Isco Secure Services Client version 4.0 - where can I get it from ?

Gents, Does anybody know where I can download this software from ..? I have used it several months ago from meeting house when it was called AEGIS SecureConnect 4.0 ( now been acquired by CISCO) .. from The Cisco software center is says unavailable as yet .. any ideas ..? I have a copy of AEGIS SecureConnect 4.0 but I am wondering whether cisco supports it or do I need to get the one with the Cisco footprint ..?
Appreciate any input ..

check the following url
http://cisco.com/public/support/tac/tools.shtml
But you need valid contract with cisco to download these versions.

Similar Messages

  • I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please?

    I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please? (I bought the Photoshop Elements and Premiere Elements pack, but have only just installed and started to use).

    Hi,
    You can find the Help Archives at Adobe Premiere Elements Help | Archive
    Regards,
    Premiere Elements Team

  • What RAM do I need and where can I get it from?

    Hi all,
    I know this is probably a simple question, but I just want to make sure I don't mess up my computer! I have an old school DV iMac, and bought the Mac OS X upgrade not too long after it came out (which is rather a while ago now!), but couldn't install it became I don't have enough RAM. And I obviously have just put it off and off. Now I'm at uni, and want the computer to work as well as it can for my mum, because she's even worse than me when it comes to computers. So, anyway, I need RAM. What type do I need and where can I get it from fairly cheaply? And how much would you recommend I get? My friend says he knows how to put it in, so all okay there hopefully/
    My computer's details:
    Processor info: PowerPC G3
    Machine speed: 400MHz
    OS: 9.2.2
    Built-in memory: 64MB
    I remember being able to get more details than this from somewhere on the computer, but I can't remember where...I haven't used it for 6 months or something, and am obviously getting forgetful.
    Hope someone can help. If you need to know anything else, tell me where to get the info from and I will tell you!
    Cheers,
    Fran
    DV iMac   Mac OS 9.2.x   It's lime green...ooh...

    Hi,
    I just bought some RAM from Crucial.
    If you go to www.crucial.com/uk and follow the Crucial Memory Advisor Tool, you should be able to find the RAM for your Mac.
    1 GB sticks are pretty good value at the moment (they've even gone down a few pounds since I bought mine a week ago) and if you enter this code (found it on aonther thread here) you might get a couple of pounds knocked off the total: CUSTOMPC
    There's also places like Kingston & Cancom to try, as well as Misco.co.uk. But Crucial select the recommended RAM for your Mac.
    Also, when you think you've found the right RAM and want to buy it, try the Apple agent chat, and double-check with them.
    Hope this is useful.

  • I have macbook pro   i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

    i have macbook pro   i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?

    I would recommend wiping the system and reinstalling the OS for any used system. OS X does not have any "unlocking pin" of sorts so this may be from some third-party software on the system. The system does have a "firmware password" option that can be set to prevent booting to alternative boot environments (ie, external hard drives, safe mode, etc), but this will not prevent system updating.

  • My computer will only run CS3....where can i get this from?

    My computer will only run CS3....where can i get this from?

    Simon,
    You may try to buy elsewhere. You may come across offers of new and unopened box sets, and used ones. There is quite a number of rules concerning the legality of taking over Adobe software from others, in some cases requiring a licence transfer.

  • Where can I get xMII from ?

    Hi All,
    I wanted to install xMII 12.0 or x MII 11.5 but I could not find the setup file for xMII anywhere.
    I tried on SAP Market Place and I found link there but when I click on that link to download that, it says this links has been disabled.
    Can someone please advise me that where can I get xMII setup file to download?
    It will be appreciated.
    Thanks,
    Haresh Solanki

    Hi Jeremy,
    I navigated to the right place and click on xMII link but nothing happens. I can't navigate any further then this.
    Secondly, I searched for xMII or xMII 12.0 then it gives an error like...
    "All corrective software packages, for SAP NetWeaver 2004s and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here."
    Could you please advise me on that?
    Thanks,
    Haresh Solanki

  • Apple Intermediate Codec, Uncompressed 10-bit 4:2:2 where can i get format from.

    Apple Intermediate Codec, Uncompressed 10-bit 4:2:2 where can i get the format from.

    AIC is an Apple QuickTime codec and is only available on Apple platforms.  It is an all-iFrame format and is normally used for high def video (HDV and AVCHD).   FCE automatically transcodes HDV and AVCHD video into QuickTime/AIC when you capture/ingest the video from your camcorder.
    AIC supports 16:9 aspect ratio, 8-bit 4:2:0 and can handle variable data rates.  Supported frame sizes/rates are 720p30, 1080i50 and 1080i60.  There is a bit more info in this article:  Final Cut Pro 5: About HDV and Apple Intermediate Codec.
    You asked this question in the Final Cut Express Forum.  FCE can't use 10-bit 4:2:2 video, nor can it use Apple ProRes.  For 10-bit 4:2:2 suppport you would need ProRes and Final Cut Studio.

  • I can't use my ipod touch 5th generation on my imac G5, needs itunes version 10.7  Where can I get that?

    My imac G5 is old, but still works beautifully!  I just bought the ipod touch, 5th generation and itunes wants a version (10.7) that I cannot get on their site!  Any ideas? I tried hooking the ipod up to the ipad (2nd), but I get no reaction whatsoever!  Do I have to return this ipod?

    iTunes 10.7 requires an Intel Mac and isn't compatible with yours.
    (89303)

  • How do I de-install iTunes version 7 and where can I get iTunes 6 from?

    itunes 7 is causing more problems than its worth and I really really really want to roll back a release.
    How do I do it?
    Neil

    The problem that itunes 7 has caused is that it has quarupled the resolution of the iPOD movie export from Final Cut. On the face of it this is good news, the proelm though is that the half hour programs I make are now 400Mb large, and are therefore unusable.
    So I need to roll back iTunes and Final Cut to whatever the original presets were in Final Cut soi I end up with half hour video podcasts being a realistic 160 to 180Mb.
    Until we all have ADSL2Plus, of course, in which case I'll upgrade to higher resolutions.
    Fo rthe first time on 20+ years of using Apple products, they have caused me a major major problem.
    Cheers
    Neil

  • I need to install a downlevel version of Garageband - where can I get it?

    I have a Mountain Lion machine and I can't upgrade to Mavericks due to other installed software conflicts. When I bought my machine (on ebay) it didn't have Garageband installed and I didin't know I needed to install it. How can I get a backlevel copy of garageband and install it on my Lion?

    backlevel copy
    I don't know what you mean, but you can buy GarageBand at the App Store.

  • HT4623 I want to download ios6 in my iPad but I  did't see software Update tap,so where can I get it from?

    I didn't see my ios6 in general setting so how can I update my software

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Where can I get iTunes for 64 bit Windows XP?

    I am running Windows XP 64 bit Pro. I downloaded iTunes for Windows, started setup and I got message which says that I should download 64 bit iTunes version.
    So where can I get iTunes for Windows XP 64 bit?

    According to the following document, iTunes is not supported for 64 bit XP
    http://support.apple.com/kb/HT1426
    CG

  • CKIP / LEAP on Secure Services Client 5.1.0.39

    Hello,
    I am in the middle of converting over to a LWAPP infrastructure as well as converting over to using the Cisco Secure Services Client.
    Because I have a very large number of IOS based AP's still in service that are running LEAP with CKIP, I have a need to simultaneously support both the LWAPP infrastructure and the old IOS based infrastructure at the same time (at least for now).
    I have the SSC working fine with my LWAPP WPA2/PEAP infrastructure, however I cannot get it to work on the old IOS LEAP/CKIP infrastructure. There do not appear to be any CKIP options in the SSC, and I have tried all of the other options (including all of the TKIP options) and none seem to work.
    So my question is, does the SSC v. 5.1.0.39 (the latest version) not support CKIP, or am I missing something.
    Thanks for any advice.
    Neil

    After getting no response here I opened up a TAC case with this exact same question.
    Per the TAC: CKIP is not supported in the CSSC.

  • Network becomes limited or unavailable as soon as i connect to cisco anyconnect secure mobility client, version - 3.1.05170

    Hiee,
    I am using cisco anyconnect secure mobility client, version - 3.1.05170 , in my windows 8.1 PC to access vpn to my office desktop. But as soon as i connect cisco anyconnect client, my wifi networks becomes limited or unavailable. Thus, i am not able to get remote access to my office desktop. And not even able to access any other websites also. But as soon as i disconnect from the cisco anyconnect vpn client, every thing becomes normal, and the exclamation mark from the network icon also disappears.
    kindly help me in this regard.
    Thanks and regards
    Neeraj

    There are a few things to consider here:
    - The IPSec VPN client is EoL, so even if we consider this as a bug, it wouldn't be fixed
    - fixing the file server access would break the DHCP renew which means there is no completely clean way to fix this, at least not at the IP level since the client can't route to the same destination using 2 different paths.
    Is there any chance we could do a static policy NAT for the DHCP traffic so it appears to come from another IP? It's twisted and it may not work (the client might use the DHCP server IP embedded inside the payload and not the source IP) but if it does, then we'd fix the overlap.
    Could the server use another IP address for the DHCP service (much like using a loopback for a certain service on a router?)
    A third solution would be to NAT the destination server IP on the ASA for traffic from the IP pool going to the server. We'd need DNS doctoring as well to resolve the server's name to the NATted IP. This way the server would appear from the VPN client as being at a different IP, thereby fixing the overlap.
    All these potential solutions are quite involved... you may be better off wityh a simpler design: splitting of your server into 2 or using something else to do DHCP for the VPN clients.

  • I have a problem with my Internet Security and the new Firefox, where can I get the previous version which I had before my system crashed?

    Hi I use CA Internet Security Suite which checks ALL pages and searches, but it does not work with this version, also I wish to use Goggle Toolbar which ALSO does not work with this version where can I get the previous version? As my harddrive crashed I have had to install windows 7 and this version doesn't seem to allow me to change my homepage, why is this? Cheers Ernest

    You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Maybe you are looking for