IScroll 2 Settings for 17" Powerbook G4?

Hi,
I have a 17" Powerbook G4 1.33Ghz, 2gb of ram & 160gb 5400rpm Hard drive running 10.5.8 with all updates.
I miss the two finger scrolling so i downloaded iscroll2 but no matter how i seem to configure it it is aither too slow or too fast or too jerky, you get the picture!
I have used it sucsefully in the past put am having no joy this time, it also seems to behave differently after restart etc.
Does anyone have specific settings they can post?
Thnaks.

I can't help you but I have the same problem, with one iBook I used to own iScroll2 worked perfectly but not with this PowerBook 12" which I have. I have noticed that once you install iScroll a setting menu appears on OS X's own System Preferences, but that seems to conflict with iScroll's settings. Isn't there any way enable OS X's own menu without iScroll2? Clearly this is just Apple blocking this feature from some machines so maybe there is a command to override this or something?
EDIT: I'm running OS X 10.5 Leopard.

Similar Messages

  • Master/Slave settings for HD and SuperDrive

    i recently updated the hard drive to a 17" usb2 iMac flat panel, I upgraded the standard 80GB HD with a new maxtor 250GB disk, the problem is that the transfer rate from dvd/firewire/hd to hd are superslow.
    what i don't know is the jumper settings for the two units, i used slave for the superdrive and master for the hard drive, is it possible that they go inverted?
    thanks
    g

    I don't know if that's causing the low data rate, but Apple sets the superdrive to master and the harddrive cable select (see http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G4/iMacNov03/index.html). I know from own tests that the 17" iMac G4 is capable of 50 MB/s for the internal HD.
    Mac mini G4 1,42/512/80, PowerBook G4 12" 1,5/1,25/80 + 23" ACD   Mac OS X (10.4.7)   as well as iMac G4 17" 1,25/2/320, PM G3 DT 500/576/20 + 17" Syncmaster 710T

  • I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

    I have Firefox 3.6 on my Mac OSX 10.6.5 and it will not save settings for igoogle or my password for googlemail or hotmail. Can you help?

    Very weird day in Firefoxland
    First on a Powerbook G4 running 10.4.11 I respond to an invitation to upgrade to Firefox 4 (like a lot of others). Long story short, I wind up losing the browser altogether -- including all bookmarks. Why? Because neither the Firefox homepage (or CNET downloads) makes it clear that 4.0 is for OS 10.5 only! Amazing!
    Then I try to register to post a reply in a thread that crits Firefox for not making this System Requirements info upfront clear. But the Register page I’m taken to (https://support.mozilla.com/bs/users/register) is in SERBO-CROATIAN!!
    Then I try to log into Chat a couple of times and when it’s not CLOSED its a long line waiting and THEN it closes.
    WOW!! Are the wheels off the wagon here or what!?!

  • Is there any way to change the settings for the built in isight camera?

    I'm sure someone else has probably already asked this, but is there any way to change the settings for the built in isight camera? The resolution is horrible.

    Welcome to  Discussions, Prissymissysays
    The last Apple-published resolution data I saw said that iSight's resolution is 640x480 VGA. I do not know of any way to change iSight's resolution, but that level is plenty of quality for my webcam needs.
    The software you use to operate your iSight controls it, so specific answers will depend on what software you are using when you need more resolution. Check Help in that application to see if it can change iSight's resolution.
    Some software, such as Apple's QuickTime 7 Pro allow you to change iSight's video quality and compression level with its QuickTime Player > Preferences > Recording > Quality: setting. You can add iGlasses software to manually override some iSight settings that are otherwise controlled automatically by the software using iSight. However, I do not think either of these options really changes iSight's resolution.
    Check whether your iSight's lens cover has fingerprints or smudges on it. Then check iSight's image quality of your face in full sunlight about two feet from the lens. Best image quality requires more light than what most people would consider normal room lighting.
    If you are still having problems, consider the applicable suggestions from How to Troubleshoot iSight.
    If you need better resolution than iSight can deliver for some special imaging requirement such as close-up or high-accuracy images, you may need to consider using a different camera that better meets your special needs.
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • Modem Settings for Road Runner Dialup

    I am unable to log on to Road Runner dialup.
    I have this Apple internal modem:
    Modem Model: Jump
    Interface Type: I2S
    Modulation: V.92
    Hardware Version: Version 1.0
    Driver: MotorolaSM56K.kext (v1.3.9)
    I have tried every combination of settings I could think of, with and without Road Runner tech support assistance and am still unable to connect and complete authentication. I have verified user name and password to be correct.
    Does anyone have a list of settings for connecting to Road Runner, or other suggestions?
    Thanks

    Thanks a lot for answering.
    I believe the modem is working. I can hear it dial, hear the handshake and apparent connection. The modem status display shows "Connecting" then "Authenticating" and eventually "Disconnecting". I get an Internet Connect report that "Authentication Failed". I have verified that my Account Name and Password are correct, by logging on to the Road Runner Web Mail site. I went through that in detail with their tech support.
    How can I disable v.92 in OS X 10.5.6? I tried disabling error control and data compression, but that seemed to have no effect. What about these settings:
    Send PPP echo packets
    Use verbose logging
    Use TCP header compression
    Would any of those PPP settings have an effect on Authentication?
    So far, the only way I have been able to connect and log in by dialup is with a PowerBook G3 (Wallstreet) in OS 9 with a PC card modem. My normal connection is a cable modem and that's no problem, but I wanted to test dialup as a backup. Now, it's a challenge.
    Thanks again for your help.
    Message was edited by: Dick Chanslor

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Adobe cloud to save automatically actions, stuff and settings for example?

    Hi!
    I had a hard-disk error and had to reinstall everything and with that I lost my photoshop actions...
    Can't adobe cloud save automatically / sync this kind of stuff and personalize settings for example?
    Thanks!
    Francisco

    Hi Francisco, here are the details around sync settings and items that can be synced as of now: Photoshop Help | Sync settings using Adobe Creative Cloud
    Thanks,
    Atul Saini

  • HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again.  The server returned the error: Mail was unable to log in

    I can send but cannot recieve email
    This is the messege I am gewtting:
    There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
    The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
    The server returned the error: Service temporarily unavailable

    Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

  • ITunes looses photo sync settings for Apple TV (1st gen.)

    Since the update to the new Photo app on my Mac, iTunes forgets the photo sync settings for my Apple TV (1st. generation, 160 GB HDD).
    Every time I open the photo section of the Apple TV sync settings, all the options are turned off. Then I mark a couple of albums and sync the Apple TV >> all album appear on the Apple TV.
    But after closing and re-opening iTunes in the photo settings everything is unmarked again. So on every following sync the photos on the Apple TV are easily erased :-( Resync them to the Apple TV takes hours (>30'000 photos!).
    All the other sync settings in iTunes remain intact.
    Environment:
    - MacBook Pro Retina 15" with the latest SW (Mac OS, iTunes, Photo App, etc.)
    - Apple TV 1st gen 160 GB HDD

    Restarting iTunes resolves the issue in the majority of cases, if it doesn't my second guess would be your security software.
    What really seems strange here is that there have been no updates since well before Xmas, so after initially setting it up, the first update would have brought you right up to the most recent (and indeed the very last) .
    Agh, how silly of me, I see it's iTunes you have updated.
    If that's about all you've changed, you might want to try reinstalling iTunes and bonjour.
    Message was edited by: Winston Churchill

  • Different rich text/plain text settings for different accounts?

    I use Mail for both my work email (MS Exchange) and my personal email (webmail/IMAP). Many of my coworkers use Outlook's rich text formatting options, so I need to have my work emails go out as rich text. However I'd like to have my personal emails go out as plain text.
    I can set Mail to create new messages in plain text, but to reply in the same format of the original message. That takes care of everything EXCEPT when I compose a new message using my work address... in that case it goes out as plain text, and my coworkers complain that they can't use formatting, because their copies of Outlook are in turn configured to reply in the same format as the original message.
    So ideally what I'd like is to have two different formatting settings for my two different accounts. Anyone know how this might be done? Any plugins, etc., that might accomplish this?

    Since you are running Jaguar, Jaguar and Panther Mail do not support composing in HTML and this includes when forwarding a message received that was composed in HTML.
    Since Jaguar and Panther Mail do not support composing or forwarding HTML, you can't embed images or photos in the message body anyway.
    RTF with Tiger Mail is really HTML and although Tiger Mail does not include an HTML composer/editor, you can copy/paste HTML format from a web page and forward HTML received.
    Images/photos and single page PDF attachments are revealed as inline or viewed in place within the body of the message by default which cannot be turned off. This applies to received and sent messages which is not the same as being embedded. Embedded requires HTML and an embedded attachment is not a true attachment. All Mail.app versions render HTML received but you cannot attach a photo or image as embedded with Jaguar or Panther Mail so it doesn't matter if you use RTF or Plain Text in regards to photo/image or single page PDF attachments which appear as inline or viewed in place within the body of the message by default regardless.
    When you use Plain Text for message composition, the receiving mail client renders the text in whatever font the reader chooses.
    IMO, everyone should use Plain Text for message composition. Messages would be boring to some but the majority if not all problems experienced with email would be eliminated if HTML was banned from message composition.

  • TS2446 I just got my iPad,  I have an iPod. When I go to put apps on it says my apple I'd Is disabled. I have reset the passwords. Somehow I have two id's?  I've gone into settings for apps signed out and back in with the new p.w.  I can't think of what e

    I just got my iPad,  I have an iPod. When I go to put apps on my new ipad it says my apple ID Is disabled. I have reset the passwords. Somehow I have two id's?  I've gone into settings for apps signed out and back in with the new p.w.  I can't think of what else to do to get the disabled block off.  Any ideas?? Thanks

    See this Apple document for help...
    http://support.apple.com/kb/ts2446

  • When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself.

    I have had a problem with my iphone 4s for some time now but I have just been so busy to try and fix it. When I try to disable cellular data in the settings for my apps it will toggle fine, but once I exit and go back in to the cellular settings its back on again all by itself. However, even though it says the data is on, I can’t use the data when I don’t have wifi. I tried restoring my phone a few times and the last time I did that, it wouldn’t turn my service on so I had to talk with a Verizon agent for a long time trying to fix it and finally they simply sent me another phone. I thought hey new phone, this part will be fixed. However, I got my service to work but it’s still the same problem with the cellular data. I have just left it alone and not worried about it, but it’s still not fixed and thought I could ask on here if anyone had any ideas. It has something to do with the apps actually installed on the iphone. Apps like the mail, safari, settings, itunes apps, etc. All my other apps turn on and off just fine. Does anyone have any ideas?

    Read the User's Guide... it covers how to backup and sync the device as designed.

  • How the files are decreasing from RBS storage after some time i delete docs from document library, where shld I check the settings for this?

    HI
    I created a web application and configured  rbs storage ,
    I uploaded documents (for ex: 18 number)
     after uploaded  documents ,  and observed the RBS storage folder, number of files are increasing (39 number) , its working fine
    and also  I run the querys to check the rows increasing or not , (when I upload new doc rows are increased its fine also)
    select count(*) from alldocs
    Select count(*) from AllDocstreams
    but when I delete some docs from document library ,
    1)the doc itself deleted from document library
    2)when I check the rbs storage  there is no number of files are decreased(its still 39 files ), its same as  before doc deleted from doc library
    after some time I found the number of files are decreasing from RBS storage folder in sql server,
    here I want to know the how the files are decreasing from RBS storage  after some time, where  shld I check the settings for this? and how I control on it
    here how I know the settings for cleaning up orphan BLBOS how  these deleted BLOB
    adil

    1. WHen you delete the file from Sharepoint, it is still present in Recycle bin. This is a default setting in sharepoint for 30 days. Once files are deleted fro Recycle bin, it can also be delete from RBS
    2. There is a RBS cleanup job which deletes files from RBS. for more info check 
    http://mehuljamod.blogspot.in/2012/09/remote-blob-storage-maintainer-rbs.html

  • How to change default settings for a video generator?

    I'm using a video generator (Lyric Media's Pan Zoom Pro) many times in the same project, and have to change the default settings for each new instance of the generator that I create. I'm wondering if there's any way to change the default settings for a generator (i.e., length of clip, individual slider and checkbox settings in the "controls" tab) so that each new instance automatically has my customized settings when I first open it.
    Thanks.

    That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

  • Settings for updating info structures of purchasing and inventory managemen

    Hi Experts,
                    Infor structures of MM aren't updating in my system. Is there any indicator to be maintained in material and vendor master for updating these info structures? and kindly tell me the settings for this.
    Thanks
    Harmandeep

    Plz some one help

Maybe you are looking for