ISA570 1.2.20 Firmware-Random Reboot and Errors

I updated the firmware to the latest version about a month or so ago and it seems this version has had some issues. Currently, I have a support case opened with Cisco to figure out what happened today when all of a sudden the firewall rebooted on it's own. Not too mention, there are tons of errors and warnings since upgraded from 1.2.15 to this new version, which fixes the heartbleed vulnerability. Anybody else having random reboots or a ton of new errors and warnings present?

Yeah, I had to go back to .15 which seems the most stable and I am sure there are many others who are doing the same. It is unfortunate that none of these issues are fixed and I can say these issues probably will never be fixed after speaking with Cisco small business support. If nobody calls in and speaks up about these issues Cisco won't know there is a widespread issue with this firmware. They assured me from .19 to .20 the only fix was the heartbleed, but I have a hard time believing that as others have had issues with the reboots I believe in .19. At some point in the near future we will have to move to another product all together for lack of support. Don't get me wrong this is a great product with the old firmware, but right now I can no longer use SSL to the device or SSL VPN remote access because of the heartbleed vulnerability. Sad but true.

Similar Messages

New Z10 Random reboots and text notifications STILL

June 13th I upgraded from a Torch to the Z10. 3 days later, it was randomly rebooting about 4 times a day. I went through a wipe and reinstall and it seemed to work for about a week and then it started with the random rebooting as well as telling me I had texts when I didn't, and telling me every single day that there was a software upgrade available for the very same OS I already had on the phone!
I took it into Rogers and because it was past 2 weeks my options were dismal so I went with the free option. I had them send it in to be fixed. I just picked it up today and haven't even had it back 4 hours. I just got it back to where I wanted it preference wise and blammo! Random reboots and text notifications when there are none.
My options from here? Send it in AGAIN, or pay a $120 deductible through my protection plan for a 'new' phone (= refurbished - I was told they cannot guarantee me it would be brand new), or pay for the phone outright (in the neighborhood of $600) and then start a new plan for a different brand of phone (and yes, I will convert to the other side if this doesn't get resolved properly).
So frustrated because I feel it's extremely unfair to have to pay to own a device that doesn't even work just to get out of my contract (this is my provider but if they aren't able to get their money back from BB then why would they give me mine back?)... especially given that I received it just over a month ago and already had to send it out for a repair that didn't even work!
HELP!? I've tried everything... I'm SO disappointed and frustrated. I've been a loyal BB customer for over 5 years. This is about to end if there is no resolution. I need a phone I can rely on.
Thank you in advance to the powers that be - may they have mercy!

Hey kc1881,
Welcome to the BlackBerry® Support Community Forums.
To better assist you with this issue and to gather device event logs to determine the root cause, we would request that you contact your wireless service provider to have this issue escalated to BlackBerry Technical support for further trouble shooting.
Let us know if you have any questions.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Oct 22, 2013 11:58 PM downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guid

Oct 22, 2013 11:58 PM
downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........running 10.8.5 til today................???????? Can run in safe boot, but what do i do now ??? thanks
MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHz

Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

Downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc'

downloaded 10.9 all well 'til I get desktop and can't enter my password, message of error, and it shuts down: reboot and error reappears"your computer restarted because of a problem. touch any key.....etc' 75-yr-old needs guidance.........thanx
running 10.8.5 til today........................???????? Can run in safe boot, but what do i do now ??? thanks

Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

Lumia 920 random reboots and dropped mobile data a...

Hi! Wondering if anyone can shed some light on an issue I'm seeing with TWO Lumia 920 handsets?
Both were recently wiped for new users - full "reset your phone" option. After installing the Black update, the phones now randomly reset and reboot. In addition, they cannot seem to hold onto a data connection (either GPRS, 3G or H) - the mobile data connection works when the phone is first boot up, but loses connectivity some time later. Mobile data isn't restored unless the phone is turned off and on again. Totally scratching my head on this - and as it affects two phones, I'm pretty sure it isn't a faulty handset. Steps I've tried:
Swapping SIM cards around (including SIMS not associated with those two handsets)
Manually setting APN details (we're on Orange - also EE)
Installing Access Point app (which isn't installed as standard) for auto-configuration of APN
Toggling between 4G and 3G maximum connection speed settings
Manually selecting mobile network (i.e. disabling automatic network selection)
Wiping and resetting both phones (multiple times)
Installing fresh firmware image via the Nokia Software Recovery Tool
All these don't help! Frustratingly, everything works fine over WiFi - and I have observed that the random reboots only occur when data is being transmitted over mobile network. Both handsets belong to Orange UK (EE), and are updated with EE's approved Black firmware...
Anyone seen anything similar? Anyone come across a fix?!?

Hi! Wondering if anyone can shed some light on an issue I'm seeing with TWO Lumia 920 handsets?
Both were recently wiped for new users - full "reset your phone" option. After installing the Black update, the phones now randomly reset and reboot. In addition, they cannot seem to hold onto a data connection (either GPRS, 3G or H) - the mobile data connection works when the phone is first boot up, but loses connectivity some time later. Mobile data isn't restored unless the phone is turned off and on again. Totally scratching my head on this - and as it affects two phones, I'm pretty sure it isn't a faulty handset. Steps I've tried:
Swapping SIM cards around (including SIMS not associated with those two handsets)
Manually setting APN details (we're on Orange - also EE)
Installing Access Point app (which isn't installed as standard) for auto-configuration of APN
Toggling between 4G and 3G maximum connection speed settings
Manually selecting mobile network (i.e. disabling automatic network selection)
Wiping and resetting both phones (multiple times)
Installing fresh firmware image via the Nokia Software Recovery Tool
All these don't help! Frustratingly, everything works fine over WiFi - and I have observed that the random reboots only occur when data is being transmitted over mobile network. Both handsets belong to Orange UK (EE), and are updated with EE's approved Black firmware...
Anyone seen anything similar? Anyone come across a fix?!?

Gaming 7 random reboot and select proper boot device

ok so new build. Works great. However randomly after I restart or shut down, I get "reboot and select proper boot device."
so I go into the bios, try to troubleshoot the problem, restart and it boots fine 4 or 5 times. I think I fixed it. then later I restart, its back.
I have gaming 7 board and an samsung 840 evo 250gb HDD.
I guess if it does it again ill try to repair windows. Then I guess I will figure the SSD is bad. Hope not.
I was just wondering if you guys had any ideas. Thanks
MSI ATX DDR3 2600 LGA 1150 Motherboards Z97 GAMING 7
Corsair Vengeance Pro 16GB 2x8GB DDR3 2400MHz PC3 19200
Intel Core i7-4790K Processor (8M Cache, up to 4.40 GHz
Samsung 840 EVO 250GB 2.5-Inch SATA III Internal SSD
Gigabyte GeForce GTX 970 G1 Gaming 4GB GDDR5 PCiE Video Graphics Card GV-N970G1 GAMING-4GD

if you use different storage do you have such issues?
what is your current bios version?
do you have latest firmware installed on your samsung ssd?
have you tried to >>Clear CMOS Guide<< with power cord removed to see if that can helps?

Help for N900 that randomly reboot and that have s...

DISCLAIMER
A moderator deleted an entire thread with details that have helped many many users with N900 phones that are rebooting because they believed we were discussing debranding N900s..
Firstly, the N900 is not branded..
Secondly, we were discussing changing settings on the device to stop the devices from randomly rebooting.. Something SUGGESTED BY NOKIA on the bugs.maemo.org bug tracker website.
Nothing in this thread will invalidate your warranty and all information is condensed from official Maemo websites.
If your device is randomly rebooting:
RESTART YOUR DEVICE AFTER A RANDOM REBOOT
There is a counter inside your phone that increases by 3 every time it randomly reboots. If this counter reaches 50 (after 17 random reboots in a row) your device will probably stop booting ALL TOGETHER!
To stop your device from completely locking, you must power off your device normally. Use the power button then select "switch off". When you power your device back on, the counter is reset. Remember, if you don't reset your device, it will stop booting.
REPAIRING A DEVICE THAT NO LONGER BOOTS
If your device was randomly rebooting but now fails to boot it may have reached its count limit. When you turn on your device it may stop at the 5 dots loading screen and freeze.
Here's a method for getting your device working again.
Download flasher-3.5:
For Nokia forums staff this is an OFFICIAL PUBLIC NOKIA TOOL. USING THIS TOOL DOES NOT AFFECT THE DEVICE WARRANTY. PLEASE DO NOT DELETE THIS POST AGAIN.
Flasher can be obtained from the Nokia website:
http://tablets-dev.nokia.com/maemo-dev-env-downloads.php
Download and install flasher onto your computer. For more information on using flasher, you can see the maemo page here:
http://wiki.maemo.org/Flasher
Turn off your N900
Remove the battery
Insert the battery.. but leave it off
Plug the USB cable into your computer.. This may not work in ALL ports on your computer. Sometimes ports at the back of the computer work better than those at the front.
Open the keyboard on your N900, press and hold the 'u' button and plug the USB cable into the N900.. keep the u button pressed.
The Nokia logo should appear on your device, a small USB icon should appear in the top right of the N900 screen. The backlight may not light up leaving the screen dark. You can release the u button now
NOW ENABLE R&D MODE TO START THE DEVICE
Use flasher application. On windows 7 this may mean running in windows xp mode
Open a cmd window (start run cmd) then enter these commands:
cd "\program files\maemo\flasher-3.5"
flasher-3.5.exe --enable-rd-mode
Flasher should run for a few seconds then exit.. If it hangs "waiting for suitable device" Try another port on your computer. Try a different computer. Ask questions here. Flasher doesn't always work on all machines
Remove the USB cable from your N900 and turn it on. It should boot up. Note that there is a small spanner icon under the Nokia logo
If your device still does not boot:
Check that the spanner icon is present when you turn the device on. If it is not, the device is not in R&D mode.. Start going through these instructions again
If the spanner logo is present and the device still does not boot, stop.. this process may not help you
Turn the N900 back off
Press and hold the u button on the keyboard and plug the USB cable in. Keep the u button pressed
The Nokia logo should appear on your device, a small USB icon should appear in the top right of the N900 screen. The backlight may not light up leaving the screen dark. You can release the u button now
NOW DISABLE R&D MODE TO START THE DEVICE
In the cmd window on your pc, re-run the flasher command with a different option:
flasher-3.5 --disable-rd-mode
Remove the USB cable and turn the phone back on
CHANGE ENABLE_OFF_MODE TO STOP RANDOM REBOOTS
I have written a tool to help stop the random reboots on N900 devices. This tool issues the following command
echo 0 > /sys/power/enable_off_mode
and updates the /etc/pmconfig file to make the change permanent
To use the tool you will need to install the rootsh package:
http://maemo.org/downloads/product/raw/Maemo5/rootsh/?get_installfile
Now download the fixpm.sh file:
http://chris.intrepid.cx/N900/fixpm.sh
Open an x terminal and type the following command
sudo gainroot
sh MyDocs/.documents/fixpm.sh enable
If you would like to disable the update, you can use the following commands:
sudo gainroot
sh MyDocs/.documents/fixpm.sh disable
Please click the kudos button if you found this helpful and please let me know if you have problems with the instructions, need help with them or if they didn't work
Message Edited by cpitchford on 28-Dec-2009 07:12 PM

Congrats!!
There are some steps you can follow to help stop your phone from rebooting...
Follow the steps in the first post under the section:
CHANGE ENABLE_OFF_MODE TO STOP RANDOM REBOOTS
Open these links on your N900:
Download and install the rootsh package:
http://maemo.org/downloads/product/raw/Maemo5/rootsh/?get_installfile
Download the fix script:
http://chris.intrepid.cx/N900/fixpm.sh
Save it in the Documents folder
Open an X terminal and run these two commands
sudo gainroot
sh MyDocs/.documents/fixpm.sh enable
Message Edited by cpitchford on 30-Dec-2009 11:57 AM

New E65 randomly rebooting and apps crashing

Dear Nokia,
Pleas etake the time and effort to supply a working E65 firmware for downloading since the one that my E65 was shipped with (1.0633.18.01) works rather poorly:
- The webbrowser will crash randomly
- The network connection will quit randomly
- The phone will reboot randomly
And this while I only have used about 0.1% of all available features on said phone. One could say the failure rate is rather high.
I upgraded from a Nokia 6310i that actually still worked quite well but was not Bluetooth compatible with my new car-kit so I made the dubious decision to upgrade (downgrade?) to the E65, since the N95 was just a little too much of a good thing for me.
As it turns out the N95 already has firmware upgrades while the older E65 that would benefit from less bugs too apparently was forgotten.
Please oh please fix your product.
Sincerely,
sprins

sprins - the boards here are for user-to-user support only, and aren't the place for getting a response from Nokia. The moderators are only here to moderate, so aren't able to help with these kind of issues. If you want help from Nokia, you should use the 'Contact us' link at the top of the page to contact your local Nokia team.
You might also want to read over the Discussion Board Guidelines which is something everyone should read before posting on the boards. It explains this and other things.
Board Mod Team
READ THIS FIRST!
Click here if you want help from Nokia

MPC 800K random reboots and BSOD

After finding out that the onboard graphics card was basically the most pointless device in the world (wouldn't play video from my tv card smoothly), I purchase a radeon 9550.
Now I'm experiencing problems, I'm not sure whether this is down to power failures, or a dodgy card?
But if its down to the power supply, then why would MSI put such a weedy thing in the device considering the amount of expandability which the device has.
Has anyone had any similar problems???

sorry for being a little vague
Basically the PC (on random occasions):
has video corruption
the video cuts out then PC reboots with or without BSOD's
VPU recovery mode kicks in
Heres some details of the actual error reports that I have available:
The driver ati2dvag for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your hardware device vendor for any driver updates.
I've gone into ATI control panel thing and change a few of the settings (lowered AGP speed), to see if this will lower the power consumption... If anyone else has any ideas, please let me know.

Random reboots and false start issues - PSU the culprit?

Hi guys,
Every so often (seemingly randomly, sometimes after an hour of idling, sometimes after two days of being at full load), my computer reboots, flashing up a Windows XP (running a patched SP1) BSOD very quickly (I can just make out machine exception error), and then rebooting (despite me asking it not to reboot on fatal errors).
I have this PSU, which the Enermax website claims puts out 35A on the 12v rail. I've read some things on this board about people having trouble with some Enermax PSUs, though... is mine one of them?
The false starts seem only to occur on warm boots (hard and soft), and post very slowly, usually pausing on the memtest, and when detecting IDE drives, but will always boot into windows, freezing on the Windows XP loading screen (same place every time).
Full specs:
Athlon64 3500+ skt939
MSI Neo2 Platinum - 1.3 bios, running nForce 5.10's
2x512MB Corsair XMS3200PRO in slots 1 + 2
Gainward 6800GT GS
Creative Audigy 2
200GB Maxtor 7200.7 SATA (boot drive)
2x80GB Western Digital 7200/8MB drives in RAID 0
200GB Western Digital 7200/8MB
NEC 2500A DVD burner
MSI 54g wireless card in the comms slot
The above mentioned Enermax PSU
Logitech DiNovo Media Desktop
I've tried reducing HT to 3/4x, putting my RAM in slots 1/3, turning the RAM timings right down, turning fast writes off... can't think of much else. =/
Any help would be much appreciated.
Chris

Thanks for the quick responses.
I've Prime95'd for about an hour (trying to get it to fall over), and it was absolutely fine... I'll leave it going overnight tonight to see if I can trip it up over time. I need to find a floppy drive before I can run memtest86... unless there are cd-bootable binaries somewhere?
The Event Viewer is rather terse about the crashes... just telling me this:
Quote
Event Type:   Error
Event Source:   System Error
Event Category:   (102)
Event ID:   1003
Date:      15/10/2004
Time:      18:26:21
User:      N/A
Computer:   SENORBOB
Description:
Error code 0000009c, parameter1 00000004, parameter2 805366f0, parameter3 b2000000, parameter4 00070f0f.
However, I've noticed when I come back from the crash each time, nvraidservice.exe crashes when logging into windows -
Quote
Event Type:   Error
Event Source:   Application Error
Event Category:   None
Event ID:   1000
Date:      13/10/2004
Time:      19:04:41
User:      N/A
Computer:   SENORBOB
Description:
Faulting application nvraidservice.exe, version 1.0.1.0, faulting module nvraidservice.exe, version 1.0.1.0, fault address 0x0000c2e7.
I wonder if this is something to do with it? It wouldn't explain the false starts, but could well be something to do with windows crashing.
Again, thanks very much for the responses, and any other ideas you might have.
Chris

IPHONE 4 (IOS 7.1) KEEPS RANDOMLY REBOOTING AND CRASHING

OKAY SO I AM COMPLETELY LOST FOR OPTIONS AND I DO NOT KNOW WHAT TO DO.
I HAVE AN IPHONE 4 THAT RESTARTS ALL THE TIME WHEN IM USING IT, ATLEAST 6-7 TIMES A DAY WITHOUT FAILURE.
I HAVE BEEN TROUBLESHOOTING THIS PROBLEM FOR A WHILE AND HAVE TRIED MANY THINGS BUT STILL HAVE NO LUCK
I HAVE CHANGED THE BATTERY (NOTHING CHANGED)
RESTORED, FACTORY RESET, DOWNGRADED FIRMEWARE (NONE OF THAT SOLVED ANYTHING)
I WAS TOLD THAT IT IS NOT A HARDWARE PROBLEM AND THERE MIGHT BE A BUG ON THE IOS 7.1 UPDATE WHICH MAKES THE PHONE CRASH AND REBOOT AS IT PLEASES.
DOES ANYONE ELSE HAVE THESE PROBLEMS AND IF SO HAVE YOU FOUND ANY WORKING SOLUTIONS? PLEASE HELP
I ALSO CHECKED MY DIAGNOSTICS LOG AND NOTICED THESE TWO ERRORS WERE QUITE FREQUENT IN IT. I HOPE THIS SHEDS SOME LIGHT ON WHAT THE PROBLEM COULD BE.

Yes...I have the same problem too after upgrading to ios 7.1..I end up buying an android phone yesterday..I am seriously frustated as i cant use my phone for the past couple of week. Everytime I open my camera it crashes...answered call and crashed....open email and crashed...trying to call someone and it crashed...and plenty of other occasion!!...*** iphone????
Things that I have done as below :-
1 - Delete email accounts - someone says that it solved the issue. - FAILED
2 - Restore the phone - FAILED
3 - Restore and use as new phone - FAILED
4 - Bought an android - SOLVED !!!!

My Macbook Pro randomly reboots and shows an error code at the booting screen. Is there a fix for this problem yet? Thanks Guys!

Please reply or comment ASAP!

Well the error codes occur at the white warning screen when it crashes....It says press a key or wait for reboot. I would have tot be at my mac at the random time it does it. I will keep a lookout but it will be hard to get, becuase i would have to take an actual picture of it!

Gtx 560 Ti hawk random reboot and battlefield3 crash

hi there, I already read problem in this forum, just want to make sure what should I do
My problem:
sometimes reboot while browsing
sometimes reboot while doing any other activities
battlefield3 crash after 5-15 minutes with smooth high graphic
Already did:
update latest driver
lower gpu and vclok to 875 and 1050
The problem still the same, I already see this topic https://forum-en.msi.com/index.php?topic=159746.0 , was that because of my power supply?
my psu brand new strike x 600w 80 plus bronze
and here my other spec:
windows 7 ultimate 64-bit
processor: i7-3770k CPU @ 3.50GHz
Memory: 8gb RAM
page file: 1705MB used, 14574 MB available
DirectX 11
I don't have another machine for try vcard :(
please for the help

Quote from: flobelix on 02-September-12, 19:46:00
Since that psu has 50A on single +12v that doesn't seem to be the issue.
Get Afterburner and check temps:
Ahh the psu exactly same with your link, I'll check temp later cz for now my cpu under repairing or reinstalling by technician, thanks for your big help, flobelix
Quote from: Svet on 02-September-12, 22:35:54
If you use another video card does your computer works stable?
have you checked CPU underload temp ?
Can you pass Prime95 testing over night without problems?
Checked memory with
What mainboard you have?
in such case VGA is not even loaded/stressed,
so possible the issue is somewhere else in your computer.
Are you using msi vga drivers for your card from msi web?
I have not used another card cz used to laptop user, and first time using desktop computer use that vcard, I'll check and test as your suggestion later cz of my reason above.
mainbord : msi Z77MA-G45
about vga driver, I used automatic update from: nvidia control panel -> help -> update, and I download then installed it become v3.xxx I didn't remember "xxx"
thanks for your big help, Svet
I'll posting again in this topic asap after my computer done for repair, cya next post. Thanks once again guys for your support

Random reboots and low 3.3v

Before I flip out completely, can anyone help?
Just rebuilt a box wiith a change to MSI mb and AMD CPU, new video card, and had some problems with random boots. I loaded pc-alert4. It clued me in that my 3.3v voltage was around 2.04-2.4! Bios also showed the low 3.3v voltages.
I replaced my 1 month old 420watt psu (Turbolink cwt-420 ATX, with 28A, 40-A, 18A) with a Truesilent 450 watt--- 25,36,19a)...the guy at PC-CLUB said it was rock-stable. He was very suprised when I brought it back because it was dead. The replacement worked fine, my 3.3v was around 3.24 v.
BUT random boot problems again!.
I hoped it was windoze, and ran norton and cleaned up the missing shortcuts etc. Ran fine for 36 hrs. So, hoping that the problem was Windoze not hardware, and now solved, I cleaned up my cables and got ready to put the case on the damn thing, but 3.3 VOLTAGE IS BACK AT 2.04!!!!!!!!!!!!
I do have 4 WDC harddrives in carriers, all running on separate IDE channels, with a Promise ATA133 controller for two of them, and two optical drives on IDE2. Also I have 4 USB2 ports on a front pantel.
so I've tried another CPU, tried running one stick of memory in either slot, disconnected all but one drive, underclocking, disabling AGP 8, and all same story?
Could this be a motherboard problem? Coukd I have two (three) bad PSU in a row, causing the same bad voltage? (I doubt this one). Poltergeists? A short from my mounting posts? Bad Karma from another life? Payback for not sticking with Intel CPU's? My ex-girlfriends revenge?
k7n2 delta-l
amd 2.5+ XP
e-vision gforce5200 256 meg
Buffalo 512 DDR 400 x2 in dual mode
Your suggestions greatly appreciated!
Thanks,
Adam S.

sound like that mobo got short out, Hope I'm wrong, better exchange mobo.

XP SP2 system random reboots and app crashes

I got this new setup in signature about a month ago... Installed XP SP1 and right away put SP2 on it. At times it can run nice for a number of days, other times it acts weird applications crash and without any warning system reboots - looking in system log there's an error with "Error code 00000019" that I can't make anything out of.
Got latest BIOS and drivers from Live Update.
CPU TEMP 46 C and SYS TEMP 40 C CoreCenter shows when idle. Heavy use CPU goes up to 63 C, SYS only rises a couple of degrees.
Windows Memory Diagnostic reports no errors.
Any ideas and suggestions? What else can I try? Is it a OS or hardware prob most likely?
Thanks in advance
I read the thread about SP2 not booting but I've never had any problems booting my Windows...
I got "DEP for essential windows programs and services only" set, I've tested the other one too for a while but that failed curing my illness.
Specs at this time:
Chieftec Miditower with 2 Papst and 2 Thermaltake 80mm fans
Chieftec HPC 360-202 PSU (35A@+5V 28A@+3.3V 17A@+12V 340W Max)
MSI Intel 865PE Neo2-P (store called it Neo2-PFS)
Pentium 4 3.20E GHz with fan from box HT enabled
2 x 256MB A-Data DDR400 PC3200 in socket 2 and 4
GeForce 4 TI 4600 originally from a Dell Dimension 8200
Seagate Barracuda 80GB S-ATA
Sony CD-ROM + PS/2 Keyboard + Boomslang 2100 USB Mouse
Windows XP Professional Service Pack 2
Running on BIOS Setup Defaults

Quote
Originally posted by Cooroona
I read the thread about SP2 not booting but I've never had any problems booting my Windows...
I got "DEP for essential windows programs and services only" set, I've tested the other one too for a while but that failed curing my illness.
About the DEP - maybe you should try some Bas-magic
HAL & ServicePack 2 XP

ISA570 1.2.20 Firmware-Random Reboot and Errors

Similar Messages

Maybe you are looking for