ISCSI issue - can't detect the volume

Hi,
I configured iSCSI LUN on the NSS324 and put one of the NAS interface in to the iSCSI VLAN that has jumbo packet size support. Attached are my config screenshot.
From the NAS, I can ping my vmware server's iSCSI interface at 9000 byte packet size so the underline network is working.
[~] # ping -s 9000 172.24.200.11
PING 172.24.200.11 (172.24.200.11): 9000 data bytes
9008 bytes from 172.24.200.11: icmp_seq=0 ttl=64 time=1.5 ms
I tried auto discovery of iSCSI volume and manual too but none of them seems to detect my iSCSI LUN.
Any suggestions on troubleshooting efforts?
Thanks in advance,
Sam

Sam,
Please make sure you're running on the latest firmware. Which gives add functionality to the ISCSI.
Also when creating the LUN you might have to give the NSS just a little time to allocate the space you just created. I have had the NSS take about 10 minutes or so before VMserver was able to connect to my target depending on how much space you allocate.if still are not able to connected , it could be the ISCSI initiator . if you are using Chap authentication you might want to create a iSCSI target without security for testing. If you're able to connect without Chap, then you know where problem is.
Now you want to make sure the ISCSI is connected (Raid managment --> ISCSI --> see if the initiator is connected to target)
Once all this is verified and still can't get connect via ISCSI then you might give us a call so we can take a look.
Please call 1-866-606-1866 and open a case with Small Business Support Center for help.
Thanks,
Jason Bryant,
Cisco Support Engineer

Similar Messages

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and slide the scrub through songs. This has always worked for me until now. I have not changed any settings

While playing music on my iphone 5, i am now unable to play, pause, or skip songs while my phone is locked. I can still change the volume and scrub through songs. This has always worked for me until now. As far as i know, i have not changed any settings. This is whle my phone is locked both on the slide up toolbar/menu interface and on the normal screen before i slide to unlock.

I skimmed through this very long post but from what I read, this sounds much more like a coverage issue with your network than a device issue. I have not seen or heard of this issue before and I do not have this issue personnally and & I use the music app quite frequently while working in the yard.
The DND feature should not be a factor at all if you're sure it's turned off. I always recommend restarting your phone by holding down the home button + the lock button for 10-12 seconds until the Apple logo appears. Once the phone reboots, do a test to see if this has helped to resolve the issue.
If not, go to Settings > General > Reset > Reset Network Settings. Then, test it out again. Post back if neither of these solutions solve your issue.

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append

Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H.

TS3274 How can I get the volume to work?

We have an iPad but can't get the volume to work?

Alright now if you are talking about issues using Safari, here a few things that you can try.
1. Quit Safari completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
3. Clear Safari. Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

I can't turn the volume up or down on my MacBook Pro?

I can't turn the volume up or down on my MacBook Pro? It shows a kind of "stop" sign? I can get the speakers to work by connecting my headphones to the computer and choosing the sound to be on the speakers, but as soon as I take the headphones out, I can't get any sound out of the speakers..
Sometimes there is a "Red" light coming out of the AUX-port?

Hey vgamborg,
Thanks for using Apple Support Communities.
This article should help you troubleshoot issues playing sound from the built-in speakers. Try the steps listed, and I quoted a part about the red light.
Troubleshooting issues with no audio from built-in speakers on Macs
http://support.apple.com/kb/ts1574
Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
Have a nice day,
Mario

I can't change the volume of the background music in my project even if I put it to 0%

I can't change the volume, I've tried to put it down with Itunes, stop and start again my computer but nothing work... PLEAAAAAASE HELP...

Solved it, there was a problem of the same music put it twice!

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

I Tune can't detect the Phone

Recently I have resored Every thing enternally in phone. After that the phone only got charging not starting only shows the apple logo...even itune can't detect the phone...so what should i do?....howi recover it?

Put the device in DFU mode (google it) and restore as new via iTunes.

Can I use the volume sliders after adding automation to tracks?

After adding a whole bunch of automation to pretty much every track on my first real project on GarageBand, I started trying to mix, and it seems the volume sliders are all locked up on the tracks with automation. I really don't want to have to add a million more automation points just to mix the song properly, so if anyone has a solution, that would be greatly appreciated!
Thanks!

Can I use the volume sliders after adding automation to tracks?
no
if anyone has a solution
you can select all the points by clicking in the header, and then drag them, though

How can i increase the volume of 6plus when make phonecalls

How can I increase the volume when I make the phonecalls. I already tried the normal method like press the slide volume button but it doesn't work.Is there any other methods to solve the problem?

Did you try that while on a phone call? Also there are different volumes for different devices. If you have your earbuds in and set a volume that will change the volume for when your earbuds are in. If you have a bluetooth headset you can set a volume for that.

WRT54GS Can not detect the router

We lost the internet connection a few days ago for a couple of hours and since then had to reset the modem and when I try to set up the router with the Easy Link Advisor I get can not detect the router. I am using the router to access the internet and it can't be detected???
I have powered it off enough times and then some and need to get this running to use the laptops.
I am running ver 7 firmware that it came with but I don't know what the exact version I am running or gor that matter where to find it.
Thanks

okay went through the firmware upgrade and installed it through 192.168.1.1 to admin tab and upgrade. it got to the reboot part and hung there for a bit, i hit continue or what ever it said and came back upwith a dns error and page unreachable. version installed is what i downloaded 7.50.5. i am still having the same problem, all the lights are lit that are suppossed to be lit, and i am on the internet and running through the router, and when i go into easylink advisor and start the setup process i have to go through the entire thing including selecting the router (which it should know what router it is) though removing the power cord and waiting and still told that it can not detect the router. i have no idea where to go from here. thanks!

ISCSI issue - can't detect the volume

Similar Messages

Maybe you are looking for