ISA570 - How to make my WebServer always uses the same Public IP

Hi all
I have reserved one IP of my pool to my exchange server.
The Reverse DNS is configured for this IP.
My exchange server is sometimes rejected by the other because it is using the first public IP of my pool to go on Internet, and not the one i would like.
So in My ISA570, how to specify the public IP of my pool my exchange server will used ?
Fo the moment, all my alias for each IP are created, the port forwarding is OK for my exchange server to send and receive mails, et the web OWA is OK.
I have tried from the advanced NAT to force like this (the last line in this picture), but when it is enable, all my subsite are not able to join the Web Exchange interface...
I am sure i made a mistake, could you please help me ?
Thanks
Kevin

Is it an option to use Static NAT instead of Port Forwarding?  By that I mean, do you need to share the one Public IP from  your Pool of IPs with anything other than the Exchange Server?
Shawn Eftink
CCNA/CCDA
Please rate all helpful posts and mark correct answers to assist others searching for solutions in the community.

Similar Messages

  • How do my wife and i use the same ipad?

    How do my wife and i use the same ipad?

    Nothing keeps you from handing it "back and forth" to share. I do this all the time on our couch with my Wife's iPad...
    I think your quesiton revolves around having your own bookmarks and other data/info on the device. 
    The iPad is meant to be a "single user device"; there isn't a login/logout to differenciate one user from another.  "The iPad isn't a computer"..  ;-)
    But, that being said, there are lots of ways to share the iPad/iOS environment.  Many apps, such as Facebook, let you login and out..  so, while you share the same app, each of your login is different.
    For bookmarks and notepad it is a little trickier..  You can each use a different browser (so all of your bookmarks are complerety seperate.)
    In some cases I would sugest a couple get a $900 Macbook Air rather than an iPad if this sharing won't work.  "Why can't I log in and out of and iPad?".  I think that the fact that it doesn't gives the iPad many adantages over a computer.
    If you have more specific questions pleaser ask away.  Just like you share the kitchen table and many other things around your household, there are many ways to make this work!  ;-)
    Matt

  • Firefox always uses the same session id

    Hi,
    our company changes standard browser from IE6 to Firefox 3.5.10 .
    Now we have  great problems with with our ColdFusion application when running it inside Firefox ,because Firefox doesn't create new session id
    when working  in two tabs or two windows. It always uses the same cfid and cftoken.
    So it is not possible to work with two different sessions.
    IE6 always creates new session id when opening new window.
    Has somebody solved this problem? It is very urgent!!!
    regards
    Claudia

    I suspect that this is browser issue, not a server-side (CF) issue.  In order to support different cookies in different tabs you will probably need to try to find a Firefox extension to change how the browser uses cookies.
    This extension is advertised as doing what you need.  Note that I have never used this product.
    http://www.nektra.com/products/cookiepie-tab-firefox-extension

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • How to make a SOAP call using the PI 7.1

    Hi All,
    Can you please tell me how can we make a SOAP call using the PI 7.1?
    Thanks in advance

    Hello Shweta,
    Could you please clarify your question? Do you mean you need to call some business system from PI via SOAP? Or do you need to test integration model using SOAP client?
    If the requirement is to make a SOAP call to PI (send SOAP request to PI system), please refer to the guide which Stefan suggested in his post. The general procedure is the following:
    1. generate concrete WSDL in PI (you can do it via PI's Integration Directory);
    2. import generated WSDL to SOAP client (e.g. XML Spy described in the guide or soapUI which is free SOAP client);
    3. create SOAP request message in the SOAP client and send it to the endpoint (in this case, it will be sent to PI).
    This is general procedure for making SOAP calls to SAP PI using external SOAP clients. Please advise if specified steps should be described in more details or if there are any questions from your side regarding them.
    If the question is about calling business system from PI via SOAP, then please refer to SAP Help, configuration of SOAP receiver::
    http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
    My regards,
    Vadim

  • How do you select all paragraphs using the same style in Pages 5.2?

    I'm trying to find how to select all paragraphs using the same style in Pages 5.2 without any success.  I writing a book and I need to able to adjust all my paragraph styles globally.  I see how upgrade my paragraph style when I do something new, but not how to revert back to the orginal template.
    For example, in my custom template for my book I have 12 font for a review questions paragraph style.  I changed the font size for all this paragraph style to 18 font.  Now I want to change it back to size 12 font.  But I have this paragraph style at the top and bottom of my document.  How to I select all of my review questions style so I can make the font change to all at the same time? 
    I just upgrade to Pages 5.2 from Pages '09. 
    Thanks for the help,
    Rob

    The Pages User Guide might help here.
    Better to post your topic in the Pages designated community > Pages: iWork: Apple Support Communities

  • How to make two Application Modules share the same entity cache?

    Hello everyone, I am using JDeveloper 11.1.2.3.0
    I have a little problem in my application through using two AppModules that contain also same ViewObjects. So to be clear one VO is declared in two AppModules. When I commit the view by using AppModule1 and then go to another page that uses the same VO but from AppModule2, I have to commit again, even through the row is previously stored in the database.
    I understood that this came because different AppModules use different entityCache for database communications.
    I am asking if anyone knows any option on how to sync the entity caches from the two appmodules, or how to make them use the same entity cache.
    Thank you

    You can make a copy of the app and give it another name, but it will use the same settings files no matter which you open. Settings aren't stored in the app, but in your Preferences.
    Firefox, being a Windows derivative, might have the capability to use "Profiles" where you'd set it up different for each profile. I don't use Firefox, so I don't know if that option exists.

  • How to make audio of many clips the same level?

    I have a sequence containing many interview clips which all seem to be at different sound levels. Is there any easy way to make all of these the same level? The only way I know how to adjust the level is using the volume level control under audio effects for a particular clip.
    Also i'm wondering whether there is a way to filter out background noise?
    Many Thanks

    If the mic was a different distance etc then you'll never be able to make them all sound exactly the same tone.  But For the background noise I'd really recommend the effects inside premiere I've already mentioned I have found that 90 percent of the time I don't ever need to use audition for interview type edits. I'm able to get by using a denioser and highpass to remove "most background" noises. However I don't film outside very often most of my background noise problems are usaully from too much gain or AC noise. So your scenario might be different than mine for this reason.
    The benifit of the compressor is that it can make your audio stay exactly within whatever range you want without having to keyframe stuff. With the clips you have desribed you'll want to use a different dynamics filter for each group. So put each group on it's own audio track. So group one that you have desribed would go on track 1 since all those clips have similar range etc. Basically with group 1 I wouldn't compress it at all. I'd leave it alone except for lowering it's audio by -2 on the audio track 1. That way all the clips in the first group will be lowered by 2db if you put them all on track 1. You won't have to worry about it's slightly too high peaks as long as you set a dynamics effect with nothing enabled on it besides the limiter on the master track and have the limiter set to -6 since you said that's what you need your max peak to be. If you do this then everything in group one will be handled as far as levels go. (as far as db goes anyways) However if you want to have other things in the project to be higher than -6 then just simply put the -6 limiter turned on track 1 then instead of the master track.
    Then for the second group I wouldn't touch them at all I'd put them on track 2 and just let the limter on the master track keep it's peaks from going to high since it's basically already where you want it. Then if the clips have a hissing noise or something you can add a denoiser and set the reduction to -10 and adjust from there.
    Then for your final set you are desribing -22 to -12 for these I'd put them on track 3 and use a dynamics filter and keep everything disabled except for the compressor itself. For this I'd start with my ratio at 2 and put my threshold at -20 and set my makeup gain at 9 or so. Then from there if it looks like it's way to loud then try lowering the gain and if it looks like its lows are too quite then add the gain back but if it appears to be to loud then simply raise your ratio or lower the threeshold a bit. But I think the settings I have listed will get your to your desired range.
    For the clips that are hitting -0 a lot if they are distorting then you really can't fix distortion but if they are hitting 0 and aren't distorting then you can just simply lower the volume for these you don't need to add any gain since they are already too loud anyways so if you just lower them by like -6 it should get them right within the range you mentioned.
    As far as background noise such as hissing you'll really want to just use Premiere's denoiser effect. Start off by setting the reduction to like -10 and adjust from there. Then for cars passing etc try out a highpass filter and set it to 120 to start and move up there if needed. It will take the bass out of the peoples voices but it won't sound bad unless you start going over 160-170 range it also depends on if the person has a deep voice to begin with or not too though.

  • How to get Bursting file to use the same template as selected by user

    I have created an XML publisher bursting control file for a standard Oracle report Direct Debit letter.
    The user wants to be able to select from a number of different letter templates which is ok except that the bursting control file is fixed to use one template.
    How can I get the bursting control file to use the same letter template as selected by the user when running the report ?
    I am using XML Publisher 5.6.3 with bursting patch.

    Try these following, which come to my mind now as of now.
    In the bursting file, you can do the filtering and apply different template..
    <xapi:template type="rtf" location="/usr/template1" filter=".//DIRECT_DEBIT[./parameter_or_element='first_template']"></xapi:template>
    <xapi:template type="rtf" location="/usr/template2" filter=".//DIRECT_DEBIT[./parameter_or_element='second_template']"></xapi:template>
    second option..
    you can replace the element from the xml in the bursting control file.
    ${ELEMENT_NAME}
    can be used in the template name i guess..
    <xapi:template type="rtf" locale=""
    location="xdo://AR.${SHORT_NAME}.en.US/?getSource=true" translation="" filter="">
    </xapi:template>
    But in this short name has to be in XML file...
    I haven;t tried it...wil try it wheni get time..

  • How to make 2 balls move at the same time

    I am working on an app in xcode and I need to make 2 balls move at the same time. When I try to use the same code for both of the balls, the 2 CGPoints interfere. Here is my code in the .m file.
    @synthesize ball, ball2;
    -(void) onTimer {
            ball.center = CGPointMake(ball.center.x+pos.x,ball.center.y+pos.y);
            if(ball.center.x > 295 || ball.center.x < 10)
                pos.x = -pos.x;
            if(ball.center.y > 435 || ball.center.y < 35)
                pos.y = -pos.y;
    - (void) onTimer2 {
    ball2.center = CGPointMake(ball2.center.x+pos.x,ball2.center.y+pos.y);
    if(ball2.center.x > 295 || ball2.center.x < 10)
    pos.x = -pos.x;
    if(ball2.center.y > 435 || ball2.center.y < 35)
    pos.y = -pos.y;
    [self collision];
    - (void)viewDidLoad
              [[NSTimer scheduledTimerWithTimeInterval:0.04 target:self selector:@selector(onTimer) userInfo:nil repeats:YES] retain];
        [[NSTimer scheduledTimerWithTimeInterval:0.04 target:self selector:@selector(onTimer2) userInfo:nil repeats:YES] retain];
        [super viewDidLoad];
        // Do any additional setup after loading the view from its nib.
    Here is my .h file
    @interface game : UIViewController {
        IBOutlet UIImageView *ball;
        IBOutlet UIImageView *ball2;
    @property(nonatomic,retain) IBOutlet UIImageView *ball;
    @property(nonatomic,retain) IBOutlet UIImageView *ball2;

    What do you mean by the 2 CGPoints interfere?
    You're changing the location of the balls by pos.x and pos.y, where is the code for those? what is it doing?
    Why have two timers?  One timer would work , just have the code move both balls.
    The refresh rate for the screen is 60hz. (60 time a second) You'll get better animation if you stick as close to this value as you can.

  • How can I get iCloud to use the same Apple ID on my Mac and iOS devices

    I have an Apple ID that syncs between my iPhone and iPad. The Apple ID on my Mac is different and I cannot change it so it uses the same Apple ID and iCloud account.

    Sign out of the Apple ID on your Mac and sign in to the one you want to use. Go to System Preferences>iCloud>Sign Out
    Then sign in to the Apple ID you use with your iPhone and iPad.

  • How do I sync 2 iTouches using the same ID?

    I have one synced the the cloud with over 300 songs, but can't get the second one to sync (it only lists 12 songs), using the same ID.

    Welcome to the Apple community.
    Your iCloud and iTunes accounts are different accounts. Music, videos and apps are handled by iTunes.
    There are two iTunes services that you may be interested in. The first is iTunes in the cloud, this enables you to re-download any items purchased from iTunes on any device. The second is iTunes match, this is a subscription service which syncs your entire iTunes music library between all your devices. Note however, unless the content is already on your device, you still need to download it from the cloud.

  • How to sign multiple jar files using the same certificate..?

    hi,
    I want to run my application using Java Web Start.. i am using around 16 different jar files out of which around 13 are 3rd party component jars. I want to sign these jars using the same certifcate..., i am using the follwing code to sign the jars:
    (for the jar file ischeduler.jar)
    keytool -genkey -alias signFiles91 -keystore dtss -keypass dtss1351 -dname "cn=dtss" -storepass decisioncraft
    jarsigner -keystore dtss -storepass decisioncraft -keypass dtss1351 -signedjar signedischeduler.jar ischeduler.jar signFiles91
    keytool -export -keystore dtss -storepass decisioncraft -alias signFiles91 -file ischeduler.cer
    keytool -import -alias DCA2 -file ischeduler.cer -keystore Impischeduler -storepass ischeduler
    (for the jar file ischedulerclient.jar)
    keytool -genkey -alias signFiles92 -keystore dtss -keypass dtss1351 -dname "cn=dtss" -storepass decisioncraft
    jarsigner -keystore dtss -storepass decisioncraft -keypass dtss1351 -signedjar signedischedulerclient.jar ischedulerclient.jar signFiles92
    keytool -export -keystore dtss -storepass decisioncraft -alias signFiles92 -file ischeduler.cer
    keytool -import -alias DCA3 -file ischeduler.cer -keystore Impischeduler -storepass ischeduler
    but when i use the above signed jars in my application i get an error saying:
    "jars not signed by the same certificate"
    can someone plz tel me wher is the error....thanx
    andy

    Well for mulitple signing of jar files you can use ANT tool. Its easier and faster.
    Regarding the present problem -- hmm.. well it looks like you are using 2 different alias names for signing the jar file. Try using the same alias name and that might solve your problem.
    regards
    Saby

  • How to make my iTunes Library use the music which is already on my NAS?

    Hi there,
    I know there have already been some posts around the forum about having the iTunes library on external harddrives or NAS's.
    Though my question is different to that question and the solution for those can't seem to cater for my issue.
    In the other posts, most of them have the music on their MAC's or MacBooks already, and it was more of a migration of their iTunes Library.
    My situation on the other hand is this:
    I have recently bought a MacBook Air and sold my PC Desktop. Before I sold it, I backed up everything to my NAS, so my music is now sitting on the NAS.
    I am now trying to have my iTunes library on my NAS instead of my MacBook Air. Since my MacBook Air is only 128GB, I cannot store all my music on my MacBook Air then migrate it to the NAS (Via some of the solutions I've found online). So those solutions would not work for me.
    That is why I am here, asking this question:
    If my music is already on the NAS, I have a clean iTunes (No music in it), and I don't mind if I my music folders get re-arranged from the doings of iTunes. How do I make my iTunes Library accommodate the songs I have on the NAS?
    The reason I want to do this is because currently I have an iPhone, iPad, MacBook Air and Apple TV. My home sharing is on, so as you can imagine, if I wish to stream songs, it would be handy to have them in iTunes.
    This is my first question, once this is solved, hopefully it will simultanously solve a second question I have in mind (Regarding having all my TV shows and Movies to be in the iTunes Library as well, the contents are currently on my NAS too).
    Your help would be greatly appreciated, as I am new to OS X (Always been a Windows person, as I was a big gamer).
    So far, I have to say, my experience on OS X and the Apple ecosystem is fantastic!

    Typing in all caps indicates shouting is considered rude and is difficult to read.  Many simply do not read such posts.
    The music sync is one way - computer to ipod.  The exception is itunes purchases.  File>Transfer Purchases
    You need to copy everything from one computer to the other.

  • How is it possible to make sure that LV uses the same thread for several threadsafe DLL calls?

    Hello,
    i have a thread safe DLL and most functions are called from serveral threads from the LV apllication without problems.
    In case of an error i have to call an error handler function in this DLL (like WinAPI: GetLastError()) from the same thread which has called the function that failed before.
    I can't use the user interface execution because some functions need a long execution time and i don't want to balk the user interface.
    All other executions than the user interface execution have more than one thread and in most cases the DLL function calls were executed from different threads - so the error handling doesn't work...
    Any idea?
    Thanks for your help!

    Hmmm....
    How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
    "Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
    Not sure on the above.
    Please correct me if this is wrong!
    Ben
    Message Edited by Ben on 07-19-2007 08:26 AM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for