22220) died (severity=0, status=65280) [dpxxdisp.c   16083]
child (pid=22220) exited with exit code 255
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:04 2015
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Mar 31 07:03:04 2015
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program          Cl User         Action                    Table
0 DIA    22217 Ended         no      1   0        0
1 DIA    22218 Ended         no      1   0        0
2 DIA    22219 Ended         no      1   0        0
3 DIA    22220 Ended         no      1   0        0
4 UPD    22221 Ended         no      1   0        0
5 ENQ    22222 Ended         no      1   0        0
6 BTC    22223 Ended         no      1   0        0
7 BTC    22224 Ended         no      1   0        0
8 SPO    22225 Ended         no      1   0        0
9 UP2    22226 Ended         no      1   0        0
Dispatcher Queue Statistics Tue Mar 31 07:03:04 2015
===========================
+------+--------+--------+--------+--------+--------+
| Typ |    now |   high |    max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP |      4 |      4 |   2000 |      4 |      0 |
+------+--------+--------+--------+--------+--------+
| DIA |      1 |      1 |   2000 |      1 |      0 |
+------+--------+--------+--------+--------+--------+
| UPD |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| ENQ |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| BTC |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| SPO |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
| UP2 |      0 |      0 |   2000 |      0 |      0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 6
wake_evt_udp_now 1
wake events       total     5, udp     1 ( 20%), shm     4 ( 80%)
since last update total     5, udp     1 ( 20%), shm     4 ( 80%)
Dump of tm_adm structure: Tue Mar 31 07:03:04 2015
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks Tue Mar 31 07:03:04 2015
=============================
Slots: 300, Used: 0, Max: 0
+------+--------------+----------+-------------+
|   id | owner        |   pid    | eyecatcher |
+------+--------------+----------+-------------+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:10 2015
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >willsys41_W41_00                        < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing proc (22215) (SOFT_KILL)
Stop icman
killing proc (22216) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
kill(22215,0) -> ESRCH: process died
wait for end of icman
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:11 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:12 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:13 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:14 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:15 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:16 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:17 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:18 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:19 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:20 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:21 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 31 00:03:23 2015
NiISelect: TIMEOUT occured (1000ms)
kill(22216,0) -> ESRCH: process died
DpStartStopMsg: send stop message (myname is >willsys41_W41_00                        <)
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name                    -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
MsIBufAlloc: allocated buffer
NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)
NiBufIIn: NIBUF len=458
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 458 bytes
MSG received, len 110+348, flag 4, from willsys41_W41_00    , typ 0, key FFFFFFFF00000000
DpHalt: received 348 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 2 received data (rcd=214,pac=1,MESG_IO)
NiBufIIn: NIBUF len=214
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 214 bytes
MSG received, len 110+104, flag 3, from MSG_SERVER          , typ 0, key -
DpHalt: received 104 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name           MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Tue Mar 31 00:03:24 2015
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13304]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelPSet: set events of sock 11 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelPRemove: removed last sock 11 (pos=3)
NiSelIRemove: removed hdl 2
NiICloseHandle: shutdown and close hdl 2 / sock 11
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EsCleanup destroy slot 0
<EsMap: unlink /SAP_ES_00_000
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0xcef3328 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmDelete( 13 )
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x5e1000)
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x5e1000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x4ed2000)
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x4ed2000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 3, 3 )
ShmProtect( key 3 valid )
ShmProtect( slot Index 2 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x1655000)
ShmProtect( after shmat )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x1655000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 14 ) = 0740 (octal)
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xbf99a5e8 )
ShmGet( 10, 11, 0, 2, 0x0xbf99a52c )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 42, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 43, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 45, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 44, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 54 ) = 0740 (octal)
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 46, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 47, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0xbf99a5e8 )
ShmGet( 10, 17, 0, 2, 0x0xbf99a52c )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 34 ) = 0740 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 58 ) = 0740 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 51, 3 )
ShmProtect( key 51 valid )
ShmProtect( slot Index 50 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x6e14000)
ShmProtect( after shmat )
ShmProtect: shmat key 51 prot 3/0 done
ShmCreate( 51, 0, 2, -> 0x0x6e14000 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 52, 3 )
ShmProtect( key 52 valid )
ShmProtect( slot Index 51 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x60b000)
ShmProtect( after shmat )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x60b000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 30 ) = 0740 (octal)
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 56 ) = 0740 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x151f000)
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x151f000 )
ShmCleanup SHM_NO_BUFFER
ShmCleanup( 48 )
ShmCreate( 48, 0, 2, 0x0xbf99a5e8 )
ShmGet( 40, 48, 0, 2, 0x0xbf99a52c )
ShmCreate( 40, 0, 2, 0x0xbf99a1ec )
ShmKeyPermission( 40 ) = 0740 (octal)
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0xbf99a5d8 )
ShmProtect( 31, 3 )
ShmProtect( key 31 valid )
ShmProtect( slot Index 30 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x573d000)
ShmProtect( after shmat )
ShmProtect: shmat key 31 prot 3/0 done
ShmCreate( 31, 0, 2, -> 0x0x573d000 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0xbf99a5e8 )
ShmProtect( 10, 3 )
ShmProtect( key 10 valid )
ShmProtect( slot Index 9 )
ShmProtect( Mode: 76000000 )
ShmCreate( 10, 0, 2, -> 0x0xb3723000 )
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_POOL_50
ShmCleanup( 50 )
ShmCreate( 50, 0, 2, 0x0xbf99a5e8 )
ShmKeyPermission( 50 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0xbf99a5c8 )
ShmProtect( 62, 3 )
ShmProtect( key 62 valid )
ShmProtect( slot Index 61 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat 0x8b30e000)
ShmProtect( after shmat )
ShmProtect: shmat key 62 prot 3/0 done
ShmCreate( 62, 0, 2, -> 0x0x8b30e000 )
MpiCleanup() -> 0
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 1 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 6 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 7 ) = 0740 (octal)
SemKeyPermission( 8 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 10 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 11 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 12 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 13 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 14 ) = 0740 (octal)
SemKeyPermission( 15 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 16 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 17 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 18 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 19 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 20 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 21 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 22 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 24 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 25 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 26 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 27 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 28 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 29 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 30 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 31 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 35 ) = 0740 (octal)
SemKeyPermission( 36 ) = 0740 (octal)
SemKeyPermission( 37 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 42 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 43 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 44 ) = 0740 (octal)
SemKeyPermission( 45 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 47 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 48 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 49 ) = 0740 (octal)
SemKeyPermission( 50 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 51 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 53 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 54 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 55 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 56 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 57 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 58 ) = 0740 (octal)
SemKeyPermission( 59 ) = 0740 (octal)
SemKeyPermission( 62 ) = 0740 (octal)
SemKeyPermission( 63 ) = 0740 (octal)
SemKeyPermission( 64 ) = 0740 (octal)
SemKeyPermission( 65 ) = 0740 (octal)
SemKeyPermission( 66 ) = 0740 (octal)
SemKeyPermission( 67 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 69 ) = 0740 (octal)
SemKeyPermission( 70 ) = 0740 (octal)
SemKeyPermission( 72 ) = 0740 (octal)
removing Semaphore-Management
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 0 (type=2)
NiICloseHandle: shutdown and close hdl 0 / sock 8
DpDelSocketInfo: del info for socket 1 (type=1)
NiICloseHandle: shutdown and close hdl 1 / sock 9 - sock 10
***LOG Q05=> DpHalt, DPStop ( 22162) [dpxxdisp.c   11739]
*** shutdown completed - server stopped ***
Thanks in advance....
Regards,
Sundar

Can't configure OfficeExtend

I just bought an Aironet 600 OfficeExtend AP and hooked it up to my WLC 5500 but I can't configure it.
I've got 10 AP running just fine but the Aironet 600 shows operational status as "UP" (normal is "REG") and "Admin status", "AP Mode" and "AP Sub Mode" are all grayed out.
I installed the newest firmware on the WLC (ver 7.2.110.0) and it has upgraded the Aironet 600 as well.
I've read to through the installation manuals and from everything I can see I should be able to configure the Aironet 600 as soon as it contact WLC,
So what am I missing?

The guide says:
"""snip"""
•The access point is not broadcasting the enterprise WLAN.
Resolution: Ask the teleworker to check the cables, power supply, and LED status. If you still cannot identify the problem, ask the teleworker to try the following:
–Connect to the home router directly and see if the PC is able to connect to an Internet website such as http://www.cisco.com/. If the PC cannot connect to the Internet, check the router or modem. If the PC can connect to the Internet, check the home router configuration to see if a firewall or MAC-based filter is enabled that is blocking the access point from reaching the Internet.
–Log into the home router and check to see if the access point has obtained an IP address. If it has, the access point's LED normally blinks orange.
"""snip"""
If you have the ap joined already then make sure:
The ap radios are enabled.
If the aps part of an ap group make se the group breasts the SSIDs.
HTH
Amjad
Sent from Cisco Technical Support iPad App

Can't configure FingerScan after re-install the system

I had to re-install the whole system from the image. All went well and works fine now BUT... I can't configure the finger scann utility with my fingerprints. Every time I try, I am able to scan it and I can see that it works. But then the tool asks to save the configuration.
When I try to save it I get a message which in German says.
Vorgang fehlgeschlagen. Doppelte Vorlagen sind bereits vorhanden.
I'll try to translate in English :
Operation failed. Double templates are already available.
I don't have any idea what I have to do now and I want to use it.
Who can help me with this problem?
Thank you in advance
thunderstorm 007

Hi
Thanks for all the help...BUT... I haven't anything that has such an icon or is named like "True suite access manager". And if Toshiba people would sometimes try to read forums, they could helpus.
I also wrote them about this problem but didn't get an answer yet.
What is the next step if this tool isn't in the list and I also couldn't find d file in the TOSHIBA directories (c:) with such an icon.
I hope you have another idea ;-))
Cheers from Switzerland

Can't configure personal cloud after firmware uppdate

I recently bought in ix2-device. I uppdated the firmware to version 4.1.108.32627 with the result that I now can't configure a personal cloud.
When I try, the browser opens the domain https://portal.iomegacloud.com with an error message saying the page can't be displayed.
Something must have gone wrong at the uppdating for the firmware. But what? And how do I fix this?

Hello all,
If you are experiencing problems setting up or using personal cloud, please double check that port forwarding is in place and shown as open if using a port checking utility. (80, 443 for remote web browser access, 50500-50599 for LSM/basic cloud functions) How do I set up my router for Personal Cloud?
At that point please contact LenovoEMC support to create a support incident and troubleshoot for your specific circumstance.
Lenovo Contact Information is region specific. Please click the correct link then access the Contact Us at
the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

ISA550 I can't configure it at all

Similar Messages

Maybe you are looking for